Jaafar Younes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jaafar Younes has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Nesreen Ghaddar
Department of Mechanical Engineering, American University of Beirut, Beirut 1107 2020, Lebanon
15 shared publications Kamel Ghali
8 shared publications- Risto Kosonen
Aalto University
7 shared publications - Minzhou Chen
Aalto University
6 shared publications Arsen Krikor Melikov
4 shared publications- Simo Kilpeläinen
Aalto University
4 shared publications
Latest Publications
- 28 February 2026
- Published by Elsevier in Building and Environment
- Vol. 294
Are all watts equal? Comparing human responses to equivalent heat loss by convection, radiation, and conduction
- 28 February 2026
- Published by Elsevier in Building and Environment
- Vol. 294
Are all watts equal? Comparing human responses to equivalent heat loss by convection, radiation, and conduction
- Open Access
- 20 January 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (2) , 1037
Climate-Resilient Reinforcement Learning Control of Hybrid Ventilation in Mediterranean Offices Under Future Climate Scenarios
This study develops an explainable reinforcement learning (RL) control framework for hybrid ventilation in Mediterranean office buildings to enhance thermal comfort, energy efficiency, and long-term climate resilience. A working environment was created Using EnergyPlus to represent an office test cell equipped with natural ventilation and air conditioning. The RL controller, based on Proximal Policy Optimization (PPO), was trained exclusively on present-day Typical Meteorological Year (TMY) data from Beirut and subsequently evaluated, without retraining, under future 2050 and 2080 climate projections (SSP1-2.6 and SSP5-8.5) generated using the Belcher morphing technique, in order to quantify robustness under projected climate stressors. Results showed that the RL control achieved consistent, though moderate, annual HVAC energy reductions (6–9%), and a reduction in indoor overheating degree (IOD) by about 35.66% compared to rule-based control, while maintaining comfort and increasing natural ventilation hours. The Climate Change Overheating Resistivity (CCOR) improved by 24.32%, demonstrating the controller’s resilience under warming conditions. Explainability was achieved through Kernel SHAP, which revealed physically coherent feature influences consistent with thermal comfort logic. The findings confirmed that physics-informed RL can autonomously learn and sustain effective ventilation control, remaining transparent, reliable, and robust under future climates. This framework establishes a foundation for adaptive and interpretable RL-based hybrid ventilation control, enabling long-lived office buildings in Mediterranean climates to reduce cooling energy demand and mitigate overheating risks under future climate change.
- 20 January 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (2) , 1037
Open AccessClimate-Resilient Reinforcement Learning Control of Hybrid Ventilation in Mediterranean Offices Under Future Climate Scenarios
This study develops an explainable reinforcement learning (RL) control framework for hybrid ventilation in Mediterranean office buildings to enhance thermal comfort, energy efficiency, and long-term climate resilience. A working environment was created Using EnergyPlus to represent an office test cell equipped with natural ventilation and air conditioning. The RL controller, based on Proximal Policy Optimization (PPO), was trained exclusively on present-day Typical Meteorological Year (TMY) data from Beirut and subsequently evaluated, without retraining, under future 2050 and 2080 climate projections (SSP1-2.6 and SSP5-8.5) generated using the Belcher morphing technique, in order to quantify robustness under projected climate stressors. Results showed that the RL control achieved consistent, though moderate, annual HVAC energy reductions (6–9%), and a reduction in indoor overheating degree (IOD) by about 35.66% compared to rule-based control, while maintaining comfort and increasing natural ventilation hours. The Climate Change Overheating Resistivity (CCOR) improved by 24.32%, demonstrating the controller’s resilience under warming conditions. Explainability was achieved through Kernel SHAP, which revealed physically coherent feature influences consistent with thermal comfort logic. The findings confirmed that physics-informed RL can autonomously learn and sustain effective ventilation control, remaining transparent, reliable, and robust under future climates. This framework establishes a foundation for adaptive and interpretable RL-based hybrid ventilation control, enabling long-lived office buildings in Mediterranean climates to reduce cooling energy demand and mitigate overheating risks under future climate change.
- 9 December 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 349
A digital twin solution for optimizing productivity and energy performance in hybrid ventilated office space
- 9 December 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 349
A digital twin solution for optimizing productivity and energy performance in hybrid ventilated office space
- Open Access
- 24 November 2025
- Published by MDPI AG in Proceedings
- Vol. 131 (1) , 32
Reinforcement Learning Control of Hybrid Ventilation for a Climate-Resilient Mediterranean Classroom
Enhancing thermal comfort while reducing cooling demand is a pressing challenge for Mediterranean school buildings, especially as climate change accelerates the frequency and intensity of heat-wave events
- 24 November 2025
- Published by MDPI AG in Proceedings
- Vol. 131 (1) , 32
Open AccessReinforcement Learning Control of Hybrid Ventilation for a Climate-Resilient Mediterranean Classroom
Enhancing thermal comfort while reducing cooling demand is a pressing challenge for Mediterranean school buildings, especially as climate change accelerates the frequency and intensity of heat-wave events
- 22 November 2025
- Published by Elsevier in Building and Environment
- Vol. 289
Frequency and duty cycle effects of intermittent mist-cooled airflows on outdoor comfort compared with steady misting
- 22 November 2025
- Published by Elsevier in Building and Environment
- Vol. 289
Frequency and duty cycle effects of intermittent mist-cooled airflows on outdoor comfort compared with steady misting
- Open Access
Optimal Passive Interventions for Enhancing Resilience of Naturally Ventilated Residential Buildings in Future Climatic Extremes
This study investigates the thermal resilience of naturally ventilated Lebanese residential buildings in the context of future climates, based on four climate zones: coastal (moderate and humid), low mountain (cool and seasonally variable), inland plateau (semi-arid with high summer heat), and high mountain (cold, with significant winter conditions). The aim of the study is to evaluate how passive envelope interventions can enhance indoor thermal resilience under five present and future work scenarios: TMY, SSP1-2.6 (2050 and 2080), and SSP5-8.5 (2050 and 2080). A baseline model was developed for typical building stock in each climate using EnergyPlus-23.2.0. The passive design parameters of window type, shading depth, and building orientation were systematically altered to analyze their effect on thermal comfort and building thermal resilience. Unlike previous studies that assessed either individual passive strategies or a single climate condition, this research combines multi-objective optimizations with overheating resilience metrics, by optimizing passive interventions using the GenOpt-3.1.0 and BESOS (Python-3.7.3 packages to minimize indoor overheating degree (IOD) and maximize climate change overheating resistivity (CCOR) index. Our findings indicate that optimized passive interventions, such as deep shading (0.6–1.0 m), low-e or bronze glazing, and southern orientations, can reduce overheating in all climate zones, reflecting a substantial improvement in thermal resilience. The novelty of this work lies in combining passive envelope optimization with future climate situations and a long-term overheating resilience index (CCOR) in the Mediterranean region. The results provide actionable suggestions for enhancing buildings’ resilience to climate change in Lebanon, thus informing sustainable design practice within the Eastern Mediterranean climate.
Open AccessOptimal Passive Interventions for Enhancing Resilience of Naturally Ventilated Residential Buildings in Future Climatic Extremes
This study investigates the thermal resilience of naturally ventilated Lebanese residential buildings in the context of future climates, based on four climate zones: coastal (moderate and humid), low mountain (cool and seasonally variable), inland plateau (semi-arid with high summer heat), and high mountain (cold, with significant winter conditions). The aim of the study is to evaluate how passive envelope interventions can enhance indoor thermal resilience under five present and future work scenarios: TMY, SSP1-2.6 (2050 and 2080), and SSP5-8.5 (2050 and 2080). A baseline model was developed for typical building stock in each climate using EnergyPlus-23.2.0. The passive design parameters of window type, shading depth, and building orientation were systematically altered to analyze their effect on thermal comfort and building thermal resilience. Unlike previous studies that assessed either individual passive strategies or a single climate condition, this research combines multi-objective optimizations with overheating resilience metrics, by optimizing passive interventions using the GenOpt-3.1.0 and BESOS (Python-3.7.3 packages to minimize indoor overheating degree (IOD) and maximize climate change overheating resistivity (CCOR) index. Our findings indicate that optimized passive interventions, such as deep shading (0.6–1.0 m), low-e or bronze glazing, and southern orientations, can reduce overheating in all climate zones, reflecting a substantial improvement in thermal resilience. The novelty of this work lies in combining passive envelope optimization with future climate situations and a long-term overheating resilience index (CCOR) in the Mediterranean region. The results provide actionable suggestions for enhancing buildings’ resilience to climate change in Lebanon, thus informing sustainable design practice within the Eastern Mediterranean climate.
- Open Access
- 1 November 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3140 (7) , 072008
Beyond skin temperature: Body heat generation and dissipation as predictors for local thermal sensation
Accurately predicting personalized thermal sensation (TS) at a localized level is crucial for the development of human-centric environments and the advancement of personal environmental control systems. Conventional TS models primarily rely on skin temperature, with limited exploration of alternative physiological predictors. This study investigates a novel approach by incorporating the body’s overall heat generation (energy expenditure) and localized heat dissipation (local heat flux) as predictive factors, shifting the focus from thermoregulatory outcomes (skin temperature) to underlying thermophysiological processes. Using controlled human experiments and data-driven modelling, we evaluated TS predictions across 16 body regions. Our findings indicate that models integrating energy expenditure and heat flux perform comparably to skin temperature-based models (mean absolute error range for different body parts: 0.1–0.55 vs. 0.08–0.44). Notably, skin temperature provided better accuracy in extremities (i.e., hands), likely due to vasomotor complexities, movement artifacts, and the limitations of whole-body energy expenditure data rather than segment-specific measurements. Despite these challenges, the proposed predictor has the potential for better performance. To achieve this, future research should focus on integrating segment-specific energy generation with local dissipation to better capture underlying physiological processes and enhance the accuracy of personalized local TS models.
- 1 November 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3140 (7) , 072008
Open AccessBeyond skin temperature: Body heat generation and dissipation as predictors for local thermal sensation
Accurately predicting personalized thermal sensation (TS) at a localized level is crucial for the development of human-centric environments and the advancement of personal environmental control systems. Conventional TS models primarily rely on skin temperature, with limited exploration of alternative physiological predictors. This study investigates a novel approach by incorporating the body’s overall heat generation (energy expenditure) and localized heat dissipation (local heat flux) as predictive factors, shifting the focus from thermoregulatory outcomes (skin temperature) to underlying thermophysiological processes. Using controlled human experiments and data-driven modelling, we evaluated TS predictions across 16 body regions. Our findings indicate that models integrating energy expenditure and heat flux perform comparably to skin temperature-based models (mean absolute error range for different body parts: 0.1–0.55 vs. 0.08–0.44). Notably, skin temperature provided better accuracy in extremities (i.e., hands), likely due to vasomotor complexities, movement artifacts, and the limitations of whole-body energy expenditure data rather than segment-specific measurements. Despite these challenges, the proposed predictor has the potential for better performance. To achieve this, future research should focus on integrating segment-specific energy generation with local dissipation to better capture underlying physiological processes and enhance the accuracy of personalized local TS models.
- Open Access
- 1 November 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3140 (7) , 072008
Beyond skin temperature: Body heat generation and dissipation as predictors for local thermal sensation
Accurately predicting personalized thermal sensation (TS) at a localized level is crucial for the development of human-centric environments and the advancement of personal environmental control systems. Conventional TS models primarily rely on skin temperature, with limited exploration of alternative physiological predictors. This study investigates a novel approach by incorporating the body’s overall heat generation (energy expenditure) and localized heat dissipation (local heat flux) as predictive factors, shifting the focus from thermoregulatory outcomes (skin temperature) to underlying thermophysiological processes. Using controlled human experiments and data-driven modelling, we evaluated TS predictions across 16 body regions. Our findings indicate that models integrating energy expenditure and heat flux perform comparably to skin temperature-based models (mean absolute error range for different body parts: 0.1–0.55 vs. 0.08–0.44). Notably, skin temperature provided better accuracy in extremities (i.e., hands), likely due to vasomotor complexities, movement artifacts, and the limitations of whole-body energy expenditure data rather than segment-specific measurements. Despite these challenges, the proposed predictor has the potential for better performance. To achieve this, future research should focus on integrating segment-specific energy generation with local dissipation to better capture underlying physiological processes and enhance the accuracy of personalized local TS models.
- 1 November 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3140 (7) , 072008
Open AccessBeyond skin temperature: Body heat generation and dissipation as predictors for local thermal sensation
Accurately predicting personalized thermal sensation (TS) at a localized level is crucial for the development of human-centric environments and the advancement of personal environmental control systems. Conventional TS models primarily rely on skin temperature, with limited exploration of alternative physiological predictors. This study investigates a novel approach by incorporating the body’s overall heat generation (energy expenditure) and localized heat dissipation (local heat flux) as predictive factors, shifting the focus from thermoregulatory outcomes (skin temperature) to underlying thermophysiological processes. Using controlled human experiments and data-driven modelling, we evaluated TS predictions across 16 body regions. Our findings indicate that models integrating energy expenditure and heat flux perform comparably to skin temperature-based models (mean absolute error range for different body parts: 0.1–0.55 vs. 0.08–0.44). Notably, skin temperature provided better accuracy in extremities (i.e., hands), likely due to vasomotor complexities, movement artifacts, and the limitations of whole-body energy expenditure data rather than segment-specific measurements. Despite these challenges, the proposed predictor has the potential for better performance. To achieve this, future research should focus on integrating segment-specific energy generation with local dissipation to better capture underlying physiological processes and enhance the accuracy of personalized local TS models.
- Open Access
- 28 October 2025
- Published by Elsevier in Computers in Biology and Medicine
- Vol. 198 (Pt B) , 111218
Advances in human thermophysiology modelling: Methodological review of a century of developments
- 28 October 2025
- Published by Elsevier in Computers in Biology and Medicine
- Vol. 198 (Pt B) , 111218
Open AccessAdvances in human thermophysiology modelling: Methodological review of a century of developments
- 23 September 2025
- Published by Elsevier in Sustainable Cities and Society
- Vol. 132
Effectiveness of outdoor windcatcher and mist cooling in mitigating urban heat and improving pedestrian thermal comfort
- 23 September 2025
- Published by Elsevier in Sustainable Cities and Society
- Vol. 132
Effectiveness of outdoor windcatcher and mist cooling in mitigating urban heat and improving pedestrian thermal comfort