Majid Davtalab-Ghazimahalleh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Majid Davtalab-Ghazimahalleh has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
- Seyed Mohsen Hosseini-Golgoo
Department of Electrical Engineering, University of Guilan, Rasht, Iran
2 shared publications
Latest Publications
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-8
Gas Sensing Measurements of a Novel NO₂ Sensor Using K₂CO₃/Al₂O₃ Composite Pellets From Resistive Aspect
K 2 CO 3 /Al 2 O 3 composite pellets connected to gold contacts were employed as resistive NO 2 sensor. Gas sensing experiments showed that this structure has an acceptable response to NO 2 at room temperature and its response increases drastically as the operating temperature decreases. It was found that highest gas-solid interactions occurred at T =10°C with sensor response of 44 in the presence of 900 ppb NO 2 . Evaluations of the response and recovery times of the sensor suggested that these parameters also significantly improved when sensor operates at room temperature. Typically, the response and recovery times to 900 ppb NO 2 at room temperature (25°C) were 65 s and 473 s, respectively. NO 2 detection limit is estimated to be 4 ppb at room temperature and 2 ppb at 10oC. The linearity of the calibration curve in the NO 2 concentration range between 40-1500 ppb combined with good selectivity, especially among alcoholic gases, makes this structure a good sub-ppm selective NO 2 sensor at room temperature and cold body state.
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-8
Gas Sensing Measurements of a Novel NO₂ Sensor Using K₂CO₃/Al₂O₃ Composite Pellets From Resistive Aspect
K 2 CO 3 /Al 2 O 3 composite pellets connected to gold contacts were employed as resistive NO 2 sensor. Gas sensing experiments showed that this structure has an acceptable response to NO 2 at room temperature and its response increases drastically as the operating temperature decreases. It was found that highest gas-solid interactions occurred at T =10°C with sensor response of 44 in the presence of 900 ppb NO 2 . Evaluations of the response and recovery times of the sensor suggested that these parameters also significantly improved when sensor operates at room temperature. Typically, the response and recovery times to 900 ppb NO 2 at room temperature (25°C) were 65 s and 473 s, respectively. NO 2 detection limit is estimated to be 4 ppb at room temperature and 2 ppb at 10oC. The linearity of the calibration curve in the NO 2 concentration range between 40-1500 ppb combined with good selectivity, especially among alcoholic gases, makes this structure a good sub-ppm selective NO 2 sensor at room temperature and cold body state.
- 31 August 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (9) , 12746-12755
Resistive Modeling of a Novel K2CO3/Al2O3 Nanostructure as a Solid Electrolyte NO2 Sensor
- 31 August 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (9) , 12746-12755
Resistive Modeling of a Novel K2CO3/Al2O3 Nanostructure as a Solid Electrolyte NO2 Sensor