ASAman Srivastava

Aman Srivastava

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aman Srivastava has a total of 394 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The indian pulsar timing array data release 2: II. Customised single-pulsar noise analysis and noise budget

    by K. Nobleson, Churchil Dwivedi, Shantanu Desai, Bhal Chandra Joshi, Himanshu Grover, Debabrata Deb, Vaishnavi Vyasraj, Kunjal Vara, Hemanga Tahbildar, Abhimanyu Susobhanan, et al.


  • Open Access

    Revisiting wideband pulsar timing measurements

    by Abhimanyu Susobhanan, Avinash Kumar Paladi, Réka Desmecht, Amarnath, Manjari Bagchi, Manoneeta Chakraborty, Shaswata Chowdhury, Suruj Jyoti Das, Debabrata Deb, Shantanu Desai, et al.

    In the wideband paradigm of pulsar timing, the time of arrival of a pulsar pulse is measured simultaneously with the corresponding dispersion measure from a frequency-resolved integrated pulse profile. We present a new method for performing wideband measurements that rigorously accounts for measurement noise. We demonstrate this method using observations of PSR J2124−3358 made as part of the Indian Pulsar Timing Array experiment using the upgraded Giant Metre-wave Radio Telescope, and show that our method produces more realistic measurement uncertainty estimates compared to the existing wideband measurement method.


  • Effects of coronal mass ejection on PSR J1022+1001 and possible mode change of PSR J2145 - 0750 in the InPTA DR2

    by Shaswata Chowdhury, M.A. Krishnakumar, Manjari Bagchi, Bhal Chandra Joshi, Nobleson K, Jibin Jose, Shantanu Desai, Manpreet Singh, Vaishnavi Vyasraj, Kuldeep Meena, et al.


  • Open Access

    Combining the second data release of the European Pulsar Timing Array with low-frequency pulsar data

    by F. Iraci, A. Chalumeau, C. Tiburzi, J. P. W. Verbiest, A. Possenti, S. C. Susarla, M. A. Krishnakumar, G. M. Shaifullah, J. Antoniadis, M. Bagchi, et al.

    Context. Low radio frequency data are highly valuable for enhancing the sensitivity of pulsar timing arrays (PTAs) to propagation effects, such as dispersion measure (DM) variations. These low-frequency observations are particularly sensitive to DM fluctuations and can therefore significantly improve noise characterization in PTA datasets, which is essential for detecting the stochastic gravitational wave background (GWB). Aims. For this work we incorporated for the first time low-frequency observations from LOFAR (100 − 200 MHz) and NenuFAR (30 − 90 MHz) into a PTA context by combining them with the most recent data release from the European and Indian PTAs (in particular, with the subsample labeled DR2new+ , which includes only data from the new backends). This new combined dataset, labeled DR2low , consists of 12 pulsars observed over a time span of ∼11 years, with radio frequencies spanning the range 30 − 2500 MHz. The expanded frequency coverage of DR2low enables us to update and refine the noise models of DR2new+ , and this is crucial in order to increase the PTA sensitivity when searching for the stochastic gravitational wave background, which is the primary goal of PTA observations. This work is a milestone in the integration of low-frequency data into the upcoming third data release of the International PTA, which is posed to achieve the 5 σ detection of the GWB. Methods. We used the pulsar timing software packages L IBSTEMPO and E NTERPRISE to perform a noise analysis of DR2low . At first, we applied a standard noise model including red noise (RN) and time-variable dispersion measure (DMv) as power laws, with Fourier components up to 30 and 100 frequencies, respectively. Next, we performed a fully Bayesian model selection to identify the favored noise model for each pulsar and compute the Bayes factors across all combinations of RN, DMv, and a noise term with a chromatic index of 4 (CN 4 ). Finally, we carried out a detailed analysis on the choice of the chromatic index for CN 4 and the contribution of the solar wind. Results. The comparison between DR2low and DR2new+ using the standard noise model highlights the benefits of including low-frequency data. In particular, the additional frequency coverage improves the constraints on the DM variations and helps disentangle the DM and RN noise components in most pulsars. Through a Bayesian model selection, we found that the RN is required in the final model for 10 out of 12 pulsars, compared to only 5 in the DR2new+ dataset. The improved sensitivity to plasma effects provided by DR2low also favors the identification of significant CN 4 in eight pulsars, while none showed such evidence in DR2new+ . The chromatic index of this process is consistent with four of the five pulsars, while two (PSRs J0030+0451 and J1022+1001) show significant deviations from such a value. We attribute this discrepancy to unmodeled contributions from the solar wind, especially because of the high DM sensitivity of LOFAR and NenuFAR and the high observing cadence provided by these datasets near solar conjunction. A dedicated analysis confirms that the current solar wind model fails to fully capture the observed delay, and residual power is absorbed into the DM component of the model.


  • Open Access

    Combining the second data release of the European Pulsar Timing Array with low-frequency pulsar data

    by F. Iraci, A. Chalumeau, C. Tiburzi, J. P. W. Verbiest, A. Possenti, S. C. Susarla, M. A. Krishnakumar, G. M. Shaifullah, J. Antoniadis, M. Bagchi, et al.

    Low-frequency radio data improve the sensitivity of pulsar timing arrays (PTAs) to propagation effects such as dispersion measure (DM) variations, enabling better noise characterization essential for detecting the stochastic gravitational wave background (GWB). We combined LOFAR (100-200 MHz) and NenuFAR (30-90 MHz) observations with the recent European and Indian PTA release (DR2new+) into a new dataset, DR2low, spanning ~11 years for 12 pulsars. DR2low allows updated noise models, increasing PTA sensitivity to the GWB. Using Libstempo and Enterprise, we applied standard noise models including red noise (RN) and time-variable DM (DMv) as power laws, and performed Bayesian model selection over RN, DMv, and an additional chromatic noise term (CN4). Compared to DR2new+, DR2low improves DM constraints and separates DM and RN contributions. We found that the RN is required in the final model for 10 out of 12 pulsars, compared to only 5 in the DR2new+ dataset. The improved sensitivity to plasma effects provided by DR2low also favors the identification of significant CN4 in eight pulsars, while none showed such evidence in DR2new+. The analysis also reveals unmodelled solar wind effects, particularly near solar conjunction, with residual delays absorbed into the DM component, highlighting the importance of accurately modelling the solar wind in PTA datasets.

  • Open Access

    The Indian Pulsar Timing Array data release 2: I. Dataset and timing analysis

    by Prerna Rana, Pratik Tarafdar, K. Nobleson, Churchil Dwivedi, Bhal Chandra Joshi, Debabrata Deb, Sushovan Mondal, M. A. Krishnakumar, Adya Shukla, Jaikhomba Singha, et al.

    The Indian Pulsar Timing Array (InPTA) employs unique features of the upgraded Giant Metrewave Radio Telescope (uGMRT) to monitor dozens of the International Pulsar Timing Array (IPTA) millisecond pulsars (MSPs), simultaneously in the 300–500 MHz and the 1260–1460 MHz bands. This dual-band approach ensures that any frequency-dependent delays are accurately characterised, significantly improving the timing precision for pulsar observations, which is crucial for pulsar timing arrays. We present details of InPTA’s second data release that involves 7 yr of data on 27 IPTA MSPs. This includes sub-banded times of arrival (ToAs), dispersion measures (DM), and initial timing ephemerides for our MSPs. A part of this dataset, originally released in InPTA’s first data release, is being incorporated into IPTA’s third data release, which is expected to detect and characterise nanohertz gravitational waves (GWs) in the coming years. The entire dataset is reprocessed in this second data release providing some of the highest precision DM estimates so far and interesting solar wind-related DM variations in some pulsars. This is likely to characterise the noise introduced by the dynamic inter-stellar ionised medium much better than the previous release thereby increasing sensitivity to any future GW search.


  • Top Cited Papers
    Open Access

    The second data release from the European Pulsar Timing Array

    by J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A.-S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, et al.

    We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favour of the presence of the CGW over a common uncorrelated noise process. In contrast, the frequentist analysis estimates the p-value of the candidate to be $< 1<!PCT!>$, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only $0.7$. Therefore, we cannot conclusively determine the origin of the observed feature, nor can we rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations for the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature.


  • Top Cited Papers
    Open Access

    The second data release from the European Pulsar Timing Array

    by EPTA Collaboration and InPTA Collaboration, J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A.-S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, et al.

    The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases, respectively, with the correlation properties of a gravitational wave background (GWB). Such a signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings, and tensor mode generation by the non-linear evolution of scalar perturbations in the early Universe; and oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, for this paper, we consider each process separately, and investigated the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this would be the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy.


  • Top Cited Papers
    Open Access

    Comparing Recent Pulsar Timing Array Results on the Nanohertz Stochastic Gravitational-wave Background

    by G. Agazie, J. Antoniadis, A. Anumarlapudi, A. M. Archibald, P. Arumugam, S. Arumugam, Z. Arzoumanian, J. Askew, S. Babak, M. Bagchi, et al.

    The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational-wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within 1σ. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we “extended” each PTA’s data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings–Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA’s Data Release 3, which will involve not just adding in additional pulsars but also including data from all three PTAs where any given pulsar is timed by more than a single PTA.


  • Open Access

    Low-frequency pulse-jitter measurement with the uGMRT I : PSR J0437$-$4715

    by Tomonosuke Kikunaga, Shinnosuke Hisano, Neelam Dhanda Batra, Shantanu Desai, Bhal Chandra Joshi, Manjari Bagchi, T. Prabu, Keitaro Takahashi, Swetha Arumugam, Adarsh Bathula, et al.

    High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of the Indian Pulsar Timing Array experiment. We were able to detect jitter in both the 300 - 500 MHz and 1260 - 1460 MHz observations of the upgraded Giant Metrewave Radio Telescope (uGMRT). The former is the first jitter measurement for this pulsar below 700 MHz, and the latter is in good agreement with results from previous studies. In addition, at 300 - 500 MHz, we investigated the frequency dependence of the jitter by calculating the jitter for each sub-banded arrival time of pulses. We found that the jitter amplitude increases with frequency. This trend is opposite as compared to previous studies, indicating that there is a turnover at intermediate frequencies. It will be possible to investigate this in more detail with uGMRT observations at 550 - 750 MHz and future high sensitive wideband observations from next generation telescopes, such as the Square Kilometre Array. We also explored the effect of jitter on the high precision dispersion measure (DM) measurements derived from short duration observations. We find that even though the DM precision will be better at lower frequencies due to the smaller amplitude of jitter noise, it will limit the DM precision for high signal-to-noise observations, which are of short durations. This limitation can be overcome by integrating for a long enough duration optimised for a given pulsar.