Dmitri Kirichenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dmitri Kirichenko has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Anubhav Sahu
HYPRES, Inc., Elmsford, NY, USA
3 shared publications - Deepnarayan Gupta
Digital-RF Circuits and Systems, Hypres, 338480 Elmsford, New York, United States
3 shared publications - Andrei Talalaevskii
Digital-RF Circuits & Systems, Hypres, 338480 Elmsford, New York, United States
2 shared publications - Mustafa Eren Celik
HYPRES, Inc., Elmsford, NY, USA
2 shared publications - Mustapha Habib
HYPRES Inc., Elmsford, NY, USA
2 shared publications - Timur V. Filippov
HYPRES, Inc., Elmsford, NY, USA
2 shared publications
Latest Publications
- 11 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-5
25-GHz Operation of ERSFQ Time-to-Digital Converter
Fast time-to-digital converters (TDCs), used to convert a continuous time interval into discrete number for further processing, serve diverse applications ranging from photon/particle detectors to communication systems employing delay-encoded pulses. Being a multi-rate digital circuit, the TDC is also a good candidate to explore operation of Energy-Efficient Rapid Single Flux Quantum (ERSFQ) circuits at high (>10 GHz) clock frequency. We de-signed a TDC using ERSFQ cells, targeting the 10-kA/cm2 SFQ5ee fabrication process at MIT Lincoln Laboratory. The main elements of the circuit comprise a 9-bit binary ripple counter and a parallel-to-serial converter. A frequency divider and a pulse distribution network with a decision-making element are designed to control the operation. The ERSFQ TDC was operated up to 25 GHz clock frequency (40 ps time resolution) and with a power consumption of around 14 W for all ERSFQ components. The design specifications such as number of junctions and area will be discussed together with the power delivery technique involving an over-pumped feeding Josephson transmission line (JTL).
- 11 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-5
25-GHz Operation of ERSFQ Time-to-Digital Converter
Fast time-to-digital converters (TDCs), used to convert a continuous time interval into discrete number for further processing, serve diverse applications ranging from photon/particle detectors to communication systems employing delay-encoded pulses. Being a multi-rate digital circuit, the TDC is also a good candidate to explore operation of Energy-Efficient Rapid Single Flux Quantum (ERSFQ) circuits at high (>10 GHz) clock frequency. We de-signed a TDC using ERSFQ cells, targeting the 10-kA/cm2 SFQ5ee fabrication process at MIT Lincoln Laboratory. The main elements of the circuit comprise a 9-bit binary ripple counter and a parallel-to-serial converter. A frequency divider and a pulse distribution network with a decision-making element are designed to control the operation. The ERSFQ TDC was operated up to 25 GHz clock frequency (40 ps time resolution) and with a power consumption of around 14 W for all ERSFQ components. The design specifications such as number of junctions and area will be discussed together with the power delivery technique involving an over-pumped feeding Josephson transmission line (JTL).
- 26 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-6
Optimization of Passive Transmission Lines for Single Flux Quantum Circuits
Passive transmission lines (PTLs) provide an energy-efficient means of transporting pulsed single flux quantum (SFQ) signals between logic gates and blocks on a chip, or even between chips through a multi-chip module carrier. Although functional up to 70 GHz, our previous designs manifested sharp, length-dependent resonances resulting in diminished operating margins. These are particularly inconvenient since the resonant length is about 1 mm at 40–50 GHz, where most SFQ circuits currently function. To avoid the need to keep the PTLs < 1 mm in length, we have optimized the PTL driver-receiver pairs to sufficiently suppress these resonances; this helps facilitate the use of automated routing tools. We present experimental results, in the 10-70 GHz frequency range, for different driver-receiver pairs designed for PTLs in our dual RSFQ-ERSFQ cell library. This cell library, targeting MIT Lincoln Laboratory's SFQ5ee fabrication process, uses PTLs with two types of ground plane configuration. The first variant has signal in M1 and/or M3 with symmetrical ground planes in M0, M2 and/or M2, M4 respectively. The second variant has signal in M2 and/or M3 with asymmetrical ground planes in M1 and M4. We also present a comparison with wider, 4 Ω, PTLs that are more suitable for transport between distant logic blocks. Next, we present experimental results of PTL lengths ranging from 1.2-12 mm over the same 10-70 GHz frequency range. Finally, we report on the design of circuits for investigating crosstalk between two PTLs and their measurement results.
- 26 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-6
Optimization of Passive Transmission Lines for Single Flux Quantum Circuits
Passive transmission lines (PTLs) provide an energy-efficient means of transporting pulsed single flux quantum (SFQ) signals between logic gates and blocks on a chip, or even between chips through a multi-chip module carrier. Although functional up to 70 GHz, our previous designs manifested sharp, length-dependent resonances resulting in diminished operating margins. These are particularly inconvenient since the resonant length is about 1 mm at 40–50 GHz, where most SFQ circuits currently function. To avoid the need to keep the PTLs < 1 mm in length, we have optimized the PTL driver-receiver pairs to sufficiently suppress these resonances; this helps facilitate the use of automated routing tools. We present experimental results, in the 10-70 GHz frequency range, for different driver-receiver pairs designed for PTLs in our dual RSFQ-ERSFQ cell library. This cell library, targeting MIT Lincoln Laboratory's SFQ5ee fabrication process, uses PTLs with two types of ground plane configuration. The first variant has signal in M1 and/or M3 with symmetrical ground planes in M0, M2 and/or M2, M4 respectively. The second variant has signal in M2 and/or M3 with asymmetrical ground planes in M1 and M4. We also present a comparison with wider, 4 Ω, PTLs that are more suitable for transport between distant logic blocks. Next, we present experimental results of PTL lengths ranging from 1.2-12 mm over the same 10-70 GHz frequency range. Finally, we report on the design of circuits for investigating crosstalk between two PTLs and their measurement results.
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (7) , 1-4
Fast RSFQ and ERSFQ Parallel Counters
Historically one of the most challenging high-speed RSFQ circuits to implement has been a parallel counter that sums a set of un-weighted inputs and produces a binary-weighted word at the same clock rate. A 7-to-3 parallel counter that sums 7 inputs has been designed and tested at the target clock frequency of 40 GHz and at frequencies up to 50 GHz using its own dedicated testbed. Yielded in both 10- and 20-kA/cm2 current densities using MIT Lincoln Laboratory's foundry, this 7-to-3 summing circuit has become a digital circuit benchmark. Most recently, a version with 15 parallel inputs producing a 4-bit output at the same target frequency was designed by combining two variants of 8-to-4 parallel counters. The first variant based on the 7-to-3 parallel counter, sums 8 unweighted inputs whereas the second variant sums two 4-bit binary-weighted words by pairwise summing of bits of equal weights. Design considerations for scaling this circuit will be discussed together with the circuit performance and yield.
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (7) , 1-4
Fast RSFQ and ERSFQ Parallel Counters
Historically one of the most challenging high-speed RSFQ circuits to implement has been a parallel counter that sums a set of un-weighted inputs and produces a binary-weighted word at the same clock rate. A 7-to-3 parallel counter that sums 7 inputs has been designed and tested at the target clock frequency of 40 GHz and at frequencies up to 50 GHz using its own dedicated testbed. Yielded in both 10- and 20-kA/cm2 current densities using MIT Lincoln Laboratory's foundry, this 7-to-3 summing circuit has become a digital circuit benchmark. Most recently, a version with 15 parallel inputs producing a 4-bit output at the same target frequency was designed by combining two variants of 8-to-4 parallel counters. The first variant based on the 7-to-3 parallel counter, sums 8 unweighted inputs whereas the second variant sums two 4-bit binary-weighted words by pairwise summing of bits of equal weights. Design considerations for scaling this circuit will be discussed together with the circuit performance and yield.