Kazumasa Takabayashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kazumasa Takabayashi has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Hitoshi Kawashima
Ultrafast Photonic Devices Lab., AIST, Tsukuba, Ibaraki Japan 305-8568
3 shared publications - Kazuhiro Ikeda
National Institute of Advanced Industrial Science and Technology (AIST)
3 shared publications - Keijiro Suzuki
National Institute of Advanced Industrial Science and Technology (AIST)
3 shared publications - Ryotaro Konoike
National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan
3 shared publications - Shigeaki Sekiguchi
Nanotechnology Research Center, Fujitsu Laboratories Ltd., Atsugi, Kanagawa Japan
3 shared publications - Suguru Akiyama
Devices & Materials Laboratory, Fujitsu Laboratories Ltd., Atsugi, Kanagawa Japan
3 shared publications
Latest Publications
- Open Access
- 20 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 2930-2937
Gain-Integrated 8 × 8 Silicon Photonics Multicast Switch With On-Chip 2 × 4-ch. SOAs
In order to support continuous growth of global IP traffic, highly energy-efficient networks are demanded. One of the key components is an optical multicast switch which has large bandwidth with small power consumption. When using multicast switches, however, intrinsic losses will be an issue especially for large port count switches. Erbium doped fiber amplifiers (EDFAs) are typically used for the loss compensation, although it would much increase the number of components and footprint of the system. One of the options to solve this problem would be an integration technology of semiconductor optical amplifiers (SOAs) on the silicon photonics switches which we have recently developed. In previous work, we have demonstrated a gain-integrated 4 × 4 silicon matrix switch. For the practical use of our technology, it is very important to show further scalability of the platform. Moreover, it is also important to show applicability to other switch topologies, such as multicast switches. In this paper, we demonstrate an 8 × 8 silicon photonics MCS with on-chip integrated 2 × 4-ch. SOAs. The on-chip SOAs exhibit a net gain of ~9 dB, which almost compensates for the intrinsic loss. We observe the crosstalk of less than —35 dB. Loss/crosstalk reduction and chip power consumption are also discussed.
- 20 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 2930-2937
Open AccessGain-Integrated 8 × 8 Silicon Photonics Multicast Switch With On-Chip 2 × 4-ch. SOAs
In order to support continuous growth of global IP traffic, highly energy-efficient networks are demanded. One of the key components is an optical multicast switch which has large bandwidth with small power consumption. When using multicast switches, however, intrinsic losses will be an issue especially for large port count switches. Erbium doped fiber amplifiers (EDFAs) are typically used for the loss compensation, although it would much increase the number of components and footprint of the system. One of the options to solve this problem would be an integration technology of semiconductor optical amplifiers (SOAs) on the silicon photonics switches which we have recently developed. In previous work, we have demonstrated a gain-integrated 4 × 4 silicon matrix switch. For the practical use of our technology, it is very important to show further scalability of the platform. Moreover, it is also important to show applicability to other switch topologies, such as multicast switches. In this paper, we demonstrate an 8 × 8 silicon photonics MCS with on-chip integrated 2 × 4-ch. SOAs. The on-chip SOAs exhibit a net gain of ~9 dB, which almost compensates for the intrinsic loss. We observe the crosstalk of less than —35 dB. Loss/crosstalk reduction and chip power consumption are also discussed.
- Open Access
- 13 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (2) , 307-313
Hybrid-Integration of SOA on Silicon Photonics Platform Based on Flip-Chip Bonding
A precise flip-chip bonding (FCB) technology for indium phosphide semiconductor optical amplifiers (InP-SOAs) on a silicon photonics platform within less than ±1 μm alignment accuracy was developed. For efficient optical coupling and a relaxed alignment tolerance, the mode field on both the InP-SOAs and the Si waveguides was expanded by spot-size converters (SSCs). On the InP-SOAs, width-tapered SSCs were used to obtain an isotropic mode-field having an approximately 3-μm diameter. On the silicon photonics platform, dual-core SSCs were used to expand the same mode field size of 3 μm as for the SSCs on SOAs. Using our FCB technology and SSCs, an in-line optical amplification of 15 dB was achieved by in-line integrated SOAs with angled waveguides. The optical coupling losses were 7.7 dB, which included 5.1-dB excess losses by misalignment and a gap between InP-SOA and Si waveguides. A 4 × 4 Si switch with hybrid-integrated 4-ch SOA array was fabricated, and achieved the first demonstration of a lossless Si switch.
- 13 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (2) , 307-313
Open AccessHybrid-Integration of SOA on Silicon Photonics Platform Based on Flip-Chip Bonding
A precise flip-chip bonding (FCB) technology for indium phosphide semiconductor optical amplifiers (InP-SOAs) on a silicon photonics platform within less than ±1 μm alignment accuracy was developed. For efficient optical coupling and a relaxed alignment tolerance, the mode field on both the InP-SOAs and the Si waveguides was expanded by spot-size converters (SSCs). On the InP-SOAs, width-tapered SSCs were used to obtain an isotropic mode-field having an approximately 3-μm diameter. On the silicon photonics platform, dual-core SSCs were used to expand the same mode field size of 3 μm as for the SSCs on SOAs. Using our FCB technology and SSCs, an in-line optical amplification of 15 dB was achieved by in-line integrated SOAs with angled waveguides. The optical coupling losses were 7.7 dB, which included 5.1-dB excess losses by misalignment and a gap between InP-SOA and Si waveguides. A 4 × 4 Si switch with hybrid-integrated 4-ch SOA array was fabricated, and achieved the first demonstration of a lossless Si switch.
- 31 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (1) , 123-130
SOA-Integrated Silicon Photonics Switch and Its Lossless Multistage Transmission of High-Capacity WDM Signals
We experimentally demonstrate the lossless transmission of wavelength division multiplexing (WDM) signals through a silicon-photonics 4 × 4 switch with a flip-chip bonded 4-channel semiconductor optical amplifier (SOA). We first optimized the input power and gain of the SOA-integrated switch to obtain the optimum operation point in terms of the transmitted signal quality. We then performed simultaneous transmission of 8-ch, 32-Gbaud, SP 16-QAM WDM (800 Gbps) signals through all the four paths of the switch. The effect of crosstalk on the switch was very small, and thus could not be observed. We also examined multistage (up to four stages) transmission of the signals with circulating configurations. We show that even for a 4-stage transmission, the bit error rate of the transmitted signal is below the 20% forward-error-correction limit. Finally, we discuss approaches to improve the optical signal-to-noise ratio (OSNR) of the transmitted signals to enlarge the signal quality margin and increase the possible number of the cascading stages and/or WDM channels for wide applications.
- 31 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (1) , 123-130
SOA-Integrated Silicon Photonics Switch and Its Lossless Multistage Transmission of High-Capacity WDM Signals
We experimentally demonstrate the lossless transmission of wavelength division multiplexing (WDM) signals through a silicon-photonics 4 × 4 switch with a flip-chip bonded 4-channel semiconductor optical amplifier (SOA). We first optimized the input power and gain of the SOA-integrated switch to obtain the optimum operation point in terms of the transmitted signal quality. We then performed simultaneous transmission of 8-ch, 32-Gbaud, SP 16-QAM WDM (800 Gbps) signals through all the four paths of the switch. The effect of crosstalk on the switch was very small, and thus could not be observed. We also examined multistage (up to four stages) transmission of the signals with circulating configurations. We show that even for a 4-stage transmission, the bit error rate of the transmitted signal is below the 20% forward-error-correction limit. Finally, we discuss approaches to improve the optical signal-to-noise ratio (OSNR) of the transmitted signals to enlarge the signal quality margin and increase the possible number of the cascading stages and/or WDM channels for wide applications.