Davide Cavalieri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Davide Cavalieri has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Francesco Creta
Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Rome, Italy
7 shared publications - Pasquale Eduardo Lapenna
Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Rome, Italy
7 shared publications - Davide Schintu6 shared publications
- Jacopo Liberatori
Sapienza University of Rome
6 shared publications - Pietro Paolo Ciottoli
Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Rome, Italy
6 shared publications - Matteo Blandino
University of Rome “La Sapienza
5 shared publications
Latest Publications
- 23 October 2026
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 117 (4) , 44
Role of Phase Separation in Transcritical Mixing Layers Under Liquid Rocket Engine Conditions
- 23 October 2026
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 117 (4) , 44
Role of Phase Separation in Transcritical Mixing Layers Under Liquid Rocket Engine Conditions
- Open Access
- 21 August 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
A consistent filtered formulation for flame propagation with generic progress variables: Application to lean hydrogen-air flames
- 21 August 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessA consistent filtered formulation for flame propagation with generic progress variables: Application to lean hydrogen-air flames
- Open Access
- 21 July 2026
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 117 (2) , 18
Flame-Resolved and Filtered Tabulated-Chemistry Simulations of a Turbulent Bluff-Body Stabilized Premixed Hydrogen-Air Flame
This work presents a flame resolved direct numerical simulation (DNS) and three Large Eddy Simulations (LES) of the bluff-body stabilized turbulent premixed $$\textrm{H}_{2}$$ -air flame experimentally studied at NTNU. The DNS are compared to experimental data, and the velocity fields, heat release rate, and OH distributions, show good overall agreement. An Optimal Estimator analysis is conducted in order to identify the set of progress variables most suited to represent the thermochemical states present in the DNS on a tabulated manifold. The resulting progress variable set is used to construct a tabulated manifold through 1D unstretched laminar flamelets, which is combined with a consistent FTACLES formulation to conduct three Large Eddy Simulations (LES) of the same burner. The three LES, differing in the subgrid wrinkling model considered, show a good agreement with the DNS velocity fields, but fail in reproducing correctly the heat release rate and the $$ Y_{\textrm{OH}}$$ distribution, while consistently overpredicting the temperature values. These findings, combined with the analysis of the joint Probability Density Functions of the LES, suggest that the inclusion of a wrinkling factor is not enough for the correct reproduction of the flame with the adopted formulation, and strained flamelets should be included in the generated manifold.- 21 July 2026
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 117 (2) , 18
Open AccessFlame-Resolved and Filtered Tabulated-Chemistry Simulations of a Turbulent Bluff-Body Stabilized Premixed Hydrogen-Air Flame
This work presents a flame resolved direct numerical simulation (DNS) and three Large Eddy Simulations (LES) of the bluff-body stabilized turbulent premixed $$\textrm{H}_{2}$$ -air flame experimentally studied at NTNU. The DNS are compared to experimental data, and the velocity fields, heat release rate, and OH distributions, show good overall agreement. An Optimal Estimator analysis is conducted in order to identify the set of progress variables most suited to represent the thermochemical states present in the DNS on a tabulated manifold. The resulting progress variable set is used to construct a tabulated manifold through 1D unstretched laminar flamelets, which is combined with a consistent FTACLES formulation to conduct three Large Eddy Simulations (LES) of the same burner. The three LES, differing in the subgrid wrinkling model considered, show a good agreement with the DNS velocity fields, but fail in reproducing correctly the heat release rate and the $$ Y_{\textrm{OH}}$$ distribution, while consistently overpredicting the temperature values. These findings, combined with the analysis of the joint Probability Density Functions of the LES, suggest that the inclusion of a wrinkling factor is not enough for the correct reproduction of the flame with the adopted formulation, and strained flamelets should be included in the generated manifold. - Open Access
- 9 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Heterogeneous autoignition of an isoparaffinic alcohol-to-jet fuel droplet cloud with preferential evaporation
- 9 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessHeterogeneous autoignition of an isoparaffinic alcohol-to-jet fuel droplet cloud with preferential evaporation
- Open Access
- 7 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Assessment of flamelet-based modeling for large eddy simulations of doubly transcritical methane/oxygen flames
- 7 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessAssessment of flamelet-based modeling for large eddy simulations of doubly transcritical methane/oxygen flames
- Open Access
- 11 June 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 177
Large Eddy simulation and data-driven surrogate modeling of high-pressure cryogenic oxygen jets in crossflow
- 11 June 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 177
Open AccessLarge Eddy simulation and data-driven surrogate modeling of high-pressure cryogenic oxygen jets in crossflow
- Open Access
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Large-eddy simulations of transcritical mixing of conventional and sustainable aviation fuels
Drop-in sustainable aviation fuels (SAFs), in conjunction with gas turbines featuring increased overall pressure ratios, are central to the decarbonization of the aviation sector in the short to medium term. However, the impact of SAF thermophysical properties on mixing processes under transcritical conditions, supported by the development of suitable numerical methodologies to represent multi-component aviation fuels, remains underinvestigated. In this study, a diffuse-interface large-eddy simulation framework, incorporating real-fluid thermodynamics based on the Peng–Robinson equation of state together with multi-component transport, is employed to analyze a single-round injector operating at 60 bar and 900 K ambient temperature. Three aviation fuels, represented by ad hoc physicochemical surrogate mixtures, are considered: a conventional petroleum-derived jet fuel (Jet A-2), an alcohol-to-jet sustainable aviation fuel (C-1 AtJ), and a 50% volumetric blend of the two, each injected at 322 K. Although the flow fields are broadly similar across all investigated fuels, statistical analyses reveal that compositional differences in the multi-component surrogates significantly alter their thermophysical properties, thereby governing the mixing dynamics under transcritical conditions. Quantitatively, Jet A-2 exhibits an approximately 27% shorter potential core and 10% wider mixing layers relative to C-1 AtJ. Furthermore, it shows temperatures 30–50 K higher in the transitional zone, while the 50% volumetric blend consistently displays intermediate behavior. These results demonstrate that the thermophysical response in the pseudo-boiling regime, particularly the fuel-specific heat capacity, governs transcritical injection and mixing in aeronautical fuel injectors.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Open AccessLarge-eddy simulations of transcritical mixing of conventional and sustainable aviation fuels
Drop-in sustainable aviation fuels (SAFs), in conjunction with gas turbines featuring increased overall pressure ratios, are central to the decarbonization of the aviation sector in the short to medium term. However, the impact of SAF thermophysical properties on mixing processes under transcritical conditions, supported by the development of suitable numerical methodologies to represent multi-component aviation fuels, remains underinvestigated. In this study, a diffuse-interface large-eddy simulation framework, incorporating real-fluid thermodynamics based on the Peng–Robinson equation of state together with multi-component transport, is employed to analyze a single-round injector operating at 60 bar and 900 K ambient temperature. Three aviation fuels, represented by ad hoc physicochemical surrogate mixtures, are considered: a conventional petroleum-derived jet fuel (Jet A-2), an alcohol-to-jet sustainable aviation fuel (C-1 AtJ), and a 50% volumetric blend of the two, each injected at 322 K. Although the flow fields are broadly similar across all investigated fuels, statistical analyses reveal that compositional differences in the multi-component surrogates significantly alter their thermophysical properties, thereby governing the mixing dynamics under transcritical conditions. Quantitatively, Jet A-2 exhibits an approximately 27% shorter potential core and 10% wider mixing layers relative to C-1 AtJ. Furthermore, it shows temperatures 30–50 K higher in the transitional zone, while the 50% volumetric blend consistently displays intermediate behavior. These results demonstrate that the thermophysical response in the pseudo-boiling regime, particularly the fuel-specific heat capacity, governs transcritical injection and mixing in aeronautical fuel injectors.
- Top Cited PapersOpen Access
BayeSAF: Emulation and design of sustainable alternative fuels via Bayesian inference and descriptors-based machine learning
- Open Access
- 20 February 2026
- Published by Elsevier in SSRN Electronic Journal
Large Eddy Simulation and data-driven surrogate modeling of high-pressure cryogenic oxygen jets in crossflow
In this work, the mixing characteristics of a transcritical liquid oxygen jet injected into a vitiated crossflow are investigated at an operating pressure of 100 bar. A comprehensive parametric analysis is performed using Large Eddy Simulations (LES) coupled with tabulated chemistry to decouple the effects of the momentum flux ratio (J) and the jet Reynolds number (Rej). Results indicate that while J primarily governs global jet penetration, Rej significantly affects the near-field topology. At low Reynolds numbers, thermal expansion effects dominate over inertia, leading to a pronounced radial spreading of the dense core, whereas higher Reynolds numbers extend the liquid-like core length. To enable rapid design space exploration, the high-fidelity database is leveraged to train a resolution-invariant surrogate model based on Fourier Neural Operators (FNO). The proposed model accurately infers the time-averaged scalar field and jet trajectory for unseen operating conditions, capturing the non-linearities more effectively than classical empirical correlations. The surrogate demonstrates a speed-up of several orders of magnitude compared to the CFD solver, proving to be a robust tool for the preliminary design of high-pressure propulsion systems.
- 20 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLarge Eddy Simulation and data-driven surrogate modeling of high-pressure cryogenic oxygen jets in crossflow
In this work, the mixing characteristics of a transcritical liquid oxygen jet injected into a vitiated crossflow are investigated at an operating pressure of 100 bar. A comprehensive parametric analysis is performed using Large Eddy Simulations (LES) coupled with tabulated chemistry to decouple the effects of the momentum flux ratio (J) and the jet Reynolds number (Rej). Results indicate that while J primarily governs global jet penetration, Rej significantly affects the near-field topology. At low Reynolds numbers, thermal expansion effects dominate over inertia, leading to a pronounced radial spreading of the dense core, whereas higher Reynolds numbers extend the liquid-like core length. To enable rapid design space exploration, the high-fidelity database is leveraged to train a resolution-invariant surrogate model based on Fourier Neural Operators (FNO). The proposed model accurately infers the time-averaged scalar field and jet trajectory for unseen operating conditions, capturing the non-linearities more effectively than classical empirical correlations. The surrogate demonstrates a speed-up of several orders of magnitude compared to the CFD solver, proving to be a robust tool for the preliminary design of high-pressure propulsion systems.
- Open Access
Multi-component HyChem kinetic mechanism generation using trust-region Bayesian optimization