Jinke Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jinke Zhu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Hong Li
State Key Laboratory of Advanced Glass Materials Wuhan University of Technology Wuhan China
2 shared publications - Bing Chen
College of Mechanical and Electrical Engineering, Qingdao University, 308 Ningxia Road, Qingdao 266071, China
1 shared publication - Fubin Ma
State Key Laboratory of Bio-Fibers and Eco-Textiles, Qingdao University, Qingdao 266071, China
1 shared publication - Guidong Li
College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
1 shared publication - Junru Li
College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
1 shared publication - Kewei Chen
College of Mechanical and Electrical Engineering, Qingdao University, 308 Ningxia Road, Qingdao 266071, China
1 shared publication
Latest Publications
- Open Access
Review on the Solar-Driven Photocathodic Protection of Metals in the Marine Environment
Photocathodic protection (PCP) technology has gained wide attention in the field of corrosion due to its green, environmentally friendly, and sustainable characteristics, and has become a protection technology with broad development prospects in the future marine environment. By investigating recent research results, the mainstream photoanode materials are TiO2, BiVO4, g-C3N4, ZnO, In2O3, SrTiO3 and other materials. Among them, TiO2 is an ideal photoanode material for PCP because of its efficient photochemical corrosion resistance, remarkable reaction stability, and excellent photoelectric properties. However, TiO2 itself has more drawbacks, such as limited utilization of visible light and low photogenerated electron-hole separation efficiency. These defects limit the wide application of TiO2 in PCP. Through modification methods, the reaction efficiency can be substantially improved and the availability of TiO2 can be increased. This paper lists the research progress of modifying TiO2 materials using metal and non-metal doping modification, semiconductor compounding technology, and energy storage materials for application in PCP, and introduces several new types of photoanode materials. This paper suggests new ideas for the design of more efficient photoanodes.
Open AccessReview on the Solar-Driven Photocathodic Protection of Metals in the Marine Environment
Photocathodic protection (PCP) technology has gained wide attention in the field of corrosion due to its green, environmentally friendly, and sustainable characteristics, and has become a protection technology with broad development prospects in the future marine environment. By investigating recent research results, the mainstream photoanode materials are TiO2, BiVO4, g-C3N4, ZnO, In2O3, SrTiO3 and other materials. Among them, TiO2 is an ideal photoanode material for PCP because of its efficient photochemical corrosion resistance, remarkable reaction stability, and excellent photoelectric properties. However, TiO2 itself has more drawbacks, such as limited utilization of visible light and low photogenerated electron-hole separation efficiency. These defects limit the wide application of TiO2 in PCP. Through modification methods, the reaction efficiency can be substantially improved and the availability of TiO2 can be increased. This paper lists the research progress of modifying TiO2 materials using metal and non-metal doping modification, semiconductor compounding technology, and energy storage materials for application in PCP, and introduces several new types of photoanode materials. This paper suggests new ideas for the design of more efficient photoanodes.
- Open Access
Highly Efficient CuInSe2 Sensitized TiO2 Nanotube Films for Photocathodic Protection of 316 Stainless Steel
CuInSe2 nanoparticles were successfully deposited on the surface of TiO2 nanotube arrays (NTAs) by a solvothermal method for the photocathodic protection (PCP) of metals. Compared with TiO2 NTAs, the CuInSe2/TiO2 composites exhibited stronger visible light absorption and higher photoelectric conversion efficiency. After 316 Stainless Steel (SS) was coupled with CuInSe2/TiO2, the potential of 316 SS could drop to −0.90 V. The photocurrent density of CuInSe2/TiO2 connected to 316 SS reached 140 μA cm−2, which was four times that of TiO2 NTAs. The composites exhibited a protective effect in the dark state for more than 8 h after 4 h of visible light illumination. The above could be attributed to increased visible light absorption, the extended lifetime of photogenerated electrons, and generation of oxygen vacancies.
Open AccessHighly Efficient CuInSe2 Sensitized TiO2 Nanotube Films for Photocathodic Protection of 316 Stainless Steel
CuInSe2 nanoparticles were successfully deposited on the surface of TiO2 nanotube arrays (NTAs) by a solvothermal method for the photocathodic protection (PCP) of metals. Compared with TiO2 NTAs, the CuInSe2/TiO2 composites exhibited stronger visible light absorption and higher photoelectric conversion efficiency. After 316 Stainless Steel (SS) was coupled with CuInSe2/TiO2, the potential of 316 SS could drop to −0.90 V. The photocurrent density of CuInSe2/TiO2 connected to 316 SS reached 140 μA cm−2, which was four times that of TiO2 NTAs. The composites exhibited a protective effect in the dark state for more than 8 h after 4 h of visible light illumination. The above could be attributed to increased visible light absorption, the extended lifetime of photogenerated electrons, and generation of oxygen vacancies.
- Open Access
- 23 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (17) , 2897
Effective Removal of Tetracycline from Water Using Copper Alginate @ Graphene Oxide with In-Situ Grown MOF-525 Composite: Synthesis, Characterization and Adsorption Mechanisms
For nanomaterials, such as GO and MOF-525, aggregation is the main reason limiting their adsorption performance. In this research, Alg-Cu@GO@MOF-525 was successfully synthesized by in-situ growth of MOF-525 on Alg-Cu@GO. By dispersing graphene oxide (GO) with copper alginate (Alg-Cu) with three-dimensional structure, MOF-525 was in-situ grown to reduce aggregation. The measured specific surface area of Alg-Cu@GO@MOF-525 was as high as 807.30 m2·g−1, which is very favorable for adsorption. The synthesized material has affinity for a variety of pollutants, and its adsorption performance is significantly enhanced. In particular, tetracycline (TC) was selected as the target pollutant to study the adsorption behavior. The strong acid environment inhibited the adsorption, and the removal percentage reached 96.6% when pH was neutral. Temperature promoted the adsorption process, and 318 K adsorption performance was the best under experimental conditions. Meanwhile, 54.6% of TC could be removed in 38 min, and the maximum adsorption capacity reached 533 mg·g−1, far higher than that of conventional adsorption materials. Kinetics and isotherms analysis show that the adsorption process accords with Sips model and pseudo-second-order model. Thermodynamic study further shows that the chemisorption is spontaneous and exothermic. In addition, pore-filling, complexation, π-π stack, hydrogen bond and chemisorption are considered to be the causes of adsorption.
- 23 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (17) , 2897
Open AccessEffective Removal of Tetracycline from Water Using Copper Alginate @ Graphene Oxide with In-Situ Grown MOF-525 Composite: Synthesis, Characterization and Adsorption Mechanisms
For nanomaterials, such as GO and MOF-525, aggregation is the main reason limiting their adsorption performance. In this research, Alg-Cu@GO@MOF-525 was successfully synthesized by in-situ growth of MOF-525 on Alg-Cu@GO. By dispersing graphene oxide (GO) with copper alginate (Alg-Cu) with three-dimensional structure, MOF-525 was in-situ grown to reduce aggregation. The measured specific surface area of Alg-Cu@GO@MOF-525 was as high as 807.30 m2·g−1, which is very favorable for adsorption. The synthesized material has affinity for a variety of pollutants, and its adsorption performance is significantly enhanced. In particular, tetracycline (TC) was selected as the target pollutant to study the adsorption behavior. The strong acid environment inhibited the adsorption, and the removal percentage reached 96.6% when pH was neutral. Temperature promoted the adsorption process, and 318 K adsorption performance was the best under experimental conditions. Meanwhile, 54.6% of TC could be removed in 38 min, and the maximum adsorption capacity reached 533 mg·g−1, far higher than that of conventional adsorption materials. Kinetics and isotherms analysis show that the adsorption process accords with Sips model and pseudo-second-order model. Thermodynamic study further shows that the chemisorption is spontaneous and exothermic. In addition, pore-filling, complexation, π-π stack, hydrogen bond and chemisorption are considered to be the causes of adsorption.