MYMingzhi Yu

Mingzhi Yu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mingzhi Yu has a total of 58 co-authors. Here are the top co-authors by number of shared publications:

  • Libo Zhao

    School of Instrument Science and Technology, Xi’an Jiaotong University, Xi’an, China

    12 shared publications
  • Ping Yang

    12 shared publications
  • Yanbin Wang

    State Key Laboratory for Manufacturing Systems Engineering, State Industry-Education Integration Center for Medical Innovations, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies, Shaanxi Innovation Center for Special Sensing and Testing Technology in Extreme Environments, Shaanxi Provincial University Engineering Research Center for Micro/Nano Acoustic Devices and Intelligent Systems, Xi’an Jiaotong University, Xi’an, China

    10 shared publications
  • Yao Chen

    School of Instrument Science and Technology, Xi'an Jiaotong University 1 , Xi'an 710049

    9 shared publications
  • Xiangguang Han

    8 shared publications
  • Qijing Lin

    State Key Laboratory for Manufacturing Systems Engineering, State Industry-Education Integration Center for Medical Innovations, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies, Shaanxi Innovation Center for Special Sensing and Testing Technology in Extreme Environments, Shaanxi Provincial University Engineering Research Center for Micro/Nano Acoustic Devices and Intelligent Systems, Xi’an Jiaotong University, Xi’an, China

    7 shared publications

Latest Publications

  • Open Access

    Magnetron-Sputtered MEMS Bi-Planar Coils for Chip-Scale SERF Magnetometry and Ultra-Low-Field NMR Relaxometry

    by Yao Chen, Zhipeng Sun, Yintao Ma, Yanjie Zhang, Lun Zou, Mingzhi Yu, Yanbin Wang, Libo Zhao

    Miniaturizing magnetic-field compensation for atomic spin sensors is challenging with conventional 3D wire-wound coils. We report the MEMS design, fabrication and system-level validation of bi-planar coils for a chip-scale spin-exchange relaxation-free (SERF) atomic magnetometer. Confining conductors to two parallel planes preserves full three-axis field control and makes the field accuracy lithography-limited. For an 8 mm × 8 mm footprint with 7.5 mm plane separation, finite-element analysis predicts coil constants of 81.3nT/mA (in-plane) and 438.6nT/mA (normal), with 0.2% and 0.02% non-uniformity over a 2 × 2 × 2 mm³ target volume. Coils were patterned with 40 μm traces and integrated into a 12 × 15 × 43 mm packaged head. Two independent calibrations were performed: reference-coil substitution (giving 68.2 and 396.0 nT/mA; 16.1% and 9.7% below simulation) and in-situ 129Xe free-precession calibration in a ϕ3 × 3 mm cell (yielding 74.3 and 433.6 nT/mA; within 8.6% and 1.1% of simulation). The in-situ approach removes the reference scale factor and directly samples the interrogated volume, validating the numerical model. With 1 kHz modulation, the integrated noise floor reached 38fT/Hz1/2 and enabled ULF-NMR at 100 nT, resolving water-proton precession and linear CuSO4 relaxometry down to 50 μM.

  • Open Access

    Development of a piezoresistive accelerometer with both high natural frequency and superior overload capability

    by Yong Xia, Xinyao Meng, Yang Lv, Xiangguang Han, Zhixia Qiao, Mingzhi Yu, Chen Jia, Qing Zhang, Ping Yang, Dejiang Lu, et al.


  • Open Access

    MEMS vapor cells-based Rydberg-atom electrometry toward miniaturization and high sensitivity

    by Yintao Ma, Pan Chen, Mingzhi Yu, Yao Chen, Yanbin Wang, Ju Guo, Man Zhao, Ping Yang, Qijing Lin, Libo Zhao

    Rydberg-atom electrometry, as an emerging cutting-edge technology, features high sensitivity, broad bandwidth, calibration-free operation, and beyond. However, until now the key atomic vapor cells used for confining electric field-sensitive Rydberg atoms nearly made with traditional glass-blown techniques, hindering the miniaturization, integration, and batch manufacturing. Here, we present the wafer-level MEMS atomic vapor cells with glass-silicon-glass sandwiched structure that are batch-manufactured for both frequency stability and electric field measurement. We use specially customized ultra-thick silicon wafers with a resistivity exceeding 10,000 Ω cm, three orders of magnitude higher than that of typical silicon, and a thickness of 6 mm, providing a 4-fold improvement in optical interrogation length. With the as-developed MEMS atomic vapor cell, we configured a high-sensitivity Rydberg-atom electrometry with the minimal detectable microwave field to be 2.8 mV/cm. This combination of miniaturization and sensitivity represents a significant advance in the state-of-the-art field of Rydberg-atom electrometry, paving the way for chip-scale Rydberg-atom electrometry and potentially opening up new applications in a wider variety of fields. The alternative text for this image may have been generated using AI.

  • Open Access

    Tesla-scale magnetic field measurement based on Sideband-overlap Zeeman spectroscopy using a functionalized MEMS vapor cell

    by Ju Guo, Yintao Ma, Dejiang Lu, Mingzhi Yu, Yanbin Wang, Ping Yang, Qijing Lin, Libo Zhao, Yao Chen

    Accurate measurement of strong magnetic fields in the Tesla range remains a persistent challenge due to calibration drift, nonlinearity, and spatial gradient sensitivity. Here, we present a compact magnetometry approach based on sideband-overlap Zeeman spectroscopy, enabled by a functionalized MEMS cesium vapor cell. The vapor cell features a dual-chamber glass–Si–glass structure with integrated microheaters on the optical window. A first-order electro-optic modulator produces optical sidebands aligned with the σ+ and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} $${{\rm{\sigma }}}^{-}$$σ− Zeeman-split components of the Cs D1 line under the hyperfine Paschen–Back regime. Magnetic field scanning from zero to Tesla-scale fields enables extraction of the frequency offset between reference and Zeeman-shifted spectra. This frequency shift is directly converted into magnetic field strength using Zeeman spectroscopy in the hyperfine Paschen–Back regime. The method resolves sixteen Zeeman transitions (eight \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} $${{\rm{\sigma }}}^{+}$$σ+ and eight \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} $${{\rm{\sigma }}}^{-}$$σ−), allowing measurement of a field strength of 0.6694921 T, with a single-shot resolution of 6.4 μT and a cross-transition repeatability of σB = 8.9 μT (corresponding to 13 ppm at 0.6695 T). In a millimeter-scale sensing volume, the system achieves sub-10 μT repeatability without requiring a uniform bias field. These results indicate that the microfabricated high-field magnetometer can serve as a compact and practical approach for Tesla-range field measurement and pave the way for chip-scale quantum devices.

  • Open Access

    Monolithically integrated triaxial high-performance high-g accelerometer for high shock vibration signal measurements

    by Mingzhi Yu, Xiaoyu Wu, Libo Zhao, Chen Jia, Yong Xia, Xiangguang Han, Tao Wang, Guoxi Luo

    High-g accelerometers serve as critical components in real-time monitoring systems for shock vibration analysis of blast fuzes in both penetrating and hypersonic weapon applications. While piezoresistive accelerometers can theoretically achieve both high sensitivity and broad frequency response when the piezoresistive beam (piezoresistor) undergoes pure axial deformation, previous approaches required intricate theoretical calculations and specific structural configurations to approximate pure axial deformation conditions, substantially complicating the design process. This study presents an innovative triaxial high-g piezoresistive accelerometer design featuring position-independent pure axial deformation of the piezoresistive beam, capable of measuring accelerations up to 200,000 g. The key innovation lies in the synchronized deformation mechanism at both ends of the piezoresistive beam, which effectively cancels out transverse deformation components. This novel approach eliminates the need for complex design procedures while ensuring pure axial deformation throughout the measurement range. Experimental validation demonstrates exceptional performance characteristics: an ultra-high natural frequency exceeding 1.5 MHz coupled with high sensitivity greater than 1.15 μV/g at 5 V excitation, which provides a convenient method for the design of high-performance piezoresistive accelerometers.


  • Open Access

    Correction to “Nuclear Spin Relaxation and Electric Quadrupole Frequency Shift of 129 Xe- 131 Xe in Cubic Stemless MEMS Atomic Vapor Cells”

    by Mingzhi Yu, Yanbin Wang, Yintao Ma, Yao Chen, Ju Guo, Liubo Zhang, Ping Yang, Xiangguang Han, Yang Lv, Libo Zhao

    [This corrects the article DOI: 10.1021/acsomega.5c04797.].

  • Open Access

    Nuclear Spin Relaxation and Electric Quadrupole Frequency Shift of 129Xe-131Xe in Cubic Stemless MEMS Atomic Vapor Cells

    by Mingzhi Yu, Yanbin Wang, Yintao Ma, Yao Chen, Ju Guo, Liubo Zhang, Ping Yang, Xiangguang Han, Yang Lv, Libo Zhao

    Research on the electric quadrupole frequency shift mechanism and nuclear spin relaxation of 129Xe-131Xe in alkali metal atomic vapor cells fabricated using microelectromechanical systems (MEMS) technology remains in its early stages. Therefore, an in-depth investigation in this field is crucial for enhancing the performance of miniaturized atomic gyroscopes and other quantum devices. This study provides a comprehensive analysis of the electric quadrupole frequency shift and relaxation of 129Xe-131Xe nuclear spins in a stemless cubic MEMS vapor cell. To elucidate the microscopic characteristics of wall interactions, nuclear spin quadrupole interactions with mixed silicon and glass surfaces in MEMS vapor cells were examined. The influence of the angle between the vapor cell's geometric axis and the applied magnetic field on the electric quadrupole frequency shift was investigated, leading to the determination of the vapor cell's asymmetry parameter η and the average twist angle ⟨θ⟩ of nuclear spin-wall collisions. Furthermore, the temperature dependence of the electric quadrupole frequency shift in 131Xe atoms was characterized, enabling the extraction of the desorption activation energy (E A ) of 131Xe on the MEMS vapor cell surface. By analyzing the free induction decay (FID) signals of 129Xe and 131Xe at varying temperatures, the relationship between their relaxation rates and temperature was established. These findings offer valuable insights for optimizing nuclear spin relaxation times in microatomic gyroscopes.


  • Open Access

    The fabrication of MEMS alkali metal vapor cells based on ultrafast laser welding for single beam magnetometer

    by Yanbin Wang, Mingzhi Yu, Yao Chen, Yintao Ma, Xiangguang Han, Yong Xia, Ju Guo, Ping Yang, Qijing Lin, Shujiang Ding, et al.

    The development of micro-electro-mechanical system (MEMS) alkali metal vapor cells offers the potential for the batch fabrication of micro-quantum sensors for atomic clocks, atomic magnetometers and atomic gyroscopes. The sealing of MEMS vapor cells is traditionally achieved by anodic bonding. However, high-temperature and high direct-voltage conditions during anodic bonding adversely affect the performance of the vapor cell. In this study, a fabrication method based on ultrafast laser welding integrated with a microfabrication process was developed for MEMS alkali metal vapor cells, and the energy-coupling mechanism of welding was analyzed. This method confined high temperatures to a localized area during laser welding. The cross-sections of the welding samples were analyzed, the element distribution was characterized, and the results showed that this method achieved high-strength sealing. Additionally, a platform for alkali metal injection and buffer gas charging was developed to enable the fabrication of MEMS vapor cells with ultrafast laser welding. The MEMS vapor cells were tested using absorption spectra, and the leakage rate under high-temperature vacuum conditions proved that high hermeticity could be achieved by ultrafast laser welding. Finally, MEMS vapor cells were used to fabricate a single-beam magnetometer, and its measurement sensitivity was determined experimentally. This process provides a new method for the efficient fabrication of MEMS vapor cells.


  • High Performance Novel High-g Piezoresistive Micro-Accelerometer With MHz Natural Frequency

    by Yang Lv, Shaolong Xu, Xiaowei Hou, Mingzhi Yu, Qunxin Liu, Libo Zhao, Cun Li, Xiangguang Han, Dan Liu, Jingfeng Xiong

    High-g accelerometers are the core devices for high-impact signal measurement, and microelectromechanical systems (MEMS) piezoresistive accelerometers, as the mainstream technological solution for high-g accelerometers, have serious mutual constraints on their sensitivity and natural frequency. In order to overcome the above problems, this paper proposed a MEMS accelerometer with a range of 100000g based on the pure axial deformation of piezoresistive beam. While ensuring the natural frequency of the accelerometer, the natural frequency of the sensor is substantially increased. Moreover, the structure does not require complex theoretical calculations to realize the pure axial stress state, which greatly simplifies the design process. The test results show that the proposed accelerometer has a natural frequency greater than 1 MHz and a sensitivity of 2.47 μV/g/5V, which indicates that the proposed accelerometer has high performance and can meet the needs in the field of high-impact signal measurement.


  • High-Sensitivity, Microfabricated Quantum Magnetometers With an Intelligent Solar Heating System

    by Yintao Ma, Yao Chen, Mingzhi Yu, Yanbin Wang, Ju Guo, Man Zhao, Ping Yang, Qijing Lin, Libo Zhao

    Atomic magnetometers, a prominent class of quantum sensors, have become increasingly significant in magnetometry, with extensive applications in cutting-edge physics, biomedical imaging, industrial inspection, and beyond. However, the power consumption of an atomic magnetometer is primarily dominated by that demanded to heat the atomic vapor cell to its operating temperature. This operating temperature determines the alkali-metal atomic density, thereby influencing the magnetic field sensitivity and overall power consumption, which poses a potential obstacle to the large-scale engineering application of atomic magnetometers. In this article, a novel heating method utilizing renewable solar energy is proposed for the first time, which can surpass the limitation of conventional heating methods in thermo-atom-based quantum sensors. By exploiting an intelligent closed-loop control system to adaptively regulate the functionalized sunlight power, this proposed method has the capability of both high heating efficiency and accuracy. The heating properties and laser absorption spectrum at different temperatures up to 180 °C are characterized substantiating the feasibility of utilizing sunlight. Moreover, a sunlight-heated, highly sensitive, microfabricated atomic magnetometer with a magnetic field sensitivity of 18 fT/Hz 1/2 is demonstrated. And the single-chamber microelectromechanical system atomic vapor cell as the key component is fabricated by utilizing deep silicon micromachining and anodic bonding techniques. This proposed technique can be further extended to all quantum sensing systems based on thermal atomic ensembles and open up new possibilities for the development of self-powered, environmentally friendly quantum sensors.