Jingyuan Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jingyuan Han has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Gang Liu
Department of Fundamental Network Operations, China Telecom Research Institute, Shanghai, China
5 shared publications - Yi Zhou
China Telecom Research Institute, Shanghai 200120, China
5 shared publications - Tao Liu
China Telecom Research Institute, Shanghai 200120, China
3 shared publications - Chengxiao Yu
Peng Cheng Laboratory, Shenzhen, China
2 shared publications - Xin Zeng
Department of Information and Communication Engineering, Tongji University, Shanghai 200070, China
2 shared publications - Yuxuan Li
Department of Fundamental Network Operations, China Telecom Research Institute, Shanghai, China
2 shared publications
Latest Publications
- Open Access
- 1 December 2025
- Published by KEAI Publishing in Digital Communications and Networks
- Vol. 11 (6) , 1864-1873
Large models based high-fidelity voice services over 6G narrowband non-terrestrial networks
- 1 December 2025
- Published by KEAI Publishing in Digital Communications and Networks
- Vol. 11 (6) , 1864-1873
Open AccessLarge models based high-fidelity voice services over 6G narrowband non-terrestrial networks
- 11 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 28 (3) , 572-576
Model-Driven Learning for Physical Layer Authentication in Dynamic Environments
This letter investigates the physical layer authentication (PLA) in dynamic environments, where the users have different mobility velocities. The performance of PLA in this scenario suffers from the inaccurate prediction of the channel statement information (CSI) owing to the Doppler shifts and multipath fading. To overcome the difficulty, a model-driven learning algorithm is developed to predict dynamic CSI. Specifically, the Bahdanau Attention Autoencoder (BAAE)-based PLA scheme is proposed to extract relevant channel features and mitigate inter-symbol interference and inter-carrier interference. Compared to existing deep learning-based PLA schemes, the proposed scheme addresses the core factors contributing to poor authentication accuracy at the algorithmic level, rather than brute-force learning from bigger datasets. Experiment results show that the proposed scheme presents more accurate predictions and lower complexity compared with the existing data-driven models across all tested signal noise ratio levels and velocities. Moreover, it is robust to maintain 99.6% authentication accuracy even when the users are moving with high velocities.
- 11 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 28 (3) , 572-576
Model-Driven Learning for Physical Layer Authentication in Dynamic Environments
This letter investigates the physical layer authentication (PLA) in dynamic environments, where the users have different mobility velocities. The performance of PLA in this scenario suffers from the inaccurate prediction of the channel statement information (CSI) owing to the Doppler shifts and multipath fading. To overcome the difficulty, a model-driven learning algorithm is developed to predict dynamic CSI. Specifically, the Bahdanau Attention Autoencoder (BAAE)-based PLA scheme is proposed to extract relevant channel features and mitigate inter-symbol interference and inter-carrier interference. Compared to existing deep learning-based PLA schemes, the proposed scheme addresses the core factors contributing to poor authentication accuracy at the algorithmic level, rather than brute-force learning from bigger datasets. Experiment results show that the proposed scheme presents more accurate predictions and lower complexity compared with the existing data-driven models across all tested signal noise ratio levels and velocities. Moreover, it is robust to maintain 99.6% authentication accuracy even when the users are moving with high velocities.
- 16 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (6) , 9230-9243
E-Chain: Lightweight and Secure BIoT Voting Mechanism on Variable Bandwidth Networks
The convergence of Blockchain and Internet of Things (BIoT) is fully considered as a paradigm for mitigating threats related to the trust, security, and privacy of Internet of Things (IoT) data. However, because the bandwidth across nodes and time varies in practical IoT networks, it is difficult for existing BIoT mechanisms guarantee blockchain consensus performances. The consensus time could become long owing to low-bandwidth nodes taking longer to download blocks than high-bandwidth nodes. Conventional wisdom holds that removing low-bandwidth nodes can decrease the consensus time, but the nodes could have high-bandwidth at another time owing to bandwidth variability; thus, kicking which nodes out of the consensus is a great challenge. In this article, a novel lightweight BIoT convergence (namely, E-Chain) is proposed to overcome bandwidth variability. The E-Chain first decouples the blockchain into on-chain validating and off-chain voting components. In the off-chain voting part, each node incurs a one-bit communication overhead for voting on a block based on a reputation index. This voting component does not need to download the full content of the block, and is therefore not affected by bandwidth variability. The reputation index was formulated using a rating algorithm with multidimensional IoT network metrics. In addition, the voting mechanism is secure and can still reach the correct consensus when suffering from byzantine attacks. By contrast, a block is validated and stored in a dispersed manner in the on-chain validating part. The E-Chain performances were then evaluated and compared with state-of-the-art mechanisms. Experimental results show that the E-Chain mechanism can significantly decrease both the consensus time and memory resources, and incur an acceptable memory overhead for resource-constrained IoT nodes.
- 16 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (6) , 9230-9243
E-Chain: Lightweight and Secure BIoT Voting Mechanism on Variable Bandwidth Networks
The convergence of Blockchain and Internet of Things (BIoT) is fully considered as a paradigm for mitigating threats related to the trust, security, and privacy of Internet of Things (IoT) data. However, because the bandwidth across nodes and time varies in practical IoT networks, it is difficult for existing BIoT mechanisms guarantee blockchain consensus performances. The consensus time could become long owing to low-bandwidth nodes taking longer to download blocks than high-bandwidth nodes. Conventional wisdom holds that removing low-bandwidth nodes can decrease the consensus time, but the nodes could have high-bandwidth at another time owing to bandwidth variability; thus, kicking which nodes out of the consensus is a great challenge. In this article, a novel lightweight BIoT convergence (namely, E-Chain) is proposed to overcome bandwidth variability. The E-Chain first decouples the blockchain into on-chain validating and off-chain voting components. In the off-chain voting part, each node incurs a one-bit communication overhead for voting on a block based on a reputation index. This voting component does not need to download the full content of the block, and is therefore not affected by bandwidth variability. The reputation index was formulated using a rating algorithm with multidimensional IoT network metrics. In addition, the voting mechanism is secure and can still reach the correct consensus when suffering from byzantine attacks. By contrast, a block is validated and stored in a dispersed manner in the on-chain validating part. The E-Chain performances were then evaluated and compared with state-of-the-art mechanisms. Experimental results show that the E-Chain mechanism can significantly decrease both the consensus time and memory resources, and incur an acceptable memory overhead for resource-constrained IoT nodes.
- Open Access
- 29 June 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (13) , 7699
FPLA: A Flexible Physical Layer Authentication Mechanism for Distributing Quantum Keys Securely via Wireless 5G Channels
Quantum Key Distribution (QKD) is popular for establishing a native secure quantum communication network. However, existing QKD networks are built via classical wired fiber channels; it is difficult to distribute quantum keys directly into mobile phones, and no effective candidate solution is available yet. This paper presents a novel Flexible Physical Layer Authentication (FPLA) mechanism that exploits the unique characteristic of wireless signals from mobile phones to securely distribute quantum keys via wireless 5G channels. In particular, a 5G Up-Link Sounding Reference Signal (SRS)-based transmission model is developed to capture and extract the unique characteristic, which is then used to distribute quantum keys. Moreover, the model could lose accuracy due to SRS variations introduced by 5G Multiuser Multiple-Input Multiple-Output (MU-MIMO), so a dimensional transformation residual network is designed to classify legitimate and malicious user equipment (UE). An average authentication accuracy of 96.8% is proved by FPLA in multiple experiments in a 3 dB Signal-to-Noise Ratio (SNR) test environment with a training dataset of 300 samples per malicious UE. Simulation results show that FPLA is able to adapt to antenna diversity in 5G MU-MIMO systems.
- 29 June 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (13) , 7699
Open AccessFPLA: A Flexible Physical Layer Authentication Mechanism for Distributing Quantum Keys Securely via Wireless 5G Channels
Quantum Key Distribution (QKD) is popular for establishing a native secure quantum communication network. However, existing QKD networks are built via classical wired fiber channels; it is difficult to distribute quantum keys directly into mobile phones, and no effective candidate solution is available yet. This paper presents a novel Flexible Physical Layer Authentication (FPLA) mechanism that exploits the unique characteristic of wireless signals from mobile phones to securely distribute quantum keys via wireless 5G channels. In particular, a 5G Up-Link Sounding Reference Signal (SRS)-based transmission model is developed to capture and extract the unique characteristic, which is then used to distribute quantum keys. Moreover, the model could lose accuracy due to SRS variations introduced by 5G Multiuser Multiple-Input Multiple-Output (MU-MIMO), so a dimensional transformation residual network is designed to classify legitimate and malicious user equipment (UE). An average authentication accuracy of 96.8% is proved by FPLA in multiple experiments in a 3 dB Signal-to-Noise Ratio (SNR) test environment with a training dataset of 300 samples per malicious UE. Simulation results show that FPLA is able to adapt to antenna diversity in 5G MU-MIMO systems.
- Open Access
- 6 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12472
Anomaly Detection and Early Warning Model for Latency in Private 5G Networks
Different from previous generations of communication technology, 5G has tailored several modes especially for industrial applications, such as Ultra-Reliable Low-Latency Communications (URLLC) and Massive Machine Type Communications (mMTC). The industrial private 5G networks require high performance of latency, bandwidth, and reliability, while the deployment environment is usually complicated, causing network problems difficult to identify. This poses a challenge to the operation and maintenance (O&M) of private 5G networks. It is needed to quickly diagnose or predict faults based on high-dimensional data of networks and services to reduce the impact of network faults on services. This paper proposes a ConvAE-Latency model for anomaly detection, which enhances the correlation between target indicators and hidden features by multi-target learning. Meanwhile, transfer learning is applied for anomaly prediction in the proposed LstmAE-TL model to solve the problem of unbalanced samples. Based on the China Telecom data platform, the proposed models are deployed and tested in an Automated Guided Vehicles (AGVs) application scenario. The results have been improved compared to existing research.
- 6 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12472
Open AccessAnomaly Detection and Early Warning Model for Latency in Private 5G Networks
Different from previous generations of communication technology, 5G has tailored several modes especially for industrial applications, such as Ultra-Reliable Low-Latency Communications (URLLC) and Massive Machine Type Communications (mMTC). The industrial private 5G networks require high performance of latency, bandwidth, and reliability, while the deployment environment is usually complicated, causing network problems difficult to identify. This poses a challenge to the operation and maintenance (O&M) of private 5G networks. It is needed to quickly diagnose or predict faults based on high-dimensional data of networks and services to reduce the impact of network faults on services. This paper proposes a ConvAE-Latency model for anomaly detection, which enhances the correlation between target indicators and hidden features by multi-target learning. Meanwhile, transfer learning is applied for anomaly prediction in the proposed LstmAE-TL model to solve the problem of unbalanced samples. Based on the China Telecom data platform, the proposed models are deployed and tested in an Automated Guided Vehicles (AGVs) application scenario. The results have been improved compared to existing research.
- Open Access
- 27 September 2022
- Published by Wiley in Wireless Communications and Mobile Computing
- Vol. 2022, 1-13
QSLT: A Quantum-Based Lightweight Transmission Mechanism against Eavesdropping for IoT Networks
Quantum Key Distribution (QKD) is a promising paradigm for Internet of Things (IoT) networks against eavesdropping attacks. However, classical quantum-based mechanisms are overweight and expensive for resource-constrained IoT devices. That is, the devices need to frequently exchange with the QKD controller via an out-band quantum channel. In this paper, we propose a novel Quantum-based Secure and Lightweight Transmission (QSLT) mechanism to ease the overweight pain for IoT devices against eavesdropping. Particularly, the mechanism predistributes quantum keys into IoT devices with SIM cards. Using one of the keys, QSLT encrypts or decrypts IoT sensitive data. It is noting that an in-band key-selection method is used to negotiate the session key between two different devices. For example, on one IoT device, the in-band method inserts a key-selection field at the end of the encrypted data to indicate the key’s sequence number. After another device receives the data, QSLT extracts the key-selection field and decrypts the data with the selected quantum key stored locally. We implement the proposed mechanism and evaluate its security and transmission performances. Experimental results show that QSLT can transmit IoT data with a lower delay while guaranteeing the security performance. Besides, QSLT also decreases power usage by approximately 58.77% compared with state of the art mechanisms.
- 27 September 2022
- Published by Wiley in Wireless Communications and Mobile Computing
- Vol. 2022, 1-13
Open AccessQSLT: A Quantum-Based Lightweight Transmission Mechanism against Eavesdropping for IoT Networks
Quantum Key Distribution (QKD) is a promising paradigm for Internet of Things (IoT) networks against eavesdropping attacks. However, classical quantum-based mechanisms are overweight and expensive for resource-constrained IoT devices. That is, the devices need to frequently exchange with the QKD controller via an out-band quantum channel. In this paper, we propose a novel Quantum-based Secure and Lightweight Transmission (QSLT) mechanism to ease the overweight pain for IoT devices against eavesdropping. Particularly, the mechanism predistributes quantum keys into IoT devices with SIM cards. Using one of the keys, QSLT encrypts or decrypts IoT sensitive data. It is noting that an in-band key-selection method is used to negotiate the session key between two different devices. For example, on one IoT device, the in-band method inserts a key-selection field at the end of the encrypted data to indicate the key’s sequence number. After another device receives the data, QSLT extracts the key-selection field and decrypts the data with the selected quantum key stored locally. We implement the proposed mechanism and evaluate its security and transmission performances. Experimental results show that QSLT can transmit IoT data with a lower delay while guaranteeing the security performance. Besides, QSLT also decreases power usage by approximately 58.77% compared with state of the art mechanisms.
- Open Access
NetDAO: Toward Trustful and Secure IoT Networks without Central Gateways
The Internet of Things (IoT) suffers from a profound lack of trust between central gateways and sensors, e.g., gateways suspect sensors of flooding malicious packets, and vice versa, sensors suspect gateways of manipulating traffic data. One important reason for the mistrust is the asymmetry of a centralized network organization. A Decentralized Autonomous Organization (DAO) can establish a trustful and symmetric network with the blockchain. However, it is a vacant area for IoT networks to build trust between gateways and sensors within the DAO. In this paper, we firstly propose a trustful and secure IoT Network DAO solution (NetDAO) to mitigate the data manipulation and the malicious flooding packets. In particular, the NetDAO has a security rating algorithm to assign a reputation value for each entity in the network. Based on this, each entity can mitigate the malicious flooding packets using a proof-of-reputation packet-forwarding mechanism. In addition, the NetDAO stores traffic data using the blockchain to mitigate the data manipulation. The experimental results show that the NetDAO effectively mitigates malicious flooding packets and costs 1 s for ∼480 entities to complete the rating algorithm.
Open AccessNetDAO: Toward Trustful and Secure IoT Networks without Central Gateways
The Internet of Things (IoT) suffers from a profound lack of trust between central gateways and sensors, e.g., gateways suspect sensors of flooding malicious packets, and vice versa, sensors suspect gateways of manipulating traffic data. One important reason for the mistrust is the asymmetry of a centralized network organization. A Decentralized Autonomous Organization (DAO) can establish a trustful and symmetric network with the blockchain. However, it is a vacant area for IoT networks to build trust between gateways and sensors within the DAO. In this paper, we firstly propose a trustful and secure IoT Network DAO solution (NetDAO) to mitigate the data manipulation and the malicious flooding packets. In particular, the NetDAO has a security rating algorithm to assign a reputation value for each entity in the network. Based on this, each entity can mitigate the malicious flooding packets using a proof-of-reputation packet-forwarding mechanism. In addition, the NetDAO stores traffic data using the blockchain to mitigate the data manipulation. The experimental results show that the NetDAO effectively mitigates malicious flooding packets and costs 1 s for ∼480 entities to complete the rating algorithm.
- 27 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Novel Physical Layer Key Generation Method Based on WGAN-GP Adversarial Autoencoder
The reciprocity of wireless channel between legitimate nodes is the premise of physical layer security key generation. Deep neural networks provide the non-linear transformation method to extract symmetric keys from reciprocal channel responses and show better freedom and performance than traditional methods. However, the hidden layer output in neural networks is unpredictable and the extracted high-dimensional features can not be estimated in advance, which is difficult to be applied to the key generation in the physical layer. In this paper, the key generation method based on WGAN-GP adversarial autoencoder is proposed to extract features efficiently between legitimate nodes, and the features can be fitted to the Gaussian distribution. Meanwhile, the Wasserstein distance and gradient penalty are applied in the game training to solve the gradient explosion. Compared with the PCA method, the proposed method has higher security key capacity, lower key error rate, and no interaction in the key generation process, which avoids key leakage.
- 27 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Novel Physical Layer Key Generation Method Based on WGAN-GP Adversarial Autoencoder
The reciprocity of wireless channel between legitimate nodes is the premise of physical layer security key generation. Deep neural networks provide the non-linear transformation method to extract symmetric keys from reciprocal channel responses and show better freedom and performance than traditional methods. However, the hidden layer output in neural networks is unpredictable and the extracted high-dimensional features can not be estimated in advance, which is difficult to be applied to the key generation in the physical layer. In this paper, the key generation method based on WGAN-GP adversarial autoencoder is proposed to extract features efficiently between legitimate nodes, and the features can be fitted to the Gaussian distribution. Meanwhile, the Wasserstein distance and gradient penalty are applied in the game training to solve the gradient explosion. Compared with the PCA method, the proposed method has higher security key capacity, lower key error rate, and no interaction in the key generation process, which avoids key leakage.