Jonathan M. Dodds
Research Subjects
Jonathan M. Dodds has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Edward James Long
Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University 1 , Loughborough, Leicestershire LE11 3TU, United Kingdom
3 shared publications - Jacob J. Lavin
Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University 1 , Loughborough, Leicestershire LE11 3TU, United Kingdom
3 shared publications - John R. Tyrer
Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, UK
3 shared publications - Lewis C. R. Jones
Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, UK
3 shared publications - Julian T. Spencer
United Kingdom National Nuclear Laboratory, Chadwick House 2 , Warrington Road, Birchwood Park, Warrington WA3 6AE
2 shared publications - Mathew T. Jones
Wolfson School of Mechanical Electrical and Manufacturing Engineering, Loughborough University 1 , Loughborough LE11 3TU
2 shared publications
Latest Publications
- 4 December 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 38 (1)
Laser cutting hazards of nuclear infrastructure decommissioning and dismantling
Laser cutting for nuclear decommissioning and dismantling presents unique challenges in aerosol hazard control and radiation safety. The UK's Nuclear Decommissioning Authority, responsible for Europe's largest nuclear decommissioning program, has identified laser cutting as a suitable process for decommissioning. However, the generation of hazardous aerosolized by-products during laser cutting limits its implementation as a nuclear decommissioning tool. Current control methods rely heavily on human intervention during waste filter loading and unloading, potentially introducing unnecessary radiation exposure that could be mitigated through engineering controls. Lasers are known to generate a range of aerosols during the cutting process. The high temperatures and gas pressures of the laser process can cause the volatile breakdown of metals and the formation of particles < Ø 1 μm. While these can be challenging to control in the manufacturing environment, they increase the complexity of extraction and filtration during nuclear decommissioning and dismantling. This paper incorporates previous studies into the effect of gas dynamics on the generation mechanisms of laser fume, transportation mechanics of laser-generated aerosols, and the effects of laser particulate on filtration systems. It identifies a range of laser-generated aerosol hazards from the laser cutting of steel infrastructure. It presents a set of recommendations for the cutting process and ventilation systems to improve the risk assessment of laser cutting for nuclear decommissioning and dismantling.
- 4 December 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 38 (1)
Laser cutting hazards of nuclear infrastructure decommissioning and dismantling
Laser cutting for nuclear decommissioning and dismantling presents unique challenges in aerosol hazard control and radiation safety. The UK's Nuclear Decommissioning Authority, responsible for Europe's largest nuclear decommissioning program, has identified laser cutting as a suitable process for decommissioning. However, the generation of hazardous aerosolized by-products during laser cutting limits its implementation as a nuclear decommissioning tool. Current control methods rely heavily on human intervention during waste filter loading and unloading, potentially introducing unnecessary radiation exposure that could be mitigated through engineering controls. Lasers are known to generate a range of aerosols during the cutting process. The high temperatures and gas pressures of the laser process can cause the volatile breakdown of metals and the formation of particles < Ø 1 μm. While these can be challenging to control in the manufacturing environment, they increase the complexity of extraction and filtration during nuclear decommissioning and dismantling. This paper incorporates previous studies into the effect of gas dynamics on the generation mechanisms of laser fume, transportation mechanics of laser-generated aerosols, and the effects of laser particulate on filtration systems. It identifies a range of laser-generated aerosol hazards from the laser cutting of steel infrastructure. It presents a set of recommendations for the cutting process and ventilation systems to improve the risk assessment of laser cutting for nuclear decommissioning and dismantling.
- Open Access
- 27 September 2023
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (4)
Reducing environmental risks in laser cutting: A study of low-pressure gas dynamics
High gas pressures (1.0–1.6 MPa) are employed in conventional inert laser cutting to achieve efficient material removal and high cut quality. However, this approach results in the emission of large quantities of by-products, which can pose a risk to human health and the environment. For applications such as nuclear decommissioning, where global extraction and containment can be challenging, hazardous by-product formation, rather than process efficiency, is the main priority. This paper demonstrates low-pressure (0.3–0.6 MPa) laser-cutting techniques developed to reduce by-products. This study investigates the causal links between melt ejection and gas dynamic interactions in low-pressure laser cutting. Experiments were conducted using a 300 W Nd:Yb fiber laser to cut 304 stainless steel samples. Melt ejection and breakdown profiles were captured using a FASTCAM mini AX 200 camera. The lens combination fitted to the camera provided a spatial resolution of approximately 1 μm. The gas dynamic interactions were assessed through comparisons with existing studies of Schlieren imaging in idealized environments. The results show that gas dynamics are crucial in melt ejection and breakdown mechanisms during laser cutting. The key findings of this study are images of breakdown mechanisms linked to low-pressure gas dynamics. The impact of this work is that breakdown mechanisms more favorable to reducing environmental risk have been demonstrated. A greater understanding of the risk is indispensable to developing new laser-cutting control methods for hazardous materials.
- 27 September 2023
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (4)
Open AccessReducing environmental risks in laser cutting: A study of low-pressure gas dynamics
High gas pressures (1.0–1.6 MPa) are employed in conventional inert laser cutting to achieve efficient material removal and high cut quality. However, this approach results in the emission of large quantities of by-products, which can pose a risk to human health and the environment. For applications such as nuclear decommissioning, where global extraction and containment can be challenging, hazardous by-product formation, rather than process efficiency, is the main priority. This paper demonstrates low-pressure (0.3–0.6 MPa) laser-cutting techniques developed to reduce by-products. This study investigates the causal links between melt ejection and gas dynamic interactions in low-pressure laser cutting. Experiments were conducted using a 300 W Nd:Yb fiber laser to cut 304 stainless steel samples. Melt ejection and breakdown profiles were captured using a FASTCAM mini AX 200 camera. The lens combination fitted to the camera provided a spatial resolution of approximately 1 μm. The gas dynamic interactions were assessed through comparisons with existing studies of Schlieren imaging in idealized environments. The results show that gas dynamics are crucial in melt ejection and breakdown mechanisms during laser cutting. The key findings of this study are images of breakdown mechanisms linked to low-pressure gas dynamics. The impact of this work is that breakdown mechanisms more favorable to reducing environmental risk have been demonstrated. A greater understanding of the risk is indispensable to developing new laser-cutting control methods for hazardous materials.
- Open Access
- 11 October 2022
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 34 (4) , 042016
Controlling nozzle and kerf gas dynamics to manage hazardous laser cutting fume
Conventional laser cutting is optimized for cut speed and quality but does not consider process fume. When processing hazardous materials in environments where global extraction is not practical, such as during in situ nuclear decommissioning, consideration of process fume is critically important. Fume generation in laser cutting is governed by forces applied to the molten cut front; dynamic interactions between the assist-gas and the cut front control these forces. This paper investigates the causal links between key gas-dynamic features and fume generation mechanisms in laser cutting. Its aim is to provide the preliminary understanding required to design process setups targeted at reducing the fine particle fraction. During laser cutting, the assist-gas boundary layer separates (BLS) from the molten cut front and, therefore, downstream forces applied on the melt are significantly changed. In this work, the BLS point is analyzed, captured via schlieren imaging, in an idealized environment. This separation point is related to features on the cut wall of laser-cut samples, validating the gas-dynamic interactions. The samples were cut from 3 mm thick 304 stainless steel, using a 1 kW Nd:Yb fiber laser. Control of the surface stagnation pressure and gas flow boundary conditions were used to relocate the point of BLS within the cut front, and the relationship of these parameters was analyzed. The results demonstrate that shifting the point of BLS along the cut front can be used to control fume generation mechanisms. This study successfully provided the preliminary understanding necessary to manage fume generation during the laser cutting process.
- 11 October 2022
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 34 (4) , 042016
Open AccessControlling nozzle and kerf gas dynamics to manage hazardous laser cutting fume
Conventional laser cutting is optimized for cut speed and quality but does not consider process fume. When processing hazardous materials in environments where global extraction is not practical, such as during in situ nuclear decommissioning, consideration of process fume is critically important. Fume generation in laser cutting is governed by forces applied to the molten cut front; dynamic interactions between the assist-gas and the cut front control these forces. This paper investigates the causal links between key gas-dynamic features and fume generation mechanisms in laser cutting. Its aim is to provide the preliminary understanding required to design process setups targeted at reducing the fine particle fraction. During laser cutting, the assist-gas boundary layer separates (BLS) from the molten cut front and, therefore, downstream forces applied on the melt are significantly changed. In this work, the BLS point is analyzed, captured via schlieren imaging, in an idealized environment. This separation point is related to features on the cut wall of laser-cut samples, validating the gas-dynamic interactions. The samples were cut from 3 mm thick 304 stainless steel, using a 1 kW Nd:Yb fiber laser. Control of the surface stagnation pressure and gas flow boundary conditions were used to relocate the point of BLS within the cut front, and the relationship of these parameters was analyzed. The results demonstrate that shifting the point of BLS along the cut front can be used to control fume generation mechanisms. This study successfully provided the preliminary understanding necessary to manage fume generation during the laser cutting process.