Investigations on laser beam welding of thick steel plates using a high-power diode laser beam source
- 27 October 2022
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 34 (4) , 042031
Abstract
For joining of thick steel plates, commonly arc welding and partially laser-arc hybrid welding are used. Both techniques offer individual disadvantages besides their advantages. Arc welding processes are typically characterized by low welding speeds, high heat inputs, high distortions, and high filler material consumptions. Laser-arc hybrid welding processes are limited to weldable material thicknesses regarding weld imperfections as well as the ability to bridge gaps. Therefore, the investigations presented are about high-power diode laser beam welding of steel with plate thicknesses t between 15 and 30 mm using output powers PL of up to 60 kW and welding speeds v between 0.5 and 1.0 m/min. The welding experiments contain butt welds by using weld backing materials. Among other things, influence of energy per unit length (laser beam power PL, welding speed v), focal position z, and plate thickness t are analyzed for different reproducible processes. The evaluation of weld seams includes visual inspection, metallographic analyses regarding geometric characteristics, and weld imperfections as well as radiographic inspections. The investigations show achievable qualities and characteristics of the weld seams depending on the plate thickness t by using high-power diode laser beam sources. Weld seams on plates with thicknesses t of 15 and 22 mm were welded without cracks or other weld imperfections according to metallographic analyses and radiographic testing by using a laser beam power PL of 40 kW and the suitable process parameters developed. As a result, relatively high plate thicknesses t can be welded in a single layer with high quality as well as comparatively high welding speed v.Keywords
Funding Information
- Federal Ministry for Economic Affairs and Climate Action (03SX452B)
This publication has 9 references indexed in Scilit:
- On the search for the origin of the bulge effect in high power laser beam weldingJournal of Laser Applications, 2019
- Hybrid laser-metal active gas welding of S460ML steel plates: Weldability and consequences of dropping on weld qualityJournal of Laser Applications, 2016
- Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sourcesJournal of Laser Applications, 2014
- Solidification cracking in laser GMA hybrid welding of thick-walled partsScience and Technology of Welding and Joining, 2014
- Numerical Analysis of Hot Cracking in Laser-Hybrid Welded TubesAdvances in Materials Science and Engineering, 2013
- Geometrical aspects of hot cracks in laser-arc hybrid weldingJournal of Laser Applications, 2013
- Detaillösungen für ermüdungsbeanspruchte Tripod-GründungsstrukturenStahlbau, 2007
- Schweißen von Feinkornstählen und deren Eignung für Offshore-WindenergieanlagenStahlbau, 2005
- Herstellung, Verarbeitung und Eigenschaften höherfester Stähle für den Einsatz in WindenergieanlagenStahlbau, 2005