Jiwei Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiwei Lu has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Stuart A. Wolf
‡ Department of Materials Science and Engineering, University of Virginia, Charlottesville, Virginia 22904, USA; and Department of Physics, University of Virginia, Charlottesville, Virginia 22904, USA
8 shared publications- Arthur W. Lichtenberger
Electrical & Computer Engineering, University of Virginia, Charlottesville, Virginia United States 22904
2 shared publications - Cassandra L&Period; Fraser&Ast;1<&Sol;A<&Sol;Span<&Sol;Sup&Period
Department of Chemistry, University of Virginia, Charlottesville, USA
2 shared publications Guoqing Zhang
Department of Chemistry, University of Virginia, McCormick Road, Charlottesville, VA, USA
2 shared publicationsMan Gu
Department of Physics University of Virginia 382 McCormick Rd. 22904 Charlottesville VA
2 shared publications- Michael E. Cyberey
Department of Electrical Engineering, The University of Virginia, Charlottesville, USA
2 shared publications
Latest Publications
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (5) , 1-5
Growth and Characterization of NbTiN Films Synthesized by Reactive Bias Target Ion Beam Deposition (RBTIBD)
High energy gap Nb-based superconducting alloys with low normal state resistivity are fundamentally important for realization of low-loss high frequency circuits operating above the typical ~670 GHz gap frequency of elemental Nb. NbTiN has been shown to have a superconducting energy gap nearly twice that of elemental Nb, and is emerging as an important material for various detector and superconducting computing technologies. In this study, we report on the growth of high-quality face-centered cubic (FCC) NbTiN films through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD). This novel technique offers more degrees of freedom compared to conventional sputtering, notably through decoupling the plasma generation and target bias, through use of a hollow-cathode ion source and independently pulse biased sputtering targets. The reported films are of high quality, with increased transition temperatures, and reduced normal state resistivity and surface roughness, compared to our previously reported reactive magnetron sputtered NbTiN films. In particular, at UVA, we are investigating these NbTiN films for widebandgap all NbTiN superconducting-insulating-superconducting (SIS) mixers, kinetic inductance detectors (KID), and traveling-wave kinetic inductance parametric amplifier (TKIP) devices.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (5) , 1-5
Growth and Characterization of NbTiN Films Synthesized by Reactive Bias Target Ion Beam Deposition (RBTIBD)
High energy gap Nb-based superconducting alloys with low normal state resistivity are fundamentally important for realization of low-loss high frequency circuits operating above the typical ~670 GHz gap frequency of elemental Nb. NbTiN has been shown to have a superconducting energy gap nearly twice that of elemental Nb, and is emerging as an important material for various detector and superconducting computing technologies. In this study, we report on the growth of high-quality face-centered cubic (FCC) NbTiN films through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD). This novel technique offers more degrees of freedom compared to conventional sputtering, notably through decoupling the plasma generation and target bias, through use of a hollow-cathode ion source and independently pulse biased sputtering targets. The reported films are of high quality, with increased transition temperatures, and reduced normal state resistivity and surface roughness, compared to our previously reported reactive magnetron sputtered NbTiN films. In particular, at UVA, we are investigating these NbTiN films for widebandgap all NbTiN superconducting-insulating-superconducting (SIS) mixers, kinetic inductance detectors (KID), and traveling-wave kinetic inductance parametric amplifier (TKIP) devices.
- 5 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (6) , 1-6
NbTiN/AlN/NbTiN SIS Junctions Realized by Reactive Bias Target Ion Beam Deposition
The current state-of-the-art approach for SIS junction fabrication is based on magnetron sputtering and the Gurvitch Al overlayer trilayer process where an Al overlayer is deposited onto the Nb base electrode in order to subsequently grow a critical ~1 nm AlOx or AlN tunnel barrier. While the switch from AlOx to AlN barriers has significantly increased the achievable critical current density, and significant research has been performed to understand and optimize ICP AlN growth, the use of Nb electrodes provides an upper limit to the frequency range for low-noise operation when employed in THz mixer applications, and has lead to the study and use of alternative materials with higher transition temperatures (Tc) such as NbN and NbTiN. The Nb electrodes also impose stringent cooling requirements, replacement of both electrodes with higher Tc materials can increase the required device operating temperature to 10 K, thus reducing the power consumption of the refrigeration system, a building block for the realization of more energy efficient superconducting computing systems, such as those based on single-flux-quantum (SFQ) logic [6], [7], [8], [9]. In this work, we have departed from conventional SIS material growth techniques through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD) - that offers unique capabilities to tailor materials and interfaces. Using RBTIBD technology, we have realized the first ever NbTiN/AlN/NbTiN SIS junctions with highest yet reported sum-gap voltages exceeding 5.0 mV, potentially extending the theoretical limit of low-loss SIS mixing applications beyond 1.2 THz and relaxing the cooling requirements for superconducting device applications.
- 5 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (6) , 1-6
NbTiN/AlN/NbTiN SIS Junctions Realized by Reactive Bias Target Ion Beam Deposition
The current state-of-the-art approach for SIS junction fabrication is based on magnetron sputtering and the Gurvitch Al overlayer trilayer process where an Al overlayer is deposited onto the Nb base electrode in order to subsequently grow a critical ~1 nm AlOx or AlN tunnel barrier. While the switch from AlOx to AlN barriers has significantly increased the achievable critical current density, and significant research has been performed to understand and optimize ICP AlN growth, the use of Nb electrodes provides an upper limit to the frequency range for low-noise operation when employed in THz mixer applications, and has lead to the study and use of alternative materials with higher transition temperatures (Tc) such as NbN and NbTiN. The Nb electrodes also impose stringent cooling requirements, replacement of both electrodes with higher Tc materials can increase the required device operating temperature to 10 K, thus reducing the power consumption of the refrigeration system, a building block for the realization of more energy efficient superconducting computing systems, such as those based on single-flux-quantum (SFQ) logic [6], [7], [8], [9]. In this work, we have departed from conventional SIS material growth techniques through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD) - that offers unique capabilities to tailor materials and interfaces. Using RBTIBD technology, we have realized the first ever NbTiN/AlN/NbTiN SIS junctions with highest yet reported sum-gap voltages exceeding 5.0 mV, potentially extending the theoretical limit of low-loss SIS mixing applications beyond 1.2 THz and relaxing the cooling requirements for superconducting device applications.
- 11 February 2015
- Published by Springer Nature in Journal of Materials Research
- Vol. 30 (9) , 1430-1439
Radiation effects on the magnetism and the spin dependent transport in magnetic materials and nanostructures for spintronic applications
- 11 February 2015
- Published by Springer Nature in Journal of Materials Research
- Vol. 30 (9) , 1430-1439
Radiation effects on the magnetism and the spin dependent transport in magnetic materials and nanostructures for spintronic applications
- 19 August 2014
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 116 (7)
Magnetic damping and spin polarization of highly ordered B2 Co2FeAl thin films
Epitaxial Co2FeAl films were synthesized using the Biased Target Ion Beam Deposition technique. Post annealing yielded Co2FeAl films with an improved B2 chemical ordering. Both the magnetization and the Gilbert damping parameter were reduced with increased B2 ordering. A low damping parameter, ∼0.002, was attained in B2 ordered Co2FeAl films without the presence of the L21 Heusler phase, which suggests that the B2 structure is sufficient for providing low damping in Co2FeAl. The spin polarization was ∼53% and was insensitive to the chemical ordering.
- 19 August 2014
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 116 (7)
Magnetic damping and spin polarization of highly ordered B2 Co2FeAl thin films
Epitaxial Co2FeAl films were synthesized using the Biased Target Ion Beam Deposition technique. Post annealing yielded Co2FeAl films with an improved B2 chemical ordering. Both the magnetization and the Gilbert damping parameter were reduced with increased B2 ordering. A low damping parameter, ∼0.002, was attained in B2 ordered Co2FeAl films without the presence of the L21 Heusler phase, which suggests that the B2 structure is sufficient for providing low damping in Co2FeAl. The spin polarization was ∼53% and was insensitive to the chemical ordering.
- 18 August 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 105 (7)
Large epitaxial bi-axial strain induces a Mott-like phase transition in VO2
The metal insulator transition (MIT) in vanadium dioxide (VO2) has been an important topic for recent years. It has been generally agreed upon that the mechanism of the MIT in bulk VO2 is considered to be a collaborative Mott-Peierls transition, however, the effect of strain on the phase transition is much more complicated. In this study, the effect of the large strain on the properties of VO2 films was investigated. One remarkable result is that highly strained epitaxial VO2 thin films were rutile in the insulating state as well as in the metallic state. These highly strained VO2 films underwent an electronic phase transition without the concomitant Peierls transition. Our results also show that a very large tensile strain along the c-axis of rutile VO2 resulted in a phase transition temperature of ∼433 K, much higher than in any previous report. Our findings elicit that the metal insulator transition in VO2 can be driven by an electronic transition alone, rather the typical coupled electronic-structural transition.
- 18 August 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 105 (7)
Large epitaxial bi-axial strain induces a Mott-like phase transition in VO2
The metal insulator transition (MIT) in vanadium dioxide (VO2) has been an important topic for recent years. It has been generally agreed upon that the mechanism of the MIT in bulk VO2 is considered to be a collaborative Mott-Peierls transition, however, the effect of strain on the phase transition is much more complicated. In this study, the effect of the large strain on the properties of VO2 films was investigated. One remarkable result is that highly strained epitaxial VO2 thin films were rutile in the insulating state as well as in the metallic state. These highly strained VO2 films underwent an electronic phase transition without the concomitant Peierls transition. Our results also show that a very large tensile strain along the c-axis of rutile VO2 resulted in a phase transition temperature of ∼433 K, much higher than in any previous report. Our findings elicit that the metal insulator transition in VO2 can be driven by an electronic transition alone, rather the typical coupled electronic-structural transition.
- Open Access
Large epitaxial bi-axial strain induces a Mott-like phase transition in VO2
The metal insulator transition (MIT) in VO2 has been an important topic for recent years. It has been generally agreed that the mechanism of the MIT in bulk VO2 is considered to be a collaborative Mott-Peierls transition, however the effect of the strain on the phase transition is much more complicated. In this study the effect of the large strain on the properties of VO2 films was investigated. One remarkable result is that highly strained epitaxial VO2 thin films were rutile in the insulating state as well as in the metallic state. These highly strained VO2 films underwent an electronic phase transition without the concomitant Peierls transition. Our results also show that a very large tensile strain along the c-axis of rutile VO2 resulted in a phase transition temperature of ~ 433 K, much higher than in any previous report. Our findings elicit that the metal insulator transition in VO2 can be driven by an electronic transition alone, rather the typical coupled electronic-structural transition.
Open AccessLarge epitaxial bi-axial strain induces a Mott-like phase transition in VO2
The metal insulator transition (MIT) in VO2 has been an important topic for recent years. It has been generally agreed that the mechanism of the MIT in bulk VO2 is considered to be a collaborative Mott-Peierls transition, however the effect of the strain on the phase transition is much more complicated. In this study the effect of the large strain on the properties of VO2 films was investigated. One remarkable result is that highly strained epitaxial VO2 thin films were rutile in the insulating state as well as in the metallic state. These highly strained VO2 films underwent an electronic phase transition without the concomitant Peierls transition. Our results also show that a very large tensile strain along the c-axis of rutile VO2 resulted in a phase transition temperature of ~ 433 K, much higher than in any previous report. Our findings elicit that the metal insulator transition in VO2 can be driven by an electronic transition alone, rather the typical coupled electronic-structural transition.
- 6 June 2014
- Published by Wiley in Advanced Materials Interfaces
- Vol. 1 (7) , 1300126
Two‐Dimensional Mott Insulators in SrVO3 Ultrathin Films
Strongly correlated oxides that undergo a metal‐insulator transition (MIT) are a subject of great current interest for their potential application to future electronics as switches and sensors. Recent advances in thin film technology have opened up new avenues to tailor MIT for novel devices beyond conventional CMOS scaling. Here, dimensional‐crossover‐driven MITs are demonstrated in high‐quality epitaxial SrVO3 (SVO) thin films grown by a pulsed electron‐beam deposition technique. Thick SVO films (∼25 nm) exhibit metallic behavior with the electrical resistivity following the T2 law corresponding to a Fermi liquid system. A temperature driven MIT is induced in SVO ultrathin films with thicknesses below 6.5 nm. The transition temperature TMIT is at 50 K for the 6.5 nm film, 120 K for the 5.7 nm film and 205 K for the 3 nm film. The emergence of the observed MIT can be attributed to the dimensional crossover from a three‐dimensional metal to a two‐dimensional Mott insulator, as the resulting reduction in the effective bandwidth W opens a band gap at the Fermi level. The magneto‐transport study of the SVO ultrathin films also confirm the observed MIT is due to the electron‐electron interactions other than disorder‐induced localization.
- 6 June 2014
- Published by Wiley in Advanced Materials Interfaces
- Vol. 1 (7) , 1300126
Two‐Dimensional Mott Insulators in SrVO3 Ultrathin Films
Strongly correlated oxides that undergo a metal‐insulator transition (MIT) are a subject of great current interest for their potential application to future electronics as switches and sensors. Recent advances in thin film technology have opened up new avenues to tailor MIT for novel devices beyond conventional CMOS scaling. Here, dimensional‐crossover‐driven MITs are demonstrated in high‐quality epitaxial SrVO3 (SVO) thin films grown by a pulsed electron‐beam deposition technique. Thick SVO films (∼25 nm) exhibit metallic behavior with the electrical resistivity following the T2 law corresponding to a Fermi liquid system. A temperature driven MIT is induced in SVO ultrathin films with thicknesses below 6.5 nm. The transition temperature TMIT is at 50 K for the 6.5 nm film, 120 K for the 5.7 nm film and 205 K for the 3 nm film. The emergence of the observed MIT can be attributed to the dimensional crossover from a three‐dimensional metal to a two‐dimensional Mott insulator, as the resulting reduction in the effective bandwidth W opens a band gap at the Fermi level. The magneto‐transport study of the SVO ultrathin films also confirm the observed MIT is due to the electron‐electron interactions other than disorder‐induced localization.
- Open Access
Metal-insulator transition induced in SrTi_{1-x}V_xO_3 thin films
Epitaxial SrTi1-xVxO3 thin films with thicknesses of ~16 nm were grown on (001)-oriented LSAT substrates using the pulsed electron-beam deposition technique. The transport study revealed a temperature driven metal-insulator transition (MIT) at 95 K for the film with x = 0.67. The films with higher vanadium concentration (x > 0.67) were metallic, and the electrical resistivity followed the T^2 law corresponding to a Fermi liquid system. In the insulating region of x < 0.67, the temperature dependence of electrical resistivity for the x = 0.5 and 0.33 films can be scaled with the variable range hopping model. The possible mechanisms behind the observed MIT were discussed, including the effects of electron correlation, lattice distortion and Anderson localization.
Open AccessMetal-insulator transition induced in SrTi_{1-x}V_xO_3 thin films
Epitaxial SrTi1-xVxO3 thin films with thicknesses of ~16 nm were grown on (001)-oriented LSAT substrates using the pulsed electron-beam deposition technique. The transport study revealed a temperature driven metal-insulator transition (MIT) at 95 K for the film with x = 0.67. The films with higher vanadium concentration (x > 0.67) were metallic, and the electrical resistivity followed the T^2 law corresponding to a Fermi liquid system. In the insulating region of x < 0.67, the temperature dependence of electrical resistivity for the x = 0.5 and 0.33 films can be scaled with the variable range hopping model. The possible mechanisms behind the observed MIT were discussed, including the effects of electron correlation, lattice distortion and Anderson localization.
- Open Access
Dimensional-Crossover-Driven Mott Insulators in SrVO3 Ultrathin Films
High-quality epitaxial SrVO3 (SVO) thin films of various thicknesses were grown on (001)-oriented LSAT substrates by pulsed electron-beam deposition technique. Thick SVO films (~25 nm) exhibited metallic behavior with the electrical resistivity following the T2 law corresponding to a Fermi liquid system. We observed a temperature driven metal-insulator transition (MIT) in SVO ultrathin films with thicknesses below 6.5 nm, the transition temperature TMIT was found to be at 50 K for the 6.5 nm film, 120 K for the 5.7 nm film and 205 K for the 3 nm film. The emergence of the observed MIT can be attributed to the dimensional crossover from a three-dimensional metal to a two-dimensional Mott insulator, as the resulting reduction in the effective bandwidth W opens a band gap at the Fermi level. The magneto-transport study of the SVO ultrathin films also confirmed the observed MIT is due to the electron-electron interactions other than localization.
Open AccessDimensional-Crossover-Driven Mott Insulators in SrVO3 Ultrathin Films
High-quality epitaxial SrVO3 (SVO) thin films of various thicknesses were grown on (001)-oriented LSAT substrates by pulsed electron-beam deposition technique. Thick SVO films (~25 nm) exhibited metallic behavior with the electrical resistivity following the T2 law corresponding to a Fermi liquid system. We observed a temperature driven metal-insulator transition (MIT) in SVO ultrathin films with thicknesses below 6.5 nm, the transition temperature TMIT was found to be at 50 K for the 6.5 nm film, 120 K for the 5.7 nm film and 205 K for the 3 nm film. The emergence of the observed MIT can be attributed to the dimensional crossover from a three-dimensional metal to a two-dimensional Mott insulator, as the resulting reduction in the effective bandwidth W opens a band gap at the Fermi level. The magneto-transport study of the SVO ultrathin films also confirmed the observed MIT is due to the electron-electron interactions other than localization.
- Open Access
Strain-induced enhancement of coercivity in amorphous TbFeCo films
We report a strong size dependence of coercivity in amorphous ferrimagnetic TbFeCo films. The as-deposited film exhibited a low saturation magnetization (Ms=100 emu/cc) and a high perpendicular anisotropy (Ku=10^6 erg/cc). Hall-bar devices were fabricated for characterizing the magneto-transport behaviors. A significant increase in coercivity (up to 300 %) was observed at room temperature as the width of Hall bar was reduced. The large coercivity enhancement was attributed to the relaxation of film stress. The effect of strain and dimensionality on the coercivity in TbFeCo makes it attractive for tunable coercivity and the magnetization reversal in future nanoscale devices.
Open AccessStrain-induced enhancement of coercivity in amorphous TbFeCo films
We report a strong size dependence of coercivity in amorphous ferrimagnetic TbFeCo films. The as-deposited film exhibited a low saturation magnetization (Ms=100 emu/cc) and a high perpendicular anisotropy (Ku=10^6 erg/cc). Hall-bar devices were fabricated for characterizing the magneto-transport behaviors. A significant increase in coercivity (up to 300 %) was observed at room temperature as the width of Hall bar was reduced. The large coercivity enhancement was attributed to the relaxation of film stress. The effect of strain and dimensionality on the coercivity in TbFeCo makes it attractive for tunable coercivity and the magnetization reversal in future nanoscale devices.