Sihui Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Sihui Dong has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Shiqun Li
College of Zhan Tianyou, Dalian Jiaotong University, Dalian 116028, China
12 shared publications - Kang Wang
School of Management, Shenyang Jianzhu University, Shenyang 110168, China
9 shared publications - Hangyu Zhang
School of Transportation Engineering, Dalian Jiaotong University, Dalian 116028, China
4 shared publications - Ni Jia
School of Transportation Engineering, Dalian Jiaotong University, Dalian 116028, China
4 shared publications - Yuebiao Zhao
School of Transportation Engineering, Dalian Jiaotong University, Dalian 116028, China
3 shared publications - Chenxu Jia
School of Traffic and Transportation Engineering, Dalian Jiaotong University, Dalian 116028, China
2 shared publications
Latest Publications
- Open Access
Lightweight Design of the Baffle Structure in a High-Speed-Train Water Tank Based on an Improved Multi-Objective Particle Swarm Optimization Algorithm
Lightweight design of high-speed-train water tanks can easily lower the natural frequency of baffles, increasing the risk of resonance and fatigue failure and thus threatening operational safety. To address this issue, a lightweight optimization method that does not reduce the first-order natural frequency of the baffle is proposed, taking a suspended water tank of a certain type of CRH electric multiple unit (EMU) as the research object. First, a two-way fluid–structure interaction (FSI) finite element model was established based on the computational fluid dynamics (CFD) method. The design of experiments method was employed to determine the optimal number of baffles inside the tank, and the response surface methodology was applied to construct quadratic polynomial surrogate models for baffle mass, maximum water tank stress, baffle deformation, and the first-order natural frequency. Analysis of variance was conducted to verify the fitting accuracy and significance of each model. After clarifying the influence of design variables on the response indicators, and to overcome the shortcomings of the standard multi-objective particle swarm optimization (MOPSO) algorithm, such as susceptibility to local optima, simplistic constraint handling, and premature convergence, an improved multi-objective particle swarm optimization (IMOPSO) algorithm integrating chaotic initialization, adaptive parameter adjustment, and a dynamic mutation strategy was proposed. With the first-order natural frequency serving as a constraint, multi-objective optimization of the baffle structure was carried out. Finally, the prediction accuracy of the surrogate models was numerically validated using finite element simulation software. The results show that after optimization, the baffle mass was reduced by 16.13%, the first-order natural frequency increased by 0.41 Hz (by FEM), the maximum water tank stress decreased by 288 Pa (by FEM), and the baffle deformation was reduced by 7.66% according to FEM verification (RSM surrogate-model prediction gave a reduction of 9.07%). The maximum prediction error of the surrogate models was only 1.53%, confirming the effectiveness and feasibility of the proposed method. This study can provide a theoretical basis and engineering reference for the improvement and performance optimization of water tanks on CRH EMUs and other similar tank structures.
Open AccessLightweight Design of the Baffle Structure in a High-Speed-Train Water Tank Based on an Improved Multi-Objective Particle Swarm Optimization Algorithm
Lightweight design of high-speed-train water tanks can easily lower the natural frequency of baffles, increasing the risk of resonance and fatigue failure and thus threatening operational safety. To address this issue, a lightweight optimization method that does not reduce the first-order natural frequency of the baffle is proposed, taking a suspended water tank of a certain type of CRH electric multiple unit (EMU) as the research object. First, a two-way fluid–structure interaction (FSI) finite element model was established based on the computational fluid dynamics (CFD) method. The design of experiments method was employed to determine the optimal number of baffles inside the tank, and the response surface methodology was applied to construct quadratic polynomial surrogate models for baffle mass, maximum water tank stress, baffle deformation, and the first-order natural frequency. Analysis of variance was conducted to verify the fitting accuracy and significance of each model. After clarifying the influence of design variables on the response indicators, and to overcome the shortcomings of the standard multi-objective particle swarm optimization (MOPSO) algorithm, such as susceptibility to local optima, simplistic constraint handling, and premature convergence, an improved multi-objective particle swarm optimization (IMOPSO) algorithm integrating chaotic initialization, adaptive parameter adjustment, and a dynamic mutation strategy was proposed. With the first-order natural frequency serving as a constraint, multi-objective optimization of the baffle structure was carried out. Finally, the prediction accuracy of the surrogate models was numerically validated using finite element simulation software. The results show that after optimization, the baffle mass was reduced by 16.13%, the first-order natural frequency increased by 0.41 Hz (by FEM), the maximum water tank stress decreased by 288 Pa (by FEM), and the baffle deformation was reduced by 7.66% according to FEM verification (RSM surrogate-model prediction gave a reduction of 9.07%). The maximum prediction error of the surrogate models was only 1.53%, confirming the effectiveness and feasibility of the proposed method. This study can provide a theoretical basis and engineering reference for the improvement and performance optimization of water tanks on CRH EMUs and other similar tank structures.
- Open Access
Optimization of Differentiated Pricing Strategies for Freeways Considering Vehicle Collision Probability
In response to the limitations of the conventional fixed-rate pricing model for freeways in addressing spatiotemporal imbalances in traffic flow distribution and low road network resource utilization, as well as the neglect of Vehicle Collision probability in existing differentiated pricing frameworks, this study analyzes the underlying relationship between road traffic saturation and collision probability. On this basis, a bi-level programming model for differentiated freeway pricing that explicitly accounts for Vehicle Collision probability is developed. The upper-level model maximizes the economic benefit of freeway operations while incorporating vehicle-collision-probability-related costs, whereas the lower-level model minimizes vehicle travel impedance, including both travel cost and time delays induced by collisions. A hybrid algorithm combining particle swarm optimization (PSO) and pattern search (PS) is employed to solve the optimal pricing scheme across different vehicle types (passenger cars and trucks), road segments, and time periods. A nested Logit model is introduced to characterize travelers’ route choice behavior between alternative routes, thereby capturing the traffic redistribution effect induced by pricing rate adjustments. Empirical data from a section of the Shenyang–Haikou Freeway corridor in China for the year 2024 are used for model calibration and validation. The results indicate that following the optimized pricing scheme, the freeway’s monthly net revenue increased by 9.44%, truck and passenger car traffic volumes rose by 8.59% and 6.12%, respectively, and total segment traffic volume increased by 7.18%. The saturation of the freeway increased from approximately 0.18 to about 0.32, while that of the parallel arterial decreased from approximately 0.9 to about 0.67, indicating a more balanced traffic flow distribution across the network and a substantial reduction in Vehicle Collision probability. These findings demonstrate that the proposed method can effectively balance the trade-offs among operational revenue, traffic efficiency, and driving safety, providing both theoretical support and a quantitative tool for the scientific formulation of differentiated freeway pricing schemes.
Open AccessOptimization of Differentiated Pricing Strategies for Freeways Considering Vehicle Collision Probability
In response to the limitations of the conventional fixed-rate pricing model for freeways in addressing spatiotemporal imbalances in traffic flow distribution and low road network resource utilization, as well as the neglect of Vehicle Collision probability in existing differentiated pricing frameworks, this study analyzes the underlying relationship between road traffic saturation and collision probability. On this basis, a bi-level programming model for differentiated freeway pricing that explicitly accounts for Vehicle Collision probability is developed. The upper-level model maximizes the economic benefit of freeway operations while incorporating vehicle-collision-probability-related costs, whereas the lower-level model minimizes vehicle travel impedance, including both travel cost and time delays induced by collisions. A hybrid algorithm combining particle swarm optimization (PSO) and pattern search (PS) is employed to solve the optimal pricing scheme across different vehicle types (passenger cars and trucks), road segments, and time periods. A nested Logit model is introduced to characterize travelers’ route choice behavior between alternative routes, thereby capturing the traffic redistribution effect induced by pricing rate adjustments. Empirical data from a section of the Shenyang–Haikou Freeway corridor in China for the year 2024 are used for model calibration and validation. The results indicate that following the optimized pricing scheme, the freeway’s monthly net revenue increased by 9.44%, truck and passenger car traffic volumes rose by 8.59% and 6.12%, respectively, and total segment traffic volume increased by 7.18%. The saturation of the freeway increased from approximately 0.18 to about 0.32, while that of the parallel arterial decreased from approximately 0.9 to about 0.67, indicating a more balanced traffic flow distribution across the network and a substantial reduction in Vehicle Collision probability. These findings demonstrate that the proposed method can effectively balance the trade-offs among operational revenue, traffic efficiency, and driving safety, providing both theoretical support and a quantitative tool for the scientific formulation of differentiated freeway pricing schemes.
- Open Access
- 11 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 1807
Research on Acoustic-Black-Hole-Type Baffles for Suspended Water Tanks of High-Speed Trains: Considering Vibration and Wave Suppression Characteristics
To mitigate structural vibrations caused by liquid sloshing inside the suspended water tank of high-speed trains and to prevent issues such as baffle fatigue failure and water leakage from tank cracking, this study designed an acoustic black hole (ABH)-type baffle that comprehensively considers both vibration and wave suppression performance. Based on acoustic black hole (ABH) theory, numerical simulations were conducted using the CFD software Fluent to analyze the vibration and wave suppression characteristics of the ABH-type baffle under lateral and longitudinal impact conditions. The influence of the position and number of ABH structures on the baffle’s performance was systematically examined. Finally, the structural strength and the vibration/wave suppression capability of the baffle were validated. The results demonstrate that the structural strength of the ABH-type baffle meets the design requirements. Compared to a conventional baffle, the ABH-type baffle reduces the liquid sloshing force inside the tank, lowers the peak sloshing pressure under various operating conditions, and decreases the surface vibration velocity of the baffle within its dominant vibration frequency range of 0–100 Hz. The optimal positions of the ABH are located at the 80% and 20% water level lines of the baffle. The ABH-type baffle achieves the best suppression performance when the center of the ABH is horizontally aligned with the liquid surface. In addition, the vibration and wave suppression capability of the ABH-type baffle decreases when the number of ABHs is more or less than three.
- 11 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 1807
Open AccessResearch on Acoustic-Black-Hole-Type Baffles for Suspended Water Tanks of High-Speed Trains: Considering Vibration and Wave Suppression Characteristics
To mitigate structural vibrations caused by liquid sloshing inside the suspended water tank of high-speed trains and to prevent issues such as baffle fatigue failure and water leakage from tank cracking, this study designed an acoustic black hole (ABH)-type baffle that comprehensively considers both vibration and wave suppression performance. Based on acoustic black hole (ABH) theory, numerical simulations were conducted using the CFD software Fluent to analyze the vibration and wave suppression characteristics of the ABH-type baffle under lateral and longitudinal impact conditions. The influence of the position and number of ABH structures on the baffle’s performance was systematically examined. Finally, the structural strength and the vibration/wave suppression capability of the baffle were validated. The results demonstrate that the structural strength of the ABH-type baffle meets the design requirements. Compared to a conventional baffle, the ABH-type baffle reduces the liquid sloshing force inside the tank, lowers the peak sloshing pressure under various operating conditions, and decreases the surface vibration velocity of the baffle within its dominant vibration frequency range of 0–100 Hz. The optimal positions of the ABH are located at the 80% and 20% water level lines of the baffle. The ABH-type baffle achieves the best suppression performance when the center of the ABH is horizontally aligned with the liquid surface. In addition, the vibration and wave suppression capability of the ABH-type baffle decreases when the number of ABHs is more or less than three.
- Open Access
- 15 January 2026
- Published by MDPI AG in Preprints.org
Research on Acoustic Black Hole-Type Baffles for Suspended Water Tanks of High‑Speed Trains: Considering Vibration and Wave Suppression Characteristics
To mitigate structural vibrations caused by liquid sloshing inside the suspended water tank of high-speed trains and to prevent issues such as baffle fatigue failure and water leakage from tank cracking, this study designed an acoustic black hole (ABH)-type baffle that comprehensively considers both vibration and wave suppression performance. Based on acoustic black hole (ABH) theory, numerical simulations were conducted using the CFD software Fluent to analyze the vibration and wave suppression characteristics of the ABH-type baffle under lateral and longitudinal impact conditions. The influence of the position and number of ABH structures on the baffle’s performance was systematically examined. Finally, the structural strength and the vibration/wave suppression capability of the baffle were validated.The results demonstrate that the structural strength of the ABH-type baffle meets the design requirements. Compared to a conventional baffle, the ABH-type baffle reduces the liquid sloshing force inside the tank, lowers the peak sloshing pressure under various operating conditions, and decreases the surface vibration velocity of the baffle within its dominant vibration frequency range of 0–100 Hz. The optimal positions for the ABHs are at the 80% and 20% water-level lines on the baffle, and the best suppression performance is achieved when the center of the ABH is aligned horizontally with the liquid surface. Furthermore, the vibration and wave suppression capability deteriorates when the number of ABHs is either greater or fewer than three.
- 15 January 2026
- Published by MDPI AG in Preprints.org
Open AccessResearch on Acoustic Black Hole-Type Baffles for Suspended Water Tanks of High‑Speed Trains: Considering Vibration and Wave Suppression Characteristics
To mitigate structural vibrations caused by liquid sloshing inside the suspended water tank of high-speed trains and to prevent issues such as baffle fatigue failure and water leakage from tank cracking, this study designed an acoustic black hole (ABH)-type baffle that comprehensively considers both vibration and wave suppression performance. Based on acoustic black hole (ABH) theory, numerical simulations were conducted using the CFD software Fluent to analyze the vibration and wave suppression characteristics of the ABH-type baffle under lateral and longitudinal impact conditions. The influence of the position and number of ABH structures on the baffle’s performance was systematically examined. Finally, the structural strength and the vibration/wave suppression capability of the baffle were validated.The results demonstrate that the structural strength of the ABH-type baffle meets the design requirements. Compared to a conventional baffle, the ABH-type baffle reduces the liquid sloshing force inside the tank, lowers the peak sloshing pressure under various operating conditions, and decreases the surface vibration velocity of the baffle within its dominant vibration frequency range of 0–100 Hz. The optimal positions for the ABHs are at the 80% and 20% water-level lines on the baffle, and the best suppression performance is achieved when the center of the ABH is aligned horizontally with the liquid surface. Furthermore, the vibration and wave suppression capability deteriorates when the number of ABHs is either greater or fewer than three.
- Open Access
- 3 August 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (15) , 7041
Analysis of Risk Factors in the Renovation of Old Underground Commercial Spaces in Resource-Exhausted Cities: A Case Study of Fushun City
Resource-exhausted cities have long played a key role in national energy development. Urban renewal projects, such as the renovation of old underground commercial spaces, can improve urban vitality and promote sustainable development. However, in resource-based cities, traditional industries dominate, while new industries such as modern commerce develop slowly. This results in low economic dynamism and weak motivation for urban development. To address this issue, we propose a systematic method for analyzing construction risks during the decision-making stage of renovation projects. The method includes three steps: risk value assessment, risk factor identification, and risk weight calculation. First, unlike previous studies that only used SWOT for risk factor analysis, we also applied it for project value assessment. Then, using the Work Breakdown Structure–Risk Breakdown Structure framework method (WBS-RBS), we identified specific risk sources by analyzing key construction technologies throughout the entire lifecycle of the renovation project. Finally, to enhance expert consensus, we proposed an improved Delphi–Analytic Hierarchy Process method (Delphi–AHP) to calculate risk indicator weights for different construction phases. The risk analysis covered all lifecycle stages of the renovation and upgrading project. The results show that in the Fushun city renovation case study, the established framework—consisting of five first-level indicators and twenty s-level indicators—enables analysis of renovation projects. Among these, management factors and human factors were identified as the most critical, with weights of 0.3608 and 0.2017, respectively. The proposed method provides a structured approach to evaluating renovation risks, taking into account the specific characteristics of construction work. This can serve as a useful reference for ensuring safe and efficient implementation of underground commercial space renovation projects in resource-exhausted cities.
- 3 August 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (15) , 7041
Open AccessAnalysis of Risk Factors in the Renovation of Old Underground Commercial Spaces in Resource-Exhausted Cities: A Case Study of Fushun City
Resource-exhausted cities have long played a key role in national energy development. Urban renewal projects, such as the renovation of old underground commercial spaces, can improve urban vitality and promote sustainable development. However, in resource-based cities, traditional industries dominate, while new industries such as modern commerce develop slowly. This results in low economic dynamism and weak motivation for urban development. To address this issue, we propose a systematic method for analyzing construction risks during the decision-making stage of renovation projects. The method includes three steps: risk value assessment, risk factor identification, and risk weight calculation. First, unlike previous studies that only used SWOT for risk factor analysis, we also applied it for project value assessment. Then, using the Work Breakdown Structure–Risk Breakdown Structure framework method (WBS-RBS), we identified specific risk sources by analyzing key construction technologies throughout the entire lifecycle of the renovation project. Finally, to enhance expert consensus, we proposed an improved Delphi–Analytic Hierarchy Process method (Delphi–AHP) to calculate risk indicator weights for different construction phases. The risk analysis covered all lifecycle stages of the renovation and upgrading project. The results show that in the Fushun city renovation case study, the established framework—consisting of five first-level indicators and twenty s-level indicators—enables analysis of renovation projects. Among these, management factors and human factors were identified as the most critical, with weights of 0.3608 and 0.2017, respectively. The proposed method provides a structured approach to evaluating renovation risks, taking into account the specific characteristics of construction work. This can serve as a useful reference for ensuring safe and efficient implementation of underground commercial space renovation projects in resource-exhausted cities.
- Open Access
- 16 July 2025
- Published by MDPI AG in Preprints.org
Handedness and Handling Safety: Exploring the Representation of Handedness in Emergency Human-Computer Interaction
Handedness, as an inherent characteristic in the human subsystem, is often overlooked or considered as having "no obvious connection" to safety. To explore the relationship between handedness and safety, this study proposed three hypotheses and conducted a series of questionnaires, experiments, and statistical analyses around them. This research system is considered a method that can accurately reflect the relationship between handedness and system safety. The results showed that left-handed testers had excellent operational and correct capture abilities in the predetermined safety scenario. Individual factors did not affect this advantage, and the advantage even expanded with the increase of individual factor scores. In addition, when considering the palm travel angle α and arm extension direction β, the characterization phenomenon of handedness showed incomplete symmetry. However, regardless of how α and β changed, the overall performance of left-handed people was still better than that of right-handed people. This further proves that left-handed operators have better accident prevention and control capabilities for accidents themselves, and this advantage makes the system closer to inherent safety. For a specific operating position (train driver), we found that left-handed drivers performed better than right-handed drivers in braking time (83.6ms ahead of braking) and emergency braking error rate (decreased by 7.7‰), indirectly verifying the unique advantage of left-handed manipulators in accident prevention or control. This study proves that handedness can become a new influencing factor of HCI safety and verifies its importance and criticality as an evaluation criterion, which establishes a bridge between handedness and safety.
- 16 July 2025
- Published by MDPI AG in Preprints.org
Open AccessHandedness and Handling Safety: Exploring the Representation of Handedness in Emergency Human-Computer Interaction
Handedness, as an inherent characteristic in the human subsystem, is often overlooked or considered as having "no obvious connection" to safety. To explore the relationship between handedness and safety, this study proposed three hypotheses and conducted a series of questionnaires, experiments, and statistical analyses around them. This research system is considered a method that can accurately reflect the relationship between handedness and system safety. The results showed that left-handed testers had excellent operational and correct capture abilities in the predetermined safety scenario. Individual factors did not affect this advantage, and the advantage even expanded with the increase of individual factor scores. In addition, when considering the palm travel angle α and arm extension direction β, the characterization phenomenon of handedness showed incomplete symmetry. However, regardless of how α and β changed, the overall performance of left-handed people was still better than that of right-handed people. This further proves that left-handed operators have better accident prevention and control capabilities for accidents themselves, and this advantage makes the system closer to inherent safety. For a specific operating position (train driver), we found that left-handed drivers performed better than right-handed drivers in braking time (83.6ms ahead of braking) and emergency braking error rate (decreased by 7.7‰), indirectly verifying the unique advantage of left-handed manipulators in accident prevention or control. This study proves that handedness can become a new influencing factor of HCI safety and verifies its importance and criticality as an evaluation criterion, which establishes a bridge between handedness and safety.
- Open Access
Sensitivity Analysis and Optimization of Urban Roundabout Road Design Parameters Based on CFD
With the rapid advancement of urbanization, urban transportation systems are facing increasingly severe congestion challenges, especially at traditional roundabouts. The rapid increase in vehicles has led to a sharp increase in pressure at roundabouts. In order to alleviate the traffic pressure in the roundabout, this paper changes the road design parameters of the roundabout, uses a CFD method combined with sensitivity analysis to study the influence of different inlet angles, lane numbers, and the outer radius on the pressure, and seeks the road design parameter scheme with the optimal mitigation effect. Firstly, the full factorial experimental design method is used to select the sample points in the design sample space, and the response values of each sample matrix are obtained by CFD. Secondly, the response surface model between the road design parameters of the roundabout and the pressure in the ring is constructed. The single-factor analysis method and the multi-factor analysis method are used to analyze the influence of the road parameters on the pressure of each feature point, and then the moment-independent sensitivity analysis method based on the response surface model is used to solve the sensitivity distribution characteristics of the road design parameters of the roundabout. Finally, the Kriging surrogate model is constructed, and the NSGA-II is used to solve the multi-objective optimization problem to obtain the optimal solution set of road parameters. The results show that there are significant differences in the mechanism of action of different road geometric parameters on the pressure of each feature point of the roundabout, and it shows obvious spatial heterogeneity of parameter sensitivity. The pressure changes in the two feature points at the entrance conflict area and the inner ring weaving area are significantly correlated with the lane number parameters. There is a strong coupling relationship between the pressure of the maximum pressure extreme point in the ring and the radius parameters of the outer ring. According to the optimal scheme of road parameters, that is, when the parameter set (inlet angle/°, number of lanes, outer radius/m) meets (35.4, 5, 65), the pressures of the feature points decrease by 34.1%, 38.3%, and 20.7%, respectively, which has a significant effect on alleviating the pressure in the intersection. This study optimizes the geometric parameters of roundabouts through multidisciplinary methods, provides a data-driven congestion reduction strategy for the urban sustainable development framework, and significantly improves road traffic efficiency, which is crucial for building an efficient traffic network and promoting urban sustainable development.
Open AccessSensitivity Analysis and Optimization of Urban Roundabout Road Design Parameters Based on CFD
With the rapid advancement of urbanization, urban transportation systems are facing increasingly severe congestion challenges, especially at traditional roundabouts. The rapid increase in vehicles has led to a sharp increase in pressure at roundabouts. In order to alleviate the traffic pressure in the roundabout, this paper changes the road design parameters of the roundabout, uses a CFD method combined with sensitivity analysis to study the influence of different inlet angles, lane numbers, and the outer radius on the pressure, and seeks the road design parameter scheme with the optimal mitigation effect. Firstly, the full factorial experimental design method is used to select the sample points in the design sample space, and the response values of each sample matrix are obtained by CFD. Secondly, the response surface model between the road design parameters of the roundabout and the pressure in the ring is constructed. The single-factor analysis method and the multi-factor analysis method are used to analyze the influence of the road parameters on the pressure of each feature point, and then the moment-independent sensitivity analysis method based on the response surface model is used to solve the sensitivity distribution characteristics of the road design parameters of the roundabout. Finally, the Kriging surrogate model is constructed, and the NSGA-II is used to solve the multi-objective optimization problem to obtain the optimal solution set of road parameters. The results show that there are significant differences in the mechanism of action of different road geometric parameters on the pressure of each feature point of the roundabout, and it shows obvious spatial heterogeneity of parameter sensitivity. The pressure changes in the two feature points at the entrance conflict area and the inner ring weaving area are significantly correlated with the lane number parameters. There is a strong coupling relationship between the pressure of the maximum pressure extreme point in the ring and the radius parameters of the outer ring. According to the optimal scheme of road parameters, that is, when the parameter set (inlet angle/°, number of lanes, outer radius/m) meets (35.4, 5, 65), the pressures of the feature points decrease by 34.1%, 38.3%, and 20.7%, respectively, which has a significant effect on alleviating the pressure in the intersection. This study optimizes the geometric parameters of roundabouts through multidisciplinary methods, provides a data-driven congestion reduction strategy for the urban sustainable development framework, and significantly improves road traffic efficiency, which is crucial for building an efficient traffic network and promoting urban sustainable development.
- Open Access
- 11 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (12) , 5402
Time-Varying Reliability Assessment of Urban Traffic Network Based on Dynamic Bayesian Network
With the advancement of urbanization and the proposal of sustainable development goals, the complexity and vulnerability of urban transportation systems have become increasingly prominent, and their reliability is directly related to the sustainable operation of urban transportation. The reliability of urban road networks, characterized by their dynamic nature, multi-scale characteristics, and anti-interference capabilities, directly restricts the functional guarantee of urban traffic and the efficiency of emergency response. To address the limitations of existing road network connectivity reliability assessment methods in representing time dynamics and modeling failure correlation, this study proposes a road network reliability assessment method based on a Dynamic Bayesian Network (DBN) by constructing a probabilistic reasoning model that integrates cascading failure characteristics. First, the connectivity reliability of the road network under random and targeted attack strategies was evaluated using a Monte Carlo simulation, revealing the impact of different attack strategies on network reliability. Subsequently, the congestion delay index is used as the standard of road section failure, considering the failure distribution and mutual dependence of road sections over time, a cascade failure mechanism is introduced, and a time-varying reliability assessment model based on a DBN is constructed. The effectiveness of the proposed method was verified through a case study of a partial road network in Dalian. The results show that ignoring cascading effects can significantly overestimate the reliability of the road network, especially during peak traffic hours, where such deviations may mask the real paralysis risks of the network. In contrast, the method proposed in this study fully considers time dynamics and failure correlation and can better capture the reliability of the road network under various dynamic conditions, providing a scientific basis for the sustainable planning and emergency management of urban traffic systems.
- 11 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (12) , 5402
Open AccessTime-Varying Reliability Assessment of Urban Traffic Network Based on Dynamic Bayesian Network
With the advancement of urbanization and the proposal of sustainable development goals, the complexity and vulnerability of urban transportation systems have become increasingly prominent, and their reliability is directly related to the sustainable operation of urban transportation. The reliability of urban road networks, characterized by their dynamic nature, multi-scale characteristics, and anti-interference capabilities, directly restricts the functional guarantee of urban traffic and the efficiency of emergency response. To address the limitations of existing road network connectivity reliability assessment methods in representing time dynamics and modeling failure correlation, this study proposes a road network reliability assessment method based on a Dynamic Bayesian Network (DBN) by constructing a probabilistic reasoning model that integrates cascading failure characteristics. First, the connectivity reliability of the road network under random and targeted attack strategies was evaluated using a Monte Carlo simulation, revealing the impact of different attack strategies on network reliability. Subsequently, the congestion delay index is used as the standard of road section failure, considering the failure distribution and mutual dependence of road sections over time, a cascade failure mechanism is introduced, and a time-varying reliability assessment model based on a DBN is constructed. The effectiveness of the proposed method was verified through a case study of a partial road network in Dalian. The results show that ignoring cascading effects can significantly overestimate the reliability of the road network, especially during peak traffic hours, where such deviations may mask the real paralysis risks of the network. In contrast, the method proposed in this study fully considers time dynamics and failure correlation and can better capture the reliability of the road network under various dynamic conditions, providing a scientific basis for the sustainable planning and emergency management of urban traffic systems.
- Open Access
- 26 May 2025
- Published by MDPI AG in Preprints.org
Sensitivity Analysis and Optimization of Urban Roundabout Road Design Parameters Based on CFD
With the rapid advancement of urbanization, urban transportation systems are facing increasingly severe congestion challenges, especially at traditional roundabouts. The rapid increase in vehicles has led to a sharp increase in pressure at roundabouts. In order to alleviate the traffic pressure in the roundabout, this paper changes the road design parameters of the roundabout, uses CFD method combined with sensitivity analysis to study the influence of different inlet angles, lane numbers and outer radius on the pressure, and seeks the road design parameter scheme with the optimal mitigation effect. Firstly, the full factorial experimental design method is used to select the sample points in the design sample space, and the response values of each sample matrix are obtained by CFD. Secondly, the response surface model between the road design parameters of the roundabout and the pressure in the ring is constructed. The single factor analysis method and the multi-factor analysis method are used to analyze the influence of the road parameters on the pressure of each feature point, and then the moment independent sensitivity analysis method based on the response surface model is used to solve the sensitivity distribution characteristics of the road design parameters of the roundabout. Finally, the Kriging surrogate model is constructed, and the NSGA-II is used to solve the multi-objective optimization problem to obtain the optimal solution set of road parameters. The results show that there are significant differences in the mechanism of action of different road geometric parameters on the pressure of each feature point of the roundabout, and it shows obvious spatial heterogeneity of parameter sensitivity. The pressure changes of the two feature points at the entrance conflict area and the inner ring weaving area are significantly correlated with the lane number parameters. There is a strong coupling relationship between the pressure of the maximum pressure extreme point in the ring and the radius parameters of the outer ring. According to the optimal scheme of road parameters, that is, when the parameter set (inlet angle/°, number of lanes, outer radius/ m) meets (35.4, 5, 65), the pressure of feature points decreases by 34.1%, 38.3% and 20.7% respectively, which has a significant effect on alleviating the pressure in the intersection. This study optimizes the geometric parameters of roundabouts through multidisciplinary methods, provides a data-driven congestion reduction strategy for the urban sustainable development framework, and significantly improves road traffic efficiency, which is crucial for building an efficient traffic network and promoting urban sustainable development.
- 26 May 2025
- Published by MDPI AG in Preprints.org
Open AccessSensitivity Analysis and Optimization of Urban Roundabout Road Design Parameters Based on CFD
With the rapid advancement of urbanization, urban transportation systems are facing increasingly severe congestion challenges, especially at traditional roundabouts. The rapid increase in vehicles has led to a sharp increase in pressure at roundabouts. In order to alleviate the traffic pressure in the roundabout, this paper changes the road design parameters of the roundabout, uses CFD method combined with sensitivity analysis to study the influence of different inlet angles, lane numbers and outer radius on the pressure, and seeks the road design parameter scheme with the optimal mitigation effect. Firstly, the full factorial experimental design method is used to select the sample points in the design sample space, and the response values of each sample matrix are obtained by CFD. Secondly, the response surface model between the road design parameters of the roundabout and the pressure in the ring is constructed. The single factor analysis method and the multi-factor analysis method are used to analyze the influence of the road parameters on the pressure of each feature point, and then the moment independent sensitivity analysis method based on the response surface model is used to solve the sensitivity distribution characteristics of the road design parameters of the roundabout. Finally, the Kriging surrogate model is constructed, and the NSGA-II is used to solve the multi-objective optimization problem to obtain the optimal solution set of road parameters. The results show that there are significant differences in the mechanism of action of different road geometric parameters on the pressure of each feature point of the roundabout, and it shows obvious spatial heterogeneity of parameter sensitivity. The pressure changes of the two feature points at the entrance conflict area and the inner ring weaving area are significantly correlated with the lane number parameters. There is a strong coupling relationship between the pressure of the maximum pressure extreme point in the ring and the radius parameters of the outer ring. According to the optimal scheme of road parameters, that is, when the parameter set (inlet angle/°, number of lanes, outer radius/ m) meets (35.4, 5, 65), the pressure of feature points decreases by 34.1%, 38.3% and 20.7% respectively, which has a significant effect on alleviating the pressure in the intersection. This study optimizes the geometric parameters of roundabouts through multidisciplinary methods, provides a data-driven congestion reduction strategy for the urban sustainable development framework, and significantly improves road traffic efficiency, which is crucial for building an efficient traffic network and promoting urban sustainable development.
- Open Access
- 30 April 2025
- Published by MDPI AG in Preprints.org
Time-Varying Reliability Assessment of Urban Traffic Network Based on Dynamic Bayesian Network
With the advancement of urbanization, the complexity and fragility of urban traffic systems are becoming increasingly prominent. The reliability of urban road networks, characterized by their dynamic nature, multi-scale characteristics, and anti-interference capabilities, directly restricts the functional guarantee of urban traffic and the efficiency of emergency response. To address the limitations of existing road network connectivity reliability assessment methods in representing time dynamics and modeling failure correlation, this study proposes a road network reliability assessment method based on Dynamic Bayesian Network (DBN) by constructing a probabilistic reasoning model that integrates cascading failure characteristics. First, the connectivity reliability of the road network under random and targeted attack strategies was evaluated using Monte Carlo Simulation (MCS), revealing the impact of different attack strategies on network reliability. Subsequently, considering the time-dependent failure distribution of road sections and their interdependencies, a cascading failure mechanism was introduced to build a time-varying reliability assessment model based on DBN. The effectiveness of the proposed method was verified through a case study of a partial road network in Dalian. The results show that ignoring cascading effects can significantly overestimate the reliability of the road network, especially during peak traffic hours, where such deviations may mask the real paralysis risks of the network. In contrast, the method proposed in this study fully considers time dynamics and failure correlation, and can better capture the reliability of the road network under various dynamic conditions, providing a scientific basis for the resilience planning and emergency management of urban traffic systems.
- 30 April 2025
- Published by MDPI AG in Preprints.org
Open AccessTime-Varying Reliability Assessment of Urban Traffic Network Based on Dynamic Bayesian Network
With the advancement of urbanization, the complexity and fragility of urban traffic systems are becoming increasingly prominent. The reliability of urban road networks, characterized by their dynamic nature, multi-scale characteristics, and anti-interference capabilities, directly restricts the functional guarantee of urban traffic and the efficiency of emergency response. To address the limitations of existing road network connectivity reliability assessment methods in representing time dynamics and modeling failure correlation, this study proposes a road network reliability assessment method based on Dynamic Bayesian Network (DBN) by constructing a probabilistic reasoning model that integrates cascading failure characteristics. First, the connectivity reliability of the road network under random and targeted attack strategies was evaluated using Monte Carlo Simulation (MCS), revealing the impact of different attack strategies on network reliability. Subsequently, considering the time-dependent failure distribution of road sections and their interdependencies, a cascading failure mechanism was introduced to build a time-varying reliability assessment model based on DBN. The effectiveness of the proposed method was verified through a case study of a partial road network in Dalian. The results show that ignoring cascading effects can significantly overestimate the reliability of the road network, especially during peak traffic hours, where such deviations may mask the real paralysis risks of the network. In contrast, the method proposed in this study fully considers time dynamics and failure correlation, and can better capture the reliability of the road network under various dynamic conditions, providing a scientific basis for the resilience planning and emergency management of urban traffic systems.