QLQuang-Huy Le

Quang-Huy Le

*This is an algorithmically generated author record based on publicly available information.

Quang-Huy Le has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ảnh hưởng của điều kiện môi trường đến các thông số nhiệt động của hệ thống thu nước ngọt từ không khí

    by Thanh Huy Phan, Quang Huy Le, Minh Nhut Le

    Bài báo trình bày kết quả thực nghiệm thu nước ngọt từ không khí khi sử dụng hệ thống lạnh công suất nhỏ dùng môi chất lạnh R290. Trong nghiên cứu này, một hệ thống lạnh công suất nhỏ sử dụng môt chất lạnh R290 được thiết kế, chế tạo và lắp đặt tại khu vực Thành phố Hồ Chí Minh để đánh giá sử ảnh hưởng của điều kiện môi trường đến các thông số nhiệt động của hệ thống này trong quá trình thu nước ngọt từ không khí. Kết quả thí nghiệm ở điều kiện trời nắng cho thấy rằng, khi nhiệt độ và độ ẩm môi trường giao động trong khoản từ 28 oC đến 37 oC và 38% đến 70%, thì nhiệt độ và áp suất ngưng tụ dao động từ 41 oC đến 49 oC và 13 đến 15,8 bar, trong khi đó nhiệt độ và áp suất bay hơi lần lượt là 3,6 oC đến 6,2 oC và 4,3 đến 4,7 bar. Trong khi đó, lượng nước thu được trong ngày thí nghiệm từ 8h đến 16h là 7,85 lít ứng với điện năng tiêu thụ là 7,55 kW.

  • Open Access

    Experimental Study of the Effect of Ultrasound on the Freezing Process of Bo Chinh Ginseng

    by Minh-Hieu Ngo, Hay Nguyen, The-Bao Nguyen, Thanh-Dat Le, Quang-Huy Le

    The main purpose of this study was to select the appropriate ultrasound parameters that support the freezing process of Bo Chinh ginseng. This process involves placing Bo Chinh ginseng in an open-air environment and ensuring that the transducer does not come into contact with the material. The research results show that the ultrasound power, ultrasound irradiation temperature and intermittency ratio all affect the freezing time, nucleation temperature, color and microstructure of the materials. When the ultrasound continuously operated during the freezing process, at a frequency of 20 kHz, there was a 29.1% reduction in the freezing time at a power level of 100 W as compared to freezing without the help of ultrasound irradiation. The irradiation temperature and nucleation temperature have a linear relationship (y=−0.35x−0.93) which can help to control the nucleation temperature, thereby changing the ice crystal size. Ultrasound-assisted freezing at a 0.6 intermittency ratio had the shortest freezing time. The microstructure of the material changed after ultrasound-assisted freezing and many microchannels and holes were generated. When frozen at a wave rate of 0.4, the microchannels that were created in the material effectively supported the process of water drainage in the drying sublimation stage. At the same time, ultrasound irradiation did not affect the color of the post-freezing material when compared to the color of the frozen material that did not undergo ultrasound irradiation.


  • Open Access

    Experimental Research to Determine the Effect of Ultrasound in Drying Bo Chinh Ginseng by Ultrasound-Assisted Heat Pump Drying Method

    by Hay Nguyen, Quang-Huy Le, Thanh-Dat Le, Van-Kien Pham

    This study focused on the experimental drying of Bo Chinh ginseng by the ultrasound-assisted heat pump drying method, in which the effects of drying air temperature (T), ultrasonic power (P), intermittency ratio of ultrasound generator (A) on the moisture effective diffusion coefficient (Deff), saponin content (Sp) and color change (dE) during the drying process were determined. The results showed that the drying time was reduced from 12.5 h at 35 °C to 8.9 h at 40 °C and greatly reduced to 5.8 h at 55 °C. The moisture diffusion coefficient Deff and color change index increased with the increase in drying temperature. Meanwhile, from 35 °C to 45 °C, the saponin content after drying tended to increase gradually, but when the temperature continued to rise from 45 °C to 55 °C, the saponin content decreased. The effect of ultrasonic power in the drying process was in particular as follows. The drying time of 8.8 h at 40 W ultrasonic power reduced to 7.8 h at 80 W ultrasonic power, and reduced to 7 h at 160 W ultrasonic power. The remaining saponin content after drying tended to increase gradually at the power level of 40–120 W (from 89.2% to 95.2%) and decrease when the power increased from 120 to 160 W (from 95.2% to 90.5%). The moisture diffusion coefficient Deff also increased with the increase in ultrasonic power. Meanwhile, the color change of dried products decreased as the ultrasonic power increased in the range of 40–120 W but increased with the ultrasonic power range from 120 to 160 W. Additionally, the experimental method and Box–Behnken design were used for optimizing the drying process with the optimal drying conditions such as drying air temperature of 45.2 °C, ultrasonic power of 127.7 W and intermittency ratio of ultrasound generator of 0.18.