Maciej Adam Dybizbański
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Maciej Adam Dybizbański has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Katarzyna Rzeszut
Poznan University of Technology
8 shared publications - Marceli Hązła
Poznań University of Economics and Business
2 shared publications - Aleksandra Szczepańska
Poznan Univ Tech, Fac Civil & Transport Engn, Ul Marii Sklodowskiej Curie 5, PL-60965 Poznan, Poland
1 shared publication - Alicja Krajewska
Faculty of Civil and Transport Engineering, Poznań University of Technology, 5 Marii Skłodowskiej-Curie Str, 60-965 Poznań, Poland
1 shared publication - Ilona Szewczak
Faculty of Civil Engineering, Lublin University of Technology, 40 Nadbystrzycka Str., 20-618 Lublin, Poland
1 shared publication - Saydiolimkhon Abdusattarkhuja
Faculty of Civil and Transport Engineering, Poznań University of Technology, 5 Marii Skłodowskiej-Curie Str., 60-965 Poznań, Poland
1 shared publication
Latest Publications
- Open Access
Techno-Economic Approach to Carbon Fibre Fabrics for Structural Strengthening: Life-Cycle Cost Analysis, Market Value, and Economic Viability
The escalating financial burden of deteriorating civil infrastructure worldwide necessitates a shift from conventional repair methods towards more durable and economically efficient long-term solutions. This paper presents a comprehensive techno-economic review of using carbon fibre-reinforced polymer (CFRP) fabrics for structural strengthening. Moving beyond a simple first-cost comparison, this review utilizes a life-cycle cost analysis (LCCA) framework to evaluate the total cost of ownership. The analysis deconstructs the complete cost profile, demonstrating that while CFRP systems have a high initial material cost, this is frequently offset by substantial savings in labour, equipment, and, critically, the indirect costs associated with reduced construction time and operational disruption. Furthermore, the inherent corrosion immunity of CFRP virtually eliminates future maintenance and repair expenditures, leading to a lower total life-cycle cost compared to traditional steel or concrete-based methods in a wide range of applications. Specifically, the conducted LCCA case study demonstrates that the CFRP alternative can reduce total life-cycle costs by nearly 25% relative to conventional steel sheet bonding, overwhelmingly driven by minimized operational downtime and related indirect costs. The value proposition is shown to be context-dependent, driven by minimizing user delay costs in bridges, mitigating catastrophic risk in seismic retrofitting, preserving cultural value in heritage structures, and maximizing revenue uptime in industrial facilities. The review also examines market dynamics, including the roles of standardization and government policy in driving adoption, and explores future trends such as inorganic matrix composites (TRM/FRCM), integrated structural health monitoring (SHM), and the push towards a circular economy. The findings conclude that a holistic, life-cycle-based economic assessment establishes CFRP strengthening as a cornerstone technology for the sustainable and resilient management of modern civil infrastructure.
Open AccessTechno-Economic Approach to Carbon Fibre Fabrics for Structural Strengthening: Life-Cycle Cost Analysis, Market Value, and Economic Viability
The escalating financial burden of deteriorating civil infrastructure worldwide necessitates a shift from conventional repair methods towards more durable and economically efficient long-term solutions. This paper presents a comprehensive techno-economic review of using carbon fibre-reinforced polymer (CFRP) fabrics for structural strengthening. Moving beyond a simple first-cost comparison, this review utilizes a life-cycle cost analysis (LCCA) framework to evaluate the total cost of ownership. The analysis deconstructs the complete cost profile, demonstrating that while CFRP systems have a high initial material cost, this is frequently offset by substantial savings in labour, equipment, and, critically, the indirect costs associated with reduced construction time and operational disruption. Furthermore, the inherent corrosion immunity of CFRP virtually eliminates future maintenance and repair expenditures, leading to a lower total life-cycle cost compared to traditional steel or concrete-based methods in a wide range of applications. Specifically, the conducted LCCA case study demonstrates that the CFRP alternative can reduce total life-cycle costs by nearly 25% relative to conventional steel sheet bonding, overwhelmingly driven by minimized operational downtime and related indirect costs. The value proposition is shown to be context-dependent, driven by minimizing user delay costs in bridges, mitigating catastrophic risk in seismic retrofitting, preserving cultural value in heritage structures, and maximizing revenue uptime in industrial facilities. The review also examines market dynamics, including the roles of standardization and government policy in driving adoption, and explores future trends such as inorganic matrix composites (TRM/FRCM), integrated structural health monitoring (SHM), and the push towards a circular economy. The findings conclude that a holistic, life-cycle-based economic assessment establishes CFRP strengthening as a cornerstone technology for the sustainable and resilient management of modern civil infrastructure.
- Open Access
- 12 March 2026
- Published by Uniwersytet Mikolaja Kopernika/Nicolaus Copernicus University in Historia i Polityka
- No. 55 (62),p. 65-79
Prezydent Rzeczypospolitej Polskiej jako obywatelski autorytet. Czy Polska potrzebuje instytucji doktryny prezydenckiej?
W artykule przedstawiono analizę dotyczącą problematyki autorytetu Prezydenta Rzeczypospolitej Polskiej, koncentrując się na koncepcji budowania autorytetu obywatelskiego oraz roli doktryny prezydenckiej w tym procesie. W oparciu o teoretyczne ramy nauk politycznych i socjologii w artykule rozróżniono autorytet polityczny, formalny i obywatelski, podkreślając znaczenie tego ostatniego dla funkcji głowy państwa. Przeprowadzona analiza konstytucyjnych kompetencji i ograniczeń Prezydenta RP ujawnia zarówno potencjał zawarty w procesie kreowania autorytetu, jak i obecne w nim bariery. Studium porównawcze doktryn prezydenckich w Stanach Zjednoczonych i Francji dostarcza kontekstu dla debaty o możliwościach zaistnienia doktryny polskiej. W artykule przedstawiono argumenty za i przeciw jej ustanowieniu, rozważając jej implikacje dla polskiego systemu politycznego. W konkluzjach przedstawiono podsumowanie debaty i wskazano dalsze kierunki badań.
- 12 March 2026
- Published by Uniwersytet Mikolaja Kopernika/Nicolaus Copernicus University in Historia i Polityka
- No. 55 (62),p. 65-79
Open AccessPrezydent Rzeczypospolitej Polskiej jako obywatelski autorytet. Czy Polska potrzebuje instytucji doktryny prezydenckiej?
W artykule przedstawiono analizę dotyczącą problematyki autorytetu Prezydenta Rzeczypospolitej Polskiej, koncentrując się na koncepcji budowania autorytetu obywatelskiego oraz roli doktryny prezydenckiej w tym procesie. W oparciu o teoretyczne ramy nauk politycznych i socjologii w artykule rozróżniono autorytet polityczny, formalny i obywatelski, podkreślając znaczenie tego ostatniego dla funkcji głowy państwa. Przeprowadzona analiza konstytucyjnych kompetencji i ograniczeń Prezydenta RP ujawnia zarówno potencjał zawarty w procesie kreowania autorytetu, jak i obecne w nim bariery. Studium porównawcze doktryn prezydenckich w Stanach Zjednoczonych i Francji dostarcza kontekstu dla debaty o możliwościach zaistnienia doktryny polskiej. W artykule przedstawiono argumenty za i przeciw jej ustanowieniu, rozważając jej implikacje dla polskiego systemu politycznego. W konkluzjach przedstawiono podsumowanie debaty i wskazano dalsze kierunki badań.
- Open Access
Simplified Fracture Mechanics Analysis at the Zinc–Adhesive Interface in Galvanized Steel–CFRP Single-Lap Joints
Adhesively bonded joints between galvanized steel and carbon fiber-reinforced polymers (CFRPs) are critical in modern lightweight structures, but their performance is often limited by failure at the zinc–adhesive interface. This study presents a parametric analysis to investigate the influence of key geometric parameters on interfacial cracking in a single-lap joint (SLJ) configuration, employing a simplified analytical methodology based on Interface Fracture Mechanics (IFM). The model combines the Goland–Reissner approach for estimating crack-tip loads with highly simplified, constant shape functions to calculate the energy release rate () and phase angle (). To provide a practical reference, experimental data from shear tests on S350 GD galvanized steel bonded to CFRP were used to estimate the range of interfacial fracture toughness for this material system. The parametric results demonstrate that, for a constant load, increasing the overlap length reduces the crack driving force (), while increasing the adhesive thickness raises it. Crucially, the model indicates that a thicker adhesive layer shifts the fracture mode from shear- to opening-dominated, a trend consistent with the established mechanics of SLJs, where increased joint rotation amplifies peel stresses. The study concludes that while the use of constant shape functions limits the model’s quantitative accuracy, this simplified analytical framework effectively captures the qualitative influence of key geometric parameters on the joint’s fracture behavior. It serves as a valuable and resource-efficient tool for preliminary design explorations and for interpreting experimentally observed failure trends in galvanized steel–CFRP joints.Open AccessSimplified Fracture Mechanics Analysis at the Zinc–Adhesive Interface in Galvanized Steel–CFRP Single-Lap Joints
Adhesively bonded joints between galvanized steel and carbon fiber-reinforced polymers (CFRPs) are critical in modern lightweight structures, but their performance is often limited by failure at the zinc–adhesive interface. This study presents a parametric analysis to investigate the influence of key geometric parameters on interfacial cracking in a single-lap joint (SLJ) configuration, employing a simplified analytical methodology based on Interface Fracture Mechanics (IFM). The model combines the Goland–Reissner approach for estimating crack-tip loads with highly simplified, constant shape functions to calculate the energy release rate () and phase angle (). To provide a practical reference, experimental data from shear tests on S350 GD galvanized steel bonded to CFRP were used to estimate the range of interfacial fracture toughness for this material system. The parametric results demonstrate that, for a constant load, increasing the overlap length reduces the crack driving force (), while increasing the adhesive thickness raises it. Crucially, the model indicates that a thicker adhesive layer shifts the fracture mode from shear- to opening-dominated, a trend consistent with the established mechanics of SLJs, where increased joint rotation amplifies peel stresses. The study concludes that while the use of constant shape functions limits the model’s quantitative accuracy, this simplified analytical framework effectively captures the qualitative influence of key geometric parameters on the joint’s fracture behavior. It serves as a valuable and resource-efficient tool for preliminary design explorations and for interpreting experimentally observed failure trends in galvanized steel–CFRP joints. - 30 June 2025
- Published by Index Copernicus in Inżynieria i Budownictwo
- Vol. LXXXI (3) , 282-292
Application of digital image correlation to the analysis of displacement field of thin-walled steel sigma beams reinforced with carbon fiber fabric
This paper presents the results of laboratory tests obtained using the ARAMIS 6M digital image correlation method. The displacement measurement and deformation assessment were carried out for CFS beams with a cross-section of 200×70×2 and a span of 2700 mm, made of S350GD steel, reinforced and unreinforced (reference), loaded in a four-point bending scheme. The beams were reinforced with SikaWrap 230 C fabric glued to the edge stiffeners using SikaDur 330 adhesive. The tests were carried out for two cases, i.e., with the possibility of cross-section deplanation at the supports and for the lack of deplanation at the supports. Based on the obtained results, it was found that in the case of vertical and horizontal displacements, the use of the proposed reinforcement has a particularly beneficial effect for the case when there is no possibility of cross-section deplanation at the supports.
- 30 June 2025
- Published by Index Copernicus in Inżynieria i Budownictwo
- Vol. LXXXI (3) , 282-292
Application of digital image correlation to the analysis of displacement field of thin-walled steel sigma beams reinforced with carbon fiber fabric
This paper presents the results of laboratory tests obtained using the ARAMIS 6M digital image correlation method. The displacement measurement and deformation assessment were carried out for CFS beams with a cross-section of 200×70×2 and a span of 2700 mm, made of S350GD steel, reinforced and unreinforced (reference), loaded in a four-point bending scheme. The beams were reinforced with SikaWrap 230 C fabric glued to the edge stiffeners using SikaDur 330 adhesive. The tests were carried out for two cases, i.e., with the possibility of cross-section deplanation at the supports and for the lack of deplanation at the supports. Based on the obtained results, it was found that in the case of vertical and horizontal displacements, the use of the proposed reinforcement has a particularly beneficial effect for the case when there is no possibility of cross-section deplanation at the supports.
- Open Access
Determination of Strength Parameters of Composite Reinforcement Consisting of Steel Member, Adhesive, and Carbon Fiber Textile
The main aim of the study was the determination of the strength parameters of composite bonded joints consisting of galvanised steel elements, an adhesive layer, and Carbon-Fiber-Reinforced Plastic (CFRP) fabric. For this purpose, shear laboratory tests were carried out on 60 lapped specimens composed of 2 mm thick hot-dip galvanised steel plates of S350 GD. The specimens were overlapped on one side with SikaWrap 230 C carbon fibre textile (CFT) using SikaDur 330 adhesive. The tests were carried out in three series that differed in overlap length (15 mm, 25 mm, and 35 mm). A discussion on the failure mechanism in the context of the bonding capacity of the composite joint was carried out. We observed three forms of joint damage, namely, at the steel-adhesive interface, fibre rupture, and mixed damage behaviour. Moreover, an advanced numerical model using the commercial finite element (FE) program ABAQUS/Standard and the coupled cohesive zone model was developed. The material behaviour of the textile was defined as elastic-lamina and the mixed-mode Hashin damage model was implemented with bi-linear behaviour. Special attention was focused on the formulation of reliable methodologies to determine the load-bearing capacity, failure mechanisms, stress distribution, and the strength characteristics of a composite adhesive joint. In order to develop a reliable model, validation and verification were carried out and self-correlation parameters, which brought the model closer to the laboratory test, were proposed by the authors. Based on the conducted analysis, the strength characteristics including the load-bearing capacity, failure mechanisms, and stress distribution were established. The three forms of joint damage were observed as steel-adhesive interface failure, fibre rupture, and mixed-damage behaviour. Complex interactions between the materials were observed. The most dangerous adhesive failure was detected at the steel and adhesive interface. It was also found that an increase in adhesive thickness caused a decrease in joint strength. In the numerical analysis, two mechanical models were employed, namely, a sophisticated model of adhesive and fabric components. It was found that the fabric model was very sensitive to the density of the finite element mesh. It was also noticed that the numerical model referring to the adhesive layer was nonsensitive to the mesh size; thus, it was regarded as appropriate. Nevertheless, in order to increase the reliability of the numerical model, the authors proposed their own correlation coefficients α and β, which allowed for the correct mapping of adhesive damage.
Open AccessDetermination of Strength Parameters of Composite Reinforcement Consisting of Steel Member, Adhesive, and Carbon Fiber Textile
The main aim of the study was the determination of the strength parameters of composite bonded joints consisting of galvanised steel elements, an adhesive layer, and Carbon-Fiber-Reinforced Plastic (CFRP) fabric. For this purpose, shear laboratory tests were carried out on 60 lapped specimens composed of 2 mm thick hot-dip galvanised steel plates of S350 GD. The specimens were overlapped on one side with SikaWrap 230 C carbon fibre textile (CFT) using SikaDur 330 adhesive. The tests were carried out in three series that differed in overlap length (15 mm, 25 mm, and 35 mm). A discussion on the failure mechanism in the context of the bonding capacity of the composite joint was carried out. We observed three forms of joint damage, namely, at the steel-adhesive interface, fibre rupture, and mixed damage behaviour. Moreover, an advanced numerical model using the commercial finite element (FE) program ABAQUS/Standard and the coupled cohesive zone model was developed. The material behaviour of the textile was defined as elastic-lamina and the mixed-mode Hashin damage model was implemented with bi-linear behaviour. Special attention was focused on the formulation of reliable methodologies to determine the load-bearing capacity, failure mechanisms, stress distribution, and the strength characteristics of a composite adhesive joint. In order to develop a reliable model, validation and verification were carried out and self-correlation parameters, which brought the model closer to the laboratory test, were proposed by the authors. Based on the conducted analysis, the strength characteristics including the load-bearing capacity, failure mechanisms, and stress distribution were established. The three forms of joint damage were observed as steel-adhesive interface failure, fibre rupture, and mixed-damage behaviour. Complex interactions between the materials were observed. The most dangerous adhesive failure was detected at the steel and adhesive interface. It was also found that an increase in adhesive thickness caused a decrease in joint strength. In the numerical analysis, two mechanical models were employed, namely, a sophisticated model of adhesive and fabric components. It was found that the fabric model was very sensitive to the density of the finite element mesh. It was also noticed that the numerical model referring to the adhesive layer was nonsensitive to the mesh size; thus, it was regarded as appropriate. Nevertheless, in order to increase the reliability of the numerical model, the authors proposed their own correlation coefficients α and β, which allowed for the correct mapping of adhesive damage.
- Open Access
- 22 July 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 18 (6) , 206-217
Determination of the Load-Bearing Capacity of the Bonded Joint of Hot-Dip Galvanised Steel Elements with CFRP Fabric – Pilot Laboratory and Numerical Investigations
In this paper, an attempt was made to determine the load-bearing capacity of a bonded joint of galvanized steel elements with CFRP fabric. This issue is extremely relevant to the use of bonded carbon fiber fabric as a mean of reinforcing hot-dip galvanized steel structures. This technique is used...
- 22 July 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 18 (6) , 206-217
Open AccessDetermination of the Load-Bearing Capacity of the Bonded Joint of Hot-Dip Galvanised Steel Elements with CFRP Fabric – Pilot Laboratory and Numerical Investigations
In this paper, an attempt was made to determine the load-bearing capacity of a bonded joint of galvanized steel elements with CFRP fabric. This issue is extremely relevant to the use of bonded carbon fiber fabric as a mean of reinforcing hot-dip galvanized steel structures. This technique is used...
- 28 August 2023
- Published by Index Copernicus in Przegląd Budowlany
- Vol. 94 (7-8) , 111-116
Badania laboratoryjne wzmacnianych belek stalowychcienkościennych typu sigma za pomocą tkanin CFRPz zastosowaniem bezdotykowych metod optycznych
- 28 August 2023
- Published by Index Copernicus in Przegląd Budowlany
- Vol. 94 (7-8) , 111-116
Badania laboratoryjne wzmacnianych belek stalowychcienkościennych typu sigma za pomocą tkanin CFRPz zastosowaniem bezdotykowych metod optycznych
- Open Access
- 7 August 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 17 (4) , 110-120
Experimental and Theoretical Investigation of Galvanized Steel and Fiber-Reinforced Polymer Composites Textile Adhesive Double Lap Joints
This paper presents an experimental analysis of CFRP fabric to galvanized steel adhesive connection. An experimental research has been conducted on the adhesive connection between CFRP fabric and galvanized steel subjected to shear forces. The specimens were made from the steel plates overlapped...
- 7 August 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 17 (4) , 110-120
Open AccessExperimental and Theoretical Investigation of Galvanized Steel and Fiber-Reinforced Polymer Composites Textile Adhesive Double Lap Joints
This paper presents an experimental analysis of CFRP fabric to galvanized steel adhesive connection. An experimental research has been conducted on the adhesive connection between CFRP fabric and galvanized steel subjected to shear forces. The specimens were made from the steel plates overlapped...
- Open Access
- 1 October 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 16 (4) , 106-118
Stress Analysis of Steel Beams Made of Sigma Cross-Section
This paper presents a stress analysis of elements made of a steel cold-formed sigma cross-section, uniformly loaded in a plane parallel to the web and not passing through the shear centre. Such an application of a load very often occurs in engineering practice and corresponds to the application...
- 1 October 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 16 (4) , 106-118
Open AccessStress Analysis of Steel Beams Made of Sigma Cross-Section
This paper presents a stress analysis of elements made of a steel cold-formed sigma cross-section, uniformly loaded in a plane parallel to the web and not passing through the shear centre. Such an application of a load very often occurs in engineering practice and corresponds to the application...