YQYaoguang Qi

Yaoguang Qi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yaoguang Qi has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Wellbore Pressure Control Method for Two-Layer Coal Seam Gas Coproduction Wells

    by Hongying Zhu, Yaoguang Qi, Hao Hu, Fenna Zhang, Chuankai Jing, Junwei Zhao

    In coal seam gas (CSG) coproduction wells, due to the different production pressures of CSG production layer at different depths, the interlayer interference in wellbore seriously affects the gas production of a coproduction well. To effectively suppress the interlayer interference of the wellbore, a wellbore pressure distribution method for a two-layer coproduction well is proposed. Based on the analysis of the factors influencing the flow pressure distribution in the wellbore of two-layer coproduction wells, a method of coproduction flow pressure adjustment by regulating the wellhead pressure and the depth of the dynamic fluid level was established in this paper. The results show that wellhead pressure can directly affect the production pressure of two layers. The variation in layer 1 output mainly affects the pressure difference between the wellhead pressure and the pressure at the depth of layer 1, which has little effect on the pressure difference between layer 1 and 2. An increase in gas production from layer 2 would not only cause a pressure increase in layer 1, but also result in a reduction of the production pressure at layer 2. The maximum pressure gradient of the gas section is 0.14 MPa/100 m, and the pressure gradient of the gas–liquid section is 0.53–1.0 MPa/100 m.


  • Pressure Drop Prediction Model of the Gas-Liquid Stratified Flow Development Section in the Horizontal Pipeline

    by Fenna Zhang, Yingying Zhang, Jia Li, Hongying Zhu, Jian Zhang, Yaoguang Qi

    The gas phase accelerating beyond the liquid phase caused by gas-liquid slippage cannot be ignored in short horizontal pipelines with undulation and inflow, and there is no method to calculate it. Therefore, a pressure drop prediction model for variable liquid holdup was developed in this paper. The theoretical model calculation results were validated using computational fluid dynamics. The effectiveness of the pressure drop prediction model has been demonstrated. The various pressure drop, liquid holdup, and development length laws were then examined. The findings indicate that: the pressure drop in the developed section of stratified flow is not only the friction pressure drop but also the acceleration pressure drop; the length of the stratified flow development section and pipeline pressure drop are more easily affected by the flowrate than the liquid holdup in the pipe inlet. Using the relevant data from coalbed methane horizontal wells as an example, the L/D of the development section is approximately 40–85 when the inlet flowrate is 0.8–1 m/s, and the inlet liquid holdup is 0.3–0.5. The pressure drop characteristics in the gas-liquid stratified flow development section are obviously different from those in the stable section. The development of a pressure drop prediction model for the stratified flow development section lays the theoretical groundwork for the investigation of gas-liquid two-phase flow in horizontal pipelines with short or undulating and inflow conditions.


  • Open Access

    Study on Key Parameters for Jet Impacting Pulverized Coal Deposited in Coal-Bed Methane Wells

    by Hongying Zhu, Likun Xue, Fenna Zhang, Yaoguang Qi, Junwei Zhao, Dehua Feng

    Cleaning out the pulverized coal deposited at the bottom of a coalbed methane (CBM) well is key to achieving continuous CBM drainage and prolonging the workover period. In this study, Fluent is used in conjunction with the standard k-ε model and the Eulerian-Eulerian model to simulate and analyse jet erosion of deposited pulverized coal particles. The depth and width of the stable erosion pit that is formed by jet-impacting deposited pulverized coal under different conditions are determined and provide a theoretical basis for the cleanout of pulverized coal in the bottom of a CBM well. In this paper, the three parameters of the jet target distance, nozzle diameter and nozzle outlet flow velocity are selected to perform an orthogonal simulation. The change trends in the depth and width of the scouring pit with time are determined. The results show that jet impacting of deposited pulverized coal can be categorised into four stages, periods of rapid growth, stability, jet swing and dynamic stability. A sensitivity analysis shows that the nozzle outlet flow velocity has the strongest influence on the depth of the scouring pit among the selected parameters. The depth of the jet impact pit can reach the maximum depth at t = 3 s, while the width of the impact pit can reach the maximum after t = 7 s. This can provide key design parameters for CBM well pulverized coal impacting operation. It is of great significance for capacity damage control during CBM well workover operation.