Jian‐Fen Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jian‐Fen Wang has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Felix Pfeiffer
Helmholtz Institute Münster: Ionics in Energy Storage (IMD‐4 / HI MS) Forschungszentrum Jülich GmbH Corrensstrasse 48 Münster Germany
5 shared publications - Masoud Baghernejad
Helmholtz Institute Münster: Ionics in Energy Storage (IMD‐4 / HI MS) Forschungszentrum Jülich GmbH Corrensstrasse 48 Münster Germany
4 shared publications - Matthias Weiling
Helmholtz Institute Münster: Ionics in Energy Storage (IMD‐4 / HI MS) Forschungszentrum Jülich GmbH Corrensstrasse 48 Münster Germany
4 shared publications Masoud Baghernejad
IEK-12, Forschungszentrum Jülich GmbH, Helmholtz Institute Münster
3 shared publicationsMatthias Weiling
Helmholtz Institute Münster
3 shared publications- Christian-Timo Lechtenfeld
MEET Battery Research Center Münster University of Münster Corrensstraße 46 48149 Münster Germany
2 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by Wiley in Advanced Science
Unveiling the Interfacial Dynamics of Crosslinked Biodegradable Polycaprolactone Solid Polymer Electrolytes and Li Metal During Lithium Plating and Stripping via Operando ATR‐FTIR Spectroscopy
Polycaprolactones (PCL) have gained attention as a biodegradable and environmentally sustainable solid polymer electrolyte (SPE) for solid‐state battery applications. While poly(ethylene oxide) (PEO) systems are widely studied, the interfacial mechanisms of PCL‐based SPEs in contact with Li metal remain insufficiently explored. In this work, operando attenuated total reflection Fourier‐transform infrared (ATR‐FTIR) spectroscopy was employed to monitor the chemical environment at the interface of Li metal and crosslinked PCL‐based SPEs (cl‐PCL 5 LiTFSI) during Li plating/stripping, enabling both spectral assignment and electrochemical comparison between the crosslinked and non‐crosslinked systems. During galvanostatic cycling experiments, cells with cl‐PCL 5 LiTFSI SPEs exhibited increased cycling stability compared to cells containing PCL 5 LiTFSI SPEs, which can be attributed to the enhanced mechanical strength of the polymer network. Overall, the results show the development of localized ordered PCL domains and the redistribution of TFSI − anion during Li plating/stripping, revealing the possible degradation and dynamic changes occurring at the SPE|Li metal interface. The phenomenon of interfacial evolution of the SPEs was visualized through converting specific characteristic bands of PCL and LiTFSI from operando spectra into penetration depth‐dependent band ratio maps.
- 16 September 2026
- Published by Wiley in Advanced Science
Open AccessUnveiling the Interfacial Dynamics of Crosslinked Biodegradable Polycaprolactone Solid Polymer Electrolytes and Li Metal During Lithium Plating and Stripping via Operando ATR‐FTIR Spectroscopy
Polycaprolactones (PCL) have gained attention as a biodegradable and environmentally sustainable solid polymer electrolyte (SPE) for solid‐state battery applications. While poly(ethylene oxide) (PEO) systems are widely studied, the interfacial mechanisms of PCL‐based SPEs in contact with Li metal remain insufficiently explored. In this work, operando attenuated total reflection Fourier‐transform infrared (ATR‐FTIR) spectroscopy was employed to monitor the chemical environment at the interface of Li metal and crosslinked PCL‐based SPEs (cl‐PCL 5 LiTFSI) during Li plating/stripping, enabling both spectral assignment and electrochemical comparison between the crosslinked and non‐crosslinked systems. During galvanostatic cycling experiments, cells with cl‐PCL 5 LiTFSI SPEs exhibited increased cycling stability compared to cells containing PCL 5 LiTFSI SPEs, which can be attributed to the enhanced mechanical strength of the polymer network. Overall, the results show the development of localized ordered PCL domains and the redistribution of TFSI − anion during Li plating/stripping, revealing the possible degradation and dynamic changes occurring at the SPE|Li metal interface. The phenomenon of interfacial evolution of the SPEs was visualized through converting specific characteristic bands of PCL and LiTFSI from operando spectra into penetration depth‐dependent band ratio maps.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (8) , 3401
Operando ATR-FTIR Spectroscopic Investigation of the Li|Solid Polymer Electrolyte Interphase in Anode-Free Lithium Metal Batteries
Anode-free lithium metal batteries (AFLMBs) are regarded as a promising solution to tackle the rising demand for high energy density, safe and low-cost alternatives to lithium ion batteries. [1, 2] However, the electrodeposition of Li metal from the cathode active material onto the bare current collector still pose challenges with respect to high surface area lithium (HASAL) formation, interphase evolution and lithium metal stability in liquid electrolytes. [3] Solid polymer electrolytes (SPEs) have emerged as potential alternatives to liquid electrolytes due to their excellent interfacial contact, flexibility in modification and the ability of HASAL suppression. [4] Despite these advantages, their inherent conformal contact with the electrode poses challenges for post-mortem interfacial analysis, as the separation and sample preparation processes carry a high risk of damaging and contaminating the interphase morphology. Accordingly, real-time characterization of the interfacial dynamics and chemical evolution of the SPEs is essential for advancing the understanding of the SPEs batteries. In this work, we present an in-house built Attenuated Total Reflection Fourier-Transform Infrared (ATR-FTIR) spectroscopy cell equipped with an internal temperature-control unit to gain insights into the real-time evolution (operando) of the interfacial dynamics and chemical changes during Li electrodeposition using commonly used polymers (such as PEO, and PCL) as a benchmark SPEs. [5] The developed ATR-FTIR spectroscopy setup provides detailed insights into the evolution of the Li|SPE interphase including the crystallinity transformation of the polymer and the degradation of the crosslink initiator (Benzophenone) during Li deposition. These interfacial dynamics play a decisive role in influencing the SPEs batteries behavior and lifespan. Overall, this study provides a comprehensive overview of the characterization of the Li|SPE interphase and introduces a novel perspective on the possible failure mechanism of the SPEs application in AFLMBs. References: [1] Ingber, Tjark TK, et al. "Elucidating the lithium deposition behavior in open-porous copper micro-foam negative electrodes for zero-excess lithium metal batteries." Journal of Materials Chemistry A 11.33 (2023): 17828-17840. [2] Neudecker, B. J., N. J. Dudney, and J. B. Bates. "“Lithium‐Free” thin‐film battery with in situ plated Li anode." Journal of the Electrochemical Society 147.2 (2000): 517. [3] Genovese, Matthew, et al. "Measuring the coulombic efficiency of lithium metal cycling in anode-free lithium metal batteries." Journal of The Electrochemical Society 165.14 (2018): A3321. [4] Nair, Jijeesh Ravi, et al. "Lithium metal polymer electrolyte batteries: opportunities and challenges." The Electrochemical Society Interface 28.2 (2019): 55. [5] Wang, Jian‐Fen, et al. "Molecular Insights into the Interfacial Phenomena at the Li Metal| Polymer Solid‐State Electrolyte in Anode‐Free Configuration During Li Plating‐Stripping via Advanced Operando ATR‐FTIR Spectroscopy." Advanced Energy Materials 15.18 (2025): 2404569.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (8) , 3401
Operando ATR-FTIR Spectroscopic Investigation of the Li|Solid Polymer Electrolyte Interphase in Anode-Free Lithium Metal Batteries
Anode-free lithium metal batteries (AFLMBs) are regarded as a promising solution to tackle the rising demand for high energy density, safe and low-cost alternatives to lithium ion batteries. [1, 2] However, the electrodeposition of Li metal from the cathode active material onto the bare current collector still pose challenges with respect to high surface area lithium (HASAL) formation, interphase evolution and lithium metal stability in liquid electrolytes. [3] Solid polymer electrolytes (SPEs) have emerged as potential alternatives to liquid electrolytes due to their excellent interfacial contact, flexibility in modification and the ability of HASAL suppression. [4] Despite these advantages, their inherent conformal contact with the electrode poses challenges for post-mortem interfacial analysis, as the separation and sample preparation processes carry a high risk of damaging and contaminating the interphase morphology. Accordingly, real-time characterization of the interfacial dynamics and chemical evolution of the SPEs is essential for advancing the understanding of the SPEs batteries. In this work, we present an in-house built Attenuated Total Reflection Fourier-Transform Infrared (ATR-FTIR) spectroscopy cell equipped with an internal temperature-control unit to gain insights into the real-time evolution (operando) of the interfacial dynamics and chemical changes during Li electrodeposition using commonly used polymers (such as PEO, and PCL) as a benchmark SPEs. [5] The developed ATR-FTIR spectroscopy setup provides detailed insights into the evolution of the Li|SPE interphase including the crystallinity transformation of the polymer and the degradation of the crosslink initiator (Benzophenone) during Li deposition. These interfacial dynamics play a decisive role in influencing the SPEs batteries behavior and lifespan. Overall, this study provides a comprehensive overview of the characterization of the Li|SPE interphase and introduces a novel perspective on the possible failure mechanism of the SPEs application in AFLMBs. References: [1] Ingber, Tjark TK, et al. "Elucidating the lithium deposition behavior in open-porous copper micro-foam negative electrodes for zero-excess lithium metal batteries." Journal of Materials Chemistry A 11.33 (2023): 17828-17840. [2] Neudecker, B. J., N. J. Dudney, and J. B. Bates. "“Lithium‐Free” thin‐film battery with in situ plated Li anode." Journal of the Electrochemical Society 147.2 (2000): 517. [3] Genovese, Matthew, et al. "Measuring the coulombic efficiency of lithium metal cycling in anode-free lithium metal batteries." Journal of The Electrochemical Society 165.14 (2018): A3321. [4] Nair, Jijeesh Ravi, et al. "Lithium metal polymer electrolyte batteries: opportunities and challenges." The Electrochemical Society Interface 28.2 (2019): 55. [5] Wang, Jian‐Fen, et al. "Molecular Insights into the Interfacial Phenomena at the Li Metal| Polymer Solid‐State Electrolyte in Anode‐Free Configuration During Li Plating‐Stripping via Advanced Operando ATR‐FTIR Spectroscopy." Advanced Energy Materials 15.18 (2025): 2404569.
- 10 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (14)
Comprehensive optical spectroscopy of solid-state polymer electrolytes: Harmonic and anharmonic vibrational activity and charge dynamics from terahertz to ultraviolet
We investigate the vibrational and electronic properties of solid-state polymer electrolytes (SPEs) using optical spectroscopy spanning an ultrabroadband range of frequencies extending from terahertz (THz) to ultraviolet (UV). The employed techniques include THz time-domain spectroscopy (THz-TDS), Fourier-transform infrared spectroscopy, and photometric IR–UV spectroscopy. Our study demonstrates that incorporating salts into the host polymer matrix to form an electrolyte gives rise to characteristic optical properties of SPEs, depending on the type, content, and concentration of the added salt, which we describe as follows. In the THz range, distinctive absorption bands are observed, which we attribute to THz-resonant vibrations of polymer chains. In contrast, sharp resonant absorption bands and lines due to IR-active vibrations of chemical bonds (inter- and intra-molecular vibrations) within the polymer chains and lithium salts are observed in the IR range. Density functional theory calculations were performed to provide insight into these vibrational properties of SPEs and helped to assign the relevant vibrational modes. In the UV range, we focus on characterizing the energy gap associated with transitions from bonding to antibonding states. Optical spectroscopy, as a powerful noninvasive characterization tool, thus provides valuable insights into the charge and molecular dynamics in SPEs. These insights are crucial for their technological applications and can support chemistry-based efforts to improve the properties of SPEs.
- 10 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (14)
Comprehensive optical spectroscopy of solid-state polymer electrolytes: Harmonic and anharmonic vibrational activity and charge dynamics from terahertz to ultraviolet
We investigate the vibrational and electronic properties of solid-state polymer electrolytes (SPEs) using optical spectroscopy spanning an ultrabroadband range of frequencies extending from terahertz (THz) to ultraviolet (UV). The employed techniques include THz time-domain spectroscopy (THz-TDS), Fourier-transform infrared spectroscopy, and photometric IR–UV spectroscopy. Our study demonstrates that incorporating salts into the host polymer matrix to form an electrolyte gives rise to characteristic optical properties of SPEs, depending on the type, content, and concentration of the added salt, which we describe as follows. In the THz range, distinctive absorption bands are observed, which we attribute to THz-resonant vibrations of polymer chains. In contrast, sharp resonant absorption bands and lines due to IR-active vibrations of chemical bonds (inter- and intra-molecular vibrations) within the polymer chains and lithium salts are observed in the IR range. Density functional theory calculations were performed to provide insight into these vibrational properties of SPEs and helped to assign the relevant vibrational modes. In the UV range, we focus on characterizing the energy gap associated with transitions from bonding to antibonding states. Optical spectroscopy, as a powerful noninvasive characterization tool, thus provides valuable insights into the charge and molecular dynamics in SPEs. These insights are crucial for their technological applications and can support chemistry-based efforts to improve the properties of SPEs.
- Open Access
Drawing from the Old‐The First Ever Sultone as Electrolyte Additive in High‐Voltage NMC811 || AG+SiOx Multilayer Pouch Cells
The addition of a small amount of silicon to the anode material is a widely used approach to increase the energy density of lithium‐ion batteries (LIBs). However, its (de‐)lithiation leads to volume changes, resulting in structural degradation and the formation of an insufficient solid‐electrolyte interphase (SEI), limiting the cycle life and electrochemical performance. Therefore, the formation of an effective SEI is imperative to overcome these challenges. Sulfur‐containing electrolyte additives are garnering attention due to their abundant supply and advantageous chemistry in LIBs. With 1,8‐naphthosultone (1,8‐NS) as an electrolyte additive, a notably enhanced electrochemical performance in high‐voltage NMC811 || artificial graphite(AG) + 20 % SiO x cells is observed. Employing advanced spectrometric and spectroscopic characterization techniques, complemented with theoretical calculations, the degradation products and pathways of 1,8‐NS in the cell are elucidated. This includes 1,8‐NS reduction, sultone ring opening, and chemical degradation with electrolyte solvent degradation products. The formation of these products is traced back to the SiO x anode, where an effective, layered SEI with various 1,8‐NS degradation products is formed. This SEI is suggested to exhibit improved mechanical and electrochemical parameters, resulting in the observed improvement of the electrochemical performance of the cells.
Open AccessDrawing from the Old‐The First Ever Sultone as Electrolyte Additive in High‐Voltage NMC811 || AG+SiOx Multilayer Pouch Cells
The addition of a small amount of silicon to the anode material is a widely used approach to increase the energy density of lithium‐ion batteries (LIBs). However, its (de‐)lithiation leads to volume changes, resulting in structural degradation and the formation of an insufficient solid‐electrolyte interphase (SEI), limiting the cycle life and electrochemical performance. Therefore, the formation of an effective SEI is imperative to overcome these challenges. Sulfur‐containing electrolyte additives are garnering attention due to their abundant supply and advantageous chemistry in LIBs. With 1,8‐naphthosultone (1,8‐NS) as an electrolyte additive, a notably enhanced electrochemical performance in high‐voltage NMC811 || artificial graphite(AG) + 20 % SiO x cells is observed. Employing advanced spectrometric and spectroscopic characterization techniques, complemented with theoretical calculations, the degradation products and pathways of 1,8‐NS in the cell are elucidated. This includes 1,8‐NS reduction, sultone ring opening, and chemical degradation with electrolyte solvent degradation products. The formation of these products is traced back to the SiO x anode, where an effective, layered SEI with various 1,8‐NS degradation products is formed. This SEI is suggested to exhibit improved mechanical and electrochemical parameters, resulting in the observed improvement of the electrochemical performance of the cells.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (8) , 1135
Unveiling the Interfacial Composition of Li-Metal | Polymer Electrolytes during Lithium Plating-Stripping Employing Operando ATR-FTIR Spectroscopy
The Li-metal interphases formed in contact with solid-state (polymer) electrolytes (SSE) during electrochemical plating and stripping influences remarkably the lifespan and safety of solid-state batteries (SSBs). Effective interphases play a crucial role in impeding the continuous decomposition of electrolytes, the growth of dendrites, and consequently, enhancing the overall battery performance. However, the investigation of interphases of solid electrolytes remains a challenge, necessitating development of advanced techniques and methodologies. Moreover, highly sensitive instruments are demanded to detect the extremely thin interphases. Furthermore, real-time monitoring experimentations are needed to capture the interfacial dynamics. Addressing the interphase in solid-state battery under real working conditions is another major complication regarding the signal acquisition of the buried interfacial products between non-transparent electrodes. As a result, there are very limited studies of such a kind, which make our state-of-the-art understanding of interfacial process in SSBs very poor. Towards addressing this, we have developed and operando spectroscopy technique based-on Attenuated Total Reflection Fourier-Transform Infrared (ATR-FTIR) for real time monitoring of interphase composition between Li-metal and solid polymer electrolytes. ATR-FTIR spectroscopy is a powerful analytical technique that offers several significant advantages, including rapid data acquisition, applicability for various sample forms, and high sensitivity to trace even small amounts of substances non-destructively. The preservation of the original interphase composition is crucial for the characterization under real working conditions. Moreover, it is rather straightforward to combine the ATR-FTIR measurements with the electrochemical system by utilizing specifically designed spectro-electrochemical cells. Our team has been developing the advanced ATR-FTIR set-up for operando interphase analysis, which has already worked successfully for characterizing the interphases of liquid electrolyte system on Si and Li-metal electrode1. Based on the successful implementation of this technique, we further developed the setup for the analysis the interphases on solid-state electrolytes with lithium metal in anode-free configuration. In our investigation, a well-known system comprising polyethylene oxide (PEO) polymer, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and benzophenone as photoinitiated crosslinker, was chosen for use as a proof of concept. PEO is one of the most extensively used polymer for SSE, its conductivity at room temperature is however relatively low, as its optimated usage temperature is above 60oC. To ensure that our experimental setup remains comparable to contemporary research on PEO electrolytes, a temperature control system was implemented in the design of our spectro-electrochemical cell, besides, pressure controlling is also incorporated to enhance internal material adhesion. Furthermore, the ATR-FTIR instrument is equipped with adjustable incident angles for the IR beam, enabling the characterization of the interphases at different penetration depths. In terms of cell internal configuration, an anode-free setup was opted, which not only facilitates penetration of infrared beam, but is also regarded as a promising configuration for next-generation SSBs. Following the acquisition of IR spectrum during the Li plating-stripping process, it was observed that certain bands exhibited intensity variations, as a result of dynamicity in interfacial composition. Notably, some prominent variations were observed in the IR spectrum around 1500-1750 cm-1, primarily originated from bands associated with benzophenone. The reactions of the crosslinker may undergo within the electrolyte system during electrochemical process are often overlooked, which is due to the lack of techniques with the ability to monitor these reactions. The presented study outlines the need for advanced operando methods to increase the understanding of interphases formed by solid-electrolytes. In future perspectives, efforts will be directed towards further optimizing the cell setups and with the aim of applying this technique to investigate interphases and aging mechanisms in various solid electrolyte systems. Reference: Weiling, Matthias, et al. "Mechanistic Understanding of Additive Reductive Degradation and SEI Formation in High‐Voltage NMC811|| SiOx‐Containing Cells via Operando ATR‐FTIR Spectroscopy." Advanced Energy Materials5 (2024): 2303568.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (8) , 1135
Unveiling the Interfacial Composition of Li-Metal | Polymer Electrolytes during Lithium Plating-Stripping Employing Operando ATR-FTIR Spectroscopy
The Li-metal interphases formed in contact with solid-state (polymer) electrolytes (SSE) during electrochemical plating and stripping influences remarkably the lifespan and safety of solid-state batteries (SSBs). Effective interphases play a crucial role in impeding the continuous decomposition of electrolytes, the growth of dendrites, and consequently, enhancing the overall battery performance. However, the investigation of interphases of solid electrolytes remains a challenge, necessitating development of advanced techniques and methodologies. Moreover, highly sensitive instruments are demanded to detect the extremely thin interphases. Furthermore, real-time monitoring experimentations are needed to capture the interfacial dynamics. Addressing the interphase in solid-state battery under real working conditions is another major complication regarding the signal acquisition of the buried interfacial products between non-transparent electrodes. As a result, there are very limited studies of such a kind, which make our state-of-the-art understanding of interfacial process in SSBs very poor. Towards addressing this, we have developed and operando spectroscopy technique based-on Attenuated Total Reflection Fourier-Transform Infrared (ATR-FTIR) for real time monitoring of interphase composition between Li-metal and solid polymer electrolytes. ATR-FTIR spectroscopy is a powerful analytical technique that offers several significant advantages, including rapid data acquisition, applicability for various sample forms, and high sensitivity to trace even small amounts of substances non-destructively. The preservation of the original interphase composition is crucial for the characterization under real working conditions. Moreover, it is rather straightforward to combine the ATR-FTIR measurements with the electrochemical system by utilizing specifically designed spectro-electrochemical cells. Our team has been developing the advanced ATR-FTIR set-up for operando interphase analysis, which has already worked successfully for characterizing the interphases of liquid electrolyte system on Si and Li-metal electrode1. Based on the successful implementation of this technique, we further developed the setup for the analysis the interphases on solid-state electrolytes with lithium metal in anode-free configuration. In our investigation, a well-known system comprising polyethylene oxide (PEO) polymer, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and benzophenone as photoinitiated crosslinker, was chosen for use as a proof of concept. PEO is one of the most extensively used polymer for SSE, its conductivity at room temperature is however relatively low, as its optimated usage temperature is above 60oC. To ensure that our experimental setup remains comparable to contemporary research on PEO electrolytes, a temperature control system was implemented in the design of our spectro-electrochemical cell, besides, pressure controlling is also incorporated to enhance internal material adhesion. Furthermore, the ATR-FTIR instrument is equipped with adjustable incident angles for the IR beam, enabling the characterization of the interphases at different penetration depths. In terms of cell internal configuration, an anode-free setup was opted, which not only facilitates penetration of infrared beam, but is also regarded as a promising configuration for next-generation SSBs. Following the acquisition of IR spectrum during the Li plating-stripping process, it was observed that certain bands exhibited intensity variations, as a result of dynamicity in interfacial composition. Notably, some prominent variations were observed in the IR spectrum around 1500-1750 cm-1, primarily originated from bands associated with benzophenone. The reactions of the crosslinker may undergo within the electrolyte system during electrochemical process are often overlooked, which is due to the lack of techniques with the ability to monitor these reactions. The presented study outlines the need for advanced operando methods to increase the understanding of interphases formed by solid-electrolytes. In future perspectives, efforts will be directed towards further optimizing the cell setups and with the aim of applying this technique to investigate interphases and aging mechanisms in various solid electrolyte systems. Reference: Weiling, Matthias, et al. "Mechanistic Understanding of Additive Reductive Degradation and SEI Formation in High‐Voltage NMC811|| SiOx‐Containing Cells via Operando ATR‐FTIR Spectroscopy." Advanced Energy Materials5 (2024): 2303568.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (7) , 925
Observing Real-Time SEI Formation on Silicon(-containing) Anodes By Operando ATR-FTIR Spectroscopy
Increasing the silicon content of anodes is a promising approach to increase the energy density of lithium-ion batteries, due to its notably higher gravimetric capacity compared to state-of-the-art graphite. However, severe volume expansion during lithiation and volume contraction during delithiation cause particle pulverization. This leads to rapid capacity fading, short cycle-life, and ongoing electrolyte consumption, which is further accompanied by continuous electrolyte consumption for solid-electrolyte interphase (SEI) (re-)formation. In order to overcome the previous mentioned challenges, film forming electrolyte additives can be utilized to tune the interphase properties. In this study the effect of a sulfur-containing additive, 2-Sulfobenzoic anhydride (2-SBA) as an SEI-forming electrolyte additive was investigated through complementary theoretical, experimental, and operando techniques.[1] With linear sweep voltammetry, supported by density functional theory calculations, indicate the reduction reaction of 2-SBA on the anode, which may lead to SEI formation. The electrochemical performance of high-voltage NMC811||AG+20%SiOx (4.5 – 2.8 V) multilayer pouch cells was investigated by means of galvanostatic charge/discharge cycling. These exhibit a lifetime of 65 cycles (until 80% state-of-health) with the baseline electrolyte (1 M LiPF6 in EC/EMC) without additives, whereas cells containing the optimizing electrolyte formulation with 2-SBA exhibit a cycle life of 105 cycles, corresponding to an increase of +60%. Furthermore, with 2-SBA the capacity retention of the cells is kept on a constant level of >99.9%, whereas a decreasing capacity retention is observed without 2-SBA. Further improvements of the cell cycle-life are achieved by the combination of 2-SBA with lithium difluorophosphate (LiDFP), a common high-voltage electrolyte additive, increasing the cycle-life to 165 cycles (+146%). Interestingly, LiDFP alone is not able to increase the cycle-life significantly (90 cycles, +38%), but also leads to lower and non-constant capacity retention. This indicates a beneficial purpose-selective approach, which is found to be superior to cells with fluoroethylene carbonate (63 cycles, -3%) or vinylene carbonate (116 cycles, +78%) as state-of-the-art electrolyte additives. Thus, the analysis indicates a beneficial effect of 2-SBA on SEI formation on silicon-containing anodes, which is further analyzed by operando attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Operando ATR-FTIR spectroscopy is a powerful technique to study the composition of interphases, as the interfering signals of i.e. bulk electrolyte species are minimized.[2] The IR permeability of crystalline silicon enables probing the SEI with the internal reflection mode. Furthermore, depth-dependent spectra from 0.1 to about 2 μm can be obtained by variation of the incident angle of the IR beam, enabling depth-profiling of the SEI from the electrode towards bulk electrolyte. Based on the obtained results we proposed an interphase model, where the 2-SBA additive is reduced, ring-opened, and accumulated on the silicon surface. By combination with an ion chromatography technique, different 2-SBA reaction products after reduction are identified, including products from electrolyte solvent degradation. Transferring this interphase model to composite electrodes containing graphite and SiOx particles, the identified organic decomposition products of 2-SBA can be considered beneficial to improve the cycle-life and performance of Si-containing anodes in high-voltage lithium-ion batteries. [1] M. Weiling, C. Lechtenfeld, F. Pfeiffer, L. Frankenstein, D. Diddens, J.-F. Wang, S. Nowak, M. Baghernejad, Mechanistic Understanding of Additive Reductive Degradation and SEI Formation in High-Voltage NMC811||SiOx-Containing Cells via Operando ATR-FTIR Spectroscopy. Adv. Energy Mater. 2024, 14, 2303568. https://doi.org/10.1002/aenm.202303568 [2] M. Weiling, F. Pfeiffer, M. Baghernejad, Vibrational Spectroscopy Insight into the Electrode|electrolyte Interface/Interphase in Lithium Batteries. Adv. Energy Mater. 2022, 12, 2202504. https://doi.org/10.1002/aenm.202202504
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (7) , 925
Observing Real-Time SEI Formation on Silicon(-containing) Anodes By Operando ATR-FTIR Spectroscopy
Increasing the silicon content of anodes is a promising approach to increase the energy density of lithium-ion batteries, due to its notably higher gravimetric capacity compared to state-of-the-art graphite. However, severe volume expansion during lithiation and volume contraction during delithiation cause particle pulverization. This leads to rapid capacity fading, short cycle-life, and ongoing electrolyte consumption, which is further accompanied by continuous electrolyte consumption for solid-electrolyte interphase (SEI) (re-)formation. In order to overcome the previous mentioned challenges, film forming electrolyte additives can be utilized to tune the interphase properties. In this study the effect of a sulfur-containing additive, 2-Sulfobenzoic anhydride (2-SBA) as an SEI-forming electrolyte additive was investigated through complementary theoretical, experimental, and operando techniques.[1] With linear sweep voltammetry, supported by density functional theory calculations, indicate the reduction reaction of 2-SBA on the anode, which may lead to SEI formation. The electrochemical performance of high-voltage NMC811||AG+20%SiOx (4.5 – 2.8 V) multilayer pouch cells was investigated by means of galvanostatic charge/discharge cycling. These exhibit a lifetime of 65 cycles (until 80% state-of-health) with the baseline electrolyte (1 M LiPF6 in EC/EMC) without additives, whereas cells containing the optimizing electrolyte formulation with 2-SBA exhibit a cycle life of 105 cycles, corresponding to an increase of +60%. Furthermore, with 2-SBA the capacity retention of the cells is kept on a constant level of >99.9%, whereas a decreasing capacity retention is observed without 2-SBA. Further improvements of the cell cycle-life are achieved by the combination of 2-SBA with lithium difluorophosphate (LiDFP), a common high-voltage electrolyte additive, increasing the cycle-life to 165 cycles (+146%). Interestingly, LiDFP alone is not able to increase the cycle-life significantly (90 cycles, +38%), but also leads to lower and non-constant capacity retention. This indicates a beneficial purpose-selective approach, which is found to be superior to cells with fluoroethylene carbonate (63 cycles, -3%) or vinylene carbonate (116 cycles, +78%) as state-of-the-art electrolyte additives. Thus, the analysis indicates a beneficial effect of 2-SBA on SEI formation on silicon-containing anodes, which is further analyzed by operando attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Operando ATR-FTIR spectroscopy is a powerful technique to study the composition of interphases, as the interfering signals of i.e. bulk electrolyte species are minimized.[2] The IR permeability of crystalline silicon enables probing the SEI with the internal reflection mode. Furthermore, depth-dependent spectra from 0.1 to about 2 μm can be obtained by variation of the incident angle of the IR beam, enabling depth-profiling of the SEI from the electrode towards bulk electrolyte. Based on the obtained results we proposed an interphase model, where the 2-SBA additive is reduced, ring-opened, and accumulated on the silicon surface. By combination with an ion chromatography technique, different 2-SBA reaction products after reduction are identified, including products from electrolyte solvent degradation. Transferring this interphase model to composite electrodes containing graphite and SiOx particles, the identified organic decomposition products of 2-SBA can be considered beneficial to improve the cycle-life and performance of Si-containing anodes in high-voltage lithium-ion batteries. [1] M. Weiling, C. Lechtenfeld, F. Pfeiffer, L. Frankenstein, D. Diddens, J.-F. Wang, S. Nowak, M. Baghernejad, Mechanistic Understanding of Additive Reductive Degradation and SEI Formation in High-Voltage NMC811||SiOx-Containing Cells via Operando ATR-FTIR Spectroscopy. Adv. Energy Mater. 2024, 14, 2303568. https://doi.org/10.1002/aenm.202303568 [2] M. Weiling, F. Pfeiffer, M. Baghernejad, Vibrational Spectroscopy Insight into the Electrode|electrolyte Interface/Interphase in Lithium Batteries. Adv. Energy Mater. 2022, 12, 2202504. https://doi.org/10.1002/aenm.202202504
- Open Access
- 13 November 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (4)
Comprehensive Study on Cell Components in High‐Voltage Pouch Cells with Lithium Perchlorate: Decomposition, Transesterification, Chlorination, Deposition, and Self‐Discharge
Battery development has traditionally focused on high energy and long lifetime cells, but there is now a shift towards their sustainability and safety. One example of this trend is the search for fluorine‐free conductive salts. The overwhelming majority of lithium‐ion conductive salts contain fluorine, which is critical regarding their environmental impact, sustainability, and toxicology. In this study, we perform a comprehensive investigation of the performance and aging mechanisms of cell components with LiClO4 as conductive salt in high‐voltage NMC622‖Graphite pouch cells. The cells containing LiClO4 show poorer electrochemical performance compared to their LiPF6 equivalents. However, to the best of our knowledge, a mechanistic understanding of the effect of LiClO4 on the aging of electrode and electrolyte components for high‐voltage cells is largely missing. Developing such an understanding will pave the way toward designing alternative salts to LiPF6, ultimately leading to fluorine‐free and more sustainable battery cells. Our results show, that the chlorination of ethyl methyl carbonate at both methyl and ethyl groups and the formation of large (Liw)AlxOyClz composite deposits on the cathode surface result from perchlorate degradation at the cathode. This leads to increased cell resistance, reduced capacity retention, and accelerated degradation of the LiClO4‐containing electrolytes.
- 13 November 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (4)
Open AccessComprehensive Study on Cell Components in High‐Voltage Pouch Cells with Lithium Perchlorate: Decomposition, Transesterification, Chlorination, Deposition, and Self‐Discharge
Battery development has traditionally focused on high energy and long lifetime cells, but there is now a shift towards their sustainability and safety. One example of this trend is the search for fluorine‐free conductive salts. The overwhelming majority of lithium‐ion conductive salts contain fluorine, which is critical regarding their environmental impact, sustainability, and toxicology. In this study, we perform a comprehensive investigation of the performance and aging mechanisms of cell components with LiClO4 as conductive salt in high‐voltage NMC622‖Graphite pouch cells. The cells containing LiClO4 show poorer electrochemical performance compared to their LiPF6 equivalents. However, to the best of our knowledge, a mechanistic understanding of the effect of LiClO4 on the aging of electrode and electrolyte components for high‐voltage cells is largely missing. Developing such an understanding will pave the way toward designing alternative salts to LiPF6, ultimately leading to fluorine‐free and more sustainable battery cells. Our results show, that the chlorination of ethyl methyl carbonate at both methyl and ethyl groups and the formation of large (Liw)AlxOyClz composite deposits on the cathode surface result from perchlorate degradation at the cathode. This leads to increased cell resistance, reduced capacity retention, and accelerated degradation of the LiClO4‐containing electrolytes.