Oscar Dam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Oscar Dam has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Alberto Echegarai
Universidad Nacional Experimental Politécnica "Antonio José de Sucre
2 shared publications - Alex J. Velez-Cruz
Polytechnic University of Puerto Rico. San Juan, PR-USA
1 shared publication Ernesto Echegarai
Universidad Nacional Experimental Politécnica Antonio José de Sucre. Puerto Ordaz- Venezuela
1 shared publication- Ferdinand Eddington Ceballos Bejarano
Universidad Nacional de San Agustín de Arequipa
1 shared publication - Hilda Lizbeth Pinto Pomareda
Universidad Nacional de San Agustin de Arequipa. Arequipa, Perú
1 shared publication - Jimmy Angel Diaz Flores
Universidad Nacional de San Agustín de Arequipa
1 shared publication
Latest Publications
- Open Access
- 29 September 2025
- Published by AutanaBooks S.A.S in Athenea
- Vol. 6 (21) , 56-66
Focus on the Thermoadhesion Mechanism in the Formation of Fayalite-Type Ceramic Deposits in Particle Separators of Fluidized-Bed Reactors
This article analyzes the thermoadhesive mechanism that leads to the formation of fayalite buildup in particle separators within fluidized bed reactors. The research focuses on how factors such as temperature, pressure, and the energy released during collisions between particles influence the viscosity change and the plasticity of the system, particularly in the temperature range of 450°C to 750°C and pressures above 5 bars. It is proposed that these buildup forms when the impact energy heats the particles, decreasing their relative viscosity and favoring their plastic viscosity, which facilitates their adherence and buildup on the internal surfaces of the equipment. The use of mathematical models, based on a modification of McClean's creep theory, allows for the estimation of the conditions that generate this buildup, as well as their potential application in the design and control of similar ceramic processes.
- 29 September 2025
- Published by AutanaBooks S.A.S in Athenea
- Vol. 6 (21) , 56-66
Open AccessFocus on the Thermoadhesion Mechanism in the Formation of Fayalite-Type Ceramic Deposits in Particle Separators of Fluidized-Bed Reactors
This article analyzes the thermoadhesive mechanism that leads to the formation of fayalite buildup in particle separators within fluidized bed reactors. The research focuses on how factors such as temperature, pressure, and the energy released during collisions between particles influence the viscosity change and the plasticity of the system, particularly in the temperature range of 450°C to 750°C and pressures above 5 bars. It is proposed that these buildup forms when the impact energy heats the particles, decreasing their relative viscosity and favoring their plastic viscosity, which facilitates their adherence and buildup on the internal surfaces of the equipment. The use of mathematical models, based on a modification of McClean's creep theory, allows for the estimation of the conditions that generate this buildup, as well as their potential application in the design and control of similar ceramic processes.
- Open Access
- 8 September 2025
- Published by AutanaBooks S.A.S in Athenea
- Vol. 6 (21) , 18-37
Educación superior y transformación digital en la sociedad: aplicaciones de la inteligencia artificial y la simulación computacional en la formación universitaria
La presente investigación aborda el impacto de la inteligencia artificial (IA) y la simulación computacional en la formación universitaria, en el contexto de la transformación digital en la educación superior. Se aplicó un enfoque cuantitativo con diseño no experimental y alcance correlacional-descriptivo, mediante un cuestionario validado aplicado a 180 estudiantes de distintas áreas del conocimiento. Los resultados muestran una alta aceptación y uso académico de herramientas de IA, especialmente en estudiantes de ingeniería y últimos semestres. Además, se identificó una correlación positiva entre el uso de IA y el rendimiento académico, así como diferencias significativas según género y nivel de carrera. Se concluye que la IA se posiciona como un recurso clave en el desarrollo de competencias digitales, potenciando la comprensión, la autonomía y la productividad académica. Este estudio aporta evidencia empírica para fortalecer estrategias de integración de tecnologías emergentes en contextos educativos univ
- 8 September 2025
- Published by AutanaBooks S.A.S in Athenea
- Vol. 6 (21) , 18-37
Open AccessEducación superior y transformación digital en la sociedad: aplicaciones de la inteligencia artificial y la simulación computacional en la formación universitaria
La presente investigación aborda el impacto de la inteligencia artificial (IA) y la simulación computacional en la formación universitaria, en el contexto de la transformación digital en la educación superior. Se aplicó un enfoque cuantitativo con diseño no experimental y alcance correlacional-descriptivo, mediante un cuestionario validado aplicado a 180 estudiantes de distintas áreas del conocimiento. Los resultados muestran una alta aceptación y uso académico de herramientas de IA, especialmente en estudiantes de ingeniería y últimos semestres. Además, se identificó una correlación positiva entre el uso de IA y el rendimiento académico, así como diferencias significativas según género y nivel de carrera. Se concluye que la IA se posiciona como un recurso clave en el desarrollo de competencias digitales, potenciando la comprensión, la autonomía y la productividad académica. Este estudio aporta evidencia empírica para fortalecer estrategias de integración de tecnologías emergentes en contextos educativos univ
- 27 March 2025
- Published by AutanaBooks S.A.S in Athenea
- p. 20-31
A study of the mechanical and electrical properties of the cortical bone based on age, biochemical factors and Nernst equation
This study presents the development of a mathematical model to assess the performance of oil strings during the drilling process of a reservoir, considering the dynamic conditions and operational characteristics of the equipment during its functions, and taking into account the mechanical properties of API K55 steel. The research resulted in a set of equations that model the behavior of stresses and deformations experienced by the oil tools when transmitting torque, facilitating the opening ofthe reservoir. A finite element analysis was conducted to evaluate the structural behavior of the strings and to estimate the time required to reach permanent deformations, as well as the time before failure occurs.
- 27 March 2025
- Published by AutanaBooks S.A.S in Athenea
- p. 20-31
A study of the mechanical and electrical properties of the cortical bone based on age, biochemical factors and Nernst equation
This study presents the development of a mathematical model to assess the performance of oil strings during the drilling process of a reservoir, considering the dynamic conditions and operational characteristics of the equipment during its functions, and taking into account the mechanical properties of API K55 steel. The research resulted in a set of equations that model the behavior of stresses and deformations experienced by the oil tools when transmitting torque, facilitating the opening ofthe reservoir. A finite element analysis was conducted to evaluate the structural behavior of the strings and to estimate the time required to reach permanent deformations, as well as the time before failure occurs.
- Open Access
- 16 December 2023
- Published by AutanaBooks S.A.S in Athenea
- Vol. 4 (14) , 22-31
Thermoviscosity mechanism approach in forming fayalitetype ceramic accumulations in particle separators in CFD reactors
This article presents the fundamental bases to generate knowledge in forming fayalite-type adhesions. Likewise, to determine the conditions that favor the change of viscosity and consequent conditions of the plasticity of the studied system. The analysis focuses on temperatures between 723K and 1023K and pressures above 5 bar. As a result, the formation of adhesions observed in the production process that contain the materials involved and commonly associated with the collision between the particles are estimated, as well as the effect of the different associated energies that arise from this phenomenon. This mechanism may apply to the study of the adhesions of other ceramic materials under thermoplastic conditions with behavior in similar conditions to the studied ceramic system, using the equation modified to that proposed by Mc Lean for thermoelasticity of metals.
- 16 December 2023
- Published by AutanaBooks S.A.S in Athenea
- Vol. 4 (14) , 22-31
Open AccessThermoviscosity mechanism approach in forming fayalitetype ceramic accumulations in particle separators in CFD reactors
This article presents the fundamental bases to generate knowledge in forming fayalite-type adhesions. Likewise, to determine the conditions that favor the change of viscosity and consequent conditions of the plasticity of the studied system. The analysis focuses on temperatures between 723K and 1023K and pressures above 5 bar. As a result, the formation of adhesions observed in the production process that contain the materials involved and commonly associated with the collision between the particles are estimated, as well as the effect of the different associated energies that arise from this phenomenon. This mechanism may apply to the study of the adhesions of other ceramic materials under thermoplastic conditions with behavior in similar conditions to the studied ceramic system, using the equation modified to that proposed by Mc Lean for thermoelasticity of metals.
- Open Access
- 1 September 2022
- Published by AutanaBooks S.A.S in Athenea
- Vol. 3 (9) , 7-14
Mechanism of iron oxide swelling in metallization processes
The results of stresses caused by desorption of dissolved nitrogen atoms in point defects of allotropic phases of metallic iron obtained by solid-state reduction processes are shown. In the ferrite and austenite phases, the amounts of dissolved nitrogen and vacuums were calculated and the expansion of the surface mechanism of nitrogen adsorption was proposed, with the absorption-desorption to determine the number of its atoms and molecules adjusted to the space of the vacuums located inside the phases and to obtain the pressures and efforts generated by the confined gas. The calculated values of the efforts for thedesorption of three molecules of nitrogen in a vacuum of the ferrite and austenite crystalline network were 621.2 and 727.6 Kgf/mm2, and when compared with the known values of their tensile strength (breakage) of 28 and 105 Kgf/mm2, they were 22 and 7 times higher respectively, favoring their swelling and catastrophic cracking. Se muestran los resultados de esfuerzos causados por la desorción de átomos de nitrógeno disueltos en defectos puntuales de las fases alotrópicas del hierro metálico obtenido mediante procesos de reducción en estado sólido. En las fases ferrita y austenita se calcularon las cantidades de nitrógeno disuelto yvacancias y se propuso la expansión del mecanismo superficial de adsorción del nitrógeno, con la absorción-desorción para determinar la cantidad de sus átomos y moléculas ajustadas al espacio de las vacancias ubicadas en el interior de las fases y obtener las presiones y esfuerzos generados por el gas confinado. Los valores calculados de los esfuerzos por la desorción de tres moléculas del nitrógeno en una vacancia de la red cristalina de la ferrita y austenita fueron 621,2 y 727,6 Kgf/mm2, y al compararse con los valores conocidos de sus resistencias a la tracción (rotura) de 28 y 105 Kgf/mm2, resultaron en 22 y 7 veces superiores respectivamente, favoreciendo su hinchamiento y agrietamiento catastrófico.
- 1 September 2022
- Published by AutanaBooks S.A.S in Athenea
- Vol. 3 (9) , 7-14
Open AccessMechanism of iron oxide swelling in metallization processes
The results of stresses caused by desorption of dissolved nitrogen atoms in point defects of allotropic phases of metallic iron obtained by solid-state reduction processes are shown. In the ferrite and austenite phases, the amounts of dissolved nitrogen and vacuums were calculated and the expansion of the surface mechanism of nitrogen adsorption was proposed, with the absorption-desorption to determine the number of its atoms and molecules adjusted to the space of the vacuums located inside the phases and to obtain the pressures and efforts generated by the confined gas. The calculated values of the efforts for thedesorption of three molecules of nitrogen in a vacuum of the ferrite and austenite crystalline network were 621.2 and 727.6 Kgf/mm2, and when compared with the known values of their tensile strength (breakage) of 28 and 105 Kgf/mm2, they were 22 and 7 times higher respectively, favoring their swelling and catastrophic cracking. Se muestran los resultados de esfuerzos causados por la desorción de átomos de nitrógeno disueltos en defectos puntuales de las fases alotrópicas del hierro metálico obtenido mediante procesos de reducción en estado sólido. En las fases ferrita y austenita se calcularon las cantidades de nitrógeno disuelto yvacancias y se propuso la expansión del mecanismo superficial de adsorción del nitrógeno, con la absorción-desorción para determinar la cantidad de sus átomos y moléculas ajustadas al espacio de las vacancias ubicadas en el interior de las fases y obtener las presiones y esfuerzos generados por el gas confinado. Los valores calculados de los esfuerzos por la desorción de tres moléculas del nitrógeno en una vacancia de la red cristalina de la ferrita y austenita fueron 621,2 y 727,6 Kgf/mm2, y al compararse con los valores conocidos de sus resistencias a la tracción (rotura) de 28 y 105 Kgf/mm2, resultaron en 22 y 7 veces superiores respectivamente, favoreciendo su hinchamiento y agrietamiento catastrófico.