XGXianding Guo

Xianding Guo

*This is an algorithmically generated author record based on publicly available information.

Xianding Guo has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of Water-Stability Behaviors in Coastal Mud Multiply Modified by Cement and Coarse-Particle Spoil

    by Zipeng Qin, Yan Tian, Xianding Guo, Jiongzhang Chen, Huang Huang, Zongkai Ye, Dongxue Wang, Erjin Xu, Hanwei Huang, Xinxin Chen

    This study investigates the water-stability performance and stabilization mechanism of a hybrid-modified dredged muck sampled from the protection channel of the southern seawall, Cangnan County, China, and explores the feasibility of reusing the modified soil as backfill or non-structural fill behind the dike body. The muck was amended with two industrial by-products: (i) coarse-grained spoil excavated from an adjacent power-plant project, serving as a particle-size modifier, and (ii) ordinary Portland cement, acting as the chemical stabilizer. Unconfined compressive strength (UCS) tests were conducted on specimens cured for 7 d and 28 d under both saturated and unsaturated conditions, complemented by scanning electron microscopy (SEM) to elucidate microstructural evolution. An optimal mix proportion that satisfies the prescribed water-stability criterion while maintaining cost-effectiveness was thereby identified. Experimental results demonstrate that cement content, coarse-spoil fraction and curing age govern the water-stability behavior, with cement dosage exerting the most pronounced influence. A 28 d cured blend containing only 5% cement yielded a low water-stability coefficient (31.8%) and negligible post-immersion strength. Conversely, a ternary mixture comprising 40% muck, 60% coarse spoil and 15% cement achieved the highest water stability, recording UCS values of 1582 kPa (saturated) and 2025 kPa (unsaturated), corresponding to 78.1%. These findings provide a theoretical basis and practical guidance for the valorization of waste soils in coastal engineering and for the design/construction of seawalls. These findings not only provide a theoretical basis and practical guidance for the valorization of waste soils in coastal engineering and for the design/construction of seawalls, but also substantially expand the available material source, drive down construction costs, and markedly mitigate the environmental impacts associated with the off-site disposal of excavated waste.


  • Open Access

    Study on Stability and Ecological Restoration of Soil-Covered Rocky Slope of an Abandoned Mine on an Island in Rainy Regions

    by Xiaoyan Li, Zipeng Qin, Yan Tian, Hongwei Zhang, Haitao Zhao, Jiafa Shen, Weilong Shao, Guangrong Jiang, Xianding Guo, Junsuo Zhang

    The eastern slope of the abandoned mine in the Zhoujiayuan Mountain Island area has been seriously damaged by local quarrying, which often triggers visual pollution, soil erosion, and landslides during rainfall. This paper carries out an ecological restoration of the abandoned mine based on indoor experiments and field investigation data. The paper also quantitatively analyzes the stability evolution laws of the soil-covered slope before and after the ecological restoration in the rainfall process, putting forward further slope reinforcement and ecological restoration measures. The results showed that the stability safety factor of the covered slope decreased to 0.92 after raining for 18 h, and the instability risk was very high. When the vegetation had recovered, the stability of the soil-covered slope with root system was significantly improved, and its safety factor was close to 1.15 after 64 h of continuous rainfall. Throughout the field observation conducted from 2019 to 2022, the slope of abandoned rock mines was found to be lush with restored plant diversity. After several continuous rainfall processes, neither soil erosion nor instability phenomena were found there. The study has certain reference significance for the ecological restoration of abandoned rock mines in rainy regions.


  • Open Access

    Mechanical Properties and Constitutive Model of the Cement-Improved Loess under Freeze-Thaw Conditions

    by Yaqiang Niu, Luzheng Hou, Zipeng Qin, Xu Wang, Yongfu Zhang, Weilong Shao, Guangrong Jiang, Xianding Guo, Junsuo Zhang

    Cement-improved loess (CIL) is used as a common filler for subgrade construction projects in loess areas. The freeze-thaw (F-T) conditions have a significant effect on the stability of cement-improved loess subgrades in seasonally frozen regions. In this paper, the CIL samples, experiencing different numbers of F-T cycles at varying freezing temperatures, were used in consolidated undrained triaxial compression tests to investigate the effect of F-T conditions on the mechanical properties of CIL. The results show the stress-strain curves of CIL are of a strain-softening type with strong elastic brittleness. The initial tangent modulus of CIL increases with the growing confining pressure and gradually decreases with the increase in the F-T cycle number and the decreasing freezing temperature. It loses 46.4% of its original value after the twelfth F-T cycle with the confining pressure of 150 kPa and at the freezing temperature of −15 °C. The strength of CIL decreases with the increasing F-T cycle number, but it gradually tends to keep stable after the sixth F-T cycle. The strength also decreases with the reduction in the freezing temperature. It loses 37.7% of its original value after the twelfth F-T cycle with the confining pressure of 150 kPa and the freezing temperature of −15 °C. To express the nonlinearity correlation between the strength and confining pressure under F-T conditions, the Weibull function was applied and a nonlinear Mohr-Coulomb strength criterion was proposed. Through introducing a breakage rate function and a local strain coefficient, a binary-medium constitutive model consisting of bonded elements (soil-particle cohesion) and frictional elements (soil particles or soil aggregations) was established to describe the stress-strain relationships of CIL under F-T conditions. The test results indicated that the model can well describe the strain-softening phenomenon of the stress-strain curve of CIL and reflect the breakage mechanism of CIL.