Girisha Kanuvanahalli Bettaiah
Research Subjects
Girisha Kanuvanahalli Bettaiah has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Manjunath S. H.
BGS Institute of Technology, Adichunchanagiri University, B G Nagara, Mandya, Karnataka, India
2 shared publications - Thejaraju Rajashekaraiah
Christ University
2 shared publications - Bs Dayananda
MS Ramaiah University of Applied Sciences
1 shared publication - Chanduveetil Ahamed Saleel
Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, Saudi Arabia
1 shared publication - G. C. Chethana
BGS Institute of Technology, Adichunchanagiri University, B G Nagara, Mandya, Karnataka, India
1 shared publication - Manjunath S. Honnaiah
Department of Mechanical Engineering, BGS Institute of Technology, Adichunchanagiri University, BG Nagara, Mandya 571448, Karnataka, India
1 shared publication
Latest Publications
- 7 July 2025
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
TRIBOLOGICAL STUDIES ON DRY AND WET SLIDING BEHAVIOR of A356.1 ALLOY REINFORCED WITH ZIRCONIUM NANOMETAL MATRIX COMPOSITES
Aluminum nanometal matrix composites (Al-NMMCs) have emerged as promising materials with enhanced mechanical, thermal, and electrical properties that are used in high-performance applications such as automotive, aerospace, military, and transport compared with conventional aluminum alloys. The incorporation of nanosized reinforcements, such as zirconium oxide nanoparticles, into the aluminum matrix offers significant improvements in strength, stiffness, and wear resistance while maintaining lightweight characteristics. Pongamia oil is a sustainable and environmentally friendly lubricant that has been used in recent advancements to improve the performance of these composites. In this research, an A356.1 aluminum alloy reinforced with zirconium oxide nanoparticles was produced through the stir casting method at a temperature of 650∘C for various weight percentage ratios like 1.0%, 2.0%, 3.0%, and 4.0%. The prepared nanoparticles were characterized by PXRD and SEM. Wear tests were carried out on pin-on-disc apparatus with varying parameters of load, time, and speed for dry sliding wear and wet sliding wear. Results showed that nanometal matrix composites of 4.0% reinforcement of wet sliding wear and coefficient of friction have improved tribological properties.
- 7 July 2025
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
TRIBOLOGICAL STUDIES ON DRY AND WET SLIDING BEHAVIOR of A356.1 ALLOY REINFORCED WITH ZIRCONIUM NANOMETAL MATRIX COMPOSITES
Aluminum nanometal matrix composites (Al-NMMCs) have emerged as promising materials with enhanced mechanical, thermal, and electrical properties that are used in high-performance applications such as automotive, aerospace, military, and transport compared with conventional aluminum alloys. The incorporation of nanosized reinforcements, such as zirconium oxide nanoparticles, into the aluminum matrix offers significant improvements in strength, stiffness, and wear resistance while maintaining lightweight characteristics. Pongamia oil is a sustainable and environmentally friendly lubricant that has been used in recent advancements to improve the performance of these composites. In this research, an A356.1 aluminum alloy reinforced with zirconium oxide nanoparticles was produced through the stir casting method at a temperature of 650∘C for various weight percentage ratios like 1.0%, 2.0%, 3.0%, and 4.0%. The prepared nanoparticles were characterized by PXRD and SEM. Wear tests were carried out on pin-on-disc apparatus with varying parameters of load, time, and speed for dry sliding wear and wet sliding wear. Results showed that nanometal matrix composites of 4.0% reinforcement of wet sliding wear and coefficient of friction have improved tribological properties.
- Open Access
- 19 December 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 59 (1) , 72
Characterization of Aluminium Alloy LM6 with B4C and Graphite Reinforced Hybrid Metal Matrix Composites
Hybrid metal matrix composites (MMCs) are increasingly important in aviation, marine, automotive, and industrial manufacturing due to their ability to enhance the mechanical and chemical properties of composites. The study aimed to understand the fabrication, mechanical properties and microstructural properties of LM6/B4C/Gr composites. An aluminium alloy (LM6) is the base metal, having properties of less weight, medium strength, and excellent castability. The addition of B4C and Gr enhanced the tensile strength, hardness, and wear resistance of the composites, while maintaining good ductility. Boron carbide is a lightweight and extremely hard material with excellent wear resistance and high thermal stability. It has a specific modulus that is almost two times higher than that of aluminium, meaning it can provide superior stiffness and strength while maintaining a low weight such as drive shafts, housings, and structural supports. The addition of graphite improves the lubrication properties of the composites. Composites were successfully fabricated through a stir casting process, with the uniform dispersion of boron carbide and graphite particles in the aluminium LM6 matrix. The hybrid metal matrix composites are fabricated by five different combinations of B4C (1, 2, 3, 4, 5 wt%) with constant wt% of graphite (1 wt%).The fabricated samples of hybrid composites used to find the mechanical properties and microstructure analysis. The test results reveal that the tensile strength and hardness of the composites increased with an increase in the weight percentage of reinforcements, and the percentage of elongation decreases with increasing the reinforcement particles. The boron carbide (B4C) and graphite (Gr)particles in a matrix material are analyzed by a scanning electron microscope (SEM). Energy dispersive X-ray analysis (EDX) is used to evaluate the microstructure and chemical composition of the composites, providing valuable insights for their design and optimization.
- 19 December 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 59 (1) , 72
Open AccessCharacterization of Aluminium Alloy LM6 with B4C and Graphite Reinforced Hybrid Metal Matrix Composites
Hybrid metal matrix composites (MMCs) are increasingly important in aviation, marine, automotive, and industrial manufacturing due to their ability to enhance the mechanical and chemical properties of composites. The study aimed to understand the fabrication, mechanical properties and microstructural properties of LM6/B4C/Gr composites. An aluminium alloy (LM6) is the base metal, having properties of less weight, medium strength, and excellent castability. The addition of B4C and Gr enhanced the tensile strength, hardness, and wear resistance of the composites, while maintaining good ductility. Boron carbide is a lightweight and extremely hard material with excellent wear resistance and high thermal stability. It has a specific modulus that is almost two times higher than that of aluminium, meaning it can provide superior stiffness and strength while maintaining a low weight such as drive shafts, housings, and structural supports. The addition of graphite improves the lubrication properties of the composites. Composites were successfully fabricated through a stir casting process, with the uniform dispersion of boron carbide and graphite particles in the aluminium LM6 matrix. The hybrid metal matrix composites are fabricated by five different combinations of B4C (1, 2, 3, 4, 5 wt%) with constant wt% of graphite (1 wt%).The fabricated samples of hybrid composites used to find the mechanical properties and microstructure analysis. The test results reveal that the tensile strength and hardness of the composites increased with an increase in the weight percentage of reinforcements, and the percentage of elongation decreases with increasing the reinforcement particles. The boron carbide (B4C) and graphite (Gr)particles in a matrix material are analyzed by a scanning electron microscope (SEM). Energy dispersive X-ray analysis (EDX) is used to evaluate the microstructure and chemical composition of the composites, providing valuable insights for their design and optimization.
- Open Access
- 12 August 2022
- Published by MDPI AG in Mathematics
- Vol. 10 (16) , 2893
Numerical Modelling and Experimental Validation of Novel Para Winglet Tape for Heat Transfer Enhancement
Heat exchangers are predominantly used in the industries of production, manufacturing, power, oil and gas, petroleum, and cooling solutions. The competence of the heat exchanger is optimized through active and passive augmented techniques. The current study revolves around the performance evaluation of Novel Para winglet tape for flow and friction characteristics. Turbulence flow properties from Re of 30,000-to-6000 were explored for three different inclinations and pitches, respectively. Experimental and numerical solutions are derived to showcase the flow behavior over Para winglet tape inserts in the double pipe heat exchanger. Appreciable results were obtained in enhancing the Nusselt number (Nup) for a better heat transfer enforcement through the DEX. All case studies also increased when compared to the smooth pipe. Experimentally, the maximum Nu and Nusselt number ratio was observed to be 398.23 and 5.05 times over the plain tube. Similarly, the maximum friction factor and its ratio were observed to be near 0.33 and 8.89 times over the plain tube. Finally, the maximum POI of 2.68 to 2.37 was achieved with 20° inclinations. The experimental and numerical outcomes of Para winglet tape with the higher inclination and shorter pitch were found to be best out of the others.
- 12 August 2022
- Published by MDPI AG in Mathematics
- Vol. 10 (16) , 2893
Open AccessNumerical Modelling and Experimental Validation of Novel Para Winglet Tape for Heat Transfer Enhancement
Heat exchangers are predominantly used in the industries of production, manufacturing, power, oil and gas, petroleum, and cooling solutions. The competence of the heat exchanger is optimized through active and passive augmented techniques. The current study revolves around the performance evaluation of Novel Para winglet tape for flow and friction characteristics. Turbulence flow properties from Re of 30,000-to-6000 were explored for three different inclinations and pitches, respectively. Experimental and numerical solutions are derived to showcase the flow behavior over Para winglet tape inserts in the double pipe heat exchanger. Appreciable results were obtained in enhancing the Nusselt number (Nup) for a better heat transfer enforcement through the DEX. All case studies also increased when compared to the smooth pipe. Experimentally, the maximum Nu and Nusselt number ratio was observed to be 398.23 and 5.05 times over the plain tube. Similarly, the maximum friction factor and its ratio were observed to be near 0.33 and 8.89 times over the plain tube. Finally, the maximum POI of 2.68 to 2.37 was achieved with 20° inclinations. The experimental and numerical outcomes of Para winglet tape with the higher inclination and shorter pitch were found to be best out of the others.
- 1 October 2020
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 6 (5) , 843-857
NUMERICAL EVALUATION OF THERMO-HYDRAULIC PERFORMANCE INDEX OF A DOUBLE PIPE HEAT EXCHANGER USING DOUBLE SIDED LOUVERED WINGLET TAPE
The decade has witnessed great importance of numerical techniques for scientists and researchers in deciding the correctness, stability, and reliability of new designs. In the present study a numerical technique has been implemented to investigate the thermo-hydraulic performance of the Louvered winglet tape inside the tube section of the double pipe heat exchanger. The Louvered winglet tape has been examined with the slope angle of 50, 100, 150 and 210 to study their thermal characteristics. The Reynolds number 4000-30000 was examined on slope angle of 50, 100, 150 and 210 to study their flow characteristics in the turbulent domain. A smooth pipe was examined to evaluate heat transfer characteristics in terms of Nusselt number and friction coefficient over augmented tube with Louvered winglet tape. The results show a satisfactory performance of Louvered winglet tape over the smooth tube with a similar trend of friction factor, Nusselt number, and thermo-hydraulic performance index (THPI). The percentage of increment of the Nusselt number of the results is found to be 237.04%, 258.4%, 275.11%, and 289.72% when compared to smooth pipe with respect to slope angle of 50, 100, 150 and 210, respectively. The amount of increase in the friction factor in comparison with plain tube is 5.13, 6.73, 8.33, and 11.73 times of that of smooth pipe with respect to slope angle of 50, 100, 150 and 210, respectively. The Louvered winglet tape with slope angle 150 has shown to be promising with respect to higher THPI when considering with other slope angle of 50, 100, and 210. The maximum THPI of 1.85 was obtained for slope angle 150 at Re 12000. Similarly, the THPI values for other slope angle 50, 100, and 210 are 1.71, 1.78 and 1.69. In addition to better performance the Louvered winglet tape can be easily fabricated and adapted for a wide variety of heat transfer industries.
- 1 October 2020
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 6 (5) , 843-857
NUMERICAL EVALUATION OF THERMO-HYDRAULIC PERFORMANCE INDEX OF A DOUBLE PIPE HEAT EXCHANGER USING DOUBLE SIDED LOUVERED WINGLET TAPE
The decade has witnessed great importance of numerical techniques for scientists and researchers in deciding the correctness, stability, and reliability of new designs. In the present study a numerical technique has been implemented to investigate the thermo-hydraulic performance of the Louvered winglet tape inside the tube section of the double pipe heat exchanger. The Louvered winglet tape has been examined with the slope angle of 50, 100, 150 and 210 to study their thermal characteristics. The Reynolds number 4000-30000 was examined on slope angle of 50, 100, 150 and 210 to study their flow characteristics in the turbulent domain. A smooth pipe was examined to evaluate heat transfer characteristics in terms of Nusselt number and friction coefficient over augmented tube with Louvered winglet tape. The results show a satisfactory performance of Louvered winglet tape over the smooth tube with a similar trend of friction factor, Nusselt number, and thermo-hydraulic performance index (THPI). The percentage of increment of the Nusselt number of the results is found to be 237.04%, 258.4%, 275.11%, and 289.72% when compared to smooth pipe with respect to slope angle of 50, 100, 150 and 210, respectively. The amount of increase in the friction factor in comparison with plain tube is 5.13, 6.73, 8.33, and 11.73 times of that of smooth pipe with respect to slope angle of 50, 100, 150 and 210, respectively. The Louvered winglet tape with slope angle 150 has shown to be promising with respect to higher THPI when considering with other slope angle of 50, 100, and 210. The maximum THPI of 1.85 was obtained for slope angle 150 at Re 12000. Similarly, the THPI values for other slope angle 50, 100, and 210 are 1.71, 1.78 and 1.69. In addition to better performance the Louvered winglet tape can be easily fabricated and adapted for a wide variety of heat transfer industries.