Lukas Cvitkovich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lukas Cvitkovich has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Christoph Wilhelmer
TU Wien
9 shared publications - Dominic Waldhoer
Technische Universität Wien
7 shared publications - Tibor Grasser
Technische Universität Wien
7 shared publications Tibor Grasser
Institute for Microelectronics Technische Universität Wien
5 shared publications- Diego Milardovich
Institute for Microelectronics, Technische Universität Wien , 1040 Wien
4 shared publications Christoph Wilhelmer
Institute for Microelectronics Technische Universität Wien
3 shared publications
Latest Publications
- 23 June 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (23)
Resonant magnetic proximity hot spots in Co/hBN/graphene
- 23 June 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (23)
Resonant magnetic proximity hot spots in Co/hBN/graphene
- 5 March 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (11)
Valley physics in the two-band k · p model for SiGe heterostructures and spin qubits
- 5 March 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (11)
Valley physics in the two-band k · p model for SiGe heterostructures and spin qubits
- Open Access
- 20 January 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (3)
Valley splitting in Si/SiGe heterostructures from first principles
We compute valley splitting in Si/SiGe superlattices using density functional theory (DFT). This first-principles approach is expected to provide an excellent description of interfaces, strains, and atomistic disorder without empirically fitted parameters. We benchmark atomistic tight-binding (TB) and the “ 2 k 0 ” theory within the effective mass (EM) approximation against DFT. We show that DFT supports the main conclusions of the 2 k 0 theory, but reveals some limitations of semiempirical methods such as the EM and TB, in particular about the description of atomistic disorder. The DFT calculations also highlight the effects of strong valley-orbit mixing at large valley splitting. Nevertheless, TB and the 2 k 0 theory shall provide reasonable valley splitting statistics in many heterostructures of interest for spin qubit devices.
- 20 January 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (3)
Open AccessValley splitting in Si/SiGe heterostructures from first principles
We compute valley splitting in Si/SiGe superlattices using density functional theory (DFT). This first-principles approach is expected to provide an excellent description of interfaces, strains, and atomistic disorder without empirically fitted parameters. We benchmark atomistic tight-binding (TB) and the “ 2 k 0 ” theory within the effective mass (EM) approximation against DFT. We show that DFT supports the main conclusions of the 2 k 0 theory, but reveals some limitations of semiempirical methods such as the EM and TB, in particular about the description of atomistic disorder. The DFT calculations also highlight the effects of strong valley-orbit mixing at large valley splitting. Nevertheless, TB and the 2 k 0 theory shall provide reasonable valley splitting statistics in many heterostructures of interest for spin qubit devices.
- Open Access
Valley Splittings in Si/SiGe Heterostructures from First Principles
We compute valley splittings in Si/SiGe superlattices using ab initio density functional theory (DFT). This first-principle approach is expected to provide an excellent description of interfaces, strains, and atomistic disorder without empirically fitted parameters. We benchmark atomistic tight-binding (TB) and the ``$2k_0$'' theory within the effective mass (EM) approximation against DFT. We show that DFT supports the main conclusions of the 2$k_0$ theory, but reveals some limitations of semi-empirical methods such as the EM and TB, in particular about the description of atomistic disorder. The DFT calculations also highlight the effects of strong valley-orbit mixing at large valley splittings. Nevertheless, TB and the 2$k_0$ theory shall provide reasonable valley splitting statistics in many heterostructures of interest for spin qubit devices.
Open AccessValley Splittings in Si/SiGe Heterostructures from First Principles
We compute valley splittings in Si/SiGe superlattices using ab initio density functional theory (DFT). This first-principle approach is expected to provide an excellent description of interfaces, strains, and atomistic disorder without empirically fitted parameters. We benchmark atomistic tight-binding (TB) and the ``$2k_0$'' theory within the effective mass (EM) approximation against DFT. We show that DFT supports the main conclusions of the 2$k_0$ theory, but reveals some limitations of semi-empirical methods such as the EM and TB, in particular about the description of atomistic disorder. The DFT calculations also highlight the effects of strong valley-orbit mixing at large valley splittings. Nevertheless, TB and the 2$k_0$ theory shall provide reasonable valley splitting statistics in many heterostructures of interest for spin qubit devices.
- Open Access
- 30 September 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (9)
Optical properties of vacancies in aluminum oxide from first principlesWe employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy ( V O ) and aluminum vacancy ( V Al ) in α − Al 2 O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at V O 0 to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at V O 0 . We confirm that the slowly decaying 3.0 eV emission band of the F center is due to a triplet-singlet transition at V O 0 . Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the F + center are generated by internal transitions at V O + 1 . The line shape for the excitation of an electron from V O + 1 to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with V O + 2 also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in α − Al 2 O 3 is a split-vacancy configuration V Al , s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at V Al − 3 and V Al , s − 3 sites with the CBM. The line shapes of the two V Al configurations overlap and are considerably broader than the spectra corresponding to V O .
- 30 September 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (9)
Open AccessOptical properties of vacancies in aluminum oxide from first principlesWe employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy ( V O ) and aluminum vacancy ( V Al ) in α − Al 2 O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at V O 0 to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at V O 0 . We confirm that the slowly decaying 3.0 eV emission band of the F center is due to a triplet-singlet transition at V O 0 . Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the F + center are generated by internal transitions at V O + 1 . The line shape for the excitation of an electron from V O + 1 to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with V O + 2 also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in α − Al 2 O 3 is a split-vacancy configuration V Al , s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at V Al − 3 and V Al , s − 3 sites with the CBM. The line shapes of the two V Al configurations overlap and are considerably broader than the spectra corresponding to V O .
- Open Access
- 6 August 2025
- Published by IOP Publishing in 2D Materials
- Vol. 12 (4) , 045008
Highly efficient lateral spin valve device based on graphene/hBN/Fe3GeTe2
In this work we report efficient out-of-plane spin injection and detection in an all-van der Waals based heterostructure using only exfoliated 2D materials. We demonstrate spin injection by measuring spin-valve and Hanle signals in non-local transport in a stack of Fe3GeTe2 (FGT), hexagonal boron nitride (hBN) and graphene layers. FGT flakes form the spin aligning electrodes necessary to inject and detect spins in the graphene channel. The hBN tunnel barrier provides a high-quality interface between the ferromagnetic electrodes and graphene, eliminating the conductivity mismatch problem, thus ensuring efficient spin injection and detection with spin injection efficiencies of up to P = 40%. Our results demonstrate that FGT/hBN/graphene heterostructures form a promising platform for realizing 2D van der Waals spintronic devices.
- 6 August 2025
- Published by IOP Publishing in 2D Materials
- Vol. 12 (4) , 045008
Open AccessHighly efficient lateral spin valve device based on graphene/hBN/Fe3GeTe2
In this work we report efficient out-of-plane spin injection and detection in an all-van der Waals based heterostructure using only exfoliated 2D materials. We demonstrate spin injection by measuring spin-valve and Hanle signals in non-local transport in a stack of Fe3GeTe2 (FGT), hexagonal boron nitride (hBN) and graphene layers. FGT flakes form the spin aligning electrodes necessary to inject and detect spins in the graphene channel. The hBN tunnel barrier provides a high-quality interface between the ferromagnetic electrodes and graphene, eliminating the conductivity mismatch problem, thus ensuring efficient spin injection and detection with spin injection efficiencies of up to P = 40%. Our results demonstrate that FGT/hBN/graphene heterostructures form a promising platform for realizing 2D van der Waals spintronic devices.
- 24 December 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (6)
Coherence limit due to hyperfine interaction with nuclei in the barrier material of spin qubits- 24 December 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (6)
Coherence limit due to hyperfine interaction with nuclei in the barrier material of spin qubits- Open Access
- 10 October 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (14)
Machine learning force field for thermal oxidation of silicon
Looking back at seven decades of highly extensive application in the semiconductor industry, silicon and its native oxide SiO2 are still at the heart of several technological developments. Recently, the fabrication of ultra-thin oxide layers has become essential for keeping up with trends in the down-scaling of nanoelectronic devices and for the realization of novel device technologies. With this comes a need for better understanding of the atomic configuration at the Si/SiO2 interface. Classical force fields offer flexible application and relatively low computational costs, however, suffer from limited accuracy. Ab initio methods give much better results but are extremely costly. Machine learning force fields (MLFF) offer the possibility to combine the benefits of both worlds. We train a MLFF for the simulation of the dry thermal oxidation process of a Si substrate. The training data are generated by density functional theory calculations. The obtained structures are in line with ab initio simulations and with experimental observations. Compared to a classical force field, the most recent reactive force field, the resulting configurations are vastly improved. Our potential is publicly available in an open-access repository.
- 10 October 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (14)
Open AccessMachine learning force field for thermal oxidation of silicon
Looking back at seven decades of highly extensive application in the semiconductor industry, silicon and its native oxide SiO2 are still at the heart of several technological developments. Recently, the fabrication of ultra-thin oxide layers has become essential for keeping up with trends in the down-scaling of nanoelectronic devices and for the realization of novel device technologies. With this comes a need for better understanding of the atomic configuration at the Si/SiO2 interface. Classical force fields offer flexible application and relatively low computational costs, however, suffer from limited accuracy. Ab initio methods give much better results but are extremely costly. Machine learning force fields (MLFF) offer the possibility to combine the benefits of both worlds. We train a MLFF for the simulation of the dry thermal oxidation process of a Si substrate. The training data are generated by density functional theory calculations. The obtained structures are in line with ab initio simulations and with experimental observations. Compared to a classical force field, the most recent reactive force field, the resulting configurations are vastly improved. Our potential is publicly available in an open-access repository.
- 1 July 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 110 (4) , 045201
Polaron formation in the hydrogenated amorphous silicon nitrideSilicon nitride is commonly used as the charge storage layer of nonvolatile charge trap flash (CTF) memory devices. Previous theoretical investigations have shown a large variety of possible trapping centers in which might contribute to the memory effect, including vacancies, dangling bonds, and overcoordinated atoms. So far, the high H concentration detected in silicon nitride thin films, resulting in a large number of passivated Si–H and N–H bonds, has not been considered in depth in theoretical studies regarding the charge trapping properties. In this work, we show that this passivation of dangling bonds with H gives rise to the formation of hole and electron (bi)polarons at fully coordinated sites and hole traps at Si–H bonds. We employ density functional theory combined with a hybrid functional to demonstrate that both holes and electrons can localize at intrinsic, fully coordinated sites in the amorphous :H network. We classify precursor configurations of the polaron states by analyzing bond lengths, partial charges, maximally localized Wannier functions, bond orders, and electronic states introduced in the band gap upon charge trapping. All trapping sites are characterized according to their thermodynamic properties, such as charge transition level (CTL) and relaxation energy on a statistical level. The CTLs of the (bi)polarons are in the energetic vicinity of the band edges of a Si substrate, showing that these intrinsic sites can trap charges from Si under applied voltages and contribute to the memory effect.- 1 July 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 110 (4) , 045201
Polaron formation in the hydrogenated amorphous silicon nitrideSilicon nitride is commonly used as the charge storage layer of nonvolatile charge trap flash (CTF) memory devices. Previous theoretical investigations have shown a large variety of possible trapping centers in which might contribute to the memory effect, including vacancies, dangling bonds, and overcoordinated atoms. So far, the high H concentration detected in silicon nitride thin films, resulting in a large number of passivated Si–H and N–H bonds, has not been considered in depth in theoretical studies regarding the charge trapping properties. In this work, we show that this passivation of dangling bonds with H gives rise to the formation of hole and electron (bi)polarons at fully coordinated sites and hole traps at Si–H bonds. We employ density functional theory combined with a hybrid functional to demonstrate that both holes and electrons can localize at intrinsic, fully coordinated sites in the amorphous :H network. We classify precursor configurations of the polaron states by analyzing bond lengths, partial charges, maximally localized Wannier functions, bond orders, and electronic states introduced in the band gap upon charge trapping. All trapping sites are characterized according to their thermodynamic properties, such as charge transition level (CTL) and relaxation energy on a statistical level. The CTLs of the (bi)polarons are in the energetic vicinity of the band edges of a Si substrate, showing that these intrinsic sites can trap charges from Si under applied voltages and contribute to the memory effect.- Open Access
Machine Learning Force Field for Thermal Oxidation of Silicon
Looking back at seven decades of highly extensive application in the semiconductor industry, silicon and its native oxide SiO$_2$ are still at the heart of several technological developments. Recently, the fabrication of ultra-thin oxide layers has become essential for keeping up with trends in down-scaling of nanoelectronic devices and for the realization of novel device technologies. With this comes a need for better understanding of the atomic configuration at the Si/SiO$_2$ interface. Classical force fields offer flexible application and relatively low computational costs, however, suffer from limited accuracy. Ab-initio methods give much better results but are extremely costly. Machine learning force fields (MLFF) offer the possibility to combine the benefits of both worlds. We train a MLFF for the simulation of the dry thermal oxidation process of a Si substrate. The training data is generated by density functional theory calculations. The obtained structures are in line with ab-initio simulations as well as with experimental observations. Compared to a classical force field, the most recent reactive force field (reaxFF), the resulting configurations are vastly improved.
Open AccessMachine Learning Force Field for Thermal Oxidation of Silicon
Looking back at seven decades of highly extensive application in the semiconductor industry, silicon and its native oxide SiO$_2$ are still at the heart of several technological developments. Recently, the fabrication of ultra-thin oxide layers has become essential for keeping up with trends in down-scaling of nanoelectronic devices and for the realization of novel device technologies. With this comes a need for better understanding of the atomic configuration at the Si/SiO$_2$ interface. Classical force fields offer flexible application and relatively low computational costs, however, suffer from limited accuracy. Ab-initio methods give much better results but are extremely costly. Machine learning force fields (MLFF) offer the possibility to combine the benefits of both worlds. We train a MLFF for the simulation of the dry thermal oxidation process of a Si substrate. The training data is generated by density functional theory calculations. The obtained structures are in line with ab-initio simulations as well as with experimental observations. Compared to a classical force field, the most recent reactive force field (reaxFF), the resulting configurations are vastly improved.