Ahmad Khaled
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ahmad Khaled has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Alireza Alian
IMEC
2 shared publications - Bertrand Parvais
IMEC
2 shared publications - Uthayasankaran Peralagu
IMEC
2 shared publications Adam Cooman
IMEC, Leuven, Belgium
1 shared publication- Daanish Smellie
IMEC
1 shared publication Dimitri Lederer
Université catholique de Louvain
1 shared publication
Latest Publications
- 1 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (2) , 779-788
Analysis of the Gate Current’s Influence on the RF Power Performance of InAlN/GaN HEMTs
Gate current is known to limit device performance, yet a detailed analysis of its impact on RF power performance has not been extensively documented. This article examines the influence of gate current on RF power performance. A small-signal equivalent-circuit analysis shows that gate current degrades the device’s RF power performance, with higher gate currents causing greater degradation. In addition, the effect of gate current varies with frequency due to the frequency-dependent impedance of $C_{\text{gs}}$ and $C_{\text{gd}}$ , resulting in more significant degradation at lower frequencies because of the parallel connection of gate conduction with these capacitors. These findings are validated under large-signal conditions using an experimentally verified device model for InAlN/GaN high-electron-mobility transistors (HEMTs).
- 1 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (2) , 779-788
Analysis of the Gate Current’s Influence on the RF Power Performance of InAlN/GaN HEMTs
Gate current is known to limit device performance, yet a detailed analysis of its impact on RF power performance has not been extensively documented. This article examines the influence of gate current on RF power performance. A small-signal equivalent-circuit analysis shows that gate current degrades the device’s RF power performance, with higher gate currents causing greater degradation. In addition, the effect of gate current varies with frequency due to the frequency-dependent impedance of $C_{\text{gs}}$ and $C_{\text{gd}}$ , resulting in more significant degradation at lower frequencies because of the parallel connection of gate conduction with these capacitors. These findings are validated under large-signal conditions using an experimentally verified device model for InAlN/GaN high-electron-mobility transistors (HEMTs).
- 9 October 2022
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2022-02 (32) , 1208
(Digital Presentation) Substrate Effects in GaN-on-Si Hemt Technology for RF FEM Applications
: GaN-on-Si HEMTs are emerging as a viable candidate for front-end-of-module (FEM) implementation in 5G and beyond user equipment and small-cell applications [1][2]. This is because GaN HEMTs based power amplifiers and switches have high power handling capability as well as excellent switch figure-of-merit (Ron × Coff). The cost-effective integration of GaN HEMTs on silicon substrates not only benefit from standard CMOS back-end-of-the-line processing but also wafer-level integration with Si-CMOS [1][3], enabling complex functionality and better performance than the standalone counterparts. An example can be a hybrid beamformer where GaN HEMTs can enable much smaller antenna array and therefore a smaller system form factor. For 5G wireless applications, standalone or co-integrated GaN HEMT based FEMs can lead to a more energy efficient and compact system as compared to standalone Si-CMOS technologies. However, for both amplifiers and switches, GaN-on-Si HEMTs present thermal management and substrate loss related issues. In this work, we study and model the impact of GaN HEMT integration on Si substrate on RF substrate losses and non-linearities. The growth of III-N buffer is the most significant factor in determining RF losses and harmonic distortion contribution from the substrate. High temperature annealing and ion implantation steps encountered during HEMT processing can also degrade the substrate performance. In addition, we demonstrate a direct co-relation between substrate losses and harmonic distortion analogous to silicon-on-insulator technologies (Figure 1). However, the bias dependence of RF losses and harmonics show a strong time dependence (memory effects) which is more complex to model [11]. We discuss the approaches to understand and model these effects. References: [1] H. W. Then et al, IEEE IEDM Tech. Dig., 2021, pp. 230-234. [2] B. Parvais et al, IEEE IEDM Tech. Dig., 2020, pp. 155-158. [3] W. E. Hoke et al, J. Vac. Sci. Technol. B 30, 02B101 (2012). [4] Drillet F et al, IJMWT 13, 517–522, 2021. [5] L. Cao et al, CSMANTECH conference Tech. Dig., 2020. [6] Roda Neve et al, IEEE TED, Vol. 59, NO. 4, pp. 924-932, 2012. [7] S. Yadav et al., in IEEE IEDM Tech. Dig., 2020, pp. 159-162. [8] Rack et al, ECS Trans., 92 (4), pp. 79-94, 2019. [9] Zhu et al, IEEE Microw. Wireless Compon. Lett., vol. 28, no. 8, pp. 377–379, 2018. [10] Raskin et al, IEEE SiRFIC, 2015. [11] P. Cardinael et al, IEEE ESSDERC 2021, pp. 303-306. Figure 1
- 9 October 2022
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2022-02 (32) , 1208
(Digital Presentation) Substrate Effects in GaN-on-Si Hemt Technology for RF FEM Applications
: GaN-on-Si HEMTs are emerging as a viable candidate for front-end-of-module (FEM) implementation in 5G and beyond user equipment and small-cell applications [1][2]. This is because GaN HEMTs based power amplifiers and switches have high power handling capability as well as excellent switch figure-of-merit (Ron × Coff). The cost-effective integration of GaN HEMTs on silicon substrates not only benefit from standard CMOS back-end-of-the-line processing but also wafer-level integration with Si-CMOS [1][3], enabling complex functionality and better performance than the standalone counterparts. An example can be a hybrid beamformer where GaN HEMTs can enable much smaller antenna array and therefore a smaller system form factor. For 5G wireless applications, standalone or co-integrated GaN HEMT based FEMs can lead to a more energy efficient and compact system as compared to standalone Si-CMOS technologies. However, for both amplifiers and switches, GaN-on-Si HEMTs present thermal management and substrate loss related issues. In this work, we study and model the impact of GaN HEMT integration on Si substrate on RF substrate losses and non-linearities. The growth of III-N buffer is the most significant factor in determining RF losses and harmonic distortion contribution from the substrate. High temperature annealing and ion implantation steps encountered during HEMT processing can also degrade the substrate performance. In addition, we demonstrate a direct co-relation between substrate losses and harmonic distortion analogous to silicon-on-insulator technologies (Figure 1). However, the bias dependence of RF losses and harmonics show a strong time dependence (memory effects) which is more complex to model [11]. We discuss the approaches to understand and model these effects. References: [1] H. W. Then et al, IEEE IEDM Tech. Dig., 2021, pp. 230-234. [2] B. Parvais et al, IEEE IEDM Tech. Dig., 2020, pp. 155-158. [3] W. E. Hoke et al, J. Vac. Sci. Technol. B 30, 02B101 (2012). [4] Drillet F et al, IJMWT 13, 517–522, 2021. [5] L. Cao et al, CSMANTECH conference Tech. Dig., 2020. [6] Roda Neve et al, IEEE TED, Vol. 59, NO. 4, pp. 924-932, 2012. [7] S. Yadav et al., in IEEE IEDM Tech. Dig., 2020, pp. 159-162. [8] Rack et al, ECS Trans., 92 (4), pp. 79-94, 2019. [9] Zhu et al, IEEE Microw. Wireless Compon. Lett., vol. 28, no. 8, pp. 377–379, 2018. [10] Raskin et al, IEEE SiRFIC, 2015. [11] P. Cardinael et al, IEEE ESSDERC 2021, pp. 303-306. Figure 1