Ohhyuk Kwon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ohhyuk Kwon has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Hyunsang Hwang
Center For Single Atom‐Based Semiconductor Device and the Department of Materials Science and Engineering Pohang University of Science and Technology Pohang Republic of Korea
12 shared publications - Yoori Seo
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
5 shared publications - Dongmin Kim
Center for Single Atom‐based Semiconductor Device and the Department of Materials Science and Engineering Pohang University of Science and Technology Pohang 37673 Republic of Korea
4 shared publications - Jangseop Lee
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
4 shared publications - Jiho Kim
Pohang University of Science and Technology Department of Materials Science and Engineering, Nam-gu Pohang-si, Gyeongsangbuk-do, Korea, 37673, Pohang, 37673, Korea (the Republic of)
4 shared publications - Laeyong Jung
Department of Material Science and Engineering, Center for Single Atom-based Semiconductor Device, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
3 shared publications
Latest Publications
- 11 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (7) , 1358-1361
Oxygen-Stoichiometry-Controlled Linearity and Uniformity of W/WO x /W Fixed-Resistance Arrays for Edge-AI Inference
We present W/WOx/W fixed-resistance synaptic devices that enable inference-only weight mapping without iterative programming. By establishing an oxygen-stoichiometry-dependent operating window in WOx that provides transport characteristics suitable for inference, near-ohmic read behavior (linearity factor ≤ 1.01) and low device-to-device variation (~ 0.01) are simultaneously achieved. Within this window, conductance is determined by the defined device area, enabling 5-bit weight representation. These characteristics are preserved in a packaged 32 × 32 array, where EMG-based neural inference reaches 85.4% accuracy. This work establishes an inference-suitable material regime for fixed-resistance WOx synapses and provides a practical pathway toward low-variation edge-AI hardware.
- 11 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (7) , 1358-1361
Oxygen-Stoichiometry-Controlled Linearity and Uniformity of W/WO x /W Fixed-Resistance Arrays for Edge-AI Inference
We present W/WOx/W fixed-resistance synaptic devices that enable inference-only weight mapping without iterative programming. By establishing an oxygen-stoichiometry-dependent operating window in WOx that provides transport characteristics suitable for inference, near-ohmic read behavior (linearity factor ≤ 1.01) and low device-to-device variation (~ 0.01) are simultaneously achieved. Within this window, conductance is determined by the defined device area, enabling 5-bit weight representation. These characteristics are preserved in a packaged 32 × 32 array, where EMG-based neural inference reaches 85.4% accuracy. This work establishes an inference-suitable material regime for fixed-resistance WOx synapses and provides a practical pathway toward low-variation edge-AI hardware.
- Open Access
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 3124-3131
DFT-Informed Multiscale Modeling of Switching Mechanisms and Design Strategies for Selector-Only Memory Devices
Chalcogenide-based selector-only memory (SOM) has emerged as a promising candidate for scalable memory expansion in Compute Express Link (CXL)-based and high-density computing systems. However, most prior studies investigate SOM devices at a single scale, either at the atomic or device level, limiting a comprehensive understanding of SOM operation. In this work, we present a density functional theory (DFT)-informed stochastically induced defect percolation (SIDP) framework that explicitly bridges atomic bonding statistics and device-scale switching behavior. The SIDP framework captures how microscopic bonding rearrangements and defect activation collectively evolve into conductive percolation paths, enabling quantitative analysis and prediction of SOM characteristics while naturally reproducing statistical switching variability. The framework is validated using fabricated In–Te-based SOM devices, revealing that Te–Te homopolar bonds govern both memory performance and switching variability, thereby giving rise to an intrinsic tradeoff in SOM performance. Leveraging this insight, we employ the SIDP model to demonstrate the feasibility of two optimization strategies, multilayer structure and device scaling. By combining these two approaches, we demonstrate that memory window (MW) up to 4.34 V and read window margins (RWMs) of 2.83 V are achievable, highlighting the optimization potential enabled by physics-informed design.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 3124-3131
Open AccessDFT-Informed Multiscale Modeling of Switching Mechanisms and Design Strategies for Selector-Only Memory Devices
Chalcogenide-based selector-only memory (SOM) has emerged as a promising candidate for scalable memory expansion in Compute Express Link (CXL)-based and high-density computing systems. However, most prior studies investigate SOM devices at a single scale, either at the atomic or device level, limiting a comprehensive understanding of SOM operation. In this work, we present a density functional theory (DFT)-informed stochastically induced defect percolation (SIDP) framework that explicitly bridges atomic bonding statistics and device-scale switching behavior. The SIDP framework captures how microscopic bonding rearrangements and defect activation collectively evolve into conductive percolation paths, enabling quantitative analysis and prediction of SOM characteristics while naturally reproducing statistical switching variability. The framework is validated using fabricated In–Te-based SOM devices, revealing that Te–Te homopolar bonds govern both memory performance and switching variability, thereby giving rise to an intrinsic tradeoff in SOM performance. Leveraging this insight, we employ the SIDP model to demonstrate the feasibility of two optimization strategies, multilayer structure and device scaling. By combining these two approaches, we demonstrate that memory window (MW) up to 4.34 V and read window margins (RWMs) of 2.83 V are achievable, highlighting the optimization potential enabled by physics-informed design.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (8) , 1349-1352
Hybrid FeFET-ECRAM Device for Enhanced Memory Window and Retention via Ion-Ferroelectric Synergy
We introduce a hybrid ferroelectric field-effect transistor (FeFET) memory device that integrates an ion-based electrochemical random-access memory (ECRAM) stack with a conventional FeFET structure, significantly enhancing both memory window and retention properties. This synergistic improvement arises from ion injections facilitated by the ECRAM layer, allowing analog modulation of the threshold voltage (V${}_{\text {th}}\text {)}$ , while the ferroelectric layer effectively suppresses ion back-diffusion, thus improving retention. Experimental data combined with ionic charge (Q${}_{\text {ion}}\text {)}$ -based modeling confirms that the device achieves a memory window greater than 10 V. By tuning the ion conduction barrier energy (E${}_{\text {a, {ion}}}\text {)}$ of the ECRAM electrolyte to 0.3 eV, uniform ion injections across various programming voltages were achieved, crucial for stable multi-level operation. This optimization resulted in highly linear incremental step pulse programming (ISPP) behavior. Comparative simulations validated the respective contributions of ferroelectric polarization ($\Delta $ P) and ionic charge (Q${}_{\text {ion}}\text {)}$ , demonstrating excellent agreement between modeled and experimental results. Furthermore, failure-time analysis indicated that the ferroelectric layer elevates the energy barrier for ion back-diffusion by 0.29 eV, significantly enhancing retention performance. Consequently, the hybrid device demonstrated reliable 3-bit storage capability, minimal cycle-to-cycle variation, and robust retention characteristics, clearly demonstrating the advantageous synergy between ionic and ferroelectric switching mechanisms for high-density, analog-programmable non-volatile memory applications.- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (8) , 1349-1352
Hybrid FeFET-ECRAM Device for Enhanced Memory Window and Retention via Ion-Ferroelectric Synergy
We introduce a hybrid ferroelectric field-effect transistor (FeFET) memory device that integrates an ion-based electrochemical random-access memory (ECRAM) stack with a conventional FeFET structure, significantly enhancing both memory window and retention properties. This synergistic improvement arises from ion injections facilitated by the ECRAM layer, allowing analog modulation of the threshold voltage (V${}_{\text {th}}\text {)}$ , while the ferroelectric layer effectively suppresses ion back-diffusion, thus improving retention. Experimental data combined with ionic charge (Q${}_{\text {ion}}\text {)}$ -based modeling confirms that the device achieves a memory window greater than 10 V. By tuning the ion conduction barrier energy (E${}_{\text {a, {ion}}}\text {)}$ of the ECRAM electrolyte to 0.3 eV, uniform ion injections across various programming voltages were achieved, crucial for stable multi-level operation. This optimization resulted in highly linear incremental step pulse programming (ISPP) behavior. Comparative simulations validated the respective contributions of ferroelectric polarization ($\Delta $ P) and ionic charge (Q${}_{\text {ion}}\text {)}$ , demonstrating excellent agreement between modeled and experimental results. Furthermore, failure-time analysis indicated that the ferroelectric layer elevates the energy barrier for ion back-diffusion by 0.29 eV, significantly enhancing retention performance. Consequently, the hybrid device demonstrated reliable 3-bit storage capability, minimal cycle-to-cycle variation, and robust retention characteristics, clearly demonstrating the advantageous synergy between ionic and ferroelectric switching mechanisms for high-density, analog-programmable non-volatile memory applications.- 14 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (1) , 44-47
Improved Memory Performance Through Integration of Ferroelectric and Ovonic Threshold Switching Layer
In this study, we explore the combined effects of a ferroelectric (FE) layer with an ovonic threshold switching (OTS) layer to enhance the performance of memory devices. Initially, to enlarge memory window, an FE layer was used to induce bidirectional shifts in the threshold voltage (V th ) of OTS. This polarization-induced modulation led to an additional memory window compared to a case where the applied polarization field was not applied. Subsequently, to enhance the reliability, FE layer’s persistent field was leveraged for mitigating the OTS layer’s effective electric field. This polarization field served as an additional pulse scheme, thereby reducing the relaxation effect of traps and improving drift. Finally, our findings demonstrated FE layer’s capability to facilitate multi-level states via adjustable polarization and a large memory window. We also examined the integration with a selenium-based selector only memory (SOM) device, where we observed a notable enhancement in memory window, exceeding 2 V. These findings suggest the potential for significant improvements in SOM by strategically integrating FE and OTS layers.
- 14 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (1) , 44-47
Improved Memory Performance Through Integration of Ferroelectric and Ovonic Threshold Switching Layer
In this study, we explore the combined effects of a ferroelectric (FE) layer with an ovonic threshold switching (OTS) layer to enhance the performance of memory devices. Initially, to enlarge memory window, an FE layer was used to induce bidirectional shifts in the threshold voltage (V th ) of OTS. This polarization-induced modulation led to an additional memory window compared to a case where the applied polarization field was not applied. Subsequently, to enhance the reliability, FE layer’s persistent field was leveraged for mitigating the OTS layer’s effective electric field. This polarization field served as an additional pulse scheme, thereby reducing the relaxation effect of traps and improving drift. Finally, our findings demonstrated FE layer’s capability to facilitate multi-level states via adjustable polarization and a large memory window. We also examined the integration with a selenium-based selector only memory (SOM) device, where we observed a notable enhancement in memory window, exceeding 2 V. These findings suggest the potential for significant improvements in SOM by strategically integrating FE and OTS layers.
- 28 October 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (18)
Controllable multilevel quantized conduction states in vertical CBRAM using Cu-nanodot ion source
Restricting the injection of cations is crucial for implementing precise quantized conduction (QC) during the multi-level operation of conductive-bridge random-access memory (CBRAM). This study proposes a method that controls ion supply by confining the Cu ion source to 0D in a vertical structure. This confinement enables sophisticated filament control for multilevel operation. Cu nanodots are formed between the W electrodes, with W and Cu serving as the electron and ion sources for the conducting filament, respectively. When the Cu filament is confined to 0D, the controllability of the QC implementation is better than that in cases where the filament is restricted to 1D or bulk Cu. The highest number of quantized levels was observed for 0D Cu, which can be attributed to the synergistic effects of filament confinement and the decrease in the Cu electrochemical reaction rate. Furthermore, we analyzed the switching mechanism of the Cu nanodots by employing the activation energy extracted by the slope of the voltage-time dilemma. Our results demonstrate the effectiveness of confining the ion source to 0D for achieving precise filament control in CBRAM and enabling its applicability to vertical structures.
- 28 October 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (18)
Controllable multilevel quantized conduction states in vertical CBRAM using Cu-nanodot ion source
Restricting the injection of cations is crucial for implementing precise quantized conduction (QC) during the multi-level operation of conductive-bridge random-access memory (CBRAM). This study proposes a method that controls ion supply by confining the Cu ion source to 0D in a vertical structure. This confinement enables sophisticated filament control for multilevel operation. Cu nanodots are formed between the W electrodes, with W and Cu serving as the electron and ion sources for the conducting filament, respectively. When the Cu filament is confined to 0D, the controllability of the QC implementation is better than that in cases where the filament is restricted to 1D or bulk Cu. The highest number of quantized levels was observed for 0D Cu, which can be attributed to the synergistic effects of filament confinement and the decrease in the Cu electrochemical reaction rate. Furthermore, we analyzed the switching mechanism of the Cu nanodots by employing the activation energy extracted by the slope of the voltage-time dilemma. Our results demonstrate the effectiveness of confining the ion source to 0D for achieving precise filament control in CBRAM and enabling its applicability to vertical structures.
- Open Access
- 18 September 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (7)
Vertical‐Switching Conductive Bridge Random Access Memory with Adjustable Tunnel Gap and Improved Switching Uniformity Using 2D Electron Gas
Owing to the high reactivity and diffusivity of Ag and Cu ions, controlling the atomic filament formation and rupture processes in conductive bridge random‐access memory (CBRAM) is challenging. In this study, it is demonstrated that by using a 2D electron gas (2DEG) as the bottom electrode (BE) in a vertical‐switching CBRAM (V‐CBRAM), filament formation and rupture can be effectively managed and the tunnel gap distance created by partial filament formation can be adjusted. The 2DEG BE induces partial filament formation by limiting the number of electrons required for this process in the V‐CBRAM device, as verified via current fitting to the quantum point contact model. Varying the electron concentration and activation energy for electrons trapped in the 2DEG, when paired with various programming voltages, leads to transitions in the device resistance state via changes in the distance of the tunnel gap. This tunnel‐gap‐tunable 2DEG V‐CBRAM device, which exhibits superior switching uniformity, can be employed for nonvolatile memory applications in the sub‐G0 conductance regime, such as 3‐bit multilevel cells and selector‐less memory.
- 18 September 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (7)
Open AccessVertical‐Switching Conductive Bridge Random Access Memory with Adjustable Tunnel Gap and Improved Switching Uniformity Using 2D Electron Gas
Owing to the high reactivity and diffusivity of Ag and Cu ions, controlling the atomic filament formation and rupture processes in conductive bridge random‐access memory (CBRAM) is challenging. In this study, it is demonstrated that by using a 2D electron gas (2DEG) as the bottom electrode (BE) in a vertical‐switching CBRAM (V‐CBRAM), filament formation and rupture can be effectively managed and the tunnel gap distance created by partial filament formation can be adjusted. The 2DEG BE induces partial filament formation by limiting the number of electrons required for this process in the V‐CBRAM device, as verified via current fitting to the quantum point contact model. Varying the electron concentration and activation energy for electrons trapped in the 2DEG, when paired with various programming voltages, leads to transitions in the device resistance state via changes in the distance of the tunnel gap. This tunnel‐gap‐tunable 2DEG V‐CBRAM device, which exhibits superior switching uniformity, can be employed for nonvolatile memory applications in the sub‐G0 conductance regime, such as 3‐bit multilevel cells and selector‐less memory.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1792-1795
Enhanced Memory Window and Excellent Endurance in FeFET With Ultrathin 2DEG Oxide Channel
We have proposed a high-performance channel material with an ultra-thin interface layer between TiO x and AlO x , which is a two-dimensional electron gas (2DEG)-based ferroelectric field effect transistor (FeFET). The minimal thickness of the 2DEG channel layer ensures it can be fully depleted during the erase operation, enabling a completely erased state and boosting the memory window (MW) close to its theoretical maximum. Modeling-guided optimization of the 2DEG layer increased the MW up to 4 V. Consequently, the 2DEG FeFET achieves a substantial MW of 4.2 V, aligning closely with theoretical predictions. Additionally, the device displays outstanding reliability, such as endurance of 10 9 cycles and retention of 10 years at 85°C.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1792-1795
Enhanced Memory Window and Excellent Endurance in FeFET With Ultrathin 2DEG Oxide Channel
We have proposed a high-performance channel material with an ultra-thin interface layer between TiO x and AlO x , which is a two-dimensional electron gas (2DEG)-based ferroelectric field effect transistor (FeFET). The minimal thickness of the 2DEG channel layer ensures it can be fully depleted during the erase operation, enabling a completely erased state and boosting the memory window (MW) close to its theoretical maximum. Modeling-guided optimization of the 2DEG layer increased the MW up to 4 V. Consequently, the 2DEG FeFET achieves a substantial MW of 4.2 V, aligning closely with theoretical predictions. Additionally, the device displays outstanding reliability, such as endurance of 10 9 cycles and retention of 10 years at 85°C.
- Open Access
- 23 May 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (2)
Volatile threshold switching devices for hardware security primitives: Exploiting intrinsic variability as an entropy source
In the age of the Internet of Things, the proliferation of edge devices has resulted in a significant increase in personal information that is susceptible to theft and counterfeiting at various stages of data communication. As a result, substantial attention has been focused on hardware (HW) security elements, such as the true random number generator and physical unclonable function. With the recent surge in research and development of emerging memristors, which exploit the inherent variability of these devices, there has been a notable increase in studies on HW security. Particularly, volatile threshold switch (TS) devices, which exhibit insulator/metal characteristics below/above a certain threshold voltage, show great promise as security devices due to their lower power consumption and higher cycling endurance compared to nonvolatile memory devices. Despite the promising attributes and increasing demand for TS devices for HW security, there remains a lack of a comprehensive overview covering various TS devices and their potential contributions to HW privacy. To address this gap, this review provides an encompassing analysis of different types of TS devices and their performance in HW security literature, providing insight into current limitations and the future prospects of HW security primitives based on TS devices.
- 23 May 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (2)
Open AccessVolatile threshold switching devices for hardware security primitives: Exploiting intrinsic variability as an entropy source
In the age of the Internet of Things, the proliferation of edge devices has resulted in a significant increase in personal information that is susceptible to theft and counterfeiting at various stages of data communication. As a result, substantial attention has been focused on hardware (HW) security elements, such as the true random number generator and physical unclonable function. With the recent surge in research and development of emerging memristors, which exploit the inherent variability of these devices, there has been a notable increase in studies on HW security. Particularly, volatile threshold switch (TS) devices, which exhibit insulator/metal characteristics below/above a certain threshold voltage, show great promise as security devices due to their lower power consumption and higher cycling endurance compared to nonvolatile memory devices. Despite the promising attributes and increasing demand for TS devices for HW security, there remains a lack of a comprehensive overview covering various TS devices and their potential contributions to HW privacy. To address this gap, this review provides an encompassing analysis of different types of TS devices and their performance in HW security literature, providing insight into current limitations and the future prospects of HW security primitives based on TS devices.
- Open Access
- 27 December 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (10) , 105203
Enhancement of NbO2-based oscillator neuron device performance via cryogenic operation
The Niobium Dioxide (NbO2) oscillator neuron has garnered significant interest because of its simple structure compared to conventional CMOS-based circuits. However, the limited on/off resistance ratio narrows the range of series resistances that satisfy the self-oscillation conditions and limits its use in large-scale synaptic arrays. In this study, we report the possibility of improving the performance of NbO2-based oscillator neuron devices through cryogenic operation. The study emphasizes two crucial parameters: the on/off resistance ratio and the oscillation amplitude, both of which are essential for accurate weighted sum classification. The data suggest that these parameters can be effectively enhanced under cryogenic conditions. In addition, we revealed that 120 K is the optimal temperature for cryogenic operation, as it represents the temperature where the on/off resistance ratio ceases to increase. As a result, we revealed that the series resistance range satisfying the self-oscillation condition in a single oscillator increases from 20 to 126 kΩ. The research also probes the maximum possible array size at each temperature. At 300 K, representation is only possible for a 5 × 5 array, but at 120 K, a 30 × 30 array can be represented as a frequency. The evidence implies that the 120 K conditions not only broaden the range of series resistors that can be connected to a single oscillator but also increases the array size, thereby representing different weighted sum currents as frequencies. The research indicates that using carefully optimized cryogenic operation could be a viable method to enhance the necessary NbO2 properties for an oscillator neuron device.
- 27 December 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (10) , 105203
Open AccessEnhancement of NbO2-based oscillator neuron device performance via cryogenic operation
The Niobium Dioxide (NbO2) oscillator neuron has garnered significant interest because of its simple structure compared to conventional CMOS-based circuits. However, the limited on/off resistance ratio narrows the range of series resistances that satisfy the self-oscillation conditions and limits its use in large-scale synaptic arrays. In this study, we report the possibility of improving the performance of NbO2-based oscillator neuron devices through cryogenic operation. The study emphasizes two crucial parameters: the on/off resistance ratio and the oscillation amplitude, both of which are essential for accurate weighted sum classification. The data suggest that these parameters can be effectively enhanced under cryogenic conditions. In addition, we revealed that 120 K is the optimal temperature for cryogenic operation, as it represents the temperature where the on/off resistance ratio ceases to increase. As a result, we revealed that the series resistance range satisfying the self-oscillation condition in a single oscillator increases from 20 to 126 kΩ. The research also probes the maximum possible array size at each temperature. At 300 K, representation is only possible for a 5 × 5 array, but at 120 K, a 30 × 30 array can be represented as a frequency. The evidence implies that the 120 K conditions not only broaden the range of series resistors that can be connected to a single oscillator but also increases the array size, thereby representing different weighted sum currents as frequencies. The research indicates that using carefully optimized cryogenic operation could be a viable method to enhance the necessary NbO2 properties for an oscillator neuron device.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (1) , 128-131
Subthreshold Bias-Induced Threshold Voltage Shift of the Ovonic Threshold Switch
In this study, we report on the subthreshold bias-induced threshold voltage shift (SITS) phenomenon of an ovonic threshold switch (OTS) that can occur during array inhibit operation in a cross-point memory. We found that the threshold voltage (V th ) of the OTS increases after applying a bias to the subthreshold region of the OTS. In particular, the closer the subthreshold bias is to the V th of the OTS, and the longer the width of the bias pulse, the greater the SITS effect. As this SITS phenomenon can occur at half-biased cells during the inhibit operations of read and write, it should be considered as a factor affecting V th instability. Based on the changes in drift characteristics after subthreshold biasing and the analysis of off-leakage fitting parameters, it can be concluded that the SITS phenomenon is likely to be associated with the acceleration of the defect annihilation in the OTS film.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (1) , 128-131
Subthreshold Bias-Induced Threshold Voltage Shift of the Ovonic Threshold Switch
In this study, we report on the subthreshold bias-induced threshold voltage shift (SITS) phenomenon of an ovonic threshold switch (OTS) that can occur during array inhibit operation in a cross-point memory. We found that the threshold voltage (V th ) of the OTS increases after applying a bias to the subthreshold region of the OTS. In particular, the closer the subthreshold bias is to the V th of the OTS, and the longer the width of the bias pulse, the greater the SITS effect. As this SITS phenomenon can occur at half-biased cells during the inhibit operations of read and write, it should be considered as a factor affecting V th instability. Based on the changes in drift characteristics after subthreshold biasing and the analysis of off-leakage fitting parameters, it can be concluded that the SITS phenomenon is likely to be associated with the acceleration of the defect annihilation in the OTS film.