EBEliza Biala

Eliza Biala

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eliza Biala has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Scaling-up biodesign – weaving logic of mycelium-based-composite architecture

    by Eliza Biala, Anne-Kathrin Kühner, Piotr Baszynski, Martin Ostermann

    Mycelium-based composites (MBC) proved to be the one of the first biofabricated materials that can be implemented directly in architectural and interior design settings. The study presents a novel method of MBC biofabrication, which functionalises filaments of MBC stabilised by textile-net tubes as weft, woven on the cotton string warp. Cotton strings are arranged spatially by hanging to allow for three-dimensional formations and physical gravity-based finding of the optimal form. The demonstrators are the subsequent upscaling attempt after initial small-scale (30–60 cm height) proof-of-concept prototypes (Biale et al., 2026), which proved feasible. The goal of the study was to understand better the interplay and interdependencies of the process’s parameters in all of the biofabrication phases (filament production, assembly, water transfer and skin formation during growth, contamination prevention, drying and shrinking) in the (case of bigger demonstrators 120 cm height) cultivated in semi-sterile conditions. The study has developed an understanding of which aspects become more significant as the element’s size increases and has verified the feasibility of this biofabrication method for future upscaling efforts.

  • Open Access

    Design’n’Grow Studio - explorations in upscaled biofabrication

    by Eliza Biala, Kalai Amudhan, Martin Ostermann

    Scaling up mycelium Engineered Living Materials (ELMs) presents opportunities and challenges for architectural design, particularly in understanding scale-related and unrelated properties of constructing with living materials. While Mycelium-Based Composites (MBCs) offer promising physical properties and environmental benefits , their scalability remains underexplored. Previous studies (Le Ferrand, 2024; Elsacker, 2022; Ross, 2016) identified oxygen and carbon dioxide penetration as limiting factors, constraining mycelium growth beyond a depth of 15 cm. Bio-welding techniques have enabled the creation of larger blocks (400 × 550 × 400 mm) (Elsacker, 2022), addressing some of these challenges. This research employs a hands-on experimental approach, constructing large-scale (200 × 80 cm) demonstrators to investigate bio-welding and air penetration constraints. Moving beyond volumetric mass, the study explores speculative fabrication strategies for facade panels, allowing for geometric customization within the biofabrication process. Three methods were tested: (1) sacrificial molding with textile sheets, (2) bio-welding of textile-mycelium filaments, and (3) bio-welding of mycelium blocks. Using a consistent mycelium mixture (80 wt% sawdust, 20 wt% straw, and Ganoderma lucidum), additional additives (2 wt% guar gum, 1 wt% psyllium husk) facilitated extrusion-based filament production. Results showed successful large-scale mycelium growth with minimal contamination. Method (1) yielded strong bio-welding but posed drying challenges. Method (2) faced alignment and humidity control issues, while method (3) demonstrated partial success but structural weaknesses. The study highlights grassroots experimentation’s potential in scaling up MBCs while underscoring the need for further research into process refinement and scientific rigor.

  • Open Access

    Design’n’Grow Studio - explorations in upscaled biofabrication

    by Eliza Biala, Kalaivanan Amudhan, Martin Ostermann

    Scaling up mycelium Engineered Living Materials (ELMs) presents opportunities and challenges for architectural design, particularly in understanding scale-related and unrelated properties of constructing with living materials. While Mycelium-Based Composites (MBCs) offer promising physical properties and environmental benefits , their scalability remains underexplored. Previous studies (Le Ferrand, 2024; Elsacker, 2022; Ross, 2016) identified oxygen and carbon dioxide penetration as limiting factors, constraining mycelium growth beyond a depth of 15 cm. Bio-welding techniques have enabled the creation of larger blocks (400 × 550 × 400 mm) (Elsacker, 2022), addressing some of these challenges. This research employs a hands-on experimental approach, constructing large-scale (200 × 80 cm) demonstrators to investigate bio-welding and air penetration constraints. Moving beyond volumetric mass, the study explores speculative fabrication strategies for facade panels, allowing for geometric customization within the biofabrication process. Three methods were tested: (1) sacrificial molding with textile sheets, (2) bio-welding of textile-mycelium filaments, and (3) bio-welding of mycelium blocks. Using a consistent mycelium mixture (80 wt% sawdust, 20 wt% straw, and Ganoderma lucidum), additional additives (2 wt% guar gum, 1 wt% psyllium husk) facilitated extrusion-based filament production. Results showed successful large-scale mycelium growth with minimal contamination. Method (1) yielded strong bio-welding but posed drying challenges. Method (2) faced alignment and humidity control issues, while method (3) demonstrated partial success but structural weaknesses. The study highlights grassroots experimentation’s potential in scaling up MBCs while underscoring the need for further research into process refinement and scientific rigor.