Xichen Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xichen Liu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Shuai Wu
School of New Energy, Harbin Institute of Technology, Weihai, China
9 shared publications - Chunwei Cai
School of New Energy, Harbin Institute of Technology, Weihai, China
8 shared publications - Chenghao Li
College of New Energy, Harbin Institute of Technology, Weihai, China
4 shared publications - Jinpeng Yu
Qingdao University
3 shared publications - Wenping Chai
School of New Energy, Harbin Institute of Technology, Weihai, China
3 shared publications Xiuyun Ren
College of New Energy, Harbin Institute of Technology-Weihai, Weihai, China
3 shared publications
Latest Publications
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 16591-16604
Failure Mechanisms of Four-Plate Seawater Capacitive Power Transfer: A Poynting Vector Perspective
Existing research indicates that conventional four-plate Capacitive Power Transfer (CPT) system can hardly realize power transmission when the plates are fully submerged in seawater. However, the root cause of this failure in power transmission has not been investigated currently, still relying on simulation and experimental results, leading puzzles for scholars. Therefore, this article attempts to elucidate the failure mechanisms from the perspective of electromagnetics (EM) theory. It reveals that the high conductivity of seawater leads to significant attenuation and a dominant real part in CPT near-field complex Poynting vector, preventing effective reactive power coupling crucial for CPT. Then, an equivalent circuit model of seawater CPT is developed based on Poynting's theorem, establishing a fundamental connection between EM phenomena and lumped circuit models. Finally, the significant influence of conductivity on CPT is proved by simulation in COMSOL and experiments in lab and actual ocean, validating the feasibility of the theoretical analysis.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 16591-16604
Failure Mechanisms of Four-Plate Seawater Capacitive Power Transfer: A Poynting Vector Perspective
Existing research indicates that conventional four-plate Capacitive Power Transfer (CPT) system can hardly realize power transmission when the plates are fully submerged in seawater. However, the root cause of this failure in power transmission has not been investigated currently, still relying on simulation and experimental results, leading puzzles for scholars. Therefore, this article attempts to elucidate the failure mechanisms from the perspective of electromagnetics (EM) theory. It reveals that the high conductivity of seawater leads to significant attenuation and a dominant real part in CPT near-field complex Poynting vector, preventing effective reactive power coupling crucial for CPT. Then, an equivalent circuit model of seawater CPT is developed based on Poynting's theorem, establishing a fundamental connection between EM phenomena and lumped circuit models. Finally, the significant influence of conductivity on CPT is proved by simulation in COMSOL and experiments in lab and actual ocean, validating the feasibility of the theoretical analysis.
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-11
An IPT-CPT Hybrid Wireless Power Transfer System for Uncrewed Aerial Vehicles
In the field of uncrewed aerial vehicle (UAV) wireless charging, inductive power transfer (IPT) and capacitive power transfer (CPT) have become the two main technical approaches. However, existing single-topology systems still face significant challenges. This article proposes a hybrid IPT-CPT wireless power transfer (WPT) system to address key limitations of lightweight design and landing misalignment tolerance. First, a hybrid coupler is designed, with CPT serving as the main energy transfer channel. By reusing the compensation inductor as the coupler of IPT, the integration level of the system is improved. Then, a frequency-variable reconfiguration strategy with single-switch control is introduced to enable constant current (CC) and constant voltage (CV) output modes. Furthermore, a modified MOEA/D algorithm is employed to co-optimize electromagnetic parameters, balancing transmission efficiency and output power. Experimental results demonstrate that the system delivers 218.8 W with 86.38% efficiency in CC mode at 750 kHz and 216.6 W with 81.39% efficiency in CV mode at 778 kHz. The system exhibits strong misalignment tolerance, maintaining stable operation within $\boldsymbol{\pm}$25~mm (x-axis) and $\boldsymbol{\pm}$100 mm ($y$-axis) offset ranges.
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-11
An IPT-CPT Hybrid Wireless Power Transfer System for Uncrewed Aerial Vehicles
In the field of uncrewed aerial vehicle (UAV) wireless charging, inductive power transfer (IPT) and capacitive power transfer (CPT) have become the two main technical approaches. However, existing single-topology systems still face significant challenges. This article proposes a hybrid IPT-CPT wireless power transfer (WPT) system to address key limitations of lightweight design and landing misalignment tolerance. First, a hybrid coupler is designed, with CPT serving as the main energy transfer channel. By reusing the compensation inductor as the coupler of IPT, the integration level of the system is improved. Then, a frequency-variable reconfiguration strategy with single-switch control is introduced to enable constant current (CC) and constant voltage (CV) output modes. Furthermore, a modified MOEA/D algorithm is employed to co-optimize electromagnetic parameters, balancing transmission efficiency and output power. Experimental results demonstrate that the system delivers 218.8 W with 86.38% efficiency in CC mode at 750 kHz and 216.6 W with 81.39% efficiency in CV mode at 778 kHz. The system exhibits strong misalignment tolerance, maintaining stable operation within $\boldsymbol{\pm}$25~mm (x-axis) and $\boldsymbol{\pm}$100 mm ($y$-axis) offset ranges.
- 21 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (6) , 7603-7614
Modeling and Implementation of a Long-Distance Seawater Single-Wire CPT System for Underwater Sensor
A long-distance, strong-misalignment tolerance seawater capacitive power transfer system with two insulated electric-field couplers and single-wire for underwater sensors is proposed in this article, and it has the advantages of low cost, low weight and hard worn-out compared with traditional structure. First, quasi electric double layer theory for coupler in seawater is proposed, and seawater between two couplers can be considered as equipotential medium is demonstrated in detail. Second, model of seawater electric-field coupled channel is built. The feasibility of long distance and strong misalignment tolerance is proved. Then, double T-LCL compensation network is investigated and selected for constant output voltage, zero phase angle (ZPA), and antifrequency-offset. Experimental results in lab show that the system can deliver 732.1 W at a dc–dc efficiency of 89.2%. In actual ocean, the experimental transmission distance is 10 m, achieving 206.8 W power transmission and 83% efficiency, which verifies the proposed program is adapted to power supply of sensors in complex ocean environment and the advantages of long distance. This article is also accompanied by a video file demonstrating experiment in actual ocean.
- 21 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (6) , 7603-7614
Modeling and Implementation of a Long-Distance Seawater Single-Wire CPT System for Underwater Sensor
A long-distance, strong-misalignment tolerance seawater capacitive power transfer system with two insulated electric-field couplers and single-wire for underwater sensors is proposed in this article, and it has the advantages of low cost, low weight and hard worn-out compared with traditional structure. First, quasi electric double layer theory for coupler in seawater is proposed, and seawater between two couplers can be considered as equipotential medium is demonstrated in detail. Second, model of seawater electric-field coupled channel is built. The feasibility of long distance and strong misalignment tolerance is proved. Then, double T-LCL compensation network is investigated and selected for constant output voltage, zero phase angle (ZPA), and antifrequency-offset. Experimental results in lab show that the system can deliver 732.1 W at a dc–dc efficiency of 89.2%. In actual ocean, the experimental transmission distance is 10 m, achieving 206.8 W power transmission and 83% efficiency, which verifies the proposed program is adapted to power supply of sensors in complex ocean environment and the advantages of long distance. This article is also accompanied by a video file demonstrating experiment in actual ocean.
- 13 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (3) , 4640-4651
Modeling and Analysis of Undersea Capacitive Power Transfer Based on Conduction Current in Seawater
The liquid environment and high conductivity of the seawater, which changes the characteristic of capacitive coupler compared to the air condition, are the difficulties to adoption of capacitive power transfer (CPT) technology for marine device. In this paper, a universal circuit model of the bipolar plate fully immersed into water environment is proposed and divided into three cases based on the conductivity, validating the conduction path dominates the capacitive coupling in seawater. Then, the theoretical model of undersea four-plates coupler immersed into seawater, which consists of four coupling capacitances between metal plate and seawater and six seawater resistances, is derived, analyzed and simulated. It well explains the reason of stable parameters of the coupler and power mainly flowing in receiving side since coupling object is seawater rather than plate. Later, a seawater capacitive power transfer (SCPT) system with Y-type capacitor and single wire is proposed for realizing efficient power transmission. Finally, a laboratory prototype is established and achieves stable 171W and 85% DC-DC efficiency with lower than 1% variation under random misalignment.
- 13 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (3) , 4640-4651
Modeling and Analysis of Undersea Capacitive Power Transfer Based on Conduction Current in Seawater
The liquid environment and high conductivity of the seawater, which changes the characteristic of capacitive coupler compared to the air condition, are the difficulties to adoption of capacitive power transfer (CPT) technology for marine device. In this paper, a universal circuit model of the bipolar plate fully immersed into water environment is proposed and divided into three cases based on the conductivity, validating the conduction path dominates the capacitive coupling in seawater. Then, the theoretical model of undersea four-plates coupler immersed into seawater, which consists of four coupling capacitances between metal plate and seawater and six seawater resistances, is derived, analyzed and simulated. It well explains the reason of stable parameters of the coupler and power mainly flowing in receiving side since coupling object is seawater rather than plate. Later, a seawater capacitive power transfer (SCPT) system with Y-type capacitor and single wire is proposed for realizing efficient power transmission. Finally, a laboratory prototype is established and achieves stable 171W and 85% DC-DC efficiency with lower than 1% variation under random misalignment.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (2) , 3726-3737
Modeling and Design of a Transcutaneous Resonant Capacitive Power Transfer Link for Biomedical Implants
This article proposes a transcutaneous resonant capacitive power transfer link for biomedical implants using parallel thin-film electrodes as coupling plates. First, the practical multilayer tissue circuit model is obtained by tissue dielectric properties and current path. Analysis is presented to identify the influencing factors of loss mechanisms on power transfer efficiency (PTE) and power delivered to the load (PDL). Then, an asymmetric insulation layer coupler is proposed to reduce losses. The parameters of this design are obtained from the finite-element method for maximum PTE and high PDL. Moreover, the safety assessment and power transfer strategies are performed according to the IEEE C95.1 guideline; 90.73 mW of PDL is safely received at 47.02% PTE. Finally, two sets of comparative experiments are conducted at 6.78-MHz operating frequency using pork as the medium, evaluating the performance of symmetric insulation layer (t2 = 0.015 mm) and asymmetric insulation layer coupler (t2 = 0.15 mm). The experimental results show good agreement with the analytical and simulation results; the asymmetric insulation layer compared with the symmetry insulation layer improves efficiency by 8.9%.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (2) , 3726-3737
Modeling and Design of a Transcutaneous Resonant Capacitive Power Transfer Link for Biomedical Implants
This article proposes a transcutaneous resonant capacitive power transfer link for biomedical implants using parallel thin-film electrodes as coupling plates. First, the practical multilayer tissue circuit model is obtained by tissue dielectric properties and current path. Analysis is presented to identify the influencing factors of loss mechanisms on power transfer efficiency (PTE) and power delivered to the load (PDL). Then, an asymmetric insulation layer coupler is proposed to reduce losses. The parameters of this design are obtained from the finite-element method for maximum PTE and high PDL. Moreover, the safety assessment and power transfer strategies are performed according to the IEEE C95.1 guideline; 90.73 mW of PDL is safely received at 47.02% PTE. Finally, two sets of comparative experiments are conducted at 6.78-MHz operating frequency using pork as the medium, evaluating the performance of symmetric insulation layer (t2 = 0.015 mm) and asymmetric insulation layer coupler (t2 = 0.15 mm). The experimental results show good agreement with the analytical and simulation results; the asymmetric insulation layer compared with the symmetry insulation layer improves efficiency by 8.9%.
- 11 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (11) , 14129-14134
A Strong Misalignment-Tolerance Wireless Power Transfer System Based on Dynamic Diffusion Magnetic Field for Unmanned Aerial Vehicle Applications
The peculiar structure, restricted payload ability, and inevitable landing position deviation of the unmanned aerial vehicles (UAVs) have become the bottleneck, restricting their wireless power transfer (WPT) applications. To overcome these problems, a dynamic diffusion magnetic field, based on the two-phase transmitting circular coils arranged at intervals, is established by the design of the magnetic structure and excitation current phase. At this time, the receiver can be simplified as a rectangular coil and small magnetic core, which only picks up the horizontal magnetic flux to achieve a compact design. Then, the transmitter self-coupling is analyzed and a decoupling transformer is built for the circulation active power feedback. Finally, a UAV WPT prototype is constructed, and the experimental result indicates that it can transfer 286.7 W with a dc–dc efficiency of 80.3%, and maximum fluctuation of output dc current and dc–dc efficiency are only 0.48 A and 2.1% under the UAV dislocation.
- 11 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (11) , 14129-14134
A Strong Misalignment-Tolerance Wireless Power Transfer System Based on Dynamic Diffusion Magnetic Field for Unmanned Aerial Vehicle Applications
The peculiar structure, restricted payload ability, and inevitable landing position deviation of the unmanned aerial vehicles (UAVs) have become the bottleneck, restricting their wireless power transfer (WPT) applications. To overcome these problems, a dynamic diffusion magnetic field, based on the two-phase transmitting circular coils arranged at intervals, is established by the design of the magnetic structure and excitation current phase. At this time, the receiver can be simplified as a rectangular coil and small magnetic core, which only picks up the horizontal magnetic flux to achieve a compact design. Then, the transmitter self-coupling is analyzed and a decoupling transformer is built for the circulation active power feedback. Finally, a UAV WPT prototype is constructed, and the experimental result indicates that it can transfer 286.7 W with a dc–dc efficiency of 80.3%, and maximum fluctuation of output dc current and dc–dc efficiency are only 0.48 A and 2.1% under the UAV dislocation.
- 8 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (4) , 8566-8574
A High Misalignment Tolerance IPT System for Unmanned Aerial Vehicles Based on Multiwinding Combined Coupling
Anti-misalignment and light-weight design are two important issues faced by unmanned aerial vehicle (UAV) wireless charging systems. In order to meet these two requirements, a matts-shaped transmitter which can generate a rotating magnetic field is proposed to improve the angular misalignment capability and a multi-winding combined receiver, which weighs only 105 g, is presented to improve the lateral and longitudinal misalignment tolerance, respectively. Furthermore, a multi-pickup channel superposition circuit is designed and modelized. Finally, an experimental prototype is built to verify the proposal. The system delivers an output power of 300.6 W with a DC-DC efficiency of 88.9%. Besides, it especially achieves stable output in the range of angular misalignment of [0°, 360°] and axial misalignment of [-50 mm, 50 mm].
- 8 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (4) , 8566-8574
A High Misalignment Tolerance IPT System for Unmanned Aerial Vehicles Based on Multiwinding Combined Coupling
Anti-misalignment and light-weight design are two important issues faced by unmanned aerial vehicle (UAV) wireless charging systems. In order to meet these two requirements, a matts-shaped transmitter which can generate a rotating magnetic field is proposed to improve the angular misalignment capability and a multi-winding combined receiver, which weighs only 105 g, is presented to improve the lateral and longitudinal misalignment tolerance, respectively. Furthermore, a multi-pickup channel superposition circuit is designed and modelized. Finally, an experimental prototype is built to verify the proposal. The system delivers an output power of 300.6 W with a DC-DC efficiency of 88.9%. Besides, it especially achieves stable output in the range of angular misalignment of [0°, 360°] and axial misalignment of [-50 mm, 50 mm].
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (4) , 8746-8757
A Free-Positioning IPT System via Reconfigurable Coil Array Transmitter for Unmanned Aerial Vehicle Applications
The special structure, limited payload and large range misalignments are three major impediments to adoption of inductive power transfer (IPT) technology for unmanned aerial vehicle (UAV) unattended recharging applications. This paper proposes a free-positioning IPT system to achieve reliable power transfer within large-scale horizontal offset and arbitrary two-dimensional (2D)-rotation. Specifically, the novel magnetic structure employs a coil array transmitter and two perpendicular air-cored receiving coils. The transmitter generates a uniform rotating magnetic field with the cooperation of coil structure and its optimized excitation current vector, and the receivers based on cross-coupling mode utilize horizontal flux to establish strong coupling, by which the receivers are characterized by simple structure and light weight. Moreover, a reconfigurable circuit topology that allows the array coils to be flexibly enabled according to the landing position of the UAV is designed and modeled. Finally, an experimental prototype is established to validate the proposal. The system can deliver 438 W with a DC-DC efficiency of 89%, and especially the variation of the output voltage is within ±8.7% during various landing positions and directions, which lays the foundation for UAV available free wireless charging in a wide range 2D space.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (4) , 8746-8757
A Free-Positioning IPT System via Reconfigurable Coil Array Transmitter for Unmanned Aerial Vehicle Applications
The special structure, limited payload and large range misalignments are three major impediments to adoption of inductive power transfer (IPT) technology for unmanned aerial vehicle (UAV) unattended recharging applications. This paper proposes a free-positioning IPT system to achieve reliable power transfer within large-scale horizontal offset and arbitrary two-dimensional (2D)-rotation. Specifically, the novel magnetic structure employs a coil array transmitter and two perpendicular air-cored receiving coils. The transmitter generates a uniform rotating magnetic field with the cooperation of coil structure and its optimized excitation current vector, and the receivers based on cross-coupling mode utilize horizontal flux to establish strong coupling, by which the receivers are characterized by simple structure and light weight. Moreover, a reconfigurable circuit topology that allows the array coils to be flexibly enabled according to the landing position of the UAV is designed and modeled. Finally, an experimental prototype is established to validate the proposal. The system can deliver 438 W with a DC-DC efficiency of 89%, and especially the variation of the output voltage is within ±8.7% during various landing positions and directions, which lays the foundation for UAV available free wireless charging in a wide range 2D space.
- 15 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (1) , 22-26
A Misalignment Tolerance and Lightweight Wireless Charging System via Reconfigurable Capacitive Coupling for Unmanned Aerial Vehicle Applications
This letter proposes a novel capacitive power transfer system for the unmanned aerial vehicles (UAVs) with lightweight in receivers and robust misalignment tolerance characteristics. The design and analysis of a reconfigurable capacitive coupler are presented at first. The transmitter adopts four rectangular copper plates, which can be reconfigured according to the landing positions and directions. The receiver includes two hollow cylindrical copper-foil sleeves wrapped at the bottom of UAV landing gears, thereby leading to the adaption of the UAV's structure and the tolerance to lateral-, longitudinal-, and angular misalignment. Then, simulation and prototype experiments are carried out to verify the proposal. The results show that the prototype has low leakage electric flux at the UAV fuselage and can deliver 212.1 W with a dc-to-dc efficiency of 82.5%. Especially the proposal allows UAV to be powered within ±0.76 A of output current variation for different landing positions and directions, and the system dc-to-dc efficiency variation is within ±1%.
- 15 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (1) , 22-26
A Misalignment Tolerance and Lightweight Wireless Charging System via Reconfigurable Capacitive Coupling for Unmanned Aerial Vehicle Applications
This letter proposes a novel capacitive power transfer system for the unmanned aerial vehicles (UAVs) with lightweight in receivers and robust misalignment tolerance characteristics. The design and analysis of a reconfigurable capacitive coupler are presented at first. The transmitter adopts four rectangular copper plates, which can be reconfigured according to the landing positions and directions. The receiver includes two hollow cylindrical copper-foil sleeves wrapped at the bottom of UAV landing gears, thereby leading to the adaption of the UAV's structure and the tolerance to lateral-, longitudinal-, and angular misalignment. Then, simulation and prototype experiments are carried out to verify the proposal. The results show that the prototype has low leakage electric flux at the UAV fuselage and can deliver 212.1 W with a dc-to-dc efficiency of 82.5%. Especially the proposal allows UAV to be powered within ±0.76 A of output current variation for different landing positions and directions, and the system dc-to-dc efficiency variation is within ±1%.