MHManjunath S. H.

Manjunath S. H.

*This is an algorithmically generated author record based on publicly available information.

Manjunath S. H. has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • TRIBOLOGICAL STUDIES ON DRY AND WET SLIDING BEHAVIOR of A356.1 ALLOY REINFORCED WITH ZIRCONIUM NANOMETAL MATRIX COMPOSITES

    by G. C. Chethana, S. H. Manjunath, K. B. Girisha

    Aluminum nanometal matrix composites (Al-NMMCs) have emerged as promising materials with enhanced mechanical, thermal, and electrical properties that are used in high-performance applications such as automotive, aerospace, military, and transport compared with conventional aluminum alloys. The incorporation of nanosized reinforcements, such as zirconium oxide nanoparticles, into the aluminum matrix offers significant improvements in strength, stiffness, and wear resistance while maintaining lightweight characteristics. Pongamia oil is a sustainable and environmentally friendly lubricant that has been used in recent advancements to improve the performance of these composites. In this research, an A356.1 aluminum alloy reinforced with zirconium oxide nanoparticles was produced through the stir casting method at a temperature of 650∘C for various weight percentage ratios like 1.0%, 2.0%, 3.0%, and 4.0%. The prepared nanoparticles were characterized by PXRD and SEM. Wear tests were carried out on pin-on-disc apparatus with varying parameters of load, time, and speed for dry sliding wear and wet sliding wear. Results showed that nanometal matrix composites of 4.0% reinforcement of wet sliding wear and coefficient of friction have improved tribological properties.


  • Open Access

    Synergetic efficiency: in situ growth of a novel 2D/2D chemically bonded Bi 2 O 3 /Cs 3 Bi 2 Br 9 S-scheme heterostructure for improved photocatalytic performance and stability

    by Mohamed Masri, Girisha K. B., Abdo Hezam, Khaled Alkanad, Talal F. Qahtan, Qasem A. Drmosh, Kalappa Prashantha, Manjunath S. H., Sanaa Mohammed Abdu Kaid, K. Byrappa, et al.

    An innovative solution to the challenge of catalyst instability in aqueous media via the synthesis of stable 2D Bi 2 O 3 /Cs 3 Bi 2 Br 9 nanosheets.


  • NUMERICAL EVALUATION OF THERMO-HYDRAULIC PERFORMANCE INDEX OF A DOUBLE PIPE HEAT EXCHANGER USING DOUBLE SIDED LOUVERED WINGLET TAPE

    by R Thejaraju, Kb Gi̇rİsHa, Sh Manjunath, Bs Dayananda

    The decade has witnessed great importance of numerical techniques for scientists and researchers in deciding the correctness, stability, and reliability of new designs. In the present study a numerical technique has been implemented to investigate the thermo-hydraulic performance of the Louvered winglet tape inside the tube section of the double pipe heat exchanger. The Louvered winglet tape has been examined with the slope angle of 50, 100, 150 and 210 to study their thermal characteristics. The Reynolds number 4000-30000 was examined on slope angle of 50, 100, 150 and 210 to study their flow characteristics in the turbulent domain. A smooth pipe was examined to evaluate heat transfer characteristics in terms of Nusselt number and friction coefficient over augmented tube with Louvered winglet tape. The results show a satisfactory performance of Louvered winglet tape over the smooth tube with a similar trend of friction factor, Nusselt number, and thermo-hydraulic performance index (THPI). The percentage of increment of the Nusselt number of the results is found to be 237.04%, 258.4%, 275.11%, and 289.72% when compared to smooth pipe with respect to slope angle of 50, 100, 150 and 210, respectively. The amount of increase in the friction factor in comparison with plain tube is 5.13, 6.73, 8.33, and 11.73 times of that of smooth pipe with respect to slope angle of 50, 100, 150 and 210, respectively. The Louvered winglet tape with slope angle 150 has shown to be promising with respect to higher THPI when considering with other slope angle of 50, 100, and 210. The maximum THPI of 1.85 was obtained for slope angle 150 at Re 12000. Similarly, the THPI values for other slope angle 50, 100, and 210 are 1.71, 1.78 and 1.69. In addition to better performance the Louvered winglet tape can be easily fabricated and adapted for a wide variety of heat transfer industries.