GJGabriel Jiga

Gabriel Jiga

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gabriel Jiga has a total of 36 co-authors. Here are the top co-authors by number of shared publications:

  • Andrei Cucu

    Faculty of Industrial Engineering and Robotics Robots and Manufacturing Systems Bucharest Romania

    2 shared publications
  • Mihai Costea

    Faculty of Industrial Engineering and Robotics Strength of Materials Department National University of Science and Technology POLITEHNICA Bucharest Bucharest Romania

    2 shared publications
  • Nicoleta Elisabeta Pascu

    Department of Robots and Manufacturing Systems National University of Science and Technology POLITEHNICA Bucharest Splaiul Independenței 313 București 060042 Romania

    2 shared publications
  • Patricia Isabela Brăileanu

    Department of Robotics and Manufacturing Systems, Faculty of Industrial Engineering and Robotics, National University of Science and Technology POLITEHNICA Bucharest, 060042 Bucharest, Romania

    2 shared publications
  • Tiberiu Gabriel Dobrescu

    Department of Robots and Manufacturing Systems National University of Science and Technology POLITEHNICA Bucharest Splaiul Independenței 313 București 060042 Romania

    2 shared publications
  • Constantin Stochioiu

    Faculty of Industrial Engineering and Robotics Strength of Materials Department Bucharest Romania

    1 shared publication

Latest Publications

  • Influence of Wall Thickness on the Impact Behavior of 3D Printed Gyroid Lattices for Paragliding Protectors

    by Andrei Cucu, Gabriel Jiga, Mihai Costea

    This paper presents an experimental investigation on the impact performance of 3D‐printed gyroid lattice structures with varying wall thicknesses. The aim of this article is to evaluate the energy absorption capacity at impact and its potential application in paragliding safety equipment. The test specimens, designed as 60 mm cubes composed of eight 30 mm gyroid unit cells, are manufactured from TPU 95A using FDM technology. Five wall thicknesses, ranging from 0.6 to 1 mm, are tested. Impact experiments are performed on an INSTRON CEAST 9340 drop‐weight system, and the force–time dependence is analyzed to assess the structural response. The 0.9 mm configuration shows the best performance, combining low peak force with stable, progressive deformation and no material failure—key features for protective applications. These findings highlight the viability of gyroid‐based designs for energy‐absorbing structures and pave the way for further studies involving alternative lattice geometries, different material types, and comparisons with existing foam‐based protectors.

  • Influence of Cell Size on the Mechanical Performance of Al‐Pla Sandwich Specimens Subjected to Three‐Point Bending

    by Giulia‐Maria Man, Gabriel Jiga, Andrei Cucu, Constantin Stochioiu

    In this paper, the authors analyze, based on the optimal ratio between strength and weight of the core in a sandwich panel, the performance of an Al‐PLA composite material subjected to three‐point bending. The studied panel consists of aluminum face sheets with a thickness of 0.5 mm, while the core is manufactured using FDM (Fused Deposition Modeling) 3D printing technology, employing polylactic acid (PLA). The study focuses on five specimens, all featuring a hexagonal honeycomb core structure, with the main variable being cell size, which directly influences core density. The primary objective of this research is to determine the most efficient core configuration that ensures an optimal balance between mechanical strength and structural weight. The study investigates how variations in hexagon size affect the panel's behavior under three‐point bending loads, considering the impact on mechanical performance and material efficiency. Furthermore, the research highlights the importance of using lightweight materials such as PLA and advanced 3D printing technologies to develop efficient and sustainable structures with reduced costs and superior mechanical properties.

  • Finite Element Analysis of the Performance and Structural Behavior of Polymers Embedded in the Structure of an Exo‐Prosthesis

    by Mihai Costea, Gabriel Jiga, Stefanos Zaoutsos, Lykourgos Kontaxis, David Dragomir, Victor‐Andrei Alexandru

    This study presents a numerical‐based methodology for the integration of polymer materials as key components of an upper limb Exo‐prosthesis. The approach focuses on the use of carbon fiber‐reinforced poly‐lactic acid (PLA+CF), fabricated using additive manufacturing, for the distal phalanges and metacarpal elements. Material integration is achieved through finite element method (FEA) simulations, enabling the evaluation of structural behavior under dynamic loading conditions and ensuring compatibility with biomechanical requirements. The work validates the entire numerical model, including structural performance and material behavior, providing a comprehensive evaluation of the Exo‐prosthesis design. The validation of the numerical model is highlighted using a dynamic analysis based on the finite element method (FEA). By examining the structural behavior under various external loads, the manufacturing method and the type of material used in the prosthesis construction are assessed. The structural analysis of the components constituting the designed system is crucial, as it aids in identifying regions subjected to significant stresses. Advanced FEA simulations are employed not only to validate the overall design but also to optimize the prototype when effective stresses impact the structural integrity of the device.

  • Open Access

    Mechanical Behavior of Post‐Cured SLA Printed Resins

    by Cristina Vasilica Icociu, Ionuț Cristian Perederic, Nicoleta Luminița CăruțașU, Gabriel Jiga, Patricia Isabela Brăileanu, George CăruțașU, Nicoleta‐Elisabeta Pascu

    The tensile and compressive behavior of 3D printed resins is crucial for their applications in engineering and manufacturing. This study comprehensively evaluates the mechanical properties of two distinct types of resin materials: grey and colorless 3D printed with SLA (Stereolithography) technology. Conducting both compression and tensile tests, the investigation delves into their behavior under different loading conditions. Compression tests, yielded parameters such as modulus of elasticity ( E ) and maximum compressive stress ( σ ), thus providing insights into the material's response to compressive forces. The compression procedure did not strictly follow traditional standards such as ASTM D695 or ISO 604, as these norms offer a solid reference framework but do not fully address the specific objectives and geometrical constraints of the present study. Additionally, tensile tests were conducted according to ASTM D638–14 standards, elucidating the properties like tensile strain, force at break, and tensile stress at break.

  • Prince Rupert's Drops—The Influence of Glass Type on the Mechanical Properties

    by Francesca‐Rosemarie Zgreabăn, Ioan‐Matei Bujoreanu, Gabriel Jiga

    The study explores the mechanical properties of Prince Rupert's Drops (also known as Batavia's Tears), with a focus on how the glass used influences their strength and fracture behavior. We produced drops from two different glass compositions: soda‐lime and borosilicate. Through compression and impact testing, the results highlight the role of thermal stress distribution and material properties. Significant differences in the mechanical performance of the drops are revealed depending on the glass type, showing the connection between rapid cooling, internal stresses and fracture mechanics in brittle materials.

  • Open Access

    3D Printed Watch Straps Manufactured with TPU Materials and the Influence of Infill Printing Characteristics on the Mechanical Tensile Behaviors

    by Patricia Isabela Braileanu, Nicoleta Elisabeta Pascu, Tiberiu Gabriel Dobrescu, Gabriel Gheorghe Jiga

    Wrist watches have accompanied people in the most important moments since the 1810s and have undergone an esthetic and mechanical transformation process to align with safety standards and regulations depending on the destination of each type of wrist watch. This article aims to determine the influence of the filling percentage and the most common filling geometry pattern on the mechanical tensile behavior of a watch bracelet model manufactured from flexible filament. The comparative study is carried out on samples with two different filling percentages, manufactured by using the FDM technology from a thermoplastic material polyether‐polyurethane elastomer (TPU) with a hardness scale of 82A and thermoplastic elastomer (TPU) with a hardness scale of 93A, these being subsequently subjected to two‐direction traction tests with the aim of determining the braking strap models resistance depending on the material hardness, thus, creating the prerequisites for finding a solution to increase the durability of the custom made watch straps from TPU through FDM technology.


  • Open Access

    Preliminary Design of a Lightweight Composite Backing Structure for a Satellite Antenna

    by Emil Nutu, Ionut Sebastian Vintila, Florin Stuparu, George Pelin, Gabriel Gheorghe Jiga

    The paper consists of a preliminary design and analysis of a lightweight composite backing structure for a side deployable solid mesh reflector intended for telecom application in the Ka‐Band. As the entire antenna reflector must withstand the forces related to the launching loads, the focus is addressed to the stiffness of the composite backing structure, so that the reflective metallic mesh will not be affected during launching phase, thus with no influence over the possible deformation of the mesh and on its radio frequency performance. It is shown that the proposed concept withstands the imposed launching requirements with a compromise on mass properties.

  • Redesign of a Metallic Component Using Polylactic Acid – PLA by Fused Deposition Modeling – FDM for Durability Increase

    by Gabriel Jiga, Daniel‐Eugeniu Crunţeanu, Tiberiu Gabriel Dobrescu, Patricia Isabela Brăileanu, Nicoleta Elisabeta Pascu

    The term “3D printing” can refer to a variety of processes where material is deposited, joined, or solidified under computer control to create a three‐dimensional (3D) object. According to this principle, the material is added (such as fluid molecules or powder grains being fused together), typically layer by layer. One of the key advantages of 3D printing is the ability to produce very complex shapes or geometries, from the simplest to the most complex, that will be otherwise impossible to construct by hand, including hollow parts or parts with internal truss structures to reduce weight. In industries and companies where 3D printing is still a relatively new addition, the polylactic acid (PLA) material is the best option, because it is known in the industry as the easiest filament material to print. It is ideal for those who are looking to carry out fast prototyping, therefore it is the perfect choice for quick work. In this article, the authors intend to establish a set of printing rules for a geometric shape made of polymeric material (PLA) through the 3D printing process for a practical application and to present as much as possible the behavior in time of this printed component that replaces a non‐corrosive metal component.

  • Survey on the Advantages of Metal 3D Printing Using Laser Sintering Compared to Traditional Metal Manufacturing Methods

    by Cătălin‐Stefan Negrea, Gabriel Jiga, Mircea Gabriel Burtoiu, Gabriela Dinu

    Additive manufacturing (AM) is a niche process that has seen extensive growth and adoption in the past decade in the industrial sector. Among the AM techniques present on the market today there are identified only a few methods allowing the 3D printing of metallic materials to be of special interest for their applications in various domains like the automotive, aeronautical, and healthcare industries. The most important questions needing answers are how to produce components from metallic materials that have superior qualities like versatility, wear resistance, ease of customization, and ease of integration with existing components. Compared to traditional metalworking methods where it has been studied how the metal behaves and morphs during the process and where it is known exactly what to do in order to modify the properties of the resulting component into a favor metal, AM changes everything, forcing a researcher to start from the beginning. While the technology is starting to be used more and more, the need to find production methods leads to consistent quality products and with outstanding material properties. New methods need to be developed to help attune the properties of the 3D printed parts to the requirements of their respective uses. The present study refers to 3D metal additive manufacturing (MAM), providing an overview on the process itself and its possible results as well as hurdles with added methods to overcome them.


  • Open Access

    Tensile Behavior of PLA and PLA Composite Materials Under Different Printing Parameters

    by Tiberiu Dobrescu, Nicoleta-Elisabeta Pascu, Gabriel Jiga, Ionel Simion, Victor Adir, George Enciu, Daniela Ioana Tudose

    Polylactic acid (PLA) is one of the most extensively used biodegradable aliphatic polyester produced from renewable resources, such as corn starch. Due to its qualities, PLA is a leading biomaterial for numerous applications in medicine as well as in industry, replacing conventional petrochemical - based polymers. The purpose of this paper is to highlight the mechanical properties, such as tensile stress, of pure PLA specimens in comparison with PLA based-composites, with three different added materials in PLA mass: Copper, Aluminum and Graphene, as well as the influence of filament angle deposition on these properties. In order to check if the the filling density of the specimen influences the ultimate tensile stress (UTS), three different filling percentages (60%, 80% and 100%) have been chosen in the experimental tests. In this context, the mechanical characteristics of four different filament types based on PLA material, starting from pure PLA to PLA with Aluminum, Copper or Graphene filler are compared. Understanding and controlling these parameters is essential for the successful use of PLA and PLA-based composites in different areas such as medical applications, sport equipments and light industry.These tests have been performed due to the fact there is a lack of information concerning the mechanical properties. In the scientific literature, such information is only available for expensive printing systems; for open source printers (as those used in these tests), the information is poor and for some new materials, even inexistant. According to the technical specifications, for an expensive printer the cost may exceed 3000 Euros, with a minimum layer resolution of 100 m, this type of printer can reliably reproduce many 3D objects accurately, in quiter conditions.