Yaw A. Mensah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yaw A. Mensah has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- John D. Cressler
Georgia Institute of Technology
17 shared publications - Jeffrey W. Teng
The Aerospace Corporation, El Segundo, CA, USA
10 shared publications - Brett L. Ringel
Georgia Institute of Technology
7 shared publications - Zachary R. Brumbach
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
6 shared publications - Adrian Ildefonso
U.S. Naval Research Laboratory, Washington, DC, USA
5 shared publications - Ani Khachatrian
U.S. Naval Research Laboratory, Washington, DC, USA
4 shared publications
Latest Publications
- 4 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (7) , 1176-1179
A 200-GHz High-Compression, Coupled-Line Common-Base Mixer in 90-nm SiGe Technology
This letter presents a novel fundamental downconverting mixer topology for millimeter-wave (mm-Wave) applications operating beyond $f_{max}/2$ . The proposed work achieves high-compression via the use of a cascaded common-base (CCB) gain stage and a novel coupled-line coupler (CLC)-based switching stage, with triaxial balun-based matching networks at the RF and local oscillator (LO) ports. This architecture is implemented in a 90-nm silicon-germanium (SiGe) BiCMOS process technology with an $f_{T}/f_{max}$ of 340/410GHz and achieves a state-of-the-art $IP_{1{\,}\text {dB}}$ of −3dBm and 4.4dB conversion gain across an operating frequency range of 188–226GHz, while only consuming 111 mW of DC power under saturated LO drive.
- 4 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (7) , 1176-1179
A 200-GHz High-Compression, Coupled-Line Common-Base Mixer in 90-nm SiGe Technology
This letter presents a novel fundamental downconverting mixer topology for millimeter-wave (mm-Wave) applications operating beyond $f_{max}/2$ . The proposed work achieves high-compression via the use of a cascaded common-base (CCB) gain stage and a novel coupled-line coupler (CLC)-based switching stage, with triaxial balun-based matching networks at the RF and local oscillator (LO) ports. This architecture is implemented in a 90-nm silicon-germanium (SiGe) BiCMOS process technology with an $f_{T}/f_{max}$ of 340/410GHz and achieves a state-of-the-art $IP_{1{\,}\text {dB}}$ of −3dBm and 4.4dB conversion gain across an operating frequency range of 188–226GHz, while only consuming 111 mW of DC power under saturated LO drive.
- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (1) , 138-146
Impact of Total-Ionizing Dose on Injection-Locked Voltage-Controlled Oscillators
Voltage-controlled oscillators (VCOs) are key components in providing periodic signals that are used in RF communications systems for time synchronization and signal processing. However, standalone VCOs can have poor phase noise performance and experience frequency drift; therefore, injection locking can be implemented in a VCO to stabilize these performance metrics. Injection-locked VCOs (ILVCOs) in satellite communications or radar systems can be subject to total-ionizing dose (TID) effects, which could alter the performance of the oscillator. The present work analyzes the effects of TID in a 5 GHz ILVCO using an X-ray source, and demonstrates that the locking range increases and phase noise of the ILVCO improves with total dose. This unexpected result was analyzed using circuit simulations and shows that the negative threshold voltage shifts induced by TID may be posited to the increase of the ratio of injection signal current to oscillator signal current, which may ultimately extend the locking range. Consequently, the increase in the strength of the injection signal due to TID may also lead to the decrease of phase noise. These results suggest that the use of ILVCOs in satellite systems may be favorable as they are TID radiation tolerant compared to standalone oscillators.
- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (1) , 138-146
Impact of Total-Ionizing Dose on Injection-Locked Voltage-Controlled Oscillators
Voltage-controlled oscillators (VCOs) are key components in providing periodic signals that are used in RF communications systems for time synchronization and signal processing. However, standalone VCOs can have poor phase noise performance and experience frequency drift; therefore, injection locking can be implemented in a VCO to stabilize these performance metrics. Injection-locked VCOs (ILVCOs) in satellite communications or radar systems can be subject to total-ionizing dose (TID) effects, which could alter the performance of the oscillator. The present work analyzes the effects of TID in a 5 GHz ILVCO using an X-ray source, and demonstrates that the locking range increases and phase noise of the ILVCO improves with total dose. This unexpected result was analyzed using circuit simulations and shows that the negative threshold voltage shifts induced by TID may be posited to the increase of the ratio of injection signal current to oscillator signal current, which may ultimately extend the locking range. Consequently, the increase in the strength of the injection signal due to TID may also lead to the decrease of phase noise. These results suggest that the use of ILVCOs in satellite systems may be favorable as they are TID radiation tolerant compared to standalone oscillators.
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
System-Level Characterization of Single-Event Effects in Integrated Electronic-Photonic Optical Links for Space-based Communications
This work investigates single-event effects (SEEs) in integrated optical transceivers by experimentally examining subsystem-level vulnerabilities and their contributions to system-level upsets using pulsed-laser testing. A silicon-on-insulator (SOI) electronic photonic integrated circuit (ePIC) implementing an on–off keying (OOK), intensity-modulated direct-detection (IMDD) link is used as a test platform. Individual subsystems are selectively targeted to study single-event transient (SET) generation and propagation across electrical and optical domains. An analytical model is developed to describe electrical-to-optical SET propagation and identify subsystem-specific parameters influencing transient behavior. Experimental results show that, within this platform, SET duration is a key factor in SEU severity, as long transients lead to extended multi-bit upsets. The results of this work highlight the importance of subsystem-level transient characterization to guide targeted radiation-hardened by- design (RHBD) strategies for robust optical communications in space environments.
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
System-Level Characterization of Single-Event Effects in Integrated Electronic-Photonic Optical Links for Space-based Communications
This work investigates single-event effects (SEEs) in integrated optical transceivers by experimentally examining subsystem-level vulnerabilities and their contributions to system-level upsets using pulsed-laser testing. A silicon-on-insulator (SOI) electronic photonic integrated circuit (ePIC) implementing an on–off keying (OOK), intensity-modulated direct-detection (IMDD) link is used as a test platform. Individual subsystems are selectively targeted to study single-event transient (SET) generation and propagation across electrical and optical domains. An analytical model is developed to describe electrical-to-optical SET propagation and identify subsystem-specific parameters influencing transient behavior. Experimental results show that, within this platform, SET duration is a key factor in SEU severity, as long transients lead to extended multi-bit upsets. The results of this work highlight the importance of subsystem-level transient characterization to guide targeted radiation-hardened by- design (RHBD) strategies for robust optical communications in space environments.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (2) , 301-304
A 163–214-GHz SiGe Cascode Bootstrapped Gilbert Cell Push–Push Hybrid Frequency Quadrupler
This letter presents a silicon–germanium (SiGe) frequency quadrupler with high conversion gain and broad bandwidth leveraging a gain-enhanced cascode bootstrapped Gilbert cell (BSGC) cascaded with a push–push (PP) doubler topology. This novel hybrid architecture provides an excellent tradeoff in conversion gain, output power, and bandwidth at mm-Wave. The quadrupler was demonstrated in a 90-nm SiGe BiCMOS process technology and achieves 10.2 dB of conversion gain and 2 dBm of output power across a 27% 3-dB bandwidth of 163–214 GHz. This design achieves a state-of-the-art conversion gain–bandwidth (CGBW) product of 161.3 GHz, the highest reported to date among silicon-based frequency quadruplers operating around 200 GHz.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (2) , 301-304
A 163–214-GHz SiGe Cascode Bootstrapped Gilbert Cell Push–Push Hybrid Frequency Quadrupler
This letter presents a silicon–germanium (SiGe) frequency quadrupler with high conversion gain and broad bandwidth leveraging a gain-enhanced cascode bootstrapped Gilbert cell (BSGC) cascaded with a push–push (PP) doubler topology. This novel hybrid architecture provides an excellent tradeoff in conversion gain, output power, and bandwidth at mm-Wave. The quadrupler was demonstrated in a 90-nm SiGe BiCMOS process technology and achieves 10.2 dB of conversion gain and 2 dBm of output power across a 27% 3-dB bandwidth of 163–214 GHz. This design achieves a state-of-the-art conversion gain–bandwidth (CGBW) product of 161.3 GHz, the highest reported to date among silicon-based frequency quadruplers operating around 200 GHz.
- 1 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (1) , 485-498
Advancing Self-Sustainable Ultralong-Range Microlocalization: A Fully Passive Multibeam Harmonic mmID With Extended Angular Coverage for Next-Generation IoT Infrastructures
The rapid expansion of next-generation Internet-of-Things (IoT) infrastructures demands scalable, battery-free sensing systems capable of accurate long-range detection, motivating the shift from battery-powered devices to fully passive architectures. This work presents a lens-enabled, fully passive harmonic millimeter-wave identification (mmID) system that unites wide-area coverage with precise localization. The design integrates a cross-polarized dual-band antenna, a zero-bias frequency doubler, and a low-loss polytetrafluoroethylene (PTFE) dielectric lens, with lens geometry synthesized through ray tracing at fundamental and harmonic frequencies to ensure focal stability for incidence angles up to $\pm {\mathrm {55~\!{^{\circ}}}}$ . The Schottky diode frequency doubler was rigorously modeled through current–voltage (I–V) fitting and through–reflect–line (TRL) deembedding to extract an accurate equivalent circuit. The complete mmID achieves a peak harmonic radar cross section (RCS) of $\mathrm {-29.1~\text{dBsm} }$ and −10 dB angular coverage across $\pm {\mathrm {55~ {^{\circ}}}}$ , corresponding to a 2.679-sr solid angle. In localization tests with a proof-of-concept (PoC) reader, the retrodirective harmonic mmID delivered mean ranging errors below 4 cm up to 82.5 m and submillimeter accuracy using phase-based tracking within 25 m, while link budget analysis projects maximum ranges of 1.5 km at boresight and 1.2 km at $\pm {\mathrm {55~ {^{\circ}}}}$ . By combining passive operation, wide angular coverage, and long-range precision, the proposed harmonic mmID provides a scalable, low-maintenance platform for emerging 5G/millimeter-wave (mmWave) cyber-physical systems (CPS) and IoT environments.
- 1 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (1) , 485-498
Advancing Self-Sustainable Ultralong-Range Microlocalization: A Fully Passive Multibeam Harmonic mmID With Extended Angular Coverage for Next-Generation IoT Infrastructures
The rapid expansion of next-generation Internet-of-Things (IoT) infrastructures demands scalable, battery-free sensing systems capable of accurate long-range detection, motivating the shift from battery-powered devices to fully passive architectures. This work presents a lens-enabled, fully passive harmonic millimeter-wave identification (mmID) system that unites wide-area coverage with precise localization. The design integrates a cross-polarized dual-band antenna, a zero-bias frequency doubler, and a low-loss polytetrafluoroethylene (PTFE) dielectric lens, with lens geometry synthesized through ray tracing at fundamental and harmonic frequencies to ensure focal stability for incidence angles up to $\pm {\mathrm {55~\!{^{\circ}}}}$ . The Schottky diode frequency doubler was rigorously modeled through current–voltage (I–V) fitting and through–reflect–line (TRL) deembedding to extract an accurate equivalent circuit. The complete mmID achieves a peak harmonic radar cross section (RCS) of $\mathrm {-29.1~\text{dBsm} }$ and −10 dB angular coverage across $\pm {\mathrm {55~ {^{\circ}}}}$ , corresponding to a 2.679-sr solid angle. In localization tests with a proof-of-concept (PoC) reader, the retrodirective harmonic mmID delivered mean ranging errors below 4 cm up to 82.5 m and submillimeter accuracy using phase-based tracking within 25 m, while link budget analysis projects maximum ranges of 1.5 km at boresight and 1.2 km at $\pm {\mathrm {55~ {^{\circ}}}}$ . By combining passive operation, wide angular coverage, and long-range precision, the proposed harmonic mmID provides a scalable, low-maintenance platform for emerging 5G/millimeter-wave (mmWave) cyber-physical systems (CPS) and IoT environments.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1320-1323
A 2.2–82-GHz Ultrabroadband Wilkinson Power Divider Using a Multisection Folded Inductor in 130-nm SiGe BiCMOS
An ultrabroadband Wilkinson power divider employing a single-folded inductor is presented. Unlike conventional designs with discrete inductors, this work utilizes a multisection topology with a symmetric inductor that leverages mutual inductance to significantly extend the fractional bandwidth (FBW). The divider achieves over 10-dB return loss and isolation across 2.2–82 GHz, corresponding to a 190% FBW. Plus, custom-designed metal-oxide–metal (MOM) shunt capacitors and resistors are embedded at the crossing section of the inductor paths to reduce parasitic inductance and additional loss, achieving 2.2-dB insertion loss at 80 GHz. Furthermore, the measured amplitude and phase imbalances are under 0.1 dB and 0.3°, respectively, due to a novel electrical length compensation technique. To the best of the authors’ knowledge, this design offers the widest FBW reported to date among Wilkinson power dividers.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1320-1323
A 2.2–82-GHz Ultrabroadband Wilkinson Power Divider Using a Multisection Folded Inductor in 130-nm SiGe BiCMOS
An ultrabroadband Wilkinson power divider employing a single-folded inductor is presented. Unlike conventional designs with discrete inductors, this work utilizes a multisection topology with a symmetric inductor that leverages mutual inductance to significantly extend the fractional bandwidth (FBW). The divider achieves over 10-dB return loss and isolation across 2.2–82 GHz, corresponding to a 190% FBW. Plus, custom-designed metal-oxide–metal (MOM) shunt capacitors and resistors are embedded at the crossing section of the inductor paths to reduce parasitic inductance and additional loss, achieving 2.2-dB insertion loss at 80 GHz. Furthermore, the measured amplitude and phase imbalances are under 0.1 dB and 0.3°, respectively, due to a novel electrical length compensation technique. To the best of the authors’ knowledge, this design offers the widest FBW reported to date among Wilkinson power dividers.
- 31 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 776-779
Novel Low-Loss Shielded Interconnects for D-Band/Sub-THz Applications Using Microscale Metal Printing Technologies
This work presents the first demonstration of a shielded interconnect geometry enabled by a novel metal microadditive manufacturing ( $\mu $ AM) process. The printed interconnect operates at the D band (110–170 GHz) and features an innovative helical-shaped geometry that resembles the ideal transmission performance of a microscale coaxial cable, significantly reducing the impedance mismatch losses that are typically observed in conventional wirebonding interconnects when utilized beyond 100 GHz. The measurements demonstrate superior and reliable performance at least up to 155 GHz with an insertion loss (IL) below 1.5 dB and an RL greater than 10 dB. The proposed $\mu $ AM-enabled interconnect has the potential to pave the way for the next generation of heterogeneous packaging solutions targeted for sub-terahertz (THz) applications that require robust and broadband performance.
- 31 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 776-779
Novel Low-Loss Shielded Interconnects for D-Band/Sub-THz Applications Using Microscale Metal Printing Technologies
This work presents the first demonstration of a shielded interconnect geometry enabled by a novel metal microadditive manufacturing ( $\mu $ AM) process. The printed interconnect operates at the D band (110–170 GHz) and features an innovative helical-shaped geometry that resembles the ideal transmission performance of a microscale coaxial cable, significantly reducing the impedance mismatch losses that are typically observed in conventional wirebonding interconnects when utilized beyond 100 GHz. The measurements demonstrate superior and reliable performance at least up to 155 GHz with an insertion loss (IL) below 1.5 dB and an RL greater than 10 dB. The proposed $\mu $ AM-enabled interconnect has the potential to pave the way for the next generation of heterogeneous packaging solutions targeted for sub-terahertz (THz) applications that require robust and broadband performance.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1371-1374
A 50-GHz SiGe Frequency Quadrupler With 42-dBc Harmonic Rejection and 17% Peak Total Efficiency
This letter introduces a highly efficient 50-GHz SiGe frequency quadrupler with exceptional harmonic rejection capabilities. Utilizing a design comprised of two consecutive doublers, it features a truly symmetric transformer balun with LC matching topology and ensures maximal rejection of odd harmonics with high total efficiency. The transformer balun achieves remarkably a low amplitude imbalance of 0.03 dB and a phase imbalance of 0.3 $^{\circ}$ within the 3-dB fractional bandwidth from 48 to 52 GHz and exhibits a minimum harmonic rejection ratio (HRR) of 42 dBc from the fundamental to the seventh harmonic. The device delivers a peak output power of 5.4 dBm at an input power of 1 dBm, maintaining a high peak total efficiency of 17%. According to the best of authors’ knowledge, this represents the highest HRR and total efficiency found to date among all E-, U-, V-, and W-band frequency quadruplers.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1371-1374
A 50-GHz SiGe Frequency Quadrupler With 42-dBc Harmonic Rejection and 17% Peak Total Efficiency
This letter introduces a highly efficient 50-GHz SiGe frequency quadrupler with exceptional harmonic rejection capabilities. Utilizing a design comprised of two consecutive doublers, it features a truly symmetric transformer balun with LC matching topology and ensures maximal rejection of odd harmonics with high total efficiency. The transformer balun achieves remarkably a low amplitude imbalance of 0.03 dB and a phase imbalance of 0.3 $^{\circ}$ within the 3-dB fractional bandwidth from 48 to 52 GHz and exhibits a minimum harmonic rejection ratio (HRR) of 42 dBc from the fundamental to the seventh harmonic. The device delivers a peak output power of 5.4 dBm at an input power of 1 dBm, maintaining a high peak total efficiency of 17%. According to the best of authors’ knowledge, this represents the highest HRR and total efficiency found to date among all E-, U-, V-, and W-band frequency quadruplers.
- 30 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (6) , 785-788
A W-Band Stacked Frequency Quadrupler With a Dual-Driven Core Achieving 10.3% Drain Efficiency
A $W$ -band stacked quadrupler with a dual-driven second-stage doubler is presented that, to the best of the authors’ knowledge, demonstrates the highest $W$ -band drain efficiency in silicon while maintaining a competitive output power and harmonic rejection. Implemented in a 90-nm SiGe BiCMOS process, the proposed topology circumvents the need for an interstage balun by using a pair of push–push doublers (PPDs), whose input signals are 90 $^{\circ}$ out-of-phase, as an input stage to drive a third, dual-driven push–push doubler. The stacked dual-driven second stage allows for current reuse between the two stages while maintaining a large input swing on the output stage, promoting a highly efficient design. As a result, the quadrupler achieves a peak conversion gain of 2.2 dB, a peak output power of 6.8 dBm, a harmonic rejection of greater than 31 dBc, and a peak drain efficiency of 10.3%.
- 30 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (6) , 785-788
A W-Band Stacked Frequency Quadrupler With a Dual-Driven Core Achieving 10.3% Drain Efficiency
A $W$ -band stacked quadrupler with a dual-driven second-stage doubler is presented that, to the best of the authors’ knowledge, demonstrates the highest $W$ -band drain efficiency in silicon while maintaining a competitive output power and harmonic rejection. Implemented in a 90-nm SiGe BiCMOS process, the proposed topology circumvents the need for an interstage balun by using a pair of push–push doublers (PPDs), whose input signals are 90 $^{\circ}$ out-of-phase, as an input stage to drive a third, dual-driven push–push doubler. The stacked dual-driven second stage allows for current reuse between the two stages while maintaining a large input swing on the output stage, promoting a highly efficient design. As a result, the quadrupler achieves a peak conversion gain of 2.2 dB, a peak output power of 6.8 dBm, a harmonic rejection of greater than 31 dBc, and a peak drain efficiency of 10.3%.
- 28 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1663-1674
How to Consider SEEs When Designing a SiGe Low-Noise Amplifier—An Overview
The application of radiation-hardening by design (RHBD) to the low-noise amplifier (LNA) in an RF communications receiver has promise for improving data fidelity in applications subject to single-event effects (SEEs). In order to overcome the challenges of empirically modeling single-event-transient (SET) propagation in RF receivers, calibrated technology computer-aided design (TCAD) is used to perform mixed-mode simulations and identify viable RHBD approaches for SiGe cascode LNAs. Example results at X-band (8–12 GHz) are used to demonstrate these approaches. Finally, the findings in the present work are organized into a proposed radiation-hardening design flow to aid circuit and system engineers who wish to consider single-event-upset (SEU) rates in the performance of their LNAs.
- 28 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1663-1674
How to Consider SEEs When Designing a SiGe Low-Noise Amplifier—An Overview
The application of radiation-hardening by design (RHBD) to the low-noise amplifier (LNA) in an RF communications receiver has promise for improving data fidelity in applications subject to single-event effects (SEEs). In order to overcome the challenges of empirically modeling single-event-transient (SET) propagation in RF receivers, calibrated technology computer-aided design (TCAD) is used to perform mixed-mode simulations and identify viable RHBD approaches for SiGe cascode LNAs. Example results at X-band (8–12 GHz) are used to demonstrate these approaches. Finally, the findings in the present work are organized into a proposed radiation-hardening design flow to aid circuit and system engineers who wish to consider single-event-upset (SEU) rates in the performance of their LNAs.