ZLZhaowei Liu

Zhaowei Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhaowei Liu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Parameter-Optimization-Based Maximum Power Reaching for Magnetic Field Energy Harvesters Connected to Buck Converter

    by Zhaowei Liu, Lei Bai, Zhuangyi Tao, Fei Zhang, Fugang Huang, Yong Li, Zhengyou He

    Magnetic field energy harvesters (MFEHs) have emerged as a promising power supply method for online monitoring devices. However, under low current conditions, the magnetic field weakens, presenting challenges such as unstable supply voltage and insufficient power. To improve the adaptability of the MFEH to low currents and enable it to operate stably under such conditions, it is essential for the MFEH to operate near the maximum power point (MPP). To address this vital problem, an MPP reaching method based on parameter optimization is proposed in this work, which can be used to improve the performance of the MFEH. Specifically, the operating characteristics of the MFEH and the startup process of the Buck converter are analyzed. Subsequently, a parameter optimization method is developed, which ensures the simultaneous achievement of constant voltage (CV) output and MPP reaching. An experimental prototype is constructed to verify the effectiveness of the proposal. Experimental results demonstrate that the startup process of the Buck converter is consistent with the theoretical analysis. Furthermore, by adopting the parameter optimization method, the output power is improved at different currents, thereby reducing the current required at the rated power. Under a power requirement of 1 W, compared to N = 70 and N = 210, the required current in the case of N = 140 decreases from 36.3 A and 22.0 A to 20.8 A, representing reductions of 42.7% and 5.5%, respectively. For a power requirement of 3.5 W, the required current decreases from 88.3 A and 66.0 A to 57.0 A, with reductions of 35.4% and 13.6%, respectively.


  • A TMR-Based Wide-Range Current Measurement Method With an Additional Coil for Transmission Lines

    by Yong Li, Zeyu Zang, Zhaowei Liu, Shunpan Liu, Xianglin Wen, Bofeng Luo, Jiefeng Hu, Zhengyou He

    Online monitoring of transmission line current is crucial to ensure the safe and stable operation of the power grid. Current measurement sensors must be adaptable to varying accuracy requirements across different current levels with a broad current measurement range. In this work, a tunnel magnetoresistive (TMR) current measurement sensor structure is proposed for wide-range current measurement requirements. The TMR sensor chip is inserted into the air gap of a double-opening magnetic core, while an additional coil is wound on the magnetic core to adjust its magnetizing current by connecting with different loads. Then, the variation trend of the magnetizing current under resistive, inductive, and capacitive load conditions is examined. The effects of different impedance characteristics on the detected magnetic field are revealed respectively. By connecting an appropriate capacitor in series, the magnetic flux density passing through the TMR sensor can be enhanced, thereby improving the magnetic field under low current conditions and enabling current measurement at low currents. Furthermore, by connecting resistive or inductive loads in series, the magnetic flux density can be reduced, thereby delaying magnetic core saturation and enabling high current measurement. The experimental results reveal that when a 32 μF capacitive load is connected to the additional coil, the sensor can achieve accurate measurement within the low-current range (5–30 A), and the maximum error is 0.29%. Meanwhile, when a 0.1 Ω resistive load is connected, the current measurement range can be expanded to a wide range (30–620 A), and its maximum error is 0.68%.

  • A Wide-Range Self-Powered Current Measurement Method Based on Induced Current Multiplexing for Online Monitoring Devices in Transmission Lines

    by Zhaowei Liu, Yong Li, Ziqian Hu, Zeyu Zang, Xianglin Wen, Zhengyou He

    To address saturation issues in current measurement devices under high currents, a winding wound on the core, driven by a power amplifier, is utilized to counterbalance the magnetic field generated by the measured current in the traditional method. However, this method consumes a significant amount of energy, and the power consumption increases under higher currents, limiting its applicability. To address this vital problem, a wide-range self-powered current measurement method is proposed in this work. The dual-core structure-based self-powered current measurement system integrates a magnetic field energy harvester (MFEH) and a current measurer (CM). In this system, the windings of the MFEH and the CM are connected in series, and the induced current of the MFEH is multiplexed. On one hand, it flows through the load for energy harvesting. Simultaneously, it flows into the CM, reducing the magnetic field within the air gap, and thereby broadening the range of current measurements. Besides, the equivalent circuit model of the dual-core structure is established to analyze the principles of current measurement and energy harvesting. Subsequently, a voltage regulation circuit based on an active rectifier is implemented, which can mitigate the saturation of the magnetic core over a wide current range. A laboratory prototype is built to verify the effectiveness of the proposal. The results show that the output voltage can be maintained at 3.3 V, ensuring stable voltage output. At 300 A $_{\mathbf{rms}}$ , the maximum harvesting power reaches 1.83 W. Additionally, the upper limit of the measured current can reach 600 A $_{\mathbf{rms}}$ , with a maximum error of 0.54%.


  • A Maximum-Power-Point Tracking Method Based on Constant Conduction Time Control With Constant Voltage Output for Magnetic Field Energy Harvesters in the Saturated Region

    by Zhaowei Liu, Yong Li, Xianglin Wen, Ziqian Hu, Huanyu Yang, Zhengyou He

    To improve the power density of magnetic field energy harvesters (MFEHs) and supply stable voltage output, a maximum-power-point tracking (MPPT) method with constant voltage (CV) output for the MFEH in the saturated region is proposed. The proposed MFEH system consists of a bidirectional buck-boost converter connected with a supercapacitor and an active rectifier. The bidirectional buck-boost converter is employed for CV output control, and MPPT under CV output conditions is realized by controlling the conduction time of the active rectifier. Besides, the calculation formula for the optimal conduction time in the saturated region is derived, which is constant and does not vary with the primary current. Subsequently, the optimal coil turn design method of the MFEH under optimal conduction time control is proposed, which can be used to guide the design of the coil turns. An experimental prototype is constructed to verify the effectiveness of the proposal. Experimental results demonstrate that the output voltage can be maintained at 3.3V, and CV output can be realized. Besides, compared to conventional methods, the output power of the MFEH with the proposed method at 50 Arms increases from 0.47 W to 0.60 W, achieving a 27% improvement.


  • An Effective Power Improving Method of Magnetic Field Energy Harvesters Using a Series-Connected Capacitor for Wireless Sensors in Smart Grids

    by Yong Li, Na Duan, Zhaowei Liu, Xianglin Wen, Peng Li, Zhiming Wang, Jiefeng Hu, Zhengyou He

    The low power density of a magnetic field energy harvester (MFEH) limits its applicability. Conventional methods for improving power harvesting, e.g., increasing the volume of the magnetic core, cannot effectively increase the output power density of the MFEH and it increases the burden on the transmission lines. An in-depth investigation reveals that by adding an optimal series-connected capacitor before the rectifier, the output power of the MFEH can be maximized. By reducing the net voltage applied to the magnetizing inductance, the flux accumulation is slower, lengthening the energy harvesting time, and the output power is increased. Furthermore, the output power can be maximized with an optimal series-connected capacitor. The design method of the optimal series-connected capacitor is theoretically analyzed in this article, which is only related to the load characteristics. In addition, the proposed method has a simple structure and can effectively improve the system power density of the MFEH. An experimental prototype is constructed to verify the effectiveness of the proposed method, and the results agree well with the theoretical analysis. Compared with the conventional MFEH without a series-connected capacitor, the method presented in this article can increase the harvested power by approximately 50%.


  • An Energy Management Method for Magnetic Field Energy Harvesters Under Wide-Range Current in Railway Electrification Systems

    by Zhaowei Liu, Yong Li, Na Duan, Zhengyou He

    The wide-range traction current brings great challenges to the stable operation of the magnetic field energy harvester (MFEH). Specifically, when the traction current is large, the core saturation increases, resulting in violent vibration of the magnetic core. When the traction current is low, the energy harvested by the MFEH is insufficient to power the load. To address these vital problems, an energy management method for MFEH is proposed to track the critical saturation point, i.e., the maximum power point in the unsaturated region. In this method, by regulating the equivalent load, the core voltage is controlled at the critical saturation voltage under different current levels. Moreover, the supercapacitor is employed to store excess energy at large currents, and the stored energy is released at low currents. Furthermore, a design procedure for the core and winding is proposed in this work, which can be used to adjust the critical saturation voltage of the MFEH. A laboratory prototype is built to verify the effectiveness of the proposal. The results show that the MFEH can operate at the critical saturation point and provide stable energy for the load under different current levels. This means that saturation suppression, maximum power point tracking, and energy management can be realized by applying the proposed method.


  • An Accurate Power Model and High Power Density Design Method of Free-Standing Magnetic Field Energy Harvesters With H-Shaped Core

    by Huanyu Yang, Yong Li, Zhaowei Liu, Haijun Luo, Yihua Yan, Zhengyou He

    To achieve more output power of the free-standing magnetic field energy harvester (FSMFEH) with a smaller core volume, designing the core and coil parameters of FSMFEH is critical. However, the lack of an FSMFEH power model leads to the absence of a detailed design method. To address this issue, building an accurate FSMFEH output power model is required. In this article, by quantifying coil mutual inductance and internal resistance as core and coil parameters, an accurate power model of FSMFEH with all parameters is established based on the H-shaped core. As a result, based on the proposed model, the optimal values of the core column size, the core lamination size, the coil turns, and the wire diameter are designed. Experiment results show that the proposed model can maintain high accuracy, and the power density deviation is within 5% compared with the theoretical value. Besides, the optimized parameters designed according to the model analysis are effective for improving the power density. When the current of the busbar is 100 A, the maximum power density can reach 4.182 mW/cm 3 , and the corresponding maximum output power is 13.25 mW with the optimized parameters.


  • Impedance-Matching-Based Maximum Power Tracking for Magnetic Field Energy Harvesters Using Active Rectifiers

    by Yong Li, Na Duan, Zhaowei Liu, Jiefeng Hu, Zhengyou He

    Increasing the power harvested from magnetic field energy harvesters (MFEHs) without expanding their volumes is crucial. Conventional methods for improving power harvest, e.g., flux-shaping capacitor and transfer window alignment techniques, are not applicable under varying primary current and load conditions. To address this vital problem, in this article, we present a control strategy of MFEHs based on impedance-matching theory, which considers the nonlinear characteristic of magnetic energy sources and can track the maximum power under varying current and load conditions based on an active rectifier. A calculation formula is derived to determine the optimal initial operating point of the active rectifier circuit, which aims to adjust the equivalent impedance to achieve maximum power tracking. An experimental prototype is constructed to verify the effectiveness of the proposed method. It is found that the proposed method enhances the harvested power under different current and load conditions, particularly in deep saturation conditions. The experimental results show that the proposed MFEH can harvest an average power of 2.51 W on an 800 Ω load from a 50 Hz 80 A RMS power line, which is increased by 136.8% compared with the conventional MFEH with a passive rectifier.


  • An Accurate Model of Magnetic Energy Harvester in the Saturated Region for Harvesting Maximum Power: Analysis, Design, and Experimental Verification

    by Zhaowei Liu, Yong Li, Huanyu Yang, Na Duan, Zhengyou He

    To reduce the size and weight of the magnetic energy harvester (MEH), the magnetic core should be designed to work in the maximum power region, i.e., in the saturated region. However, the conventional analysis model of the MEH, which ignores the phase difference between the primary and secondary currents, is only suitable for the unsaturated region. When the core is in the saturated region, the results of the numerical calculation severely deviate from the experimental observations due to the non-negligible phase difference. To address this vital problem, this article establishes an excitation current model (ECM) to calculate the phase difference caused by the magnetizing inductance. An accurate model of the MEH is presented based on the ECM in this article, which can calculate the harvesting power of the MEH in the saturated region. Besides, a strategy for finding the maximum power point is proposed, which can be used for the designing of the MEH. Finally, an experimental prototype is constructed to verify the effectiveness of the proposed analysis model and the design method of the MEH. The experimental results show that the proposed analysis model can maintain high accuracy when the magnetic core enters the saturated region, and the MEH designed by the proposed model can reach the expected power with a compact size. Compared with the theoretical value, the output voltage deviation of the MEH is only 0.4%, and the output power deviation is only 0.8%.