Oliver Seffer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Oliver Seffer has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Stefan Kaierle
Laser Zentrum Hannover e.V.
9 shared publications - Jörg Hermsdorf
Laser Zentrum Hannover e.V.
8 shared publications - Sarah Nothdurft
Laser Zentrum Hannover e.V. , Hollerithallee 8, Hannover 30419, Germany
4 shared publications - Rabi Lahdo
Laser Zentrum Hannover e.V. 1 , Hollerithallee 8, Hannover 30419
3 shared publications Sarah Seffer
Laser Zentrum Hannover e.V. 1 , Hollerithallee 8, Hannover 30419
3 shared publications- Ludger Overmeyer
Institute of Transport and Automation Technology, Leibniz University Hannover, Garbsen, Germany
2 shared publications
Latest Publications
- 2 August 2026
- Published by Springer Nature
- p. 2039-2076
Laser Innovations for Space: System Development and Utilization
- 2 August 2026
- Published by Springer Nature
- p. 2039-2076
Laser Innovations for Space: System Development and Utilization
- 2 December 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 38 (1)
Investigations on high-power laser beam welding of adapters for joining steel and aluminum for thick-walled applications in shipbuilding
In shipbuilding, thick dissimilar joints of steel and aluminum are in great demand to reduce the weight and the center of gravity of the ship. On the one hand, the dissimilar joints lead to a reduction in CO2-emissions as result of lower fuel consumption and on the other hand to a higher ship stability. The joining process used for manufacturing ships employs an explosive welded adapter to join both dissimilar parts. However, the production of these adapters is complex, time-consuming, and costly. Furthermore, these adapters have an oversized thickness, depending on the material thickness of the steel and the aluminum alloy, in order to achieve the required seam strength. There is a high interest for an efficient alternative. In this study, high-power laser beam welding processes are developed for joining steel S355 (thickness t = 5 mm) with aluminum alloy AA6082 (t = 12 mm) in lap configuration with two intersecting laser beams and additional material to increase weld seam quality. Within this framework, two laser beam sources with a max. output power of PL = 6 kW are used to weld dissimilar joints with additional material filled groove. In the course of the welding process development, the influence of the parameters regarding the groove depth on the metallurgical and mechanical properties is investigated. Adequate process parameters are transferred to laser beam welding of adapters. The adapters are characterized, for example, by using metallographic analysis as well as tensile tests under symmetrical and asymmetrical loading. A result is that the adapters reach a max. tensile force of approximately 35 kN and the break occurs outside of the dissimilar joints. The results increase the application potential of laser beam welded dissimilar joints in the field of shipbuilding.
- 2 December 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 38 (1)
Investigations on high-power laser beam welding of adapters for joining steel and aluminum for thick-walled applications in shipbuilding
In shipbuilding, thick dissimilar joints of steel and aluminum are in great demand to reduce the weight and the center of gravity of the ship. On the one hand, the dissimilar joints lead to a reduction in CO2-emissions as result of lower fuel consumption and on the other hand to a higher ship stability. The joining process used for manufacturing ships employs an explosive welded adapter to join both dissimilar parts. However, the production of these adapters is complex, time-consuming, and costly. Furthermore, these adapters have an oversized thickness, depending on the material thickness of the steel and the aluminum alloy, in order to achieve the required seam strength. There is a high interest for an efficient alternative. In this study, high-power laser beam welding processes are developed for joining steel S355 (thickness t = 5 mm) with aluminum alloy AA6082 (t = 12 mm) in lap configuration with two intersecting laser beams and additional material to increase weld seam quality. Within this framework, two laser beam sources with a max. output power of PL = 6 kW are used to weld dissimilar joints with additional material filled groove. In the course of the welding process development, the influence of the parameters regarding the groove depth on the metallurgical and mechanical properties is investigated. Adequate process parameters are transferred to laser beam welding of adapters. The adapters are characterized, for example, by using metallographic analysis as well as tensile tests under symmetrical and asymmetrical loading. A result is that the adapters reach a max. tensile force of approximately 35 kN and the break occurs outside of the dissimilar joints. The results increase the application potential of laser beam welded dissimilar joints in the field of shipbuilding.
- 7 April 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 37 (2)
In-process control of penetration depth for welding of dissimilar joints of steel and aluminum with two intersecting laser beams
Dissimilar joints of steel and aluminum are in great demand in shipbuilding applications, such as connecting steel hulls to aluminum superstructures. For this welding application, an explosive-welded adapter is used, whose manufacturing is complex and cost-intensive. While searching for alternative welding processes, laser beam welding has emerged due to its specific advantages. Compared to other fusion joining processes, laser beam welding enables a better control of the weld metal mixing ratio and, thus, the microstructure. To achieve a constant weld metal mixing ratio and, thus, a homogeneous microstructure over the weld seam length, an in-process control of the penetration depth based on the analysis of spectral process emissions for lap welding of steel S355 (t = 5 mm) and aluminum alloy AA6062 (t = 12 mm) with two intersecting laser beams is developed in these investigations. The main result of using the process control is that the microstructure and the joint strength remain almost constant, despite varying welding speeds.
- 7 April 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 37 (2)
In-process control of penetration depth for welding of dissimilar joints of steel and aluminum with two intersecting laser beams
Dissimilar joints of steel and aluminum are in great demand in shipbuilding applications, such as connecting steel hulls to aluminum superstructures. For this welding application, an explosive-welded adapter is used, whose manufacturing is complex and cost-intensive. While searching for alternative welding processes, laser beam welding has emerged due to its specific advantages. Compared to other fusion joining processes, laser beam welding enables a better control of the weld metal mixing ratio and, thus, the microstructure. To achieve a constant weld metal mixing ratio and, thus, a homogeneous microstructure over the weld seam length, an in-process control of the penetration depth based on the analysis of spectral process emissions for lap welding of steel S355 (t = 5 mm) and aluminum alloy AA6062 (t = 12 mm) with two intersecting laser beams is developed in these investigations. The main result of using the process control is that the microstructure and the joint strength remain almost constant, despite varying welding speeds.
- 29 October 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (4)
Investigations on opportunities and challenges of brilliant high-power laser beam welding with 24 kW and adjustable power distribution for different materials
Solid-state laser beam sources offer the possibility of generating high-brilliance laser beams with low expansion and high usable intensity at the focal point. New approaches include beam shaping with the use of core and ring fiber and, therefore, variable power distribution in the laser beam focal point and material interaction area. Particularly, high-power laser beam welding benefits from beam shaping because of the stabilizing effect on the weld pool. Furthermore, the technical progress achieved with regard to beam quality also allows one to achieve high Rayleigh lengths and, therefore, a more uniform beam diameter over the whole material thickness. In this study, investigations on high-power laser beam welding with a 24 kW disk laser beam source are conducted for three different materials (mild steel, aluminum alloy, and copper), which are of high interest for welding in different sectors. The influence of power distribution between the core and the ring as well as welding speed on weld geometry (depth and width), weld pool stability, and the resulting weld seam quality is investigated. It is shown that the welding process cannot just be scaled up in comparison with welding with lower laser beam power but has its own challenges. It is possible that high welding depths (12 mm for copper, more than 12 mm is possible for aluminum, and 25 mm for mild steel) could be achieved in one pass. To achieve this, aluminum needs the lowest energy per unit length per mm of sheet thickness and copper the highest.
- 29 October 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (4)
Investigations on opportunities and challenges of brilliant high-power laser beam welding with 24 kW and adjustable power distribution for different materials
Solid-state laser beam sources offer the possibility of generating high-brilliance laser beams with low expansion and high usable intensity at the focal point. New approaches include beam shaping with the use of core and ring fiber and, therefore, variable power distribution in the laser beam focal point and material interaction area. Particularly, high-power laser beam welding benefits from beam shaping because of the stabilizing effect on the weld pool. Furthermore, the technical progress achieved with regard to beam quality also allows one to achieve high Rayleigh lengths and, therefore, a more uniform beam diameter over the whole material thickness. In this study, investigations on high-power laser beam welding with a 24 kW disk laser beam source are conducted for three different materials (mild steel, aluminum alloy, and copper), which are of high interest for welding in different sectors. The influence of power distribution between the core and the ring as well as welding speed on weld geometry (depth and width), weld pool stability, and the resulting weld seam quality is investigated. It is shown that the welding process cannot just be scaled up in comparison with welding with lower laser beam power but has its own challenges. It is possible that high welding depths (12 mm for copper, more than 12 mm is possible for aluminum, and 25 mm for mild steel) could be achieved in one pass. To achieve this, aluminum needs the lowest energy per unit length per mm of sheet thickness and copper the highest.
- Open Access
- 19 October 2023
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (4)
Investigations on laser beam welding of thin aluminum foils with additional filler wire
Nowadays, battery-electric drives and energy storage are elected to be the future technologies. In the manufacturing of parts for electric applications, laser beam welding is an appropriate and favorable welding method. The characteristics of high welding speed, local heat input, and the contact-free process allow efficient and automatable processes. For electrodes, mainly copper and aluminum are used. Many foils with thicknesses of an area of 10 μm have to be connected to create battery cells. Different than expected, aluminum is a more challenging material to produce than others. Pore formation is also extended in aluminum due to the presence of air between the foils. The connecting cross section is thereby reduced. Furthermore, there is detachment in the fusion area and a high weld seam undercut. In addition to insufficient clamping, a lack of material reduces strength and, thus, usability. In the research presented here, the use of aluminum filler wire (AA 1050A) and shielding gas are investigated for the application of welding 40 aluminum foils (AA 1050A) with a thickness of 15 μm to an aluminum sheet with a thickness of 2 mm using infrared laser beam wavelength. The aims of the process development are welds with high connection widths and high quality as well as reproducibility to provide excellent mechanical properties and the highest electrical conductivity.
- 19 October 2023
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (4)
Open AccessInvestigations on laser beam welding of thin aluminum foils with additional filler wire
Nowadays, battery-electric drives and energy storage are elected to be the future technologies. In the manufacturing of parts for electric applications, laser beam welding is an appropriate and favorable welding method. The characteristics of high welding speed, local heat input, and the contact-free process allow efficient and automatable processes. For electrodes, mainly copper and aluminum are used. Many foils with thicknesses of an area of 10 μm have to be connected to create battery cells. Different than expected, aluminum is a more challenging material to produce than others. Pore formation is also extended in aluminum due to the presence of air between the foils. The connecting cross section is thereby reduced. Furthermore, there is detachment in the fusion area and a high weld seam undercut. In addition to insufficient clamping, a lack of material reduces strength and, thus, usability. In the research presented here, the use of aluminum filler wire (AA 1050A) and shielding gas are investigated for the application of welding 40 aluminum foils (AA 1050A) with a thickness of 15 μm to an aluminum sheet with a thickness of 2 mm using infrared laser beam wavelength. The aims of the process development are welds with high connection widths and high quality as well as reproducibility to provide excellent mechanical properties and the highest electrical conductivity.
- Open Access
- 15 September 2023
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (4)
Investigations on improving the properties of laser beam welded thick dissimilar joints of steel and aluminum by using filler material
Thick dissimilar joints of steel and aluminum are still of high interest for shipbuilding in order to reduce the weight and the center of gravity of the ship. Thereby, a reduction of the CO2 emissions as a result of lower fuel consumption and a higher ship stability are achievable. The steel and aluminum ship parts are joined with the aid of an explosive-welded adapter, whose manufacturing is complex, time-consuming, and expensive. Furthermore, the adapter must be oversized to meet strength requirements. Therefore, the shipbuilding industry demands a better alternative. In this study, laser beam welding processes are developed for joining steel S355 J2 (t = 5 mm) with aluminum alloy AA6082-T651 (t = 10 mm) in a lap configuration using a laser beam source with a maximum output power of PL = 6 kW. Laser beam welding of this dissimilar material combination brings certain challenges, such as the formation of brittle microstructures in the weld metal depending on the aluminum content. To improve the microstructure and the associated mechanical properties of the weld seam, a filler material in the form of iron welding powder is used. The welding powder is provided in a groove in the aluminum bottom sheet. In this way, an iron-rich microstructure results, which leads to an increase in the weld seam quality, as shown in metallographic analysis and tensile tests. For example, the cross tension force can be increased by 100%.
- 15 September 2023
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (4)
Open AccessInvestigations on improving the properties of laser beam welded thick dissimilar joints of steel and aluminum by using filler material
Thick dissimilar joints of steel and aluminum are still of high interest for shipbuilding in order to reduce the weight and the center of gravity of the ship. Thereby, a reduction of the CO2 emissions as a result of lower fuel consumption and a higher ship stability are achievable. The steel and aluminum ship parts are joined with the aid of an explosive-welded adapter, whose manufacturing is complex, time-consuming, and expensive. Furthermore, the adapter must be oversized to meet strength requirements. Therefore, the shipbuilding industry demands a better alternative. In this study, laser beam welding processes are developed for joining steel S355 J2 (t = 5 mm) with aluminum alloy AA6082-T651 (t = 10 mm) in a lap configuration using a laser beam source with a maximum output power of PL = 6 kW. Laser beam welding of this dissimilar material combination brings certain challenges, such as the formation of brittle microstructures in the weld metal depending on the aluminum content. To improve the microstructure and the associated mechanical properties of the weld seam, a filler material in the form of iron welding powder is used. The welding powder is provided in a groove in the aluminum bottom sheet. In this way, an iron-rich microstructure results, which leads to an increase in the weld seam quality, as shown in metallographic analysis and tensile tests. For example, the cross tension force can be increased by 100%.
- 27 October 2022
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 34 (4) , 042031
Investigations on laser beam welding of thick steel plates using a high-power diode laser beam source
For joining of thick steel plates, commonly arc welding and partially laser-arc hybrid welding are used. Both techniques offer individual disadvantages besides their advantages. Arc welding processes are typically characterized by low welding speeds, high heat inputs, high distortions, and high filler material consumptions. Laser-arc hybrid welding processes are limited to weldable material thicknesses regarding weld imperfections as well as the ability to bridge gaps. Therefore, the investigations presented are about high-power diode laser beam welding of steel with plate thicknesses t between 15 and 30 mm using output powers PL of up to 60 kW and welding speeds v between 0.5 and 1.0 m/min. The welding experiments contain butt welds by using weld backing materials. Among other things, influence of energy per unit length (laser beam power PL, welding speed v), focal position z, and plate thickness t are analyzed for different reproducible processes. The evaluation of weld seams includes visual inspection, metallographic analyses regarding geometric characteristics, and weld imperfections as well as radiographic inspections. The investigations show achievable qualities and characteristics of the weld seams depending on the plate thickness t by using high-power diode laser beam sources. Weld seams on plates with thicknesses t of 15 and 22 mm were welded without cracks or other weld imperfections according to metallographic analyses and radiographic testing by using a laser beam power PL of 40 kW and the suitable process parameters developed. As a result, relatively high plate thicknesses t can be welded in a single layer with high quality as well as comparatively high welding speed v.
- 27 October 2022
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 34 (4) , 042031
Investigations on laser beam welding of thick steel plates using a high-power diode laser beam source
For joining of thick steel plates, commonly arc welding and partially laser-arc hybrid welding are used. Both techniques offer individual disadvantages besides their advantages. Arc welding processes are typically characterized by low welding speeds, high heat inputs, high distortions, and high filler material consumptions. Laser-arc hybrid welding processes are limited to weldable material thicknesses regarding weld imperfections as well as the ability to bridge gaps. Therefore, the investigations presented are about high-power diode laser beam welding of steel with plate thicknesses t between 15 and 30 mm using output powers PL of up to 60 kW and welding speeds v between 0.5 and 1.0 m/min. The welding experiments contain butt welds by using weld backing materials. Among other things, influence of energy per unit length (laser beam power PL, welding speed v), focal position z, and plate thickness t are analyzed for different reproducible processes. The evaluation of weld seams includes visual inspection, metallographic analyses regarding geometric characteristics, and weld imperfections as well as radiographic inspections. The investigations show achievable qualities and characteristics of the weld seams depending on the plate thickness t by using high-power diode laser beam sources. Weld seams on plates with thicknesses t of 15 and 22 mm were welded without cracks or other weld imperfections according to metallographic analyses and radiographic testing by using a laser beam power PL of 40 kW and the suitable process parameters developed. As a result, relatively high plate thicknesses t can be welded in a single layer with high quality as well as comparatively high welding speed v.
- 26 September 2022
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 34 (4) , 042011
Investigations on laser beam welding of thin foils of copper and aluminum regarding weld seam quality using different laser beam sources
Nowadays, there is a strong and growing ambition to switch from combustion technology to battery-electric drives, and energy storage is spotlighted. Laser beam welding is an appropriate and favorable welding technology in battery production. Due to the high welding speed, the local heat input, the contact freeness efficient, and automatable processes can be established. Materials used in batteries for electrodes that have to be connected are commonly copper and aluminum. Specifically, copper is highly reflective for widely used infrared laser beam wavelengths. Furthermore, the thickness in the area of 10 μm is quite challenging to deal with, in terms of gap free clamping and avoidance of damage to the material as well as distortion during welding. There is a fine line regarding energy input between burning the material and generating a lack of fusion. In the presented research, welding approaches with different laser beam sources emitting laser beams with infrared wavelengths, various beam shapes, and welding modes (continuous and pulsed) are studied. A total of 40 copper foils with a thickness of 10 μm and 40 aluminum foils with a thickness of 15 μm are welded to similar sheet metals. Aim of the process development are welds with high quality and high connection widths to provide the best electric conductivity.
- 26 September 2022
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 34 (4) , 042011
Investigations on laser beam welding of thin foils of copper and aluminum regarding weld seam quality using different laser beam sources
Nowadays, there is a strong and growing ambition to switch from combustion technology to battery-electric drives, and energy storage is spotlighted. Laser beam welding is an appropriate and favorable welding technology in battery production. Due to the high welding speed, the local heat input, the contact freeness efficient, and automatable processes can be established. Materials used in batteries for electrodes that have to be connected are commonly copper and aluminum. Specifically, copper is highly reflective for widely used infrared laser beam wavelengths. Furthermore, the thickness in the area of 10 μm is quite challenging to deal with, in terms of gap free clamping and avoidance of damage to the material as well as distortion during welding. There is a fine line regarding energy input between burning the material and generating a lack of fusion. In the presented research, welding approaches with different laser beam sources emitting laser beams with infrared wavelengths, various beam shapes, and welding modes (continuous and pulsed) are studied. A total of 40 copper foils with a thickness of 10 μm and 40 aluminum foils with a thickness of 15 μm are welded to similar sheet metals. Aim of the process development are welds with high quality and high connection widths to provide the best electric conductivity.