Christoph Wilhelmer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christoph Wilhelmer has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Tibor Grasser
Technische Universität Wien
10 shared publications - Dominic Waldhoer
Technische Universität Wien
9 shared publications - Lukas Cvitkovich
University of Regensburg
9 shared publications - Diego Milardovich
Institute for Microelectronics, Technische Universität Wien , 1040 Wien
4 shared publications Tibor Grasser
TU Wien
3 shared publicationsDominic Waldhoer
Technische Universität Wien
2 shared publications
Latest Publications
- Open Access
- 17 August 2026
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (33) , 333002
Microscopic origins of electron trapping in amorphous silicon nitride ( a -Si 3 N 4 ) and its role in charge-trap flash memory
Amorphous silicon nitride ( a -Si 3 N 4 ) is widely used as the charge storage layer of charge-trap flash (CTF) memory devices, where its high density of deep localized electronic states enables long-term data retention at room temperature. Despite its technological relevance, the microscopic nature of the charge traps in a -Si 3 N 4 is still controversial. In recent years, atomistic modeling has enabled the characterization of intrinsic defects in a - Si 3 N 4 , providing new insights into their structural and electronic properties that are comprehensively discussed in this review. We demonstrate that a variety of structural irregularities, including over- and undercoordinated atoms, Si − Si bonds, vacancies and strained Si − N bonds, introduce localized electronic states in the amorphous network, which act as precursor sites for trapping and retaining electrons. The associated charge transition processes at these trapping sites are analyzed within the framework of nonradiative multiphonon theory and evaluated in the context of macroscopic CTF functionality. Additionally, we present a density functional theory-based computational approach to estimate electron capture cross sections of intrinsic defect sites in a - Si 3 N 4 .
- 17 August 2026
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (33) , 333002
Open AccessMicroscopic origins of electron trapping in amorphous silicon nitride ( a -Si 3 N 4 ) and its role in charge-trap flash memory
Amorphous silicon nitride ( a -Si 3 N 4 ) is widely used as the charge storage layer of charge-trap flash (CTF) memory devices, where its high density of deep localized electronic states enables long-term data retention at room temperature. Despite its technological relevance, the microscopic nature of the charge traps in a -Si 3 N 4 is still controversial. In recent years, atomistic modeling has enabled the characterization of intrinsic defects in a - Si 3 N 4 , providing new insights into their structural and electronic properties that are comprehensively discussed in this review. We demonstrate that a variety of structural irregularities, including over- and undercoordinated atoms, Si − Si bonds, vacancies and strained Si − N bonds, introduce localized electronic states in the amorphous network, which act as precursor sites for trapping and retaining electrons. The associated charge transition processes at these trapping sites are analyzed within the framework of nonradiative multiphonon theory and evaluated in the context of macroscopic CTF functionality. Additionally, we present a density functional theory-based computational approach to estimate electron capture cross sections of intrinsic defect sites in a - Si 3 N 4 .
- Open Access
- 14 July 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (29) , 20498-20512
Reliability and Stability Issues in Bi2O2Se/β-Bi2SeO5 Field-Effect Transistors
The layered semiconductor Bi2O2Se is a promising candidate for next-generation nanoelectronic devices because it combines favorable electronic and structural properties. These include an exceptionally high electron mobility, a suitable bandgap and air stability, and most importantly, the ability to form a high-κ native oxide, Bi2SeO5 (with a calculated bulk κ > 30). However, intrinsic point defects in the semiconductor and the oxide can influence the electronic behavior and long-term reliability. In this work, we employ density functional theory to investigate the electronic structure, formation energies, trap levels, and relaxation energies of the relevant native defects in both Bi2O2Se and β-Bi2SeO5. Our results demonstrate that selenium and oxygen vacancies in the semiconductor Bi2O2Se act as shallow donors, donating free electrons to the conduction band, consistent with the commonly observed unintentional n-type conductivity. In contrast, oxygen vacancies in the dielectric β-Bi2SeO5 introduce deep-level trap states, indicating that they may act as performance-limiting charge trapping centers during device operation. We successfully correlate these theoretically identified defects with experimental device measurements from a prototype Bi2O2Se/β-Bi2SeO5 field-effect transistor, structurally characterized via scanning transmission electron microscopy. We finally demonstrate the contribution of defects to critical reliability issues, specifically hysteresis and bias temperature instability. These insights provide input for reliability modeling and defect engineering strategies for improving the long-term stability of Bi2O2Se/Bi2SeO5-based nanoelectronics.
- 14 July 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (29) , 20498-20512
Open AccessReliability and Stability Issues in Bi2O2Se/β-Bi2SeO5 Field-Effect Transistors
The layered semiconductor Bi2O2Se is a promising candidate for next-generation nanoelectronic devices because it combines favorable electronic and structural properties. These include an exceptionally high electron mobility, a suitable bandgap and air stability, and most importantly, the ability to form a high-κ native oxide, Bi2SeO5 (with a calculated bulk κ > 30). However, intrinsic point defects in the semiconductor and the oxide can influence the electronic behavior and long-term reliability. In this work, we employ density functional theory to investigate the electronic structure, formation energies, trap levels, and relaxation energies of the relevant native defects in both Bi2O2Se and β-Bi2SeO5. Our results demonstrate that selenium and oxygen vacancies in the semiconductor Bi2O2Se act as shallow donors, donating free electrons to the conduction band, consistent with the commonly observed unintentional n-type conductivity. In contrast, oxygen vacancies in the dielectric β-Bi2SeO5 introduce deep-level trap states, indicating that they may act as performance-limiting charge trapping centers during device operation. We successfully correlate these theoretically identified defects with experimental device measurements from a prototype Bi2O2Se/β-Bi2SeO5 field-effect transistor, structurally characterized via scanning transmission electron microscopy. We finally demonstrate the contribution of defects to critical reliability issues, specifically hysteresis and bias temperature instability. These insights provide input for reliability modeling and defect engineering strategies for improving the long-term stability of Bi2O2Se/Bi2SeO5-based nanoelectronics.
- Open Access
- 20 January 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (3)
Valley splitting in Si/SiGe heterostructures from first principles
We compute valley splitting in Si/SiGe superlattices using density functional theory (DFT). This first-principles approach is expected to provide an excellent description of interfaces, strains, and atomistic disorder without empirically fitted parameters. We benchmark atomistic tight-binding (TB) and the “ 2 k 0 ” theory within the effective mass (EM) approximation against DFT. We show that DFT supports the main conclusions of the 2 k 0 theory, but reveals some limitations of semiempirical methods such as the EM and TB, in particular about the description of atomistic disorder. The DFT calculations also highlight the effects of strong valley-orbit mixing at large valley splitting. Nevertheless, TB and the 2 k 0 theory shall provide reasonable valley splitting statistics in many heterostructures of interest for spin qubit devices.
- 20 January 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (3)
Open AccessValley splitting in Si/SiGe heterostructures from first principles
We compute valley splitting in Si/SiGe superlattices using density functional theory (DFT). This first-principles approach is expected to provide an excellent description of interfaces, strains, and atomistic disorder without empirically fitted parameters. We benchmark atomistic tight-binding (TB) and the “ 2 k 0 ” theory within the effective mass (EM) approximation against DFT. We show that DFT supports the main conclusions of the 2 k 0 theory, but reveals some limitations of semiempirical methods such as the EM and TB, in particular about the description of atomistic disorder. The DFT calculations also highlight the effects of strong valley-orbit mixing at large valley splitting. Nevertheless, TB and the 2 k 0 theory shall provide reasonable valley splitting statistics in many heterostructures of interest for spin qubit devices.
- Open Access
- 30 September 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (9)
Optical properties of vacancies in aluminum oxide from first principlesWe employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy ( V O ) and aluminum vacancy ( V Al ) in α − Al 2 O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at V O 0 to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at V O 0 . We confirm that the slowly decaying 3.0 eV emission band of the F center is due to a triplet-singlet transition at V O 0 . Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the F + center are generated by internal transitions at V O + 1 . The line shape for the excitation of an electron from V O + 1 to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with V O + 2 also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in α − Al 2 O 3 is a split-vacancy configuration V Al , s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at V Al − 3 and V Al , s − 3 sites with the CBM. The line shapes of the two V Al configurations overlap and are considerably broader than the spectra corresponding to V O .
- 30 September 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (9)
Open AccessOptical properties of vacancies in aluminum oxide from first principlesWe employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy ( V O ) and aluminum vacancy ( V Al ) in α − Al 2 O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at V O 0 to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at V O 0 . We confirm that the slowly decaying 3.0 eV emission band of the F center is due to a triplet-singlet transition at V O 0 . Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the F + center are generated by internal transitions at V O + 1 . The line shape for the excitation of an electron from V O + 1 to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with V O + 2 also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in α − Al 2 O 3 is a split-vacancy configuration V Al , s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at V Al − 3 and V Al , s − 3 sites with the CBM. The line shapes of the two V Al configurations overlap and are considerably broader than the spectra corresponding to V O .
- 24 December 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (6)
Coherence limit due to hyperfine interaction with nuclei in the barrier material of spin qubits- 24 December 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (6)
Coherence limit due to hyperfine interaction with nuclei in the barrier material of spin qubits- Open Access
- 4 December 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
A stochastic encoder using point defects in two-dimensional materials
While defects are undesirable for the reliability of electronic devices, particularly in scaled microelectronics, they have proven beneficial in numerous quantum and energy-harvesting applications. However, their potential for new computational paradigms, such as neuromorphic and brain-inspired computing, remains largely untapped. In this study, we harness defects in aggressively scaled field-effect transistors based on two-dimensional semiconductors to accelerate a stochastic inference engine that offers remarkable noise resilience. We use atomistic imaging, density functional theory calculations, device modeling, and low-temperature transport experiments to offer comprehensive insight into point defects in WSe2 FETs and their impact on random telegraph noise. We then use random telegraph noise to construct a stochastic encoder and demonstrate enhanced inference accuracy for noise-inflicted medical-MNIST images compared to a deterministic encoder, utilizing a pre-trained spiking neural network. Our investigation underscores the importance of leveraging intrinsic point defects in 2D materials as opportunities for neuromorphic computing.
- 4 December 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Open AccessA stochastic encoder using point defects in two-dimensional materials
While defects are undesirable for the reliability of electronic devices, particularly in scaled microelectronics, they have proven beneficial in numerous quantum and energy-harvesting applications. However, their potential for new computational paradigms, such as neuromorphic and brain-inspired computing, remains largely untapped. In this study, we harness defects in aggressively scaled field-effect transistors based on two-dimensional semiconductors to accelerate a stochastic inference engine that offers remarkable noise resilience. We use atomistic imaging, density functional theory calculations, device modeling, and low-temperature transport experiments to offer comprehensive insight into point defects in WSe2 FETs and their impact on random telegraph noise. We then use random telegraph noise to construct a stochastic encoder and demonstrate enhanced inference accuracy for noise-inflicted medical-MNIST images compared to a deterministic encoder, utilizing a pre-trained spiking neural network. Our investigation underscores the importance of leveraging intrinsic point defects in 2D materials as opportunities for neuromorphic computing.
- Open Access
- 10 October 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (14)
Machine learning force field for thermal oxidation of silicon
Looking back at seven decades of highly extensive application in the semiconductor industry, silicon and its native oxide SiO2 are still at the heart of several technological developments. Recently, the fabrication of ultra-thin oxide layers has become essential for keeping up with trends in the down-scaling of nanoelectronic devices and for the realization of novel device technologies. With this comes a need for better understanding of the atomic configuration at the Si/SiO2 interface. Classical force fields offer flexible application and relatively low computational costs, however, suffer from limited accuracy. Ab initio methods give much better results but are extremely costly. Machine learning force fields (MLFF) offer the possibility to combine the benefits of both worlds. We train a MLFF for the simulation of the dry thermal oxidation process of a Si substrate. The training data are generated by density functional theory calculations. The obtained structures are in line with ab initio simulations and with experimental observations. Compared to a classical force field, the most recent reactive force field, the resulting configurations are vastly improved. Our potential is publicly available in an open-access repository.
- 10 October 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (14)
Open AccessMachine learning force field for thermal oxidation of silicon
Looking back at seven decades of highly extensive application in the semiconductor industry, silicon and its native oxide SiO2 are still at the heart of several technological developments. Recently, the fabrication of ultra-thin oxide layers has become essential for keeping up with trends in the down-scaling of nanoelectronic devices and for the realization of novel device technologies. With this comes a need for better understanding of the atomic configuration at the Si/SiO2 interface. Classical force fields offer flexible application and relatively low computational costs, however, suffer from limited accuracy. Ab initio methods give much better results but are extremely costly. Machine learning force fields (MLFF) offer the possibility to combine the benefits of both worlds. We train a MLFF for the simulation of the dry thermal oxidation process of a Si substrate. The training data are generated by density functional theory calculations. The obtained structures are in line with ab initio simulations and with experimental observations. Compared to a classical force field, the most recent reactive force field, the resulting configurations are vastly improved. Our potential is publicly available in an open-access repository.
- 1 July 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 110 (4) , 045201
Polaron formation in the hydrogenated amorphous silicon nitrideSilicon nitride is commonly used as the charge storage layer of nonvolatile charge trap flash (CTF) memory devices. Previous theoretical investigations have shown a large variety of possible trapping centers in which might contribute to the memory effect, including vacancies, dangling bonds, and overcoordinated atoms. So far, the high H concentration detected in silicon nitride thin films, resulting in a large number of passivated Si–H and N–H bonds, has not been considered in depth in theoretical studies regarding the charge trapping properties. In this work, we show that this passivation of dangling bonds with H gives rise to the formation of hole and electron (bi)polarons at fully coordinated sites and hole traps at Si–H bonds. We employ density functional theory combined with a hybrid functional to demonstrate that both holes and electrons can localize at intrinsic, fully coordinated sites in the amorphous :H network. We classify precursor configurations of the polaron states by analyzing bond lengths, partial charges, maximally localized Wannier functions, bond orders, and electronic states introduced in the band gap upon charge trapping. All trapping sites are characterized according to their thermodynamic properties, such as charge transition level (CTL) and relaxation energy on a statistical level. The CTLs of the (bi)polarons are in the energetic vicinity of the band edges of a Si substrate, showing that these intrinsic sites can trap charges from Si under applied voltages and contribute to the memory effect.- 1 July 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 110 (4) , 045201
Polaron formation in the hydrogenated amorphous silicon nitrideSilicon nitride is commonly used as the charge storage layer of nonvolatile charge trap flash (CTF) memory devices. Previous theoretical investigations have shown a large variety of possible trapping centers in which might contribute to the memory effect, including vacancies, dangling bonds, and overcoordinated atoms. So far, the high H concentration detected in silicon nitride thin films, resulting in a large number of passivated Si–H and N–H bonds, has not been considered in depth in theoretical studies regarding the charge trapping properties. In this work, we show that this passivation of dangling bonds with H gives rise to the formation of hole and electron (bi)polarons at fully coordinated sites and hole traps at Si–H bonds. We employ density functional theory combined with a hybrid functional to demonstrate that both holes and electrons can localize at intrinsic, fully coordinated sites in the amorphous :H network. We classify precursor configurations of the polaron states by analyzing bond lengths, partial charges, maximally localized Wannier functions, bond orders, and electronic states introduced in the band gap upon charge trapping. All trapping sites are characterized according to their thermodynamic properties, such as charge transition level (CTL) and relaxation energy on a statistical level. The CTLs of the (bi)polarons are in the energetic vicinity of the band edges of a Si substrate, showing that these intrinsic sites can trap charges from Si under applied voltages and contribute to the memory effect.- Open Access
- 9 August 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (16) , 2286
Over- and Undercoordinated Atoms as a Source of Electron and Hole Traps in Amorphous Silicon Nitride (a-Si3N4)
Silicon nitride films are widely used as the charge storage layer of charge trap flash (CTF) devices due to their high charge trap densities. The nature of the charge trapping sites in these materials responsible for the memory effect in CTF devices is still unclear. Most prominently, the Si dangling bond or K-center has been identified as an amphoteric trap center. Nevertheless, experiments have shown that these dangling bonds only make up a small portion of the total density of electrical active defects, motivating the search for other charge trapping sites. Here, we use a machine-learned force field to create model structures of amorphous SiN by simulating a melt-and-quench procedure with a molecular dynamics algorithm. Subsequently, we employ density functional theory in conjunction with a hybrid functional to investigate the structural properties and electronic states of our model structures. We show that electrons and holes can localize near over- and under-coordinated atoms, thereby introducing defect states in the band gap after structural relaxation. We analyze these trapping sites within a nonradiative multi-phonon model by calculating relaxation energies and thermodynamic charge transition levels. The resulting defect parameters are used to model the potential energy curves of the defect systems in different charge states and to extract the classical energy barrier for charge transfer. The high energy barriers for charge emission compared to the vanishing barriers for charge capture at the defect sites show that intrinsic electron traps can contribute to the memory effect in charge trap flash devices.- 9 August 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (16) , 2286
Open AccessOver- and Undercoordinated Atoms as a Source of Electron and Hole Traps in Amorphous Silicon Nitride (a-Si3N4)
Silicon nitride films are widely used as the charge storage layer of charge trap flash (CTF) devices due to their high charge trap densities. The nature of the charge trapping sites in these materials responsible for the memory effect in CTF devices is still unclear. Most prominently, the Si dangling bond or K-center has been identified as an amphoteric trap center. Nevertheless, experiments have shown that these dangling bonds only make up a small portion of the total density of electrical active defects, motivating the search for other charge trapping sites. Here, we use a machine-learned force field to create model structures of amorphous SiN by simulating a melt-and-quench procedure with a molecular dynamics algorithm. Subsequently, we employ density functional theory in conjunction with a hybrid functional to investigate the structural properties and electronic states of our model structures. We show that electrons and holes can localize near over- and under-coordinated atoms, thereby introducing defect states in the band gap after structural relaxation. We analyze these trapping sites within a nonradiative multi-phonon model by calculating relaxation energies and thermodynamic charge transition levels. The resulting defect parameters are used to model the potential energy curves of the defect systems in different charge states and to extract the classical energy barrier for charge transfer. The high energy barriers for charge emission compared to the vanishing barriers for charge capture at the defect sites show that intrinsic electron traps can contribute to the memory effect in charge trap flash devices. - Open Access
- 15 May 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (19)
Machine learning interatomic potential for silicon-nitride (Si3N4) by active learning
Silicon nitride (Si3N4) is an extensively used material in the automotive, aerospace, and semiconductor industries. However, its widespread use is in contrast to the scarce availability of reliable interatomic potentials that can be employed to study various aspects of this material on an atomistic scale, particularly its amorphous phase. In this work, we developed a machine learning interatomic potential, using an efficient active learning technique, combined with the Gaussian approximation potential (GAP) method. Our strategy is based on using an inexpensive empirical potential to generate an initial dataset of atomic configurations, for which energies and forces were recalculated with density functional theory (DFT); thereafter, a GAP was trained on these data and an iterative re-training algorithm was used to improve it by learning on-the-fly. When compared to DFT, our potential yielded a mean absolute error of 8 meV/atom in energy calculations for a variety of liquid and amorphous structures and a speed-up of molecular dynamics simulations by 3–4 orders of magnitude, while achieving a first-rate agreement with experimental results. Our potential is publicly available in an open-access repository.
- 15 May 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (19)
Open AccessMachine learning interatomic potential for silicon-nitride (Si3N4) by active learning
Silicon nitride (Si3N4) is an extensively used material in the automotive, aerospace, and semiconductor industries. However, its widespread use is in contrast to the scarce availability of reliable interatomic potentials that can be employed to study various aspects of this material on an atomistic scale, particularly its amorphous phase. In this work, we developed a machine learning interatomic potential, using an efficient active learning technique, combined with the Gaussian approximation potential (GAP) method. Our strategy is based on using an inexpensive empirical potential to generate an initial dataset of atomic configurations, for which energies and forces were recalculated with density functional theory (DFT); thereafter, a GAP was trained on these data and an iterative re-training algorithm was used to improve it by learning on-the-fly. When compared to DFT, our potential yielded a mean absolute error of 8 meV/atom in energy calculations for a variety of liquid and amorphous structures and a speed-up of molecular dynamics simulations by 3–4 orders of magnitude, while achieving a first-rate agreement with experimental results. Our potential is publicly available in an open-access repository.