Liang Mi
Liang Mi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Chen Heng
National Machine Tool Production Quality Supervision Testing Center (Sichuan), Chengdu 610200, China
2 shared publications - Chuangui Yang
Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang, China
2 shared publications - Liu Xingbao
Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang, China, and National Machine Tool Production Quality Supervision Testing Center, Mianyang, China
2 shared publications - Qiang Tang
CAEP, Inst Machinery Mfg Technol, Mianyang, Sichuan, Peoples R China
2 shared publications - Xia Yangqiu
Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang, China, and National Machine Tool Production Quality Supervision Testing Center, Mianyang, China
2 shared publications - Yangqiu Xia
Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang, China
2 shared publications
Latest Publications
- 20 July 2023
- Published by Polish Academy of Sciences Chancellery in Metrology and Measurement Systems
- Vol. 28 (1) , 181-190
An improved angle calibration method of a high-precision angle comparator
- 20 July 2023
- Published by Polish Academy of Sciences Chancellery in Metrology and Measurement Systems
- Vol. 28 (1) , 181-190
An improved angle calibration method of a high-precision angle comparator
- Open Access
- 30 November 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (12) , 2121
Radial Error Motion Measurement and Its Uncertainty Estimation of Ultra Precision Axes of Rotation with Nanometer Level Precision
The radial error is the key performance indicator of ultra-precision axis. In order to measure and evaluate the radial error of ultra-precision axis with nanometer accuracy, a measurement system with an accuracy of nanometer based on capacitive displacement probes and standard spheres is developed. The nonlinearity error of capacitive displacement probes, misalignment error of the probes, eccentric error of standard spheres, error caused by environment temperature change, environment vibration and error separation methods are analyzed and the effects of the above factors are obtained; Multiple measurement examples carried out with the measurement system this paaper constructed indicate the repeatability of the measurement system reaches 10.5 nm and the roundness error of artifact separated is less than 4.03 nm. In order to evaluate the measurement dispersion of the ultra-precision axis radial error, the major uncertainty components and the complete process of the comprehensive evaluation of the measurement uncertainty are proposed. The combined uncertainty of radial error motion measurement of the ultra-precision axis with Donaldson reversal is 31.64 nm (k = 2).
- 30 November 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (12) , 2121
Open AccessRadial Error Motion Measurement and Its Uncertainty Estimation of Ultra Precision Axes of Rotation with Nanometer Level Precision
The radial error is the key performance indicator of ultra-precision axis. In order to measure and evaluate the radial error of ultra-precision axis with nanometer accuracy, a measurement system with an accuracy of nanometer based on capacitive displacement probes and standard spheres is developed. The nonlinearity error of capacitive displacement probes, misalignment error of the probes, eccentric error of standard spheres, error caused by environment temperature change, environment vibration and error separation methods are analyzed and the effects of the above factors are obtained; Multiple measurement examples carried out with the measurement system this paaper constructed indicate the repeatability of the measurement system reaches 10.5 nm and the roundness error of artifact separated is less than 4.03 nm. In order to evaluate the measurement dispersion of the ultra-precision axis radial error, the major uncertainty components and the complete process of the comprehensive evaluation of the measurement uncertainty are proposed. The combined uncertainty of radial error motion measurement of the ultra-precision axis with Donaldson reversal is 31.64 nm (k = 2).
- 14 August 2018
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 45 (4) , 492-504
Uncertainty analysis and evaluation of measurement of the positioning repeatability for industrial robots
Purpose: This paper aims to solve the nonlinear problem in the uncertainty evaluation of the measurement of the positioning repeatability (RP) of industrial robots and provide guidance to restrict the uncertainty of measurement of RP (uRP). Design/methodology/approach: Firstly, some uncertain sources existing in the measurement procedure of RP are identified. Secondly, the probability distribution function (PDF) of every source is established on the basis of its measurements. Some spatial combined normal distributions are adopted. Then, a method, based on Monte Carlo method (MCM) and established measurement model, is developed for the estimation of uRP. Thirdly, some tests are developed for the identification and validation of the selected PDFs of uncertain sources. Afterwards, the proposed method is applied for the evaluation and validation of the uRP. Finally, influence analyses of some key factors are proposed for the quantification of their relative contributions to uRP. Findings: Results show that the proposed method can reasonably and objectively estimate the uRP of the selected industrial robot, and changes of the industrial robots’ position and the laser trackers measurement are correlated. Additionally, the uRP of the selected industrial robot can be restricted by using the results of its key factors on uRP. Originality/value: This paper proposes the spatial combined normal distribution to model the uncertainty of the repeatability of the laser tracker and industrial robot. Meanwhile, the proposed method and influence analyses can be used in estimating and restricting the uRP and thus useful in determining whether the RP of a tested industrial robot meets its requirements.
- 14 August 2018
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 45 (4) , 492-504
Uncertainty analysis and evaluation of measurement of the positioning repeatability for industrial robots
Purpose: This paper aims to solve the nonlinear problem in the uncertainty evaluation of the measurement of the positioning repeatability (RP) of industrial robots and provide guidance to restrict the uncertainty of measurement of RP (uRP). Design/methodology/approach: Firstly, some uncertain sources existing in the measurement procedure of RP are identified. Secondly, the probability distribution function (PDF) of every source is established on the basis of its measurements. Some spatial combined normal distributions are adopted. Then, a method, based on Monte Carlo method (MCM) and established measurement model, is developed for the estimation of uRP. Thirdly, some tests are developed for the identification and validation of the selected PDFs of uncertain sources. Afterwards, the proposed method is applied for the evaluation and validation of the uRP. Finally, influence analyses of some key factors are proposed for the quantification of their relative contributions to uRP. Findings: Results show that the proposed method can reasonably and objectively estimate the uRP of the selected industrial robot, and changes of the industrial robots’ position and the laser trackers measurement are correlated. Additionally, the uRP of the selected industrial robot can be restricted by using the results of its key factors on uRP. Originality/value: This paper proposes the spatial combined normal distribution to model the uncertainty of the repeatability of the laser tracker and industrial robot. Meanwhile, the proposed method and influence analyses can be used in estimating and restricting the uRP and thus useful in determining whether the RP of a tested industrial robot meets its requirements.
- 15 May 2017
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 44 (3) , 343-352
A four-point measurement model for evaluating the pose of industrial robot and its influence factor analysis
Purpose: This paper aims to propose a four-point measurement model for directly measuring the pose (i.e. position and orientation) of industrial robot and reducing its calculating error and measurement uncertainty. Design/methodology/approach: A four-point measurement model is proposed for directly measuring poses of industrial robots. First, this model consists of a position measurement model and an orientation model gotten by the position of spherically mounted reflector (SMR). Second, an influence factor analysis, simulated by Monte Carlo simulation, is performed to investigate the influence of certain factors on the accuracy and uncertainty. Third, comparisons with the common method are carried out to verify the advantage of this model. Finally, a test is carried out for evaluating the repeatability of five poses of an industrial robot. Findings: In this paper, results show that the proposed model is better than the three-SMRs model in measurement accuracy, measurement uncertainty and computational efficiency. Moreover, both measurement accuracy and measurement uncertainty can be improved by using the proposed influence laws of its key parameters on the proposed model. Originality/value: The proposed model can measure poses of industrial robots directly, accurately and effectively. Additionally, influence laws of key factors on the accuracy and uncertainty of the proposed model are given to provide some guidelines for improving the performance of the proposed model.
- 15 May 2017
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 44 (3) , 343-352
A four-point measurement model for evaluating the pose of industrial robot and its influence factor analysis
Purpose: This paper aims to propose a four-point measurement model for directly measuring the pose (i.e. position and orientation) of industrial robot and reducing its calculating error and measurement uncertainty. Design/methodology/approach: A four-point measurement model is proposed for directly measuring poses of industrial robots. First, this model consists of a position measurement model and an orientation model gotten by the position of spherically mounted reflector (SMR). Second, an influence factor analysis, simulated by Monte Carlo simulation, is performed to investigate the influence of certain factors on the accuracy and uncertainty. Third, comparisons with the common method are carried out to verify the advantage of this model. Finally, a test is carried out for evaluating the repeatability of five poses of an industrial robot. Findings: In this paper, results show that the proposed model is better than the three-SMRs model in measurement accuracy, measurement uncertainty and computational efficiency. Moreover, both measurement accuracy and measurement uncertainty can be improved by using the proposed influence laws of its key parameters on the proposed model. Originality/value: The proposed model can measure poses of industrial robots directly, accurately and effectively. Additionally, influence laws of key factors on the accuracy and uncertainty of the proposed model are given to provide some guidelines for improving the performance of the proposed model.