Robert W. Smith

Bilateral (BL) and unilateral (UL) muscle actions are commonly incorporated in training programs to achieve distinct goals, however, the mechanisms driving modality-specific training adaptations remain unclear. This study examined peak force, electromyographic (EMG) amplitude (AMP), and mean power frequency (MPF) of the non-dominant leg during isokinetic leg extensions performed as either a BL or BLUL combined modality. Twelve recreationally trained men (Mean ± SD; age = 20.8 ± 1.7 years; weight = 83.1 ± 15.7 kg; height = 178.2 ± 7.8 cm) attended 2 test visits that included BL and UL maximal isokinetic leg extensions at 180°·s⁻¹ followed by a fatiguing task of either 50 BL or 25 BL followed immediately by 25 UL (BLUL) maximal, isokinetic leg extensions at 180°·s⁻¹, in random order on separate days. The results demonstrated a 33.3% decline in peak force with a concomitant increase in EMG AMP across the fatiguing task, but there were no significant differences between conditions. For EMG MPF, the BLUL condition exhibited a 19.39% decline versus a 10.97% decline in the BL condition. Overall, the present study suggested there were no significant differences in neuromuscular activation strategies between the tested modalities. However, our findings indicated that incorporating UL muscle actions after a BL task may induce a greater degree of peripheral fatigue compared to sustained BL muscle actions. Practitioners might consider implementing UL exercises at the end of a training bout to induce greater metabolic stress.

Background/Objectives: Studies of the effects of anchor schemes (perceived intensity vs. relative intensity) on muscular performance have reported mixed findings. Therefore, the present study examined the effects of different anchor schemes on time-to-task failure (TTF), muscular performance, neuromuscular responses, and potentiated twitch torque (PTT). Methods: On separate days, 15 men (age = 21.5 ± 2.3 yrs) performed forearm flexion maximal voluntary isometric contractions (MVICs) before and after sustained tasks anchored to a rating of perceived exertion of 6 (RPEFT) and with the torque at RPE = 6 (TRQFT). Electromyographic amplitude (EMG AMP) and mean power frequency (EMG MPF) were recorded from the biceps brachii (BB). Supramaximal stimuli were delivered to the motor nerve of the BB following the MVICs to quantify the PTT. Repeated measures ANOVAs assessed the mean differences between anchor schemes for MVIC, neuromuscular, and PTT responses. Paired t-tests compared the magnitude of percent changes for the dependent variables. Results: The TTF for the RPEFT was longer (p < 0.001) than the TRQFT, but the MVIC decreased similarly (12.7 ± 9.5% vs. 20.3 ± 7.9%, p = 0.054). Electromyographic AMP did not change (p = 0.288), while EMG MPF decreased (15.7 ± 10.2%, p < 0.011) for the TRQFT only. Mean decreases in PTT were comparable for both tasks (p < 0.003), although the percent change was greater for the TRQFT (49.6 ± 16.1%, p < 0.001). Conclusions: The differences in TTF, but similar decreases in MVIC suggested that participants reached a sensory tolerance limit. Based on EMG MPF and PTT, the TRQFT caused greater peripheral perturbations to contractile function than the RPEFT.

This study examined the effects of sustained, isometric forearm flexion tasks anchored to ratings of perceived exertion of 2 (RPE2_FT) and 8 (RPE8_FT) on the patterns of fatigue-induced changes in torque and neuromuscular responses, time to task failure (TTF), performance fatigability (% decline in maximal voluntary isometric contraction [MVIC]), and perceived factors that contributed to task termination. Twelve men (mean ± SD: age = 20.9 ± 2.2 yrs) performed MVICs before and after the tasks and completed post-test questionnaires (PTQ). Data were analyzed using polynomial regression analyses, dependent t-tests, Spearman’s rank order correlations, and Wilcoxon signed rank tests. The RPE8_FT had greater (p < 0.001) performance fatigability than the RPE2_FT, despite no difference (p > 0.05) in TTF. During both tasks, there were significant (p ≤ 0.05) composite linear decreases for torque, electromyographic amplitude, and neuromuscular efficiency, and substantial individual variability in the neuromuscular responses. There were no significant (p > 0.05) associations among the perceived factors and TTF or performance fatigability. Thus, there were RPE-specific differences in performance fatigability, but not TTF or the composite patterns of changes in torque and neuromuscular responses. In addition, in most cases, the individual neuromuscular, but not torque, patterns of responses were RPE-specific. Furthermore, the perceived factors assessed by the PTQ were not related to TTF or performance fatigability.

Purpose The present study examined the effects of sustained, isometric low- versus high-intensity tasks on time to task failure (TTF), performance fatigability (PF), ratings of perceived exertion (RPE), and the perceived causes of task termination from a post-test questionnaire (PTQ). Methods Ten men (mean ± SD: age = 21.1 ± 2.3 years; height = 180.2 ± 5.7 cm; body mass = 79.5 ± 8.8 kg) performed maximal voluntary isometric contractions (MVICs) before and after fatiguing, isometric forearm flexion tasks anchored to the torque corresponding to RPE values of 2 (TRQ2FT = 23.8 ± 7.1 N·m) and 8 (TRQ8FT = 60.9 ± 11.4 N·m). In addition, the subjects completed a PTQ which surveyed whether the perceived sensations of fatigue or pain, and/or the psychological factors of loss of focus and motivation contributed to the decision to terminate the task. Repeated measures ANOVAs, Wilcoxon-Signed Rank tests, and Spearman’s Rank-Order Correlations were used to analyze the data. Results Across the fatiguing tasks, there were similar decreases in MVIC torque (95.2 ± 20.3 vs. 68.9 ± 15.6 N·m; p < 0.001) and RPE values (p = 0.122) at task failure for TRQ2FT (7.4 ± 2.7) and TRQ8FT (8.9 ± 1.0), but a longer (p = 0.005) TTF for the TRQ2FT (245.0 ± 177.0 s) than TRQ8FT (36.8 ± 11.1 s). Conclusions Despite reaching task failure, the subjects were able to perform MVICs that were 100–300% greater than the target torque values within seconds of terminating the tasks. Thus, we hypothesized that task failure was not caused by an inability to produce sufficient torque to sustain the tasks, but rather an unwillingness to continue the task.

This study examined the effects of joint angle (JA) on maximal voluntary isometric contraction (MVIC) and neuromuscular responses following fatiguing tasks anchored to RPE. Nine men (mean ± SD: age = 20.7 ± 1.2 yrs) performed forearm flexion MVICs at elbow JAs of 75° and 125° before and after sustained, isometric forearm flexion tasks to failure at fatiguing joint angles (FJA) of 75° and 125° anchored to RPE = 8. The amplitude and frequency of the electromyographic and mechanomyographic signals were recorded. Neuromuscular efficiency was calculated by dividing normalized torque by normalized electromyographic amplitude. A dependent t-test was used to assess the mean difference for time to task failure (TTF) between FJA. Repeated measure ANOVAs were used to assess mean differences for pre-test to post-test MVIC and neuromuscular responses. There was no significant difference between FJA for TTF (p = 0.223). The MVIC (collapsed across FJA and MVIC JA) decreased from pre-test to post-test (51.1 ± 5.0 vs. 45.3 ± 5.6 Nm, p < 0.001). Normalized neuromuscular parameters remained unchanged (p > 0.05). The FJA resulted in similar torque and neuromuscular responses, and the decreases in MVIC were not tracked by changes in the neuromuscular parameters. Thus, the neuromuscular parameters were not sensitive to fatigue, and pre-test to post-test measures may be compared between different FJA.

The present study examined the effect of anchor schemes on the time to task failure (TTF), performance fatigability, neuromuscular responses, and the perceived sensations that contributed to task termination following the sustained, isometric forearm flexion tasks. Eight women completed sustained, isometric forearm flexion tasks anchored to RPE = 8 (RPEFT) and the torque (TRQFT) that corresponded to RPE = 8. The subjects performed pre-test and post-test maximal isometric contractions to quantify performance fatigability and changes in electromyographic amplitude (EMG AMP) and neuromuscular efficiency (NME). In addition, the subjects completed a post-test questionnaire (PTQ) to quantify the contributions of perceived sensations to task termination. Repeated measure ANOVAs were used to assess the mean differences for TTF, performance fatigability, and neuromuscular responses. Wilcoxon Signed Rank Tests were used to assess the differences between anchor schemes for the average values from the PTQ item scores. For TTF, the RPEFT was longer than the TRQFT (174.9 ± 85.6 vs. 65.6 ± 68.0 s; p = 0.006). Collapsed across the anchor scheme, there were decreases in torque (23.7 ± 5.5 Nm vs. 19.6 ± 4.9 Nm; p < 0.001) and NME (1.00 ± 0.00 vs. 0.76 ± 0.15; p = 0.003). There were no significant (p > 0.577) changes for EMG AMP. For the PTQ, there were no differences (p > 0.05) between anchor schemes. There were, however, inter-individual differences in the response scores. The current findings indicated that performance fatigability was likely due to peripheral fatigue (based on NME), not central fatigue (based on EMG AMP). Furthermore, the use of a PTQ may serve as a simple tool to assess the contributions of perceived sensations to task termination.

Purpose The purpose of the present study was to examine the interactions between perceived fatigability and performance fatigability in women and men by utilizing the RPE-Clamp model to assess the fatigue-induced effects of a sustained, isometric forearm flexion task anchored to RPE = 8 on time to task failure (TTF), torque, and neuromuscular responses. Methods Twenty adults (10 men and 10 women) performed two, 3 s forearm flexion maximal voluntary isometric contractions (MVICs) followed by a sustained, isometric forearm flexion task anchored to RPE = 8 using the OMNI-RES (0–10) scale at an elbow joint angle of 100°. Electromyographic amplitude (EMG AMP) was recorded from the biceps brachii. Torque and EMG AMP values resulting from the sustained task were normalized to the pretest MVIC. Neuromuscular efficiency was defined as NME = normalized torque/normalized EMG AMP. Mixed factorial ANOVAs and Bonferroni corrected dependent t tests and independent t tests were used to examine differences across time and between sex for torque and neuromuscular parameters. Results There were no differences between the women and men for the fatigue-induced decreases in torque, EMG AMP, or NME, and the mean decreases (collapsed across sex) were 50.3 ± 8.6 to 2.8 ± 2.9% MVIC, 54.7 ± 12.0 to 19.6 ± 5.3% MVIC, and 0.94 ± 0.19 to 0.34 ± 0.16, respectively. Furthermore, there were no differences between the women and men for TTF (251.8 ± 74.1 vs. 258.7 ± 77.9 s). Conclusion The results suggested that the voluntary reductions in torque to maintain RPE and the decreases in NME were likely due to group III/IV afferent feedback from peripheral fatigue that resulted in excitation–contraction coupling failure.

Smith, RW, Housh, TJ, Anders, JPV, Neltner, TJ, Arnett, JE, Schmidt, RJ, and Johnson, GO. Application of the ratings of perceived exertion-clamp model to examine the effects of joint angle on the time course of torque and neuromuscular responses during a sustained, isometric forearm flexion to task failure. J Strength Cond Res 37(5): 1023–1033, 2023—The present study used the ratings of perceived exertion (RPE)-clamp model during a sustained, isometric forearm flexion task to failure to determine the effects of joint angle on torque and neuromuscular responses. Twelve college-aged women performed two 3-second maximal voluntary isometric contractions at elbow joint angles (EJ) of 75°, 100°, and 125° before sustained, isometric, forearm flexions anchored to RPE = 7 to task failure (defined as RPE > 7, or the torque was reduced to zero) at EJ₇₅, EJ₁₀₀, and EJ₁₂₅. The amplitude (AMP) and frequency (MPF) of the electromyographic (EMG) and mechanomyographic (MMG) signals from the biceps brachii were recorded. Repeated-measures ANOVAs and post hoc comparisons were used to examine differences across time and between joint angles for torque and neuromuscular parameters. A p-value ≤0.05 was considered significant. For each joint angle, there was a decrease (p < 0.05) in torque across the sustained, isometric task. Collapsed across joint angle, there were decreases (p < 0.001, = 0.378) in EMG AMP from 30 to 100% time to task failure. No changes were observed, however, for the other neuromuscular responses. The subjects voluntarily reduced torque to maintain RPE = 7 for each joint angle, and we hypothesize that RPE was maintained by afferent feedback from group III/IV motor neurons and corollary discharge (efferent copy of an internal signal that develops from central motor commands). The RPE-Clamp Model may be extended to athletes recovering from injury because a self-selected exercise intensity may be perceived as more enjoyable and promote adherence.