Shi Liu
Research Subjects
Shi Liu has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Jierui Zhang
6 shared publications- Da Xu
Changchun Univ Sci & Technol, Sch Optoelect Engn, Changchun 130022, Jilin, Peoples R China
3 shared publications Jianhua Yang
3 shared publicationsYao Meng
Jilin Province Engineering Research Center
3 shared publicationsYutian Peng
3 shared publications- Gaofei Sun
Jilin Province Engineering Research Center
2 shared publications
Latest Publications
- 26 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (18) , 34835
Research on methods for improving irradiance uniformity based on the analysis of the energy transmission characteristics of solar simulator
Aiming at the issue that the irradiance uniformity of the existing solar simulator is difficult to enhance further, based on the theories of geometrical and matrix optics, the characteristics of energy transmission in the optical system of the solar simulator were analyzed. The influence of the optical axis offsets of each subsystem on the irradiance non-uniformity was studied by using LightTools. Based on the analysis and research of the energy transmission characteristics, a method for optical axis calibration was proposed. The total optical axis offset was fitted by the least squares method to obtain the curve of irradiance non-uniformity change. Finally, a calibration experiment of the optical axis was established to verify and test the irradiance distribution and calculate the irradiance non-uniformity. The results show that compared with the traditional self-collimation-based solar simulator optical axis calibration method, the irradiance non-uniformity within 100 mm × 100 mm of the square facula is 0.86%, and the irradiance uniformity of the solar simulator has been further improved.
- 26 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (18) , 34835
Research on methods for improving irradiance uniformity based on the analysis of the energy transmission characteristics of solar simulator
Aiming at the issue that the irradiance uniformity of the existing solar simulator is difficult to enhance further, based on the theories of geometrical and matrix optics, the characteristics of energy transmission in the optical system of the solar simulator were analyzed. The influence of the optical axis offsets of each subsystem on the irradiance non-uniformity was studied by using LightTools. Based on the analysis and research of the energy transmission characteristics, a method for optical axis calibration was proposed. The total optical axis offset was fitted by the least squares method to obtain the curve of irradiance non-uniformity change. Finally, a calibration experiment of the optical axis was established to verify and test the irradiance distribution and calculate the irradiance non-uniformity. The results show that compared with the traditional self-collimation-based solar simulator optical axis calibration method, the irradiance non-uniformity within 100 mm × 100 mm of the square facula is 0.86%, and the irradiance uniformity of the solar simulator has been further improved.
- 21 November 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (23) , 6705-6708
Research on the aperture angle-matched collimated illumination method for the dark-state light leakage of LCD target simulators
Aiming at the problem of overbrightness of the target simulator background for LED backlight panel illumination, a 5° aperture angle-matched collimated illumination method for the target simulator is proposed based on the study of the dark-state leakage of the LCD display device and the scattered stray light of the system. After simulation analysis the method can make the display contrast increase by 3.1 times and solve the problem of dark targets being drowned by the background bright light, which exists in the LED illumination target simulator. It is experimentally verified that the target simulator using the aperture angle-matched collimated illumination method shows a 2.8 times improvement in SNR and effectively reduces the energy of the dark-state background.
- 21 November 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (23) , 6705-6708
Research on the aperture angle-matched collimated illumination method for the dark-state light leakage of LCD target simulators
Aiming at the problem of overbrightness of the target simulator background for LED backlight panel illumination, a 5° aperture angle-matched collimated illumination method for the target simulator is proposed based on the study of the dark-state leakage of the LCD display device and the scattered stray light of the system. After simulation analysis the method can make the display contrast increase by 3.1 times and solve the problem of dark targets being drowned by the background bright light, which exists in the LED illumination target simulator. It is experimentally verified that the target simulator using the aperture angle-matched collimated illumination method shows a 2.8 times improvement in SNR and effectively reduces the energy of the dark-state background.
- 26 September 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (21) , 36708-36728
Research on multi-optical axis online compensation alignment method for space environment simulation system
Aiming at the problem that the error of multi-optical axis alignment is difficult to control in the simulation calibration test, a multi-optical axis dynamic compensation alignment method for the space environment simulation system is proposed. The effect of optical axis disturbance on the signal detection link was analyzed to obtain the alignment accuracy requirements, the optical axis alignment error compensation mechanism was established, the target simulation system with long pupil distance was designed, the alignment error transfer model based on topology structure was constructed, and the test prototype was built. The test results show that the static attitude alignment resolution is better than 3" and the position alignment resolution is better than 11µm. After online compensation, the position error is better than 11.04µm, and the energy error is better than 3.2%, which realizes the online monitoring and compensation of the optical axis alignment error of the ground space environment simulation system.
- 26 September 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (21) , 36708-36728
Research on multi-optical axis online compensation alignment method for space environment simulation system
Aiming at the problem that the error of multi-optical axis alignment is difficult to control in the simulation calibration test, a multi-optical axis dynamic compensation alignment method for the space environment simulation system is proposed. The effect of optical axis disturbance on the signal detection link was analyzed to obtain the alignment accuracy requirements, the optical axis alignment error compensation mechanism was established, the target simulation system with long pupil distance was designed, the alignment error transfer model based on topology structure was constructed, and the test prototype was built. The test results show that the static attitude alignment resolution is better than 3" and the position alignment resolution is better than 11µm. After online compensation, the position error is better than 11.04µm, and the energy error is better than 3.2%, which realizes the online monitoring and compensation of the optical axis alignment error of the ground space environment simulation system.
- Open Access
- 27 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (7) , 2826
Research on Optical System of Dim Target Simulator Based on Polarization Stray Light Suppression
In view of the lack of high-precision optical simulation equipment for dim space targets at present, in this study, a simulation method for dim space targets based on polarization stray light suppression is proposed, the overall optical system architecture of the optical engine for depolarization stray light suppression is constructed, the mechanism of stray light generation is explored, and the dark state light leakage suppression method is presented by compensating the phase of LCOS reflected light with wave plate; a high-image quality collimating optical system with large field of view and flat aberration is designed based on the illumination system optimization method of the critical angle matching of the spectroscopic film; and the polarization stray light suppression effect and star position simulation error of the dim target simulator are tested. The test results show that the illumination of the simulated dim target is ≮10−10 lx, the contrast is 6.96, the non-uniformity of the bright state is only 5.88%, and the simulation error of the star position is 9.9″. This research can make some contributions to enhancing the observability of detecting dim targets, breaking through the detection technology of extremely dark targets in space, developing advanced deep space detection capabilities, and improving the engineering technology system of deep space exploration.
- 27 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (7) , 2826
Open AccessResearch on Optical System of Dim Target Simulator Based on Polarization Stray Light Suppression
In view of the lack of high-precision optical simulation equipment for dim space targets at present, in this study, a simulation method for dim space targets based on polarization stray light suppression is proposed, the overall optical system architecture of the optical engine for depolarization stray light suppression is constructed, the mechanism of stray light generation is explored, and the dark state light leakage suppression method is presented by compensating the phase of LCOS reflected light with wave plate; a high-image quality collimating optical system with large field of view and flat aberration is designed based on the illumination system optimization method of the critical angle matching of the spectroscopic film; and the polarization stray light suppression effect and star position simulation error of the dim target simulator are tested. The test results show that the illumination of the simulated dim target is ≮10−10 lx, the contrast is 6.96, the non-uniformity of the bright state is only 5.88%, and the simulation error of the star position is 9.9″. This research can make some contributions to enhancing the observability of detecting dim targets, breaking through the detection technology of extremely dark targets in space, developing advanced deep space detection capabilities, and improving the engineering technology system of deep space exploration.
- 28 November 2022
- Published by Elsevier in Optics Communications
- Vol. 530
Research on evaluation index of stray light suppression ability of star sensor based on signal-to-noise ratio
- 28 November 2022
- Published by Elsevier in Optics Communications
- Vol. 530
Research on evaluation index of stray light suppression ability of star sensor based on signal-to-noise ratio
- Open Access
Canvas: Isolated and Adaptive Swapping for Multi-Applications on Remote Memory
Remote memory techniques for datacenter applications have recently gained a great deal of popularity. Existing remote memory techniques focus on the efficiency of a single application setting only. However, when multiple applications co-run on a remote-memory system, significant interference could occur, resulting in unexpected slowdowns even if the same amounts of physical resources are granted to each application. This slowdown stems from massive sharing in applications' swap data paths. Canvas is a redesigned swap system that fully isolates swap paths for remote-memory applications. Canvas allows each application to possess its dedicated swap partition, swap cache, prefetcher, and RDMA bandwidth. Swap isolation lays a foundation for adaptive optimization techniques based on each application's own access patterns and needs. We develop three such techniques: (1) adaptive swap entry allocation, (2) semantics-aware prefetching, and (3) two-dimensional RDMA scheduling. A thorough evaluation with a set of widely-deployed applications demonstrates that Canvas minimizes performance variation and dramatically reduces performance degradation.
Open AccessCanvas: Isolated and Adaptive Swapping for Multi-Applications on Remote Memory
Remote memory techniques for datacenter applications have recently gained a great deal of popularity. Existing remote memory techniques focus on the efficiency of a single application setting only. However, when multiple applications co-run on a remote-memory system, significant interference could occur, resulting in unexpected slowdowns even if the same amounts of physical resources are granted to each application. This slowdown stems from massive sharing in applications' swap data paths. Canvas is a redesigned swap system that fully isolates swap paths for remote-memory applications. Canvas allows each application to possess its dedicated swap partition, swap cache, prefetcher, and RDMA bandwidth. Swap isolation lays a foundation for adaptive optimization techniques based on each application's own access patterns and needs. We develop three such techniques: (1) adaptive swap entry allocation, (2) semantics-aware prefetching, and (3) two-dimensional RDMA scheduling. A thorough evaluation with a set of widely-deployed applications demonstrates that Canvas minimizes performance variation and dramatically reduces performance degradation.
- 4 October 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (29) , 8753-8765
Optical design of a solar simulator for meteorological fields to improve irradiance uniformity and expand the range of irradiation regulation
Aiming at the problems of low irradiation uniformity and a narrow irradiance regulation range in the existing solar simulators, an optical design method for meteorological solar simulators with high irradiation uniformity and wide-range irradiance is proposed. Using a xenon lamp and a variable coefficient non-coaxial ellipsoid reflector as the concentrator system, we analyze the causes of stray light in the optical integrator. The optimal design method of the integrator based on the anti-crosstalk diaphragm and the light propagation matrix model, which effectively suppress the stray light, is proposed. The irradiance regulation system is designed to continuously regulate the irradiance in a wide range. The optimal design method of the collimated system is given. The rationality of the system design is verified by the simulation of LightTools software. The results show that within the effective irradiation surface of 100 m m × 100 m m , the irradiance is continuously adjustable in the range of 100 − 1400 W / m 2 , and the irradiation uniformity is better than 99.10% under different irradiances. This research breaks through the limitations of low irradiation uniformity and a narrow irradiance adjustment range of traditional meteorological solar simulators and can provide accurate and reliable solar irradiance for the verification and calibration of pyranometers.
- 4 October 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (29) , 8753-8765
Optical design of a solar simulator for meteorological fields to improve irradiance uniformity and expand the range of irradiation regulation
Aiming at the problems of low irradiation uniformity and a narrow irradiance regulation range in the existing solar simulators, an optical design method for meteorological solar simulators with high irradiation uniformity and wide-range irradiance is proposed. Using a xenon lamp and a variable coefficient non-coaxial ellipsoid reflector as the concentrator system, we analyze the causes of stray light in the optical integrator. The optimal design method of the integrator based on the anti-crosstalk diaphragm and the light propagation matrix model, which effectively suppress the stray light, is proposed. The irradiance regulation system is designed to continuously regulate the irradiance in a wide range. The optimal design method of the collimated system is given. The rationality of the system design is verified by the simulation of LightTools software. The results show that within the effective irradiation surface of 100 m m × 100 m m , the irradiance is continuously adjustable in the range of 100 − 1400 W / m 2 , and the irradiation uniformity is better than 99.10% under different irradiances. This research breaks through the limitations of low irradiation uniformity and a narrow irradiance adjustment range of traditional meteorological solar simulators and can provide accurate and reliable solar irradiance for the verification and calibration of pyranometers.