RMRuixin Miao

Ruixin Miao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ruixin Miao has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design of a surgical navigation system based on adaptive robust UWB-IMU fusion positioning

    by Shijie Lv, Ruixin Miao, Zhisen Tian, Yuan Zong, Jinquan Wang, Yijun Wang, Fei Yin

    To address signal occlusion and multipath interference in surgical navigation, this paper proposes an adaptive robust UWB–IMU fusion positioning method based on an error-state Kalman filter. The proposed Adaptive Robust Combined Positioning Algorithm (ARCPA) integrates innovation-based covariance adaptation, sliding-window NLOS rejection, cosine-restart decay, and PDOP-based geometry weighting to enhance robustness under dynamic interference. A realistic operating-room simulation including LOS/NLOS transitions and sensor drift is constructed for validation. Compared with single-sensor UWB positioning (mean error 0.10 m, maximum deviation 0.54 m), ARCPA achieves a Tip RMSE of 1.13 mm and a 95th percentile error of 1.9 mm, corresponding to 98.9% accuracy improvement and 99.6% reduction in maximum deviation. During the critical drilling phase, ARCPA attains a Tip RMSE of 1.13 mm and Tip P95 of 1.90 mm, outperforming KF, UKF, EKF, PF, ARKF, FGO, and MHE. The results demonstrate high-precision and stable localization suitable for surgical navigation applications.

  • Tunnel Fissure Water Structure Detection Based on Multipoint Geostatistical Bayesian Method

    by Yunzhi Wang, Xiyu He, Ruixin Miao, Qingyue Wang, Shu Diao, Chuandong Jiang

    Nuclear magnetic resonance (NMR) has various applications in underground engineering, particularly in tunnels, where it plays a crucial role in the early detection of potential disaster-inducing water sources. Water bodies that pose a threat in tunnels often manifest as fissure water nestled between rock masses. However, the current application of tunnel NMR detection is limited to the one-dimensional (1-D) layered models, specifically magnetic resonance sounding (MRS), which fails to capture the spatial structure of such fissure water. To precisely locate disaster-inducing water bodies, the MRS method needs to be extended to two-dimensional (2-D) structural detection. Thus, we propose a method for imaging the structure of tunnel fissure water based on multipoint geostatistical Bayesian framework. This method relies solely on data acquired from 1-D MRS measurements, complemented by borehole data obtained during the construction process, to detect 2-D structures of fissure water, without the need of complicated 2-D measurement process. Furthermore, we enhance the Markov chain Monte Carlo (MCMC) algorithm to improve the sampling performance of Bayesian method through a biased-estimation constraint strategy. Through synthetic experiments, we demonstrate the effectiveness of this method in predicting the intricate distribution of fissure water and its interconnected structure. Practical validation is provided on the basis of a series of field-measured data collected in an actual tunnel.


  • Optimization of the design of a single-sided magnetic resonance magnet array for improved T2 estimation accuracy

    by Ruixin Miao, Chunpeng Ren, Chuandong Jiang, Qingyue Wang, Yunzhi Wang, Xiangqian Yu

    Single-sided magnetic resonance (SSMR) technology has a compact structure and great potential for use in mobile and nondestructive detection of large aqueous materials. As the detection depth increases, the magnetic field gradient generated by the magnetic resonance magnet placed on one side weakens, leading to a large distortion of T 2, thereby significantly impeding accurate estimation of the pore size distribution within the detection target. In this study, to address this problem, the distortion in the region of interest (ROI) is significantly reduced by optimizing the size and arrangement of the SSMR magnet array. First, to evaluate the T 2 distortion within the ROI, we developed a T 2 distortion loss function based on α and θ, which are key parameters of the spin echo (SE) signal. We then combined the nonlinear constraints with the loss function to form a Lagrangian function, which was solved via the Newton iteration method to obtain the magnet array parameters. The magnet array is called the AT magnet array. The T 2 distortion was quantitatively evaluated by calculating the SE signal generated by the AT magnet array in the ROI. Furthermore, we compared the detection results obtained with the AT and the semi-annular (SA) magnet array. The results showed that within the 3 cm × 3 cm target range of a 10 cm depth, the AT magnet array had a smaller T 2 distortion of only 1.3%. After the ROI was expanded to 5 cm × 5 cm, the T 2 distortion of the SE signal measured by the AT magnet array was 6%, which met the SSMR detection accuracy requirements in this range. Therefore, the optimized design of the magnet array based on α and θ provides a theoretical basis for obtaining SE signals with low T 2 distortion at large depths and over large areas via SSMR.

  • Accelerated Imaging of 2-D Water-Bearing Structures in MRT Data Based on the SVD-UNet

    by Tingting Lin, Qingyue Wang, Yunzhi Wang, Ruixin Miao, Chunpeng Ren, Chuandong Jiang

    Magnetic resonance tomography (MRT) is a geophysical exploration technique that enables the imaging of two- or three-dimensional water-bearing structures, offering distinct advantages, including noninvasiveness, quantifiability, and unique interpretability. Currently, MRT data inversion mainly relies on the Q-time (QT) inversion method. Since this method utilizes the Gauss-Newton iteration to seek the optimal solution, it involves a considerable amount of computational workload, thus consuming a significant amount of time. To overcome this challenge, this study introduces an accelerated imaging method by combining singular value decomposition (SVD) pseudo-inversion algorithm and the deep neural network algorithm. The SVD pseudo-inversion algorithm transforms MRT data into a water-bearing feature matrix containing only water content and relaxation time information by introducing a priori forward kernel function. Subsequently, neural network establishes a nonlinear mapping relationship between the water-bearing feature matrix and the spatial distribution of the water content and relaxation time in the subsurface. The SVD pseudo-inversion algorithm, by incorporating prior information, mitigates the distribution differences in MRT data caused by geological and measurement parameters. This addresses the limited applicability of deep learning methods under complex geological conditions and multiple measurement schemes. The experimental results demonstrate that the method achieves precise and rapid imaging, while also possessing effectiveness and practicality.


  • Multitype Noise Suppression in Magnetic Resonance Sounding Data Based on a Time–Frequency Fully Convolutional Neural Network

    by Chuandong Jiang, Ruixin Miao, Bang Li, Baofeng Tian, Xinlei Shang, Qingming Duan, Tingting Lin

    Magnetic resonance sounding (MRS) is one of the technical applications of nuclear magnetic resonance (NMR) used to directly detect and quantify groundwater content. MRS suffers from a low signal-to-noise ratio (SNR) due to the low amplitude of free induction decay (FID) signals and an inability to shield environmental noise. In this article, a time–frequency fully convolutional neural network (TFCN) was proposed to suppress random, harmonic, and spike noise from MRS data. The TFCN parameters were trained with the time–frequency spectrum obtained by the short-time Fourier transform (STFT) of the MRS datasets as the input and the noise-free FID signals as the output. Based on the results of synthetic and field data experiments, the TFCN was compared with existing denoising methods. The results showed that the TFCN extracted the envelope of the FID signals from low-SNR random noise with higher accuracy than other methods. Moreover, the TFCN simultaneously suppressed multiple types of noise and exhibited high computational efficiency.


  • 2-D Magnetic Resonance Tomography With an Inaccurately Known Larmor Frequency Based on Frequency Cycling

    by Jiannan Liu, Baofeng Tian, Chuandong Jiang, Ruixin Miao, Yanju Ji

    When using magnetic resonance tomography (MRT) for imaging two- or three-dimensional (2D or 3D) water-bearing structures in a subsurface, the transmitting frequency must be the same as the Larmor frequency. Due to the inhomogeneity and noise interference in a geomagnetic field, it is difficult to determine the precise Larmor frequency using a magnetometer, resulting in unknown frequency offsets and inaccurate estimations of water content and relaxation time ( T * 2 ). To solve the 2D MRT imaging problem in the case of an unknown frequency offset, a frequency cycling method is proposed in this paper. This method takes the estimated Larmor frequency as the center, uses two frequencies with the same offset for transmitting, then combines the acquired MRT signals to obtain frequency-cycled data, and finally uses the off-resonance kernel function for inversion. Based on MRT forward modeling and QT inversion, we conduct synthetic data experiments on a complex model with three water-bearing structures and test the 2D imaging results of the frequency-cycled data. The results show that the water content and T * 2 distribution obtained by the inversion of the frequency-cycled data can accurately reflect the water-bearing structure, which is better than the results of the assumed on-resonance case. In addition, the phase correction method presented in this paper significantly improves the accuracy of 2D MRT estimated aquifer properties under low resistivity conditions. Finally, the validity and accuracy of the frequency cycling method are verified by comparing the inversion results of the data with known drilling data collected in field measurements.


  • Bayesian Inversion for Surface Magnetic Resonance Tomography Based on Geostatistics

    by Chuandong Jiang, Yunzhi Wang, Ruixin Miao, Qi Wang, Xinlei Shang, Baofeng Tian, Qingming Duan, Tingting Lin

    Magnetic resonance tomography (MRT) has the advantages of direct, quantitative and unique interpretation in the field of groundwater detection. Currently, the inversion of MRT data primarily uses the QT (Q-time) inversion method based on Tikhonov regularization. However, when the heterogeneity of an aquifer is high, and the water content distribution is markedly uneven, this method removes many details in the model and cannot perform uncertainty analysis on the results. To solve these problems, we propose a Bayesian inversion for MRT data based on geostatistics. The method uses previously known geological data, such as drilling, to determine prior information model containing variograms and mixture Gaussian probability distributions for generating many stochastic realizations. Under the Bayesian framework, a modified Markov chain Monte Carlo strategy (MCMC) is used to obtain the posterior probability distributions of subsurface aquifers and hydraulic conductivity, and the results of quantitative uncertainty analysis. By comparing the inversion performance for simulated models, the imaging result of the Bayesian method is found to be markedly more accurate than that of the QT method for subsurface two-dimensional aquifers, particularly in explaining the stochastic model (i.e., the water-bearing model with an uneven distribution of water content). This method can also intuitively quantify the uncertainty of the imaging results, which mitigates the shortcomings of existing inversion methods. This paper also discusses the effects of prior information, number of chains and noise levels on the results, and also validates the effectiveness and practicability of the proposed method using field-measured data.