AMAditya Varma Muppala

Aditya Varma Muppala

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aditya Varma Muppala has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A 241--271 GHz Sparse MIMO Radar With Antenna-Integrated Transmitter and Receiver Chips

    by Brian Woods, Yao Yu, Ariel Habshush, Amin Rashidian, Aditya V. Muppala, Ehsan Afshari, Toshifumi Nakatani

    A 241–271 GHz 3TX4RX sparse and linear multi-input multi-output (MIMO) radar is demonstrated with the TX antenna spacing of 1.2 mm and the RX antenna spacings of 1.8 and 3.0 mm. Using coprime array technique, the sidelobe levels of the virtual array are significantly reduced. Multiple on-chip antenna CMOS transceiver dies are mounted on a four-layer Rogers printed circuit board (PCB). Ku-band offset stepped-frequency continuous wave (SFCW) signals are applied for TX and RX chips to emit and receive a sub-THz signal, respectively. The measured range and angular resolutions were <8.0 mm and <8.0°, respectively. The developed array system is extendable and useful for degraded visual environment (DVE) imaging, precision nondestructive imaging, and microscopy applications.

  • Beyond Imaging: A 256-GHz Superheterodyne FMCW Radar System for 3-D Imaging and Micro-Doppler-Based Sound Reconstruction

    by Ali Ghazizadeh Ghalati, Aditya Varma Muppala, Ali Mosallaei, Morteza Tavakoli Taba, Behzad Yektakhah, Kamal Sarabandi, Ehsan Afshari

    This letter presents a state-of-the-art frequency-modulated continuous wave (FMCW) imaging radar system capable of high-resolution diffraction-limited 3-D imaging and micro-Doppler-based speech reconstruction. The system employs a phase-locked loop (PLL)-based heterodyne chirp generation unit and transmitter–receiver (TX–RX) chips fabricated in 65-nm CMOS. Operating with a 24-GHz bandwidth centered at 256GHz, the radar achieves a 6.25-mm range resolution and sub-millimeter cross-range resolution in 3-D imaging. Phase stability and long-term coherence are verified through inverse synthetic aperture radar (ISAR) measurements, demonstrating cross-range resolution near the theoretical diffraction limit (i.e., $\approx \lambda /2$ ). Over-the-air audio and speech reconstruction is demonstrated by capturing the micro-Doppler signature of a speaker on an aluminum membrane. To the best of our knowledge, this is the first integrated CMOS imaging radar front-end capable of coherent superheterodyne FMCW operation and micro-Doppler sound reconstruction above 200 GHz.

  • Rapid Indoor Mapping and Non-Line-of-Sight Imaging Using a 228-GHz FMCW Polarimetric Radar System

    by Abdullah Alburadi, Aditya Varma Muppala, Adib Y. Nashashibi, Hussein N. Shaman, Kamal Sarabandi

    In this article, a polarimetric millimeter-wave FMCW radar operating in the 222-228 GHz frequency range is proposed for mapping applications in indoor environments. Equipped with a mechanically scanning fan-beam reflector antenna with 360° field of view, the radar can generate 2D images of its scene, offering LiDAR-like azimuthal resolution of 0.3°. The system’s performance for indoor mapping as well as Line-of-Sight (LOS) and None-Line-of-Sight (NLOS) obstacle detection tasks is demonstrated in building corridors. The measurement scenarios include various wall types and wooden doors with metallic frames. The overall corridor map is created by taking multiple radar images and combining them through post-processing. Given the strong presence of ghost targets in the radar images, an algorithm is developed for NLOS target detection and localization. As a foundation for this investigation, the wave reflection coefficients of painted drywall for both vertical and horizontal polarizations, ΓVV and ΓHH, are measured. Based on these results, a novel technique for NLOS target identification using polarization discrimination is proposed and experimentally verified. This technique is further tested in a realistic scene, where an L-shaped corridor is mapped using the polarimetric radar measurement, and NLOS targets are detected and localized using a mirroring transformation.

  • A 242-267 GHz Bistatic Superheterodyne Radar System for Precision Terahertz Sensing and Imaging in 65-nm CMOS

    by Aditya Varma Muppala, Morteza Tavakoli Taba, Behzad Yektakhah, James Gruber, Hamad Alotaibi, Kamal Sarabandi, Ehsan Afshari

    A state-of-the-art radar system suitable for terahertz (THz) sensing and imaging is presented. The system is composed of a bistatic superheterodyne transmitter–receiver (TX–RX) pair, designed and fabricated in a 65-nm CMOS process, driven by three coherent external sources and measured using a lock-in amplifier. The TX and RX chips each employ a wideband multiplier and amplifier chain to achieve a peak output radiated power of -2 dBm and a radar bandwidth of 25 GHz. A novel fully integrated dual-slot cavity backed antenna is designed based on characteristic mode analysis and coupled mode theory. The antenna achieves a 30 GHz wide gain, polarization and impedance bandwidth with front-side radiation and 18 dB polarization discrimination over the entire band. The three stage power amplifier (PA) is fed by a four-way slot-line-based balanced power divider. Miniaturization and symmetry enforcement are used to achieve 0.65 dB of insertion loss and less than 0.02∘ of phase imbalance over an ultra-wide bandwidth of 50 GHz centered at 125 GHz. For the RX, a two-stage superheterodyne architecture is used to improve the noise figure (NF), which is measured to be 15 dB at its minimum. The system architecture enables the entire wide-band scattering data of all targets to be downconverted onto a single continuous wave (CW) signal, whose amplitude and phase are measured with very high sensitivity and accuracy using a lock-in amplifier. The measured range and velocity accuracy are 40 μm and 80 μm/s, respectively, which are shown to agree well with theoretical estimates. Finally, the system’s phase accuracy and long-term phase coherence are tested in a high-resolution inverse synthetic aperture radar (ISAR) experiment with several targets. The resulting images show a cross-range resolution that is at the theoretical diffraction limit (i.e., ≈λ/2). To the best of our knowledge, this article reports the first coherent imaging radar system above 200 GHz in CMOS.


  • An Ultrawideband Quad-Mode SIW Cavity-Backed Slot Antenna for NextG Communication and Sensing Arrays

    by Aditya Varma Muppala, Kamal Sarabandi

    This paper presents a novel Substrate Integrated Waveguide (SIW) Cavity-Backed Slot Antenna (CBSA) to enable the next generation of communication and sensing infrastructure. The antenna achieves a bandwidth of 40%, with a low profile (c), high front to back ratio, good polarization purity, high isolation, and scalability to large active arrays such as phased arrays and Reconfigurable Intelligent Surfaces (RIS). To achieve wideband operation, four resonant characteristic modes are excited in a compact T-shaped cavity with a rectangular slot aperture. The interaction of these four modes is shown to create fictitious shorts along the length of the slot that result in multiple resonances. Characteristic Mode Analysis (CMA) and optimization are used to place 4 such fictitious short modes at the right frequencies in order to cover a fractional bandwidth of 40%, which is shown to be close to the theoretical bandwidth limit of a single slot with broadside radiation. The antenna is integrated into a 2×1 back-to-back array with a novel ultra-wideband out-of-phase power divider to achieve a symmetric beam pattern. This unit cell is used to demonstrate a high isolation, full-duplex, broadband antenna system. Next, the antenna is integrated into a 1×6 electronically scanned array to demonstrate 1-D beam-steering over the entire band. Finally, 2-D scalability is investigated by prototyping a 2×2 triangular lattice array. All the antennas presented are fabricated in a standard 4-layer printed circuit board to cover the 20 - 30 GHz band.


  • FMCW Inverse Circular Synthetic Aperture Radar Using a Fast Time-Domain Reconstruction

    by Aditya Varma Muppala, Jeffrey A. Fessler, Kamal Sarabandi

    This article proposes a millimeter-wave inverse circular synthetic aperture radar system and a fast time-domain wavefront reconstruction (TDWR) algorithm for near real-time, low-cost imaging of packages and concealed objects. An 80-GHz frequency-modulated continuous-wave (FMCW) radar illuminates targets on a high-speed rotating turntable driven by a precision motor system. Data are collected over a synthetic circular aperture and processed to form high-resolution images of targets. To achieve real-time operation, a fast and accurate time-domain reconstruction and deconvolution imaging algorithm is proposed. The image formation is based on frequency-domain wavefront reconstruction for circular arrays that is adapted to FMCW radars by proposing an analogous time-domain approach. Next, an analytical form for the point spread function (PSF) of circular synthetic aperture radars (CSARs) is derived and used to speed up the recursive deconvolution for improved image quality. The system and reconstruction algorithm are applied to an experimental setting of detecting a concealed handgun in a package. Several practical considerations are discussed to ensure that the reconstruction and deconvolution can be applied successfully in retrieving good quality images. The experimental datasets and codes are available at https://adityamuppala.github.io/research/.


  • Fast-Fourier Time-Domain SAR Reconstruction for Millimeter-Wave FMCW 3-D Imaging

    by Aditya Varma Muppala, Adib Y. Nashashibi, Ehsan Afshari, Kamal Sarabandi

    This article presents an accurate phase calibration technique and a fast time-domain reconstruction algorithm for frequency-modulated continuous wave (FMCW) synthetic aperture radar (SAR) imaging in 3-D. The phase calibration is tailored toward millimeter-wave imaging systems that operate over a wide bandwidth. The first step in the calibration is to estimate the phase nonlinearities in the chirp signal. This is done by using a two-point relative distance calibration measurement. Range deskewing is used to perform a range independent nonlinearity correction to the measured intermediate frequency (IF) signals. The second step in the calibration is to bring the phase reference to the phase center of the antenna by using a conducting stencil as a reference target. The calibrated IF signal is shown to follow a time-domain dispersion relation that is conducive to fast near-field imaging. Based on this, a holographic time-domain 3-D image reconstruction algorithm is presented. The reconstruction is composed of two 2-D fast-Fourier transforms (FFTs) and a 1-D nonuniform FFT (NUFFT). The proposed algorithm is two orders of magnitude faster than existing time-domain reconstruction algorithms for FMCW 3-D imaging radars. A $W$ -band (76–84 GHz) FMCW system is used to experimentally verify the proposed calibration and reconstruction. The measured lateral resolution is shown to reach the theoretical diffraction limit, demonstrating near-perfect phase reconstruction. Several experiments of 3-D targets and concealed objects are presented to demonstrate the high quality of 3-D images that can be generated from FMCW SAR data. The experimental datasets and codes are available at: https://github.com/AdityaMuppala.


  • SATURN: A Double-Recursive Deconvolution Algorithm for Suppressing Sidelobe Effects in Non-Nyquist SAR and MIMO Imaging Radars

    by Aditya Varma Muppala, Kamal Sarabandi

    The angular resolution of an imaging radar system is limited by the aperture size and it’s associated cost and complexity. Relaxing the λ/2 element spacing condition for large arrays introduces side-lobe and grating lobe effects that severely degrade the image quality. In certain imaging applications, such as automotive radars, the targets are sparsely located and the imaging domain can be approximated as a collection of point scatterers. In such cases, it is possible to "deconvolve" these side-lobe effects to recover a clean image. In this paper, a double recursive deconvolution algorithm titled SATURN (for Sparse Array Target-segregation Using Recursive Nulling) is proposed. It differs from existing CLEAN deconvolution algorithms in two steps: target response estimation and multiple target decorrelation. The target response is estimated using a Sweep and Extinguish step which removes the reliance on the complex image phase. Correlation between targets is suppressed using a Recursive Nulling step which prevents break up of point targets. The algorithm is applied to Synthetic Aperture Radars (SAR) and Multiple Input Multiple Output (MIMO) radars in sparse 3D imaging scenarios with canonical targets and real world targets. Dynamic range improvement of 25 dB and thinning factors of over 200 are experimentally demonstrated using a 31 element circular array of X-band U-slot patch antennas with an array diameter of 30λ.


  • Low-Cost 3-D Millimeter-Wave Concealed Weapons Detection Using Single Transceiver Affine Synthetic Arrays

    by Aditya Varma Muppala, Kamal Sarabandi

    The problem of detecting concealed weapons with a low-cost 3-D imaging radar system is addressed. The concept of affine phase center translations to generate a synthetic array is proposed as an alternative to conventional synthetic aperture and multistatic imaging radars. This enables the generation of a synthetic 2-D array with a dynamic dual reflector antenna system and a single transceiver. The dual reflector antenna is composed of a 3-D printed ellipsoidal sub-reflector and a conic main reflector. The phase front of the horn feed is shown to be translated to different locations by controlling the relative positions of the two reflectors. The reflectors are fabricated using a simple protocol that keeps the cost very low but introduces significant phase aberrations. These phase aberrations are corrected by developing a novel geometrical optics based optimized calibration routine. The imaging system is tested using a 76.5–84.5 GHz stepped frequency transceiver in different concealed weapons detection scenarios. As a demonstration, a metallic handgun and a nonmetallic pipe-bomb are concealed on a mannequin which serves as a human surrogate with similar skin reflectivity. At a target distance of 2.8 m the achieved depth resolution and lateral resolution are 2 and 1.5 cm, respectively. The 3-D images constructed using back-projection are of high enough quality to successfully identify the weapons while maintaining the privacy of the individual.


  • A 223-GHz FMCW Imaging Radar With 360° FoV and 0.3° Azimuthal Resolution Enabled by a Rotationally Stable Fan-Beam Reflector

    by Aditya Varma Muppala, Abdullah Alburadi, Adib Y. Nashashibi, Hussein N. Shaman, Kamal Sarabandi

    A mechanically scanned high-resolution 2-D imaging radar system with full 360° Field-of-View (FoV) is presented. The system is composed of a multi-function 222-228 GHz frequency modulated continuous wave (FMCW) radar and a moment of inertia optimized 3-D printed offset reflector antenna. The reflector geometry is made from an Elliptic Toroidal surface which is shown to produce a high-gain fan-beam with an 11:1 aspect ratio. The reflector is rotated at speeds up to 10 Hz for high throughput imaging. The wobble generated by the high speed rotation is suppressed by optimizing the mass distribution of the reflector body. It is fabricated in-house using a low-cost table-top Fused Deposition Modelling (FDM) 3-D printer. The reflecting surface is metallized with a silver coated copper paint and processed using simple steps to ensure smoothness and accuracy. The reflector achieves beamwidths of 4.6° in elevation and 0.42° in azimuth, with a peak gain of 38.7 dBi. The 3 dB azimuthal resolution of the radar two-way beam is measured to be 0.3°. The system is tested in real-world scenarios and the resulting images and videos are of unprecedented quality due to the large area of coverage, high resolution, high speed and excellent dynamic range. To the best of our knowledge, this is the first demonstration of a compact radar system that is comparable in resolution, speed and angular coverage to lidars, while offering higher dynamic range and immunity to severe weather and lighting conditions.