Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Masoud Baghernejad has a total of 90 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Unveiling the Interfacial Dynamics of Crosslinked Biodegradable Polycaprolactone Solid Polymer Electrolytes and Li Metal During Lithium Plating and Stripping via Operando ATR‐FTIR Spectroscopy

    by Jian‐Fen Wang, Matthias Weiling, Felix Pfeiffer, Marian C. Stan, Martin Winter, Masoud Baghernejad

    Polycaprolactones (PCL) have gained attention as a biodegradable and environmentally sustainable solid polymer electrolyte (SPE) for solid‐state battery applications. While poly(ethylene oxide) (PEO) systems are widely studied, the interfacial mechanisms of PCL‐based SPEs in contact with Li metal remain insufficiently explored. In this work, operando attenuated total reflection Fourier‐transform infrared (ATR‐FTIR) spectroscopy was employed to monitor the chemical environment at the interface of Li metal and crosslinked PCL‐based SPEs (cl‐PCL 5 LiTFSI) during Li plating/stripping, enabling both spectral assignment and electrochemical comparison between the crosslinked and non‐crosslinked systems. During galvanostatic cycling experiments, cells with cl‐PCL 5 LiTFSI SPEs exhibited increased cycling stability compared to cells containing PCL 5 LiTFSI SPEs, which can be attributed to the enhanced mechanical strength of the polymer network. Overall, the results show the development of localized ordered PCL domains and the redistribution of TFSI − anion during Li plating/stripping, revealing the possible degradation and dynamic changes occurring at the SPE|Li metal interface. The phenomenon of interfacial evolution of the SPEs was visualized through converting specific characteristic bands of PCL and LiTFSI from operando spectra into penetration depth‐dependent band ratio maps.

  • Open Access

    Electrolyte Motion–Induced Salt Inhomogeneity (EMSI) Can Occur Across Cell Formats: A Mechanistic Study in Single-layer Pouch Cells and Mitigation Strategies

    by Hao-Chen Hsiao, Daniel Goldbach, Jiahao Li, Masoud Baghernejad, Alexander Adam, Thomas Waldmann, Johannes Wandt, Markus Hölzle

    Electrolyte-motion–induced salt inhomogeneity (EMSI) is increasingly recognized as a failure mode in fast-charging. However, its generality beyond large jelly-roll cells has remained unclear. In this work, we present this effect for the first time in single-layer pouch cells. EMSI arises whenever two conditions coincide: charge-induced pore-volume reduction with pore filling ratio >1 and strong through-plane salt polarization. We reproduce the reported EMSI fingerprint, a reversible, week-scale rise in ohmic resistance accompanied by rate-dependent capacity loss and use it as a diagnostic marker. Direct mapping by ion chromatography and ATR-FTIR spectroscopy reveals centimeter-scale LiPF₆ gradients, with up to ∼3× center-to-edge differences across 2.5 cm after ∼20 equivalent fast-charge cycles. These gradients require nearly a week to dissipate and coincides with edge-localized Li deposition. Their homogenization is tracked by a reversible drop in high-frequency resistance during the cell rest period. A coupled pseudo-3D electrochemical-fluid model reproduces the experimental trends and illustrates how the resistance evolves. Parameter scans of electrolyte amount, charge/discharge rate, temperature, and silicon content chart the onset conditions and motivate actionable mitigation strategies. Together, these results establish EMSI as a general design and testing challenge across cell formats whenever electrode stacks are mechanically constrained.


  • Open Access

    Modification of the Solid Electrolyte Interphase on SiGr Electrodes by a Prelithiation Method Using Passivated Lithium Metal Powder

    by Ekin Esen, Iratxe de Meatza, Martin Schmuck, Mohsen Padervand, Martin Winter, Elie Paillard, Masoud Baghernejad

    Negative electrode materials with high specific energy, such as SiGr, are essential to decrease battery cell weight and volume while allowing improved range and design flexibilities for electric vehicles. Among different SiGr anode prelithiation methods, the use of passivated lithium metal powder is discussed in terms of cell impedance and its effects on the interphase film formation on SiGr and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC‐811) electrodes with high mass loadings. Electrochemical impedance spectroscopy analyses show that a less resistive and more effective solid electrolyte interphase (SEI) forms upon prelithiation which also benefits the charge transfer at the SiGr electrode. Scanning electron microscopy images show a thicker interphase layer with less interstitial porosity on the prelithiated SiGr electrodes and a thinner cathode electrolyte interphase on NMC‐811 electrode as a result of the lower average cathode potential attained throughout cycling, in comparison with the cells without prelithiation. A more diverse SEI layer, richer in beneficial components such as LiF, is promoted by the prelithiation method as shown by X‐ray photoelectron spectroscopy with a sputtering depth of 100 nm. Finally, it is shown that the more robust SEI layer forming upon prelithiation requires less electrolyte consumption for repairing the SEI layer throughout long‐term cycling.


  • Comprehensive optical spectroscopy of solid-state polymer electrolytes: Harmonic and anharmonic vibrational activity and charge dynamics from terahertz to ultraviolet

    by Yuhao Meng, Jian-Fen Wang, Matthias Weiling, Wentao Zhang, Felix Pfeiffer, Lukas Goett-Zink, Tilman Kottke, Jijeesh Ravi Nair, Masoud Baghernejad, Dmitry Turchinovich, et al.

    We investigate the vibrational and electronic properties of solid-state polymer electrolytes (SPEs) using optical spectroscopy spanning an ultrabroadband range of frequencies extending from terahertz (THz) to ultraviolet (UV). The employed techniques include THz time-domain spectroscopy (THz-TDS), Fourier-transform infrared spectroscopy, and photometric IR–UV spectroscopy. Our study demonstrates that incorporating salts into the host polymer matrix to form an electrolyte gives rise to characteristic optical properties of SPEs, depending on the type, content, and concentration of the added salt, which we describe as follows. In the THz range, distinctive absorption bands are observed, which we attribute to THz-resonant vibrations of polymer chains. In contrast, sharp resonant absorption bands and lines due to IR-active vibrations of chemical bonds (inter- and intra-molecular vibrations) within the polymer chains and lithium salts are observed in the IR range. Density functional theory calculations were performed to provide insight into these vibrational properties of SPEs and helped to assign the relevant vibrational modes. In the UV range, we focus on characterizing the energy gap associated with transitions from bonding to antibonding states. Optical spectroscopy, as a powerful noninvasive characterization tool, thus provides valuable insights into the charge and molecular dynamics in SPEs. These insights are crucial for their technological applications and can support chemistry-based efforts to improve the properties of SPEs.


  • Open Access

    Multi‐Valent Cation Strategies for Controlling Interphase Chemistry at the Lithium Metal Anode

    by Peng Yan, Rui Xu, Matthias Weiling, Bixian Ying, Marian Cristian Stan, Christian Wölke, Masoud Baghernejad, Jia‐Qi Huang, Martin Winter, Peter Bieker, et al.

    The effectiveness of a solid electrolyte interphase (SEI) in lithium metal batteries (LMBs) is crucial for the reversible deposition and dissolution of lithium (Li). Herein, a multi‐valent cation (MVC) is proposed approach to enable superior LMB performance without increasing conducting salt concentration, thus reducing the cost and environmental footprint of LMBs. In this approach, a minimal amount of magnesium carbonate (MgCO 3 ) of 0.05 m is added to a lithium hexafluorophosphate (LiPF 6 ) based electrolyte, which effectively scavenges hydrogen fluoride (HF) generated from hydrolysis of LiPF 6 . Concurrently, the HF scavenging process dissolves MgCO 3 microparticles and releases Mg 2+ cations. It is noteworthy that multivalent Mg 2+ cations, due to their high charge density, enrich the electric double layer with anions that preferentially decompose to form an anion‐derived SEI. Consequently, the MVC approach facilitates enhanced reversibility of Li metal deposition and dissolution, as well as stable galvanostatic cycling of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)||Li cells. This approach provides a highly effective pathway for designing anion‐derived SEI, offering new insights into the control of Li metal interfaces.


  • Open Access

    Bifunctional Electrolyte Additive Enabling Simultaneous Interphase Formation on Both Electrodes in High‐Energy Lithium‐Ion Batteries

    by Ankita Das, Felix Pfeiffer, Anindityo Arifiadi, Matthias Weiling, Verena Küpers, Masoud Baghernejad, Martin Winter, Frank Glorius

    The development of next‐generation Lithium‐ion batteries (LIBs) to meet the demands of advancing technology and energy storage requires focus on the formation of effective interphases on both the positive and negative electrodes. Different promising approaches to facilitate effective interphase formation are already known Out of these, the incorporation of film‐forming electrolyte additives is a straight‐forward strategy to achieve this goal. In the presented study, a bifunctional electrolyte additive, (5‐methyl‐2‐oxo‐1,3‐dioxol‐4‐yl)methyl thiophene‐3‐carboxylate composed of two functional motifs, vinylene carbonate (VC) and thiophene, is reported. Upon LIB operation, the additive undergoes in situ splitting, forming a VC‐assisted solid electrolyte interphase (SEI) and a polythiophene‐based cathode electrolyte interphase (CEI) simultaneously. The electrochemical performance of the proposed additive is studied in 250 mAh NMC811||AG + 20% SiO x wound pouch cells, and shows considerable improvement in overall battery performance compared to cells with the baseline electrolyte. The additive's dual interphase formation is confirmed through a combination of advanced characterization techniques, including X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and operando shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS). This study introduces a new design strategy for a multifunctional electrolyte additive, providing a promising pathway to improve overall LIB's performance and lifetime by simultaneous stabilization of both electrodes through facilitated interphase formation.


  • Open Access

    Drawing from the Old‐The First Ever Sultone as Electrolyte Additive in High‐Voltage NMC811 || AG+SiOx Multilayer Pouch Cells

    by Matthias Weiling, Christian‐Timo Lechtenfeld, Silvan Stuckenberg, Felix Pfeiffer, Jian‐Fen Wang, Sascha Nowak, Verena Küpers, Masoud Baghernejad

    The addition of a small amount of silicon to the anode material is a widely used approach to increase the energy density of lithium‐ion batteries (LIBs). However, its (de‐)lithiation leads to volume changes, resulting in structural degradation and the formation of an insufficient solid‐electrolyte interphase (SEI), limiting the cycle life and electrochemical performance. Therefore, the formation of an effective SEI is imperative to overcome these challenges. Sulfur‐containing electrolyte additives are garnering attention due to their abundant supply and advantageous chemistry in LIBs. With 1,8‐naphthosultone (1,8‐NS) as an electrolyte additive, a notably enhanced electrochemical performance in high‐voltage NMC811 || artificial graphite(AG) + 20 % SiO x cells is observed. Employing advanced spectrometric and spectroscopic characterization techniques, complemented with theoretical calculations, the degradation products and pathways of 1,8‐NS in the cell are elucidated. This includes 1,8‐NS reduction, sultone ring opening, and chemical degradation with electrolyte solvent degradation products. The formation of these products is traced back to the SiO x anode, where an effective, layered SEI with various 1,8‐NS degradation products is formed. This SEI is suggested to exhibit improved mechanical and electrochemical parameters, resulting in the observed improvement of the electrochemical performance of the cells.


  • Open Access

    Molecular Insights into the Interfacial Phenomena at the Li Metal | Polymer Solid‐State Electrolyte in Anode‐Free Configuration During Li Plating‐Stripping via Advanced Operando ATR‐FTIR Spectroscopy

    by Jian‐Fen Wang, Matthias Weiling, Felix Pfeiffer, Kun‐Ling Liu, Masoud Baghernejad

    Solid‐state batteries are regarded as safe and high‐energy‐density candidates for next‐generation energy storage. However, gaining a mechanistic understanding of the interfacial phenomena under real electrochemically working conditions remains a major challenge for cells containing solid‐state electrolytes. This work presents an in‐house built attenuated total reflection fourier‐transform infrared (ATR‐FTIR) spectroscopy cell equipped with an internal temperature‐control unit. This cell is used for operando characterization of interfacial processes between plated Li and polymer during Li plating/stripping. As a proof of concept, a polymer electrolyte (cr‐PEO10LiTFSI) containing poly(ethylene oxide), Li bis‐(trifluoromethanesulfonyl)imide and crosslink‐initiator benzophenone (BP) is introduced on a copper mesh as current collector at 60 °C. The developed ATR‐FTIR spectroscopy setup provides detailed insights into the electrolyte degradation and reveals the crystallinity transformation of PEO at the interface during plating. Moreover, for the first time, the degradation of BP is observed. This compound, often overlooked in electrolyte systems due to its low concentration, is found to play a significant role in the interfacial electrochemistry process. Overall, this study provides a comprehensive overview of the characterization on the PEO electrolyte‐lithium metal interface and introduces a novel perspective on the reaction of BP as a crosslinking initiator in the solid‐state batteries.


  • Open Access

    Interfacial Potentiodynamics of “Water-in-Salt” Electrolytes in Aqueous Lithium-Ion Batteries Using Nonlinear Spectroscopy and Molecular Simulations

    by Bruno Schmelz, Kazem Zhour, Susanna Krämer, Mariano Grünebaum, Diddo Diddens, Björn Braunschweig, Hadrián Montes-Campos, Masoud Baghernejad


  • Open Access

    Comprehensive Study on Cell Components in High‐Voltage Pouch Cells with Lithium Perchlorate: Decomposition, Transesterification, Chlorination, Deposition, and Self‐Discharge

    by Matthias Weiling, Felix Pfeiffer, Christian Lechtenfeld, Silvan Stuckenberg, Nick Fehlings, Lars Frankenstein, Verena Küpers, Jian‐Fen Wang, Sascha Nowak, Masoud Baghernejad

    Battery development has traditionally focused on high energy and long lifetime cells, but there is now a shift towards their sustainability and safety. One example of this trend is the search for fluorine‐free conductive salts. The overwhelming majority of lithium‐ion conductive salts contain fluorine, which is critical regarding their environmental impact, sustainability, and toxicology. In this study, we perform a comprehensive investigation of the performance and aging mechanisms of cell components with LiClO4 as conductive salt in high‐voltage NMC622‖Graphite pouch cells. The cells containing LiClO4 show poorer electrochemical performance compared to their LiPF6 equivalents. However, to the best of our knowledge, a mechanistic understanding of the effect of LiClO4 on the aging of electrode and electrolyte components for high‐voltage cells is largely missing. Developing such an understanding will pave the way toward designing alternative salts to LiPF6, ultimately leading to fluorine‐free and more sustainable battery cells. Our results show, that the chlorination of ethyl methyl carbonate at both methyl and ethyl groups and the formation of large (Liw)AlxOyClz composite deposits on the cathode surface result from perchlorate degradation at the cathode. This leads to increased cell resistance, reduced capacity retention, and accelerated degradation of the LiClO4‐containing electrolytes.