ALArthur W. Lichtenberger

Arthur W. Lichtenberger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Arthur W. Lichtenberger has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Electronic Calibration for Submillimeter-Wave On-Wafer Scattering Parameter Measurements Using Schottky Diodes

    by Linli Xie, Matthew F. Bauwens, Souheil Nadri, Alexander Arsenovic, Michael E. Cyberey, Arthur W. Lichtenberger, Nicholas Scott Barker, Robert M. Weikle, Bobby Weikle

    A proof-of-concept demonstration of on-wafer electronic calibration in the submillimeter-wave band (325—500 GHz) is presented. A GaAs Schottky diode shunting a coplanar transmission line is employed as an electronic standard that is tuned by bias applied through wafer probes. Error-corrected scattering parameter measurements, based on a Thru-Reflect-Line (TRL) calibration are used to characterize the on-wafer diode and establish it as a standard for electronic calibration. Subsequently, ensembles of measurements from a multiline TRL calibration and the diode calibration standard are performed and compared to assess the uncertainty associated with the two approaches. It is found that the error coefficients estimated using the electronic standard are in good agreement with those found from the multiline TRL calibration. Moreover, the electronic standard exhibits a significant reduction in uncertainty compared with the TRL standards, consistent with previous work showing that error in probe placement between measurements was a principle source of uncertainty for TRL-based calibration.


  • Optical Spectroscopic Study of AlN-Based SIS Devices Grown by Inductively Coupled Plasma

    by Tannaz Farrahi, Michael Cyberey, Michael B. Eller, Jian Z. Zhang, Jie Wang, Robert M. Weikle, Arthur W. Lichtenberger

    High quality Nb-based superconductor-insulator- superconductor (SIS) junctions with aluminum oxide tunnel barriers grown from Al overlayers are broadly reported in the literature. However, as the current density increases, aluminum oxide tunnel barriers yield significant leakage current due to the pinholes and defects in the tunnel barrier. In this work, the growth dynamics of AlN are studied through the inductively coupled plasma (ICP) nitridation of an Al overlayer at an increased sample to ICP distance with the modification of the university of Virginia (UVA) trilayer deposition system. The new ICP geometry follows the previous UVA optical spectroscopy investigation of the plasma at the wafer, but now also allows spectroscopy measurement in the vicinity of the ICP source via an additional quartz window. We report a significantly slower nitridation growth rate, while maintaining the relative dissociation (RD), at the larger growth distance. High quality, low leakage SIS I(V) characteristics with current densities exceeding 30 kA/cm2 and better control of RnA are obtained.


  • Growth and Characterization of NbTiN Films Synthesized by Reactive Bias Target Ion Beam Deposition (RBTIBD)

    by Michael E. Cyberey, Tannaz Farrahi, Michael B. Eller, Jiwei Lu, Robert M. Weikle, Omid Noroozian, Arthur W. Lichtenberger

    High energy gap Nb-based superconducting alloys with low normal state resistivity are fundamentally important for realization of low-loss high frequency circuits operating above the typical ~670 GHz gap frequency of elemental Nb. NbTiN has been shown to have a superconducting energy gap nearly twice that of elemental Nb, and is emerging as an important material for various detector and superconducting computing technologies. In this study, we report on the growth of high-quality face-centered cubic (FCC) NbTiN films through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD). This novel technique offers more degrees of freedom compared to conventional sputtering, notably through decoupling the plasma generation and target bias, through use of a hollow-cathode ion source and independently pulse biased sputtering targets. The reported films are of high quality, with increased transition temperatures, and reduced normal state resistivity and surface roughness, compared to our previously reported reactive magnetron sputtered NbTiN films. In particular, at UVA, we are investigating these NbTiN films for widebandgap all NbTiN superconducting-insulating-superconducting (SIS) mixers, kinetic inductance detectors (KID), and traveling-wave kinetic inductance parametric amplifier (TKIP) devices.


  • NbTiN/AlN/NbTiN SIS Junctions Realized by Reactive Bias Target Ion Beam Deposition

    by Michael E. Cyberey, Tannaz Farrahi, Jiwei Lu, Anthony R. Kerr, Robert M. Weikle, Arthur W. Lichtenberger

    The current state-of-the-art approach for SIS junction fabrication is based on magnetron sputtering and the Gurvitch Al overlayer trilayer process where an Al overlayer is deposited onto the Nb base electrode in order to subsequently grow a critical ~1 nm AlOx or AlN tunnel barrier. While the switch from AlOx to AlN barriers has significantly increased the achievable critical current density, and significant research has been performed to understand and optimize ICP AlN growth, the use of Nb electrodes provides an upper limit to the frequency range for low-noise operation when employed in THz mixer applications, and has lead to the study and use of alternative materials with higher transition temperatures (Tc) such as NbN and NbTiN. The Nb electrodes also impose stringent cooling requirements, replacement of both electrodes with higher Tc materials can increase the required device operating temperature to 10 K, thus reducing the power consumption of the refrigeration system, a building block for the realization of more energy efficient superconducting computing systems, such as those based on single-flux-quantum (SFQ) logic [6], [7], [8], [9]. In this work, we have departed from conventional SIS material growth techniques through the use of an alternative materials deposition technology - Reactive Bias Target Ion Beam Deposition (RBTIBD) - that offers unique capabilities to tailor materials and interfaces. Using RBTIBD technology, we have realized the first ever NbTiN/AlN/NbTiN SIS junctions with highest yet reported sum-gap voltages exceeding 5.0 mV, potentially extending the theoretical limit of low-loss SIS mixing applications beyond 1.2 THz and relaxing the cooling requirements for superconducting device applications.


  • A Programmable Cryogenic Waveguide Calibration Load With Exceptional Temporal Response and Linearity

    by Jacob W. Kooi, Rodrigo A. Reeves, Arthur W. Lichtenberger, Theodore J. Reck, Andy K. Fung, Sander Weinreb, James. W. Lamb, Rohit S. Gawande, Kieran. A. Cleary, Goutam Chattopadhyay

    We have developed a programmable, fast switching, accurate, and miniaturized calibration load for use in millimeter and submillimeter low-noise amplifier characterization, and Earth/planetary science radiometers. The proposed solution uses a thermally conductive waveguide vane attenuator with low thermal mass, integrated heater, and silicon thermometer. In the present design, we utilize a 125-$\mu$m-thick z-cut crystal quartz vane due to its low dielectric constant (relative to silicon), high cryogenic thermal conductivity, chemical robustness, and small thermal contraction. To provide adequate attenuation, the bottom side of the quartz fabrication wafer has an nm thick resistive Ti metal layer deposited. On the top of the quartz wafer, a pattern of Au is deposited to allow adhesion of the heater resistor, thermometer, and internal heat strap. The z-cut quartz vane is mounted on three low thermally conductive Torlon posts, centered on the maximum E-field, and positioned across the waveguide. With this approach the quartz vane, protruding all the way into the waveguide, approximates a blackbody with a physical temperature T. The design uniqueness lies in the choice of cryogenically suitable materials coupled with detailed thermal analyses and proper miniaturization. When operated in a proportional$-$integral$-$derivative loop, these properties combine to facilitate a programmable calibration load with a switching speed of $\lesssim$10 s. It will be shown that the W-band design operates overmoded to $\sim$230 GHz and that the concept is in principle scalable to terahertz frequencies.


  • Open Access

    Development of the ALMA-North America Sideband-Separating SIS Mixers

    by Anthony R. Kerr, Shing-Kuo Pan, Stéphane M. X. Claude, Philip Dindo, Arthur W. Lichtenberger, Eugene F. Lauria

    As the Atacama Large Millimeter/submillimeter Array (ALMA) nears completion, 73 dual-polarization receivers have been delivered for each of Bands 3 (84-116 GHz) and 6 (211-275 GHz). The receivers use sideband-separating superconducting Nb/Al-AlOx/Nb tunnel-junction (SIS) mixers, developed for ALMA to suppress atmospheric noise in the image band. The mixers were designed taking into account dynamic range, input return loss, and signal-to-image conversion (which can be significant in SIS mixers). Typical SSB receiver noise temperatures in Bands 3 and 6 are 30 K and 60 K, resp., and the image rejection is typically 15 dB.