Martin Ostermann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Martin Ostermann has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Eliza Biala
University of Stuttgart
2 shared publications - Ali Zolfaghari
Www.cambridge.org/btd ITECH Uni Stuttgart Germany
1 shared publication - Eliza Biala
University of Stuttgart
1 shared publication - Jan Knippers
Institute of Building Structures and Structural Design (ITKE), University of Stuttgart, Stuttgart, Germany
1 shared publication Kalai Amudhan
University of Stuttgart
1 shared publication- Kalaivanan Amudhan
Eindhoven University of Technology
1 shared publication
Latest Publications
- Open Access
- 27 May 2025
- Published by Cambridge University Press (CUP) in Cambridge Open Engage
Design’n’Grow Studio - explorations in upscaled biofabrication
Scaling up mycelium Engineered Living Materials (ELMs) presents opportunities and challenges for architectural design, particularly in understanding scale-related and unrelated properties of constructing with living materials. While Mycelium-Based Composites (MBCs) offer promising physical properties and environmental benefits , their scalability remains underexplored. Previous studies (Le Ferrand, 2024; Elsacker, 2022; Ross, 2016) identified oxygen and carbon dioxide penetration as limiting factors, constraining mycelium growth beyond a depth of 15 cm. Bio-welding techniques have enabled the creation of larger blocks (400 × 550 × 400 mm) (Elsacker, 2022), addressing some of these challenges. This research employs a hands-on experimental approach, constructing large-scale (200 × 80 cm) demonstrators to investigate bio-welding and air penetration constraints. Moving beyond volumetric mass, the study explores speculative fabrication strategies for facade panels, allowing for geometric customization within the biofabrication process. Three methods were tested: (1) sacrificial molding with textile sheets, (2) bio-welding of textile-mycelium filaments, and (3) bio-welding of mycelium blocks. Using a consistent mycelium mixture (80 wt% sawdust, 20 wt% straw, and Ganoderma lucidum), additional additives (2 wt% guar gum, 1 wt% psyllium husk) facilitated extrusion-based filament production. Results showed successful large-scale mycelium growth with minimal contamination. Method (1) yielded strong bio-welding but posed drying challenges. Method (2) faced alignment and humidity control issues, while method (3) demonstrated partial success but structural weaknesses. The study highlights grassroots experimentation’s potential in scaling up MBCs while underscoring the need for further research into process refinement and scientific rigor.
- 27 May 2025
- Published by Cambridge University Press (CUP) in Cambridge Open Engage
Open AccessDesign’n’Grow Studio - explorations in upscaled biofabrication
Scaling up mycelium Engineered Living Materials (ELMs) presents opportunities and challenges for architectural design, particularly in understanding scale-related and unrelated properties of constructing with living materials. While Mycelium-Based Composites (MBCs) offer promising physical properties and environmental benefits , their scalability remains underexplored. Previous studies (Le Ferrand, 2024; Elsacker, 2022; Ross, 2016) identified oxygen and carbon dioxide penetration as limiting factors, constraining mycelium growth beyond a depth of 15 cm. Bio-welding techniques have enabled the creation of larger blocks (400 × 550 × 400 mm) (Elsacker, 2022), addressing some of these challenges. This research employs a hands-on experimental approach, constructing large-scale (200 × 80 cm) demonstrators to investigate bio-welding and air penetration constraints. Moving beyond volumetric mass, the study explores speculative fabrication strategies for facade panels, allowing for geometric customization within the biofabrication process. Three methods were tested: (1) sacrificial molding with textile sheets, (2) bio-welding of textile-mycelium filaments, and (3) bio-welding of mycelium blocks. Using a consistent mycelium mixture (80 wt% sawdust, 20 wt% straw, and Ganoderma lucidum), additional additives (2 wt% guar gum, 1 wt% psyllium husk) facilitated extrusion-based filament production. Results showed successful large-scale mycelium growth with minimal contamination. Method (1) yielded strong bio-welding but posed drying challenges. Method (2) faced alignment and humidity control issues, while method (3) demonstrated partial success but structural weaknesses. The study highlights grassroots experimentation’s potential in scaling up MBCs while underscoring the need for further research into process refinement and scientific rigor.
- Open Access
- 27 May 2025
- Published by Cambridge University Press (CUP) in Cambridge Open Engage
Living Tex’Celium: Exploring Sustainable Architectural Practices unique to Mycelium-Textile Composites
This research investigates the sustainable potential of MBCs in creating a fully recyclable building system, emphasizing their unique properties, including integration with natural-textiles, bio-welding, and onsite soft-fabrication. It explores textile jacketing & cultivation of mycelium in thin cross-sections to optimize growth by enhancing airflow & oxygen absorption. This integration offers greater flexibility in shaping components, enabling designers to digitally predict, control form & welding through a computational workflow. Textile jacketing enhances performance by facilitating efficient bio-welding through porous surface-to-surface overlaps, strengthening connection between units. Alternative physical testing & digital simulation establish a reliable digital twin, allowing for simulation of various aggregation strategies and corresponding structural performance. This process redefines conventional construction methods, presenting a compelling alternative to tolerance-based assemblies & standard joineries, uniquely suited to MBCs. The application is demonstrated through soft, flexible Tex’celium modules, fabricated in a controlled lab environment & designed for digitally guided, on-site (gravity-based) aggregation. As mycelium within components grows & bio-welds, it forms strong structural connections while maintaining shape post-curing. Findings are validated through a bridge cross-section, grown to a thickness of 12cm, clear span of 2m & an overall height of 0.7m. The cured demonstrator weighed 24kg and withstood a load of 108kg -4.5 times its self-weight without failure, underscoring its favorable load-bearing characteristics. Additionally, a process was developed to shred & regrow components into new composites within seven days, ensuring zero waste. This research thus establishes a novel building-system tailored to MBCs, based on their unique growth-based properties to advance sustainable architectural practices
- 27 May 2025
- Published by Cambridge University Press (CUP) in Cambridge Open Engage
Open AccessLiving Tex’Celium: Exploring Sustainable Architectural Practices unique to Mycelium-Textile Composites
This research investigates the sustainable potential of MBCs in creating a fully recyclable building system, emphasizing their unique properties, including integration with natural-textiles, bio-welding, and onsite soft-fabrication. It explores textile jacketing & cultivation of mycelium in thin cross-sections to optimize growth by enhancing airflow & oxygen absorption. This integration offers greater flexibility in shaping components, enabling designers to digitally predict, control form & welding through a computational workflow. Textile jacketing enhances performance by facilitating efficient bio-welding through porous surface-to-surface overlaps, strengthening connection between units. Alternative physical testing & digital simulation establish a reliable digital twin, allowing for simulation of various aggregation strategies and corresponding structural performance. This process redefines conventional construction methods, presenting a compelling alternative to tolerance-based assemblies & standard joineries, uniquely suited to MBCs. The application is demonstrated through soft, flexible Tex’celium modules, fabricated in a controlled lab environment & designed for digitally guided, on-site (gravity-based) aggregation. As mycelium within components grows & bio-welds, it forms strong structural connections while maintaining shape post-curing. Findings are validated through a bridge cross-section, grown to a thickness of 12cm, clear span of 2m & an overall height of 0.7m. The cured demonstrator weighed 24kg and withstood a load of 108kg -4.5 times its self-weight without failure, underscoring its favorable load-bearing characteristics. Additionally, a process was developed to shred & regrow components into new composites within seven days, ensuring zero waste. This research thus establishes a novel building-system tailored to MBCs, based on their unique growth-based properties to advance sustainable architectural practices
- Open Access
- 4 November 2022
- Published by Springer Nature in Architecture, Structures and Construction
- Vol. 2 (4) , 509-519
Mycostructures—growth-driven fabrication processes for architectural elements from mycelium composites
The paper discusses how characteristics of the mycelium growth process—namely different growth effectiveness depending on the nutrition content of the substrate, gradual solidification of the inoculated substrate, and bio-welding—can be a driving force for developing sustainable biofabrication processes of mycelium based composites (MBC) for architectural application. To explore this potential one-semester (12 weeks) seminar and one block seminar (2 weeks) with master-level students were held at the University of Stuttgart, and independent work within the Institute IBK2 was performed. The free experimentation with fabrication tactics resulted in the emergence of different investigation paths, tested with small-scale demonstrators, from which the most interesting three this paper presents in detail. The first is the two-phase printing process of mycelium substrate and subsidiary reusable support materials. It applied tests with the small, inorganic, loose substances (plastic pellets) extractable mechanically and meltable substances (wax) extracted by heating. The second path of investigation followed lost formworks created from hemp strings positioned inside the material. Finally, the third path is a particular case of lost formwork approach utilizing different tubular bandages stuffed with MBC and utilizing it later as a thick filament for other different form-giving deposition practices: layering, hanging, braiding, and knotting. All three investigation paths prove feasible, although their upscaling potential correlates strongly with the successful automation of the processes using CNC machines, which could provide the precision and sterility needed for this highly heterogenous and sensitive material. In addition, further developments in the material cultivation protocols are indispensable to provide a higher repetition of the results.
- 4 November 2022
- Published by Springer Nature in Architecture, Structures and Construction
- Vol. 2 (4) , 509-519
Open AccessMycostructures—growth-driven fabrication processes for architectural elements from mycelium composites
The paper discusses how characteristics of the mycelium growth process—namely different growth effectiveness depending on the nutrition content of the substrate, gradual solidification of the inoculated substrate, and bio-welding—can be a driving force for developing sustainable biofabrication processes of mycelium based composites (MBC) for architectural application. To explore this potential one-semester (12 weeks) seminar and one block seminar (2 weeks) with master-level students were held at the University of Stuttgart, and independent work within the Institute IBK2 was performed. The free experimentation with fabrication tactics resulted in the emergence of different investigation paths, tested with small-scale demonstrators, from which the most interesting three this paper presents in detail. The first is the two-phase printing process of mycelium substrate and subsidiary reusable support materials. It applied tests with the small, inorganic, loose substances (plastic pellets) extractable mechanically and meltable substances (wax) extracted by heating. The second path of investigation followed lost formworks created from hemp strings positioned inside the material. Finally, the third path is a particular case of lost formwork approach utilizing different tubular bandages stuffed with MBC and utilizing it later as a thick filament for other different form-giving deposition practices: layering, hanging, braiding, and knotting. All three investigation paths prove feasible, although their upscaling potential correlates strongly with the successful automation of the processes using CNC machines, which could provide the precision and sterility needed for this highly heterogenous and sensitive material. In addition, further developments in the material cultivation protocols are indispensable to provide a higher repetition of the results.