Emanuele Gallorini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Emanuele Gallorini has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Maurizio Quadrio
Politecnico di Milano
6 shared publications - Alessandro Chiarini
Politecnico di Milano
3 shared publications - Marco Edoardo Rosti
Okinawa Institute of Science and Technology Graduate University (OIST)
2 shared publications - Andrea Benassi
International School for Advanced Studies (SISSA), Trieste, Italy; Chiesi Farmaceutici S.p.A., Parma, Italy
1 shared publication Ciro Cottini
Chiesi Farmaceutici S.p.A. Parma Italy
1 shared publication- Daniele Massaro
Massachusetts Institute of Technology
1 shared publication
Latest Publications
- 28 September 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1043, A45
Drag reduction and subcritical turbulence in controlled pipe flows
Pipe flow controlled by streamwise-travelling waves of azimuthal wall velocity is studied using direct numerical simulations at a bulk Reynolds number italic Re Subscript b Baseline equals 4900 $\textit{Re}_b=4900$ . A comprehensive analysis of drag reduction shows that the flow response differs fundamentally from that of channel flow. Under suitable forcing, pipe flow relaminarises, whereas channel flow does not. Depending on the control parameters, the flow exhibits the spatially localised turbulent state characteristic of transitional pipe flow, with turbulent puffs persisting at bulk Reynolds numbers up to three times higher than in the uncontrolled case. The bulk Reynolds number alone does not determine the onset of localisation. Moreover, drag reduction, which alters the natural relation between bulk and friction velocities, is insufficient to identify a universal onset criterion. An intermittency indicator based on the spatial variance of the cross-sectional turbulent kinetic energy relates the emergence of localised turbulence to the low wall friction produced by the control, although the correspondence is not one-to-one. Despite their qualitative resemblance to canonical turbulent puffs, the controlled puffs exhibit distinct properties; for example, their fronts may propagate faster than the bulk flow. Overall, this work provides a comprehensive characterisation of the subcritical turbulent state and its turbulent puffs in controlled pipe flow, and offers a new perspective on control strategies that aim at flow relaminarisation.- 28 September 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1043, A45
Drag reduction and subcritical turbulence in controlled pipe flows
Pipe flow controlled by streamwise-travelling waves of azimuthal wall velocity is studied using direct numerical simulations at a bulk Reynolds number italic Re Subscript b Baseline equals 4900 $\textit{Re}_b=4900$ . A comprehensive analysis of drag reduction shows that the flow response differs fundamentally from that of channel flow. Under suitable forcing, pipe flow relaminarises, whereas channel flow does not. Depending on the control parameters, the flow exhibits the spatially localised turbulent state characteristic of transitional pipe flow, with turbulent puffs persisting at bulk Reynolds numbers up to three times higher than in the uncontrolled case. The bulk Reynolds number alone does not determine the onset of localisation. Moreover, drag reduction, which alters the natural relation between bulk and friction velocities, is insufficient to identify a universal onset criterion. An intermittency indicator based on the spatial variance of the cross-sectional turbulent kinetic energy relates the emergence of localised turbulence to the low wall friction produced by the control, although the correspondence is not one-to-one. Despite their qualitative resemblance to canonical turbulent puffs, the controlled puffs exhibit distinct properties; for example, their fronts may propagate faster than the bulk flow. Overall, this work provides a comprehensive characterisation of the subcritical turbulent state and its turbulent puffs in controlled pipe flow, and offers a new perspective on control strategies that aim at flow relaminarisation.- Open Access
- 21 August 2026
- Published by Wiley in International Journal for Numerical Methods in Biomedical Engineering
- Vol. 42 (8) , e70208
Direct Numerical Simulations of Inhalation in a 23‐Generation Lung Model
The air flows in the proximal and distal portions of the human lungs are interconnected: the lower Reynolds number in the deeper generations causes a progressive flow regularization, but mass conservation requires flow rate oscillations to propagate through the airway bifurcations. To explain how these competing effects shape the flow state in the deeper generations, we have performed the first high‐fidelity numerical simulation of the air flow in a lung model that includes 23 successive bifurcations of a single planar airway. Turbulence modeling or assumptions on flow regimes are not required. The chosen flow rate is steady on average, and representative of the peak inspiratory flow reached by adult patients breathing through therapeutic inhalers. As expected, advection becomes progressively less important after each bifurcation, until a time‐dependent Stokes regime governed solely by viscous diffusion is established in the smallest generations. However, fluctuations in this regime are relatively fast and large with respect to the mean flow, which is in contrast with the commonly agreed picture that only the breathing frequency is relevant at the scale of the alveoli. We demonstrate that the characteristic frequency and amplitude of these fluctuations are linked to the flow in the upper part of the bronchial tree, as they originate from the time‐dependent flow splitting in the upper bifurcations. Even though these fluctuations are observed here in an idealized, rigid lung model, our findings suggest that the assumptions usually adopted in many of the current lung models might need to be revised.
- 21 August 2026
- Published by Wiley in International Journal for Numerical Methods in Biomedical Engineering
- Vol. 42 (8) , e70208
Open AccessDirect Numerical Simulations of Inhalation in a 23‐Generation Lung Model
The air flows in the proximal and distal portions of the human lungs are interconnected: the lower Reynolds number in the deeper generations causes a progressive flow regularization, but mass conservation requires flow rate oscillations to propagate through the airway bifurcations. To explain how these competing effects shape the flow state in the deeper generations, we have performed the first high‐fidelity numerical simulation of the air flow in a lung model that includes 23 successive bifurcations of a single planar airway. Turbulence modeling or assumptions on flow regimes are not required. The chosen flow rate is steady on average, and representative of the peak inspiratory flow reached by adult patients breathing through therapeutic inhalers. As expected, advection becomes progressively less important after each bifurcation, until a time‐dependent Stokes regime governed solely by viscous diffusion is established in the smallest generations. However, fluctuations in this regime are relatively fast and large with respect to the mean flow, which is in contrast with the commonly agreed picture that only the breathing frequency is relevant at the scale of the alveoli. We demonstrate that the characteristic frequency and amplitude of these fluctuations are linked to the flow in the upper part of the bronchial tree, as they originate from the time‐dependent flow splitting in the upper bifurcations. Even though these fluctuations are observed here in an idealized, rigid lung model, our findings suggest that the assumptions usually adopted in many of the current lung models might need to be revised.
- 6 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1030, A56
Passive scalar cascade in the intermediate layer of turbulent channel flow for $\boldsymbol{Pr}\boldsymbol{\leqslant} \boldsymbol{1}$Similarities and differences between Kolmogorov scale-by-scale equilibria/non-equilibria for velocity and scalar fields are investigated in the intermediate layer of a fully developed turbulent channel flow with a passive scalar/temperature field driven by a uniform heat source. The analysis is based on intermediate asymptotics and direct numerical simulations at different Prandtl numbers lower than unity. Similarly to what happens to the velocity fluctuations, for the fluctuating scalar field Kolmogorov scale-by-scale equilibrium is achieved asymptotically around a length scale $r_{\textit{min}}$ , which is located below the inertial range. The length scale $r_{\textit{min}}$ and the ratio between the inter-scale transfer and dissipation rates at $r_{\textit{min}}$ vary following power laws of the Prandtl number, with exponents determined by matched asymptotics based on the hypothesis of homogeneous two-point physics in non-homogeneous turbulence. The inter-scale transfer rates of turbulent kinetic energy and passive scalar variance are globally similar but show evident differences when their aligned/anti-aligned contributions are considered.- 6 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1030, A56
Passive scalar cascade in the intermediate layer of turbulent channel flow for $\boldsymbol{Pr}\boldsymbol{\leqslant} \boldsymbol{1}$Similarities and differences between Kolmogorov scale-by-scale equilibria/non-equilibria for velocity and scalar fields are investigated in the intermediate layer of a fully developed turbulent channel flow with a passive scalar/temperature field driven by a uniform heat source. The analysis is based on intermediate asymptotics and direct numerical simulations at different Prandtl numbers lower than unity. Similarly to what happens to the velocity fluctuations, for the fluctuating scalar field Kolmogorov scale-by-scale equilibrium is achieved asymptotically around a length scale $r_{\textit{min}}$ , which is located below the inertial range. The length scale $r_{\textit{min}}$ and the ratio between the inter-scale transfer and dissipation rates at $r_{\textit{min}}$ vary following power laws of the Prandtl number, with exponents determined by matched asymptotics based on the hypothesis of homogeneous two-point physics in non-homogeneous turbulence. The inter-scale transfer rates of turbulent kinetic energy and passive scalar variance are globally similar but show evident differences when their aligned/anti-aligned contributions are considered.- 9 January 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1026, A49
Dynamics of the velocity fluctuations in sedimenting suspensions of rigid fibres
We use direct numerical simulations to investigate fluid–solid interactions in suspensions of rigid fibres settling under gravity in a quiescent fluid. The solid-to-fluid density ratio is $\mathcal{O}(100)$ , while the Galileo number ( $ \textit{Ga}$ ) and fibre concentration ( $n\ell_{\kern-1.5pt f}^3$ ) are varied over the ranges $ \textit{Ga} \in [180, 900]$ and $n\ell_{\kern-1.5pt f}^3 \in [0.36, 23.15]$ ; $\ell_{\kern-1.5pt f}$ denotes the fibre length and $n$ the number density. At high $ \textit{Ga}$ and/or low $n\ell_{\kern-1.5pt f}^3$ , fibres cluster into gravity-aligned streamers with elevated concentrations and enhanced settling velocities, disrupting the flow homogeneity. As $ \textit{Ga}$ increases and/or $n\ell_{\kern-1.5pt f}^3$ decreases, the fluid-phase kinetic energy rises and the energy spectrum broadens, reflecting enhanced small-scale activity. The flow anisotropy is assessed by decomposing the energy spectrum into components aligned with and transverse to gravity. Vertical fluctuations are primarily driven by fluid–solid interactions, while transverse ones are maintained by pressure–strain effects that promote isotropy. With increasing $ \textit{Ga}$ , nonlinear interactions become more prominent, producing a net forward energy cascade toward smaller scales, punctuated by localised backscatter events. Analysis of the local velocity gradient tensor reveals distinct flow topologies: at low $ \textit{Ga}$ , the flow is dominated by axisymmetric compression and two-dimensional straining; at high $ \textit{Ga}$ , regions of high fibre concentration are governed by two-dimensional strain, while voids are associated with axisymmetric extension. The fluid motion is predominantly extensional rather than rotational.- 9 January 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1026, A49
Dynamics of the velocity fluctuations in sedimenting suspensions of rigid fibres
We use direct numerical simulations to investigate fluid–solid interactions in suspensions of rigid fibres settling under gravity in a quiescent fluid. The solid-to-fluid density ratio is $\mathcal{O}(100)$ , while the Galileo number ( $ \textit{Ga}$ ) and fibre concentration ( $n\ell_{\kern-1.5pt f}^3$ ) are varied over the ranges $ \textit{Ga} \in [180, 900]$ and $n\ell_{\kern-1.5pt f}^3 \in [0.36, 23.15]$ ; $\ell_{\kern-1.5pt f}$ denotes the fibre length and $n$ the number density. At high $ \textit{Ga}$ and/or low $n\ell_{\kern-1.5pt f}^3$ , fibres cluster into gravity-aligned streamers with elevated concentrations and enhanced settling velocities, disrupting the flow homogeneity. As $ \textit{Ga}$ increases and/or $n\ell_{\kern-1.5pt f}^3$ decreases, the fluid-phase kinetic energy rises and the energy spectrum broadens, reflecting enhanced small-scale activity. The flow anisotropy is assessed by decomposing the energy spectrum into components aligned with and transverse to gravity. Vertical fluctuations are primarily driven by fluid–solid interactions, while transverse ones are maintained by pressure–strain effects that promote isotropy. With increasing $ \textit{Ga}$ , nonlinear interactions become more prominent, producing a net forward energy cascade toward smaller scales, punctuated by localised backscatter events. Analysis of the local velocity gradient tensor reveals distinct flow topologies: at low $ \textit{Ga}$ , the flow is dominated by axisymmetric compression and two-dimensional straining; at high $ \textit{Ga}$ , regions of high fibre concentration are governed by two-dimensional strain, while voids are associated with axisymmetric extension. The fluid motion is predominantly extensional rather than rotational.- Open Access
Dynamics of the velocity fluctuations in sedimenting suspensions of rigid fibres
We use direct numerical simulations to investigate fluid-solid interactions in suspensions of rigid fibres settling under gravity in a quiescent fluid. The solid-to-fluid density ratio is $\mathcal{O}(100)$, while the Galileo number ($Ga$) and fibre concentration ($n\ell_f^3$) are varied over the ranges $Ga \in [180, 900]$ and $n\ell_f^3 \in [0.36, 23.15]$; $\ell_f$ denotes the fibre length and $n$ the number density. At high $Ga$ and/or low $n\ell_f^3$, fibres cluster into gravity-aligned streamers with elevated concentrations and enhanced settling velocities, disrupting the flow homogeneity. As $Ga$ increases and/or $n\ell_f^3$ decreases, the fluid-phase kinetic energy rises and the energy spectrum broadens, reflecting enhanced small-scale activity. The flow anisotropy is assessed by decomposing the energy spectrum into components aligned with and transverse to gravity. Vertical fluctuations are primarily driven by fluid-solid interactions, while transverse ones are maintained by pressure-strain effects that promote isotropy. With increasing $Ga$, nonlinear interactions become more prominent, producing a net forward energy cascade toward smaller scales, punctuated by localised backscatter events. Analysis of the local velocity gradient tensor reveals distinct flow topologies: at low $Ga$, the flow is dominated by axisymmetric compression and two-dimensional straining; at high $Ga$, regions of high fibre concentration are governed by two-dimensional strain, while voids are associated with axisymmetric extension. The fluid motion is predominantly extensional rather than rotational.Open AccessDynamics of the velocity fluctuations in sedimenting suspensions of rigid fibres
We use direct numerical simulations to investigate fluid-solid interactions in suspensions of rigid fibres settling under gravity in a quiescent fluid. The solid-to-fluid density ratio is $\mathcal{O}(100)$, while the Galileo number ($Ga$) and fibre concentration ($n\ell_f^3$) are varied over the ranges $Ga \in [180, 900]$ and $n\ell_f^3 \in [0.36, 23.15]$; $\ell_f$ denotes the fibre length and $n$ the number density. At high $Ga$ and/or low $n\ell_f^3$, fibres cluster into gravity-aligned streamers with elevated concentrations and enhanced settling velocities, disrupting the flow homogeneity. As $Ga$ increases and/or $n\ell_f^3$ decreases, the fluid-phase kinetic energy rises and the energy spectrum broadens, reflecting enhanced small-scale activity. The flow anisotropy is assessed by decomposing the energy spectrum into components aligned with and transverse to gravity. Vertical fluctuations are primarily driven by fluid-solid interactions, while transverse ones are maintained by pressure-strain effects that promote isotropy. With increasing $Ga$, nonlinear interactions become more prominent, producing a net forward energy cascade toward smaller scales, punctuated by localised backscatter events. Analysis of the local velocity gradient tensor reveals distinct flow topologies: at low $Ga$, the flow is dominated by axisymmetric compression and two-dimensional straining; at high $Ga$, regions of high fibre concentration are governed by two-dimensional strain, while voids are associated with axisymmetric extension. The fluid motion is predominantly extensional rather than rotational. - 4 December 2024
- Published by Springer Nature in Meccanica
- Vol. 60 (6) , 1533-1544
Comparison between topological and surface sensitivities for shape optimization
- 4 December 2024
- Published by Springer Nature in Meccanica
- Vol. 60 (6) , 1533-1544
Comparison between topological and surface sensitivities for shape optimization
- 1 March 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 982, A11
Spatial discretization effects in spanwise forcing for turbulent drag reduction
Wall-based spanwise forcing has been experimentally used with success by Auteriet al.(Phys. Fluids, vol. 22, 2010, 115103) to obtain large reductions of turbulent skin-friction drag and considerable energy savings in a pipe flow. The spatial distribution of the azimuthal wall velocity used in the experiment was not continuous, but piecewise constant. The present study is a numerical replica of the experiment, based on a set of direct numerical simulations (DNS); its goal is the identification of the effects of spatially discrete forcing, as opposed to the idealized sinusoidal forcing considered in the majority of numerical studies. Regardless of the discretization, with DNS the maximum drag reduction is found to be larger: the flow easily reaches complete relaminarization, whereas the experiment was capped at 33 % drag reduction. However, the key result stems from the observation that, for the piecewise-constant forcing, the apparent irregularities of the experimental data appear in the simulation data too. They derive from the rich harmonic content of the discontinuous travelling wave, which alters the drag reduction of the sinusoidal forcing. A detailed understanding of the contribution of each harmonic reveals that, whenever for example technological limitations constrain one to work far from the optimal forcing parameters, a discrete forcing may perform very differently from the corresponding ideal sinusoid, and in principle can outperform it. However, care should be exercised in comparison, as discrete and continuous forcing have different energy requirements.
- 1 March 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 982, A11
Spatial discretization effects in spanwise forcing for turbulent drag reduction
Wall-based spanwise forcing has been experimentally used with success by Auteriet al.(Phys. Fluids, vol. 22, 2010, 115103) to obtain large reductions of turbulent skin-friction drag and considerable energy savings in a pipe flow. The spatial distribution of the azimuthal wall velocity used in the experiment was not continuous, but piecewise constant. The present study is a numerical replica of the experiment, based on a set of direct numerical simulations (DNS); its goal is the identification of the effects of spatially discrete forcing, as opposed to the idealized sinusoidal forcing considered in the majority of numerical studies. Regardless of the discretization, with DNS the maximum drag reduction is found to be larger: the flow easily reaches complete relaminarization, whereas the experiment was capped at 33 % drag reduction. However, the key result stems from the observation that, for the piecewise-constant forcing, the apparent irregularities of the experimental data appear in the simulation data too. They derive from the rich harmonic content of the discontinuous travelling wave, which alters the drag reduction of the sinusoidal forcing. A detailed understanding of the contribution of each harmonic reveals that, whenever for example technological limitations constrain one to work far from the optimal forcing parameters, a discrete forcing may perform very differently from the corresponding ideal sinusoid, and in principle can outperform it. However, care should be exercised in comparison, as discrete and continuous forcing have different energy requirements.
- Open Access
- 23 August 2023
- Published by Elsevier in Computers & Fluids
- Vol. 266
A multi region adjoint-based solver for topology optimization in conjugate heat transfer problems
- 23 August 2023
- Published by Elsevier in Computers & Fluids
- Vol. 266
Open AccessA multi region adjoint-based solver for topology optimization in conjugate heat transfer problems
- 30 March 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 960, A7
Structure function tensor equations with triple decomposition
Exact budget equations are derived for the coherent and stochastic contributions to the second-order structure function tensor. They extend the anisotropic generalised Kolmogorov equations (AGKE) by considering the coherent and stochastic parts of the Reynolds stress tensor, and are useful for the statistical description of turbulent flows with periodic or quasi-periodic features, like, for example, the alternate shedding after a bluff body. While the original AGKE describe production, transport, inter-component redistribution and dissipation of the Reynolds stresses in the combined space of scales and positions, the new equations, called AGKE.
- 30 March 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 960, A7
Structure function tensor equations with triple decomposition
Exact budget equations are derived for the coherent and stochastic contributions to the second-order structure function tensor. They extend the anisotropic generalised Kolmogorov equations (AGKE) by considering the coherent and stochastic parts of the Reynolds stress tensor, and are useful for the statistical description of turbulent flows with periodic or quasi-periodic features, like, for example, the alternate shedding after a bluff body. While the original AGKE describe production, transport, inter-component redistribution and dissipation of the Reynolds stresses in the combined space of scales and positions, the new equations, called AGKE.
- Open Access
- 27 February 2023
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 95 (7) , 1090-1116
An adjoint‐based solver with adaptive mesh refinement for efficient design of coupled thermal‐fluid systems
A multi‐objective continuous adjoint strategy based on the superposition of boundary functions for topology optimization of problems where the heat transfer must be enhanced and the dissipated mechanical power controlled at the same time, has been here implemented in a finite volume (FV), incompressible, steady flow solver supporting a dynamic adaptive mesh refinement (AMR) strategy. The solver models the transition from fluid to solid by a porosity field, that appears in the form of penalization in the momentum equation; the material distribution is optimized by the method of moving asymptotes (MMA). AMR is based on a hierarchical nonconforming h‐refinement strategy and is applied together with a flux correction to enforce conservation across topology changes. It is shown that a proper choice of the refinement criterium favors a mesh‐independent solution. Finally, a Pareto front built from the components of the objective function is used to find the best combination of the weights in the optimization cycle. Numerical experiments on two‐ and three‐dimensional test cases, including the aero‐thermal optimization of a simplified layout of a cooling system, have been used to validate the implemented methodology.
- 27 February 2023
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 95 (7) , 1090-1116
Open AccessAn adjoint‐based solver with adaptive mesh refinement for efficient design of coupled thermal‐fluid systems
A multi‐objective continuous adjoint strategy based on the superposition of boundary functions for topology optimization of problems where the heat transfer must be enhanced and the dissipated mechanical power controlled at the same time, has been here implemented in a finite volume (FV), incompressible, steady flow solver supporting a dynamic adaptive mesh refinement (AMR) strategy. The solver models the transition from fluid to solid by a porosity field, that appears in the form of penalization in the momentum equation; the material distribution is optimized by the method of moving asymptotes (MMA). AMR is based on a hierarchical nonconforming h‐refinement strategy and is applied together with a flux correction to enforce conservation across topology changes. It is shown that a proper choice of the refinement criterium favors a mesh‐independent solution. Finally, a Pareto front built from the components of the objective function is used to find the best combination of the weights in the optimization cycle. Numerical experiments on two‐ and three‐dimensional test cases, including the aero‐thermal optimization of a simplified layout of a cooling system, have been used to validate the implemented methodology.