Laeyong Jung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Laeyong Jung has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Hyunsang Hwang
Center For Single Atom‐Based Semiconductor Device and the Department of Materials Science and Engineering Pohang University of Science and Technology Pohang Republic of Korea
11 shared publications - Hojung Jang
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
5 shared publications - Geonhui Han
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
4 shared publications - Jongseon Seo
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
4 shared publications - Kyumin Lee
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
4 shared publications - Ohhyuk Kwon
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
3 shared publications
Latest Publications
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Ionic Field-Effect Transistor Achieving Large Memory Window and Enhanced Retention via Ultrathin Ozone-Oxidized Barrier Layer
We propose an ionic field-effect transistor (Ionic FET) based on a WO3-x/HfOx ECRAM stack. The device stores information via ionic-charge-induced threshold voltage (Vth) modulation, thus enabling analog state control with improved scalability over conventional charge-based storage. To relax the fundamental trade-off between ion injection and retention, an ultrathin ion barrier layer is introduced via ozone oxidation, which effectively suppresses ion back-diffusion while preserving sufficient ion injection. As a result, the proposed device achieves a large memory window of ~7.6 V with linear Vth modulation, enabling stable 3-bit multi-level operation with low state variability (σ/μ < 0.1) and robust endurance over 105 program/erase cycles. Furthermore, the ozone-treated barrier layer significantly increases the activation energy for ion back-diffusion, yielding a projected room-temperature retention exceeding 106 sec.
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Ionic Field-Effect Transistor Achieving Large Memory Window and Enhanced Retention via Ultrathin Ozone-Oxidized Barrier Layer
We propose an ionic field-effect transistor (Ionic FET) based on a WO3-x/HfOx ECRAM stack. The device stores information via ionic-charge-induced threshold voltage (Vth) modulation, thus enabling analog state control with improved scalability over conventional charge-based storage. To relax the fundamental trade-off between ion injection and retention, an ultrathin ion barrier layer is introduced via ozone oxidation, which effectively suppresses ion back-diffusion while preserving sufficient ion injection. As a result, the proposed device achieves a large memory window of ~7.6 V with linear Vth modulation, enabling stable 3-bit multi-level operation with low state variability (σ/μ < 0.1) and robust endurance over 105 program/erase cycles. Furthermore, the ozone-treated barrier layer significantly increases the activation energy for ion back-diffusion, yielding a projected room-temperature retention exceeding 106 sec.
- 23 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (12)
Improved Ec control in Hf1−xZrxO2 FeNAND applications using SiO2 nanolaminate structure
The coercive field (Ec) is a key parameter governing the switching behavior of ferroelectric devices, yet its effective modulation remains challenging due to intrinsic material constraints. In this study, we demonstrate a domain-wall-engineering approach to control Ec in Hf1−xZrxO2 (HZO) thin films by inserting 0.5 nm-thick interlayers without altering the overall film thickness. Incorporation of ZrO2 interlayers reduced Ec by 34.7%, enabling low-voltage and energy-efficient operation for ferroelectric random-access memory. Conversely, integrating SiO2 interlayers increased Ec by 62.8%, which is particularly advantageous for ferroelectric NAND (FeNAND) applications requiring a wide memory window. The effectiveness of this strategy was validated using InGaZnO-based ferroelectric field-effect transistors, where the HZO/SiO2 stack achieved enhanced multi-level cell functionality, a substantial threshold-voltage shift, and a gradual switching slope. These results highlight a scalable and CMOS-compatible method to overcome the conventional tradeoffs between operating voltage and memory density, offering a promising route toward high-performance FeNAND and future three-dimensional nonvolatile memory architectures.
- 23 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (12)
Improved Ec control in Hf1−xZrxO2 FeNAND applications using SiO2 nanolaminate structure
The coercive field (Ec) is a key parameter governing the switching behavior of ferroelectric devices, yet its effective modulation remains challenging due to intrinsic material constraints. In this study, we demonstrate a domain-wall-engineering approach to control Ec in Hf1−xZrxO2 (HZO) thin films by inserting 0.5 nm-thick interlayers without altering the overall film thickness. Incorporation of ZrO2 interlayers reduced Ec by 34.7%, enabling low-voltage and energy-efficient operation for ferroelectric random-access memory. Conversely, integrating SiO2 interlayers increased Ec by 62.8%, which is particularly advantageous for ferroelectric NAND (FeNAND) applications requiring a wide memory window. The effectiveness of this strategy was validated using InGaZnO-based ferroelectric field-effect transistors, where the HZO/SiO2 stack achieved enhanced multi-level cell functionality, a substantial threshold-voltage shift, and a gradual switching slope. These results highlight a scalable and CMOS-compatible method to overcome the conventional tradeoffs between operating voltage and memory density, offering a promising route toward high-performance FeNAND and future three-dimensional nonvolatile memory architectures.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (8) , 1349-1352
Hybrid FeFET-ECRAM Device for Enhanced Memory Window and Retention via Ion-Ferroelectric Synergy
We introduce a hybrid ferroelectric field-effect transistor (FeFET) memory device that integrates an ion-based electrochemical random-access memory (ECRAM) stack with a conventional FeFET structure, significantly enhancing both memory window and retention properties. This synergistic improvement arises from ion injections facilitated by the ECRAM layer, allowing analog modulation of the threshold voltage (V${}_{\text {th}}\text {)}$ , while the ferroelectric layer effectively suppresses ion back-diffusion, thus improving retention. Experimental data combined with ionic charge (Q${}_{\text {ion}}\text {)}$ -based modeling confirms that the device achieves a memory window greater than 10 V. By tuning the ion conduction barrier energy (E${}_{\text {a, {ion}}}\text {)}$ of the ECRAM electrolyte to 0.3 eV, uniform ion injections across various programming voltages were achieved, crucial for stable multi-level operation. This optimization resulted in highly linear incremental step pulse programming (ISPP) behavior. Comparative simulations validated the respective contributions of ferroelectric polarization ($\Delta $ P) and ionic charge (Q${}_{\text {ion}}\text {)}$ , demonstrating excellent agreement between modeled and experimental results. Furthermore, failure-time analysis indicated that the ferroelectric layer elevates the energy barrier for ion back-diffusion by 0.29 eV, significantly enhancing retention performance. Consequently, the hybrid device demonstrated reliable 3-bit storage capability, minimal cycle-to-cycle variation, and robust retention characteristics, clearly demonstrating the advantageous synergy between ionic and ferroelectric switching mechanisms for high-density, analog-programmable non-volatile memory applications.- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (8) , 1349-1352
Hybrid FeFET-ECRAM Device for Enhanced Memory Window and Retention via Ion-Ferroelectric Synergy
We introduce a hybrid ferroelectric field-effect transistor (FeFET) memory device that integrates an ion-based electrochemical random-access memory (ECRAM) stack with a conventional FeFET structure, significantly enhancing both memory window and retention properties. This synergistic improvement arises from ion injections facilitated by the ECRAM layer, allowing analog modulation of the threshold voltage (V${}_{\text {th}}\text {)}$ , while the ferroelectric layer effectively suppresses ion back-diffusion, thus improving retention. Experimental data combined with ionic charge (Q${}_{\text {ion}}\text {)}$ -based modeling confirms that the device achieves a memory window greater than 10 V. By tuning the ion conduction barrier energy (E${}_{\text {a, {ion}}}\text {)}$ of the ECRAM electrolyte to 0.3 eV, uniform ion injections across various programming voltages were achieved, crucial for stable multi-level operation. This optimization resulted in highly linear incremental step pulse programming (ISPP) behavior. Comparative simulations validated the respective contributions of ferroelectric polarization ($\Delta $ P) and ionic charge (Q${}_{\text {ion}}\text {)}$ , demonstrating excellent agreement between modeled and experimental results. Furthermore, failure-time analysis indicated that the ferroelectric layer elevates the energy barrier for ion back-diffusion by 0.29 eV, significantly enhancing retention performance. Consequently, the hybrid device demonstrated reliable 3-bit storage capability, minimal cycle-to-cycle variation, and robust retention characteristics, clearly demonstrating the advantageous synergy between ionic and ferroelectric switching mechanisms for high-density, analog-programmable non-volatile memory applications.- 15 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (5) , 2700-2707
Tailoring Ferroelectric Performance and Domain Structure Ordering in HZO Capacitors via 2D-WS2 Multifunctional Layer
In this study, we propose a high-performance and reliable ferroelectric capacitor based on HfxZr1-xO2 (HZO) integrated with an ultrathin multifunctional 2D-WS2 layer. The WS2 layer, positioned at the interface between the bottom electrode and HZO, serves a multiple function. First, the WS2 acts as a protective layer, effectively suppressing the formation of interfacial defects, such as oxygen vacancies and dead layers during the device fabrication process. Second, this layer functions as a seed layer, promoting the growth of vertically aligned HZO domain structures and enhancing the ferroelectric crystallinity of HZO. This approach addresses key limitations in conventional HZO, including interfacial instability, random domain distribution, and inconsistent switching behavior. Our experimental results reveal significant improvements in ferroelectric performance, achieving stable endurance exceeding 1012 cycles while maintaining a high remanent polarization (2Pr > 50 μC/cm2). Additionally, long-term retention performance is expected to exceed ten years at 85 ∘C. Furthermore, the integration of a WS2 interface layer demonstrates excellent device-to-device uniformity and consistency, even in nanoscale HZO device structures. This work provides new insights into the development of high-performance ferroelectric nonvolatile memory technology by highlighting the multiple advantages of the WS2 layer, which enhances interface stability and facilitates vertical domain alignment.
- 15 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (5) , 2700-2707
Tailoring Ferroelectric Performance and Domain Structure Ordering in HZO Capacitors via 2D-WS2 Multifunctional Layer
In this study, we propose a high-performance and reliable ferroelectric capacitor based on HfxZr1-xO2 (HZO) integrated with an ultrathin multifunctional 2D-WS2 layer. The WS2 layer, positioned at the interface between the bottom electrode and HZO, serves a multiple function. First, the WS2 acts as a protective layer, effectively suppressing the formation of interfacial defects, such as oxygen vacancies and dead layers during the device fabrication process. Second, this layer functions as a seed layer, promoting the growth of vertically aligned HZO domain structures and enhancing the ferroelectric crystallinity of HZO. This approach addresses key limitations in conventional HZO, including interfacial instability, random domain distribution, and inconsistent switching behavior. Our experimental results reveal significant improvements in ferroelectric performance, achieving stable endurance exceeding 1012 cycles while maintaining a high remanent polarization (2Pr > 50 μC/cm2). Additionally, long-term retention performance is expected to exceed ten years at 85 ∘C. Furthermore, the integration of a WS2 interface layer demonstrates excellent device-to-device uniformity and consistency, even in nanoscale HZO device structures. This work provides new insights into the development of high-performance ferroelectric nonvolatile memory technology by highlighting the multiple advantages of the WS2 layer, which enhances interface stability and facilitates vertical domain alignment.
- 10 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (5) , 753-756
Enabling Memory Window in Ovonic Threshold Switch Devices Through Cu-Based Trap for Selector-Only Memory Operation
In this study, we propose a method to generate a memory window enabling the ovonic threshold switch (OTS) operate as a selector-only memory(SOM) by doping Cu. Unlike conventional approaches that rely on internal modifications within the device, our method controls trap formation through the supply and migration of Cu via an external Cu electrode. To prevent the excessive supply of cations, which could lead to Cu conducting filament formation, we employed a series resistance and a C diffusion barrier. To demonstrate that the operation mechanism of this device is not based on Cu filamentary switching, we presented the bipolar switching behavior. We also identified a relationship among the memory window, leakage current, and retention, which varies depending on the write current. Furthermore, we analyzed changes in the trap density and activation energy to explain the threshold voltage variation caused by the traps. This work provides a pathway for OTS devices, previously incapable of achieving a memory window, to operate as SOM.
- 10 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (5) , 753-756
Enabling Memory Window in Ovonic Threshold Switch Devices Through Cu-Based Trap for Selector-Only Memory Operation
In this study, we propose a method to generate a memory window enabling the ovonic threshold switch (OTS) operate as a selector-only memory(SOM) by doping Cu. Unlike conventional approaches that rely on internal modifications within the device, our method controls trap formation through the supply and migration of Cu via an external Cu electrode. To prevent the excessive supply of cations, which could lead to Cu conducting filament formation, we employed a series resistance and a C diffusion barrier. To demonstrate that the operation mechanism of this device is not based on Cu filamentary switching, we presented the bipolar switching behavior. We also identified a relationship among the memory window, leakage current, and retention, which varies depending on the write current. Furthermore, we analyzed changes in the trap density and activation energy to explain the threshold voltage variation caused by the traps. This work provides a pathway for OTS devices, previously incapable of achieving a memory window, to operate as SOM.
- 14 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (1) , 44-47
Improved Memory Performance Through Integration of Ferroelectric and Ovonic Threshold Switching Layer
In this study, we explore the combined effects of a ferroelectric (FE) layer with an ovonic threshold switching (OTS) layer to enhance the performance of memory devices. Initially, to enlarge memory window, an FE layer was used to induce bidirectional shifts in the threshold voltage (V th ) of OTS. This polarization-induced modulation led to an additional memory window compared to a case where the applied polarization field was not applied. Subsequently, to enhance the reliability, FE layer’s persistent field was leveraged for mitigating the OTS layer’s effective electric field. This polarization field served as an additional pulse scheme, thereby reducing the relaxation effect of traps and improving drift. Finally, our findings demonstrated FE layer’s capability to facilitate multi-level states via adjustable polarization and a large memory window. We also examined the integration with a selenium-based selector only memory (SOM) device, where we observed a notable enhancement in memory window, exceeding 2 V. These findings suggest the potential for significant improvements in SOM by strategically integrating FE and OTS layers.
- 14 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (1) , 44-47
Improved Memory Performance Through Integration of Ferroelectric and Ovonic Threshold Switching Layer
In this study, we explore the combined effects of a ferroelectric (FE) layer with an ovonic threshold switching (OTS) layer to enhance the performance of memory devices. Initially, to enlarge memory window, an FE layer was used to induce bidirectional shifts in the threshold voltage (V th ) of OTS. This polarization-induced modulation led to an additional memory window compared to a case where the applied polarization field was not applied. Subsequently, to enhance the reliability, FE layer’s persistent field was leveraged for mitigating the OTS layer’s effective electric field. This polarization field served as an additional pulse scheme, thereby reducing the relaxation effect of traps and improving drift. Finally, our findings demonstrated FE layer’s capability to facilitate multi-level states via adjustable polarization and a large memory window. We also examined the integration with a selenium-based selector only memory (SOM) device, where we observed a notable enhancement in memory window, exceeding 2 V. These findings suggest the potential for significant improvements in SOM by strategically integrating FE and OTS layers.
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2383-2386
Enhancing Selector-Only Memory Reliability Through Multi-Step Write Pulse
In this study, we investigated the impact of overshoot current (I over ) on the reliability of selector-only memory (SOM) devices based on an ovonic threshold switch (OTS). We found that implementing a multi-step pulse during the write operation reduced I over by 40%, significantly decreased threshold voltage (V th ) variability during the read process to ensure sufficient read window margin, and improved endurance by more than an order of magnitude, compared to the traditional square pulse. Our analysis revealed that the I over leads to increased I on variability, which in turn causes greater variability in the write pulse’s impact on subsequent read process. Furthermore, I over generates extra injection charge, which directly correlating with increased device stress and significantly impacting endurance. Through intermittent and continuous pulse measurements, we confirmed the critical role of I over in cycling stability. Our findings underscore the importance of suppressing I over to enhance SOM reliability, emphasizing the need for optimizing the multi-step pulse method.
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2383-2386
Enhancing Selector-Only Memory Reliability Through Multi-Step Write Pulse
In this study, we investigated the impact of overshoot current (I over ) on the reliability of selector-only memory (SOM) devices based on an ovonic threshold switch (OTS). We found that implementing a multi-step pulse during the write operation reduced I over by 40%, significantly decreased threshold voltage (V th ) variability during the read process to ensure sufficient read window margin, and improved endurance by more than an order of magnitude, compared to the traditional square pulse. Our analysis revealed that the I over leads to increased I on variability, which in turn causes greater variability in the write pulse’s impact on subsequent read process. Furthermore, I over generates extra injection charge, which directly correlating with increased device stress and significantly impacting endurance. Through intermittent and continuous pulse measurements, we confirmed the critical role of I over in cycling stability. Our findings underscore the importance of suppressing I over to enhance SOM reliability, emphasizing the need for optimizing the multi-step pulse method.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1792-1795
Enhanced Memory Window and Excellent Endurance in FeFET With Ultrathin 2DEG Oxide Channel
We have proposed a high-performance channel material with an ultra-thin interface layer between TiO x and AlO x , which is a two-dimensional electron gas (2DEG)-based ferroelectric field effect transistor (FeFET). The minimal thickness of the 2DEG channel layer ensures it can be fully depleted during the erase operation, enabling a completely erased state and boosting the memory window (MW) close to its theoretical maximum. Modeling-guided optimization of the 2DEG layer increased the MW up to 4 V. Consequently, the 2DEG FeFET achieves a substantial MW of 4.2 V, aligning closely with theoretical predictions. Additionally, the device displays outstanding reliability, such as endurance of 10 9 cycles and retention of 10 years at 85°C.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1792-1795
Enhanced Memory Window and Excellent Endurance in FeFET With Ultrathin 2DEG Oxide Channel
We have proposed a high-performance channel material with an ultra-thin interface layer between TiO x and AlO x , which is a two-dimensional electron gas (2DEG)-based ferroelectric field effect transistor (FeFET). The minimal thickness of the 2DEG channel layer ensures it can be fully depleted during the erase operation, enabling a completely erased state and boosting the memory window (MW) close to its theoretical maximum. Modeling-guided optimization of the 2DEG layer increased the MW up to 4 V. Consequently, the 2DEG FeFET achieves a substantial MW of 4.2 V, aligning closely with theoretical predictions. Additionally, the device displays outstanding reliability, such as endurance of 10 9 cycles and retention of 10 years at 85°C.
- 6 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 2238-2242
Enhanced ON/OFF Ratio (4 × 105) and Robust Endurance (> 1010) in an InGaZnO/HfxZr1-xO2 Ferroelectric Diode via Defect Engineering
In this study, we focused on the electrical and reliability characteristics of a ferroelectric diode (FE diode) composed of an InGaZnO (IGZO)/Hf $_{\text{x}}$ Zr $_{\text{1-\text{x}}}$ O $_{\text{2}}$ (HZO) stack by controlling the bulk and interface defect of IGZO. Initially, to achieve the high ON/OFF ratio, we reduced the bulk defects in the IGZO film during deposition by adjusting the oxygen partial pressure. This strategy effectively reduced the OFF-state leakage current in the high-resistance state (HRS), as demonstrated by current–voltage ( I – $\textit{V}\text{)}$ characteristics and x -ray photoelectron spectroscopy (XPS) analysis. Subsequently, to enhance the endurance characteristics, we considered the application of microwave annealing (MWA) as an alternative to the conventional rapid thermal annealing (RTA) to decrease interface traps. Upon assessing interface trap densities, we confirmed an improved interface quality within double-layered structure. Consequently, the IGZO/HZO FE diode device exhibited a remarkable ON/OFF ratio of 4 $\times$ 10 $^{\text{5}}$ and cycling endurance of 10 $^{\text{10}}$ , underlining the importance of defect management in device performance.
- 6 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 2238-2242
Enhanced ON/OFF Ratio (4 × 105) and Robust Endurance (> 1010) in an InGaZnO/HfxZr1-xO2 Ferroelectric Diode via Defect Engineering
In this study, we focused on the electrical and reliability characteristics of a ferroelectric diode (FE diode) composed of an InGaZnO (IGZO)/Hf $_{\text{x}}$ Zr $_{\text{1-\text{x}}}$ O $_{\text{2}}$ (HZO) stack by controlling the bulk and interface defect of IGZO. Initially, to achieve the high ON/OFF ratio, we reduced the bulk defects in the IGZO film during deposition by adjusting the oxygen partial pressure. This strategy effectively reduced the OFF-state leakage current in the high-resistance state (HRS), as demonstrated by current–voltage ( I – $\textit{V}\text{)}$ characteristics and x -ray photoelectron spectroscopy (XPS) analysis. Subsequently, to enhance the endurance characteristics, we considered the application of microwave annealing (MWA) as an alternative to the conventional rapid thermal annealing (RTA) to decrease interface traps. Upon assessing interface trap densities, we confirmed an improved interface quality within double-layered structure. Consequently, the IGZO/HZO FE diode device exhibited a remarkable ON/OFF ratio of 4 $\times$ 10 $^{\text{5}}$ and cycling endurance of 10 $^{\text{10}}$ , underlining the importance of defect management in device performance.
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (3) , 344-347
Variability and Reliability Study of Nano-Scale Hf0.5Zr0.5O2 Ferroelectric Devices Using O3 Treatment
Hf 0.5 Zr 0.5 O 2 (HZO) faces challenges related to variability and reliability due to the instability of ferroelectric phase crystallization. This instability exacerbates reliability issues in HZO devices, especially as devices scale down to the nanometer level. In this study, we explore a method to tackle these issues in nano-scale ferroelectric HZO devices by directly analyzing switchable polarization. The devices used for the analysis are fabricated through different O3 treatments, and the effects on variability and reliability are demonstrated. We calculate the switchable polarization values from the current responses to Positive Up Negative Down (PUND) voltage pulses. We then compare the device-to-device and cycle-to-cycle uniformity of 500 nm size devices and predict the variability of 100 nm size devices through phase distribution simulation. Additionally, we measure and compare imprint and retention properties using write and read delay tests at 85 °C. Our comprehensive analysis offers insights for fabricating reliable ferroelectric devices with superior uniformity and retention properties.
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (3) , 344-347
Variability and Reliability Study of Nano-Scale Hf0.5Zr0.5O2 Ferroelectric Devices Using O3 Treatment
Hf 0.5 Zr 0.5 O 2 (HZO) faces challenges related to variability and reliability due to the instability of ferroelectric phase crystallization. This instability exacerbates reliability issues in HZO devices, especially as devices scale down to the nanometer level. In this study, we explore a method to tackle these issues in nano-scale ferroelectric HZO devices by directly analyzing switchable polarization. The devices used for the analysis are fabricated through different O3 treatments, and the effects on variability and reliability are demonstrated. We calculate the switchable polarization values from the current responses to Positive Up Negative Down (PUND) voltage pulses. We then compare the device-to-device and cycle-to-cycle uniformity of 500 nm size devices and predict the variability of 100 nm size devices through phase distribution simulation. Additionally, we measure and compare imprint and retention properties using write and read delay tests at 85 °C. Our comprehensive analysis offers insights for fabricating reliable ferroelectric devices with superior uniformity and retention properties.