Xumeng Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xumeng Liu has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Chao Li
Peng Cheng Laboratory (PCL), Shenzhen, China
8 shared publications - Zhixue He
Peng Cheng Laboratory (PCL), Shenzhen, China
8 shared publications - Peng Sun
Peng Cheng Laboratory (PCL), Shenzhen, China
7 shared publications - Songyuan Hu
Peng Cheng Laboratory (PCL), Shenzhen, Guangdong, China
6 shared publications Ji Wang
Pengcheng Laboratory
5 shared publicationsShupeng Li
Pengcheng Laboratory
5 shared publications
Latest Publications
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 936-939
C-Band 4λ 960-Gb/s PAM4 Transmission Over AR-HCF Enabled by Multi-Task Learning
A neural network equalizer based on multi-task learning is proposed, which achieves resource efficiency through shared network parameters while enhancing system performance by leveraging inter-wavelength channel correlations. The scheme includes a signal preprocessing unit and a main multi-task learning (MTL) network to achieve architectural decoupling between linear compensation and nonlinear feature learning. A C-band 960 Gb/s (240 Gb/s/λ × 4λ) PAM4 WDM IM/DD transmission system was experimentally constructed using four independent lasers over 1.4 km anti-resonant hollow-core fiber (AR-HCF). Experimental results demonstrate the proposed MTL equalizer consistently outperforms single-task equalizers across the tested channels while reducing parameter count by approximately 57%, significantly improving both equalization performance and computational efficiency.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 936-939
C-Band 4λ 960-Gb/s PAM4 Transmission Over AR-HCF Enabled by Multi-Task Learning
A neural network equalizer based on multi-task learning is proposed, which achieves resource efficiency through shared network parameters while enhancing system performance by leveraging inter-wavelength channel correlations. The scheme includes a signal preprocessing unit and a main multi-task learning (MTL) network to achieve architectural decoupling between linear compensation and nonlinear feature learning. A C-band 960 Gb/s (240 Gb/s/λ × 4λ) PAM4 WDM IM/DD transmission system was experimentally constructed using four independent lasers over 1.4 km anti-resonant hollow-core fiber (AR-HCF). Experimental results demonstrate the proposed MTL equalizer consistently outperforms single-task equalizers across the tested channels while reducing parameter count by approximately 57%, significantly improving both equalization performance and computational efficiency.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 920-923
O-, S-, C-, and L-Band 4λ 960-Gb/s PAM8 Transmission Over 6.2-km AR-HCF With Linear FFE Only
Anti-resonant hollow-core fiber (AR-HCF) has exhibited the revolutionary potential in wide-spectrum optical transmission. We propose and demonstrate the co-transmission of O, S, C, L-band signals in a single AR-HCF. Enabled by 80Gbaud PAM8 modulated four independent tunable lasers in O, S, C, L-bands and linear equalizers, we achieve the 960Gb/s (240Gb/s/λ × 4 λ) optical interconnect over 6.2km AR-HCF at 20% FEC limit of 2.4 × 10-2. By adjusting the laser wavelengths, the measured useful bandwidths within the 20% FEC limit are 35nm, 35nm, 30nm and 20nm in O, S, C, L-bands, respectively, which provides an upgrade solution to achieve high-capacity optical interconnects with 200Gb/s/λ and beyond.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 920-923
O-, S-, C-, and L-Band 4λ 960-Gb/s PAM8 Transmission Over 6.2-km AR-HCF With Linear FFE Only
Anti-resonant hollow-core fiber (AR-HCF) has exhibited the revolutionary potential in wide-spectrum optical transmission. We propose and demonstrate the co-transmission of O, S, C, L-band signals in a single AR-HCF. Enabled by 80Gbaud PAM8 modulated four independent tunable lasers in O, S, C, L-bands and linear equalizers, we achieve the 960Gb/s (240Gb/s/λ × 4 λ) optical interconnect over 6.2km AR-HCF at 20% FEC limit of 2.4 × 10-2. By adjusting the laser wavelengths, the measured useful bandwidths within the 20% FEC limit are 35nm, 35nm, 30nm and 20nm in O, S, C, L-bands, respectively, which provides an upgrade solution to achieve high-capacity optical interconnects with 200Gb/s/λ and beyond.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 892-895
20.8 Tbit/s C+L-Band DWDM IM/DD Transmission Over Nested Anti-Resonant Nodeless Fiber Link
We experimentally demonstrate, for the first time, a 20.8 Tbit/s intensity modulation/direct detection (IM/DD) optical interconnect supported by the dense wavelength division multiplexing (DWDM) technique over 1.4 km low chromatic dispersion nested anti-resonant nodeless fiber (NANF). Covering 9.6 THz in C+L-band, 96 wavelength channels are used to carry 80 GBaud probabilistic constellation shaping (PCS) pulse amplitude modulation (PAM) 8, thereby achieving a rate of > 200 Gbit/s/λ. The measured results indicate the presence of a significant potential for C+L-Band DWDM IM/DD transmission over NANF link to intra-data-center interconnects (intra-DCIs).
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 892-895
20.8 Tbit/s C+L-Band DWDM IM/DD Transmission Over Nested Anti-Resonant Nodeless Fiber Link
We experimentally demonstrate, for the first time, a 20.8 Tbit/s intensity modulation/direct detection (IM/DD) optical interconnect supported by the dense wavelength division multiplexing (DWDM) technique over 1.4 km low chromatic dispersion nested anti-resonant nodeless fiber (NANF). Covering 9.6 THz in C+L-band, 96 wavelength channels are used to carry 80 GBaud probabilistic constellation shaping (PCS) pulse amplitude modulation (PAM) 8, thereby achieving a rate of > 200 Gbit/s/λ. The measured results indicate the presence of a significant potential for C+L-Band DWDM IM/DD transmission over NANF link to intra-data-center interconnects (intra-DCIs).
- 15 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (15) , 1082-1085
WDM 100G-PON Over C-Band 20~50 km SSMF With Linear Equalizer and 44 dB Power Budget
We experimentally demonstrate a 400G C-band wavelength division multiplexing passive optical network (WDM-PON) system, utilizing four channels over standard single-mode fiber (SSMF). Each channel carries a 100 Gbaud OOK signal and is successfully transmitted over 20 km to 50 km of SSMF, all within the 12.5% soft-decision forward error correction (SD-FEC) threshold of 1.0×10⁻2. This achievement is enabled by a combination of optically filtered comb sideband modulation and a linear equalizer. The sideband modulation technique renders the system highly robust against both fiber dispersion and nonlinearities, thereby significantly improving the optical power budget, which is experimentally verified to reach 44 dB at 50 km reach. These results establish a promising pathway for building scalable, flexible, and high-capacity PON systems in a cost-effective manner.
- 15 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (15) , 1082-1085
WDM 100G-PON Over C-Band 20~50 km SSMF With Linear Equalizer and 44 dB Power Budget
We experimentally demonstrate a 400G C-band wavelength division multiplexing passive optical network (WDM-PON) system, utilizing four channels over standard single-mode fiber (SSMF). Each channel carries a 100 Gbaud OOK signal and is successfully transmitted over 20 km to 50 km of SSMF, all within the 12.5% soft-decision forward error correction (SD-FEC) threshold of 1.0×10⁻2. This achievement is enabled by a combination of optically filtered comb sideband modulation and a linear equalizer. The sideband modulation technique renders the system highly robust against both fiber dispersion and nonlinearities, thereby significantly improving the optical power budget, which is experimentally verified to reach 44 dB at 50 km reach. These results establish a promising pathway for building scalable, flexible, and high-capacity PON systems in a cost-effective manner.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (15) , 1066-1069
MIMO-Free WDM/MDM Optical Wireless System With 120-GBaud PAM4 and Linear Equalization
A free-space multi-plane light conversion module is employed for MIMO-free mode division multiplexing, achieving inter-mode crosstalk lower than -21.2 dB and insertion loss below 11.5 dB across the entire C-band. A net 5.4 Tb/s (240 Gb/s/λ × 8λ × 3 modes) PAM4 WDM-MDM IM/DD transmission system is experimentally demonstrated over a 1.8-m free-space link. All spatial and wavelength channels achieve Q-factors above the 6.7% HD-FEC threshold using only a 217-tap linear feed-forward equalizer, eliminating the need for complex MIMO digital signal processing. To the best of our knowledge, this represents the first demonstration of MIMO-free MDM transmission at baud rates exceeding 100 GBaud.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (15) , 1066-1069
MIMO-Free WDM/MDM Optical Wireless System With 120-GBaud PAM4 and Linear Equalization
A free-space multi-plane light conversion module is employed for MIMO-free mode division multiplexing, achieving inter-mode crosstalk lower than -21.2 dB and insertion loss below 11.5 dB across the entire C-band. A net 5.4 Tb/s (240 Gb/s/λ × 8λ × 3 modes) PAM4 WDM-MDM IM/DD transmission system is experimentally demonstrated over a 1.8-m free-space link. All spatial and wavelength channels achieve Q-factors above the 6.7% HD-FEC threshold using only a 217-tap linear feed-forward equalizer, eliminating the need for complex MIMO digital signal processing. To the best of our knowledge, this represents the first demonstration of MIMO-free MDM transmission at baud rates exceeding 100 GBaud.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1125-1132
Real-Time 204 Tb/s Optical Wireless Connectivity Enabled by WDM/MDM and 800G Optical Modules
The combination of wavelength division multiplexing (WDM) and mode division multiplexing (MDM) is a promising route to drastically increase the capacity of optical wireless communication (OWC). However, the development of mode multiplexers/demultiplexers (MUXs/DeMUXs) that concurrently deliver low insertion loss and low inter-mode crosstalk over a wide optical band remains challenging. Moreover, while 800G coherent optical modules are commercially available, their use in ultra-high-capacity OWC systems lacks experimental validation. To address these issues, this work presents an integrated solution employing a novel multi-channel, MIMO-free spatial mode MUX/DeMUX based on multi-plane light conversion (MPLC) alongside commercial 800G coherent transponders for ultra-high capacity OWC system. This setup enables the first demonstration of a real-time OWC system with a net data rate of 204 Tb/s. The implemented mode MUX/DeMUX exhibits >27.91 dB isolation and power losses below 18.91 dB (C6T-band) and 18.71 dB (L6T-band), enabling MIMO-free operation. These results provide critical insights for future ultra-high-capacity OWC systems.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1125-1132
Real-Time 204 Tb/s Optical Wireless Connectivity Enabled by WDM/MDM and 800G Optical Modules
The combination of wavelength division multiplexing (WDM) and mode division multiplexing (MDM) is a promising route to drastically increase the capacity of optical wireless communication (OWC). However, the development of mode multiplexers/demultiplexers (MUXs/DeMUXs) that concurrently deliver low insertion loss and low inter-mode crosstalk over a wide optical band remains challenging. Moreover, while 800G coherent optical modules are commercially available, their use in ultra-high-capacity OWC systems lacks experimental validation. To address these issues, this work presents an integrated solution employing a novel multi-channel, MIMO-free spatial mode MUX/DeMUX based on multi-plane light conversion (MPLC) alongside commercial 800G coherent transponders for ultra-high capacity OWC system. This setup enables the first demonstration of a real-time OWC system with a net data rate of 204 Tb/s. The implemented mode MUX/DeMUX exhibits >27.91 dB isolation and power losses below 18.91 dB (C6T-band) and 18.71 dB (L6T-band), enabling MIMO-free operation. These results provide critical insights for future ultra-high-capacity OWC systems.
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (15) , 1054-1057
Flexible Optical Interconnects in O-Band With 360 Gb/s Peak Rate and Linear Equalization
We experimentally demonstrate a flexible optical interconnect in O-band by using intensity modulation and direct detection (IM/DD) with probabilistically shaped eight-level pulse amplitude modulation (PS-PAM8) at 125 GBaud for 20 km-50 km reach application. With the aid of a semiconductor optical amplifier (SOA) and low-complexity linear equalization, a peak line rate of 360 Gb/s is successfully achieved. Considering 12.5% FEC limit of 1 × 10−2, the demonstrated system delivers a net throughput of 320 Gb/s. To the best of our knowledge, this is the first O-band demonstration of PS-PAM8 based flexible optical interconnects achieving beyond-300 Gb/s with only linear equalization over 20 km, highlighting their potential for cost- and power-efficient intra-data center applications.
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (15) , 1054-1057
Flexible Optical Interconnects in O-Band With 360 Gb/s Peak Rate and Linear Equalization
We experimentally demonstrate a flexible optical interconnect in O-band by using intensity modulation and direct detection (IM/DD) with probabilistically shaped eight-level pulse amplitude modulation (PS-PAM8) at 125 GBaud for 20 km-50 km reach application. With the aid of a semiconductor optical amplifier (SOA) and low-complexity linear equalization, a peak line rate of 360 Gb/s is successfully achieved. Considering 12.5% FEC limit of 1 × 10−2, the demonstrated system delivers a net throughput of 320 Gb/s. To the best of our knowledge, this is the first O-band demonstration of PS-PAM8 based flexible optical interconnects achieving beyond-300 Gb/s with only linear equalization over 20 km, highlighting their potential for cost- and power-efficient intra-data center applications.
- 11 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (22) , 10264-10273
Ultrafast Polarization Stabilizer Based on ZigZag Algorithm in Nested Antiresonant Nodeless Fiber
An ultrafast polarization stabilizer with the ZigZag algorithm is proposed and demonstrated, which is firstly verified in the nested antiresonant nodeless fiber (NANF) transmission system with the multiple input multiple output free (MIMO-free) and chromatic dispersion (CD) compensation free digital signal processing (DSP). The proposed ZigZag algorithm, compared with the Particle Swarm Optimization (PSO) algorithm and the Jacobian Matrix Algorithm (JMA), achieves the lowest computational complexity and the best polarization demultiplexing performance. Additionally, the integration of the stabilizer with the ZigZag algorithm enables effective tracking of linear rotation of state of polarization (RSOP) changes up to 1 Mrad/s and Rayleigh distribution RSOP changes up to 10 krad/s, comparing with the PSO which only can track 5krad/s linear RSOP and 1krad/s Rayleigh distribution RSOP in both 60 Gbaud PDM-16QAM and 20 Gbaud PDM-64QAM 11.1 km NANF transmission systems. Moreover, our stablizer operates efficiently across the entire C+L band of the NANF system and can tolerate up to 5 ps of polarization mode dispersion (PMD). Further, the stabilizer continuously maintains stability in tracking 1 krad/s Rayleigh RSOP for 12 hours, as demonstrated by experimental results, suggesting its potential applicability in optical communication and sensing domains.
- 11 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (22) , 10264-10273
Ultrafast Polarization Stabilizer Based on ZigZag Algorithm in Nested Antiresonant Nodeless Fiber
An ultrafast polarization stabilizer with the ZigZag algorithm is proposed and demonstrated, which is firstly verified in the nested antiresonant nodeless fiber (NANF) transmission system with the multiple input multiple output free (MIMO-free) and chromatic dispersion (CD) compensation free digital signal processing (DSP). The proposed ZigZag algorithm, compared with the Particle Swarm Optimization (PSO) algorithm and the Jacobian Matrix Algorithm (JMA), achieves the lowest computational complexity and the best polarization demultiplexing performance. Additionally, the integration of the stabilizer with the ZigZag algorithm enables effective tracking of linear rotation of state of polarization (RSOP) changes up to 1 Mrad/s and Rayleigh distribution RSOP changes up to 10 krad/s, comparing with the PSO which only can track 5krad/s linear RSOP and 1krad/s Rayleigh distribution RSOP in both 60 Gbaud PDM-16QAM and 20 Gbaud PDM-64QAM 11.1 km NANF transmission systems. Moreover, our stablizer operates efficiently across the entire C+L band of the NANF system and can tolerate up to 5 ps of polarization mode dispersion (PMD). Further, the stabilizer continuously maintains stability in tracking 1 krad/s Rayleigh RSOP for 12 hours, as demonstrated by experimental results, suggesting its potential applicability in optical communication and sensing domains.
- 12 October 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (22) , 35971-35981
Adaptive dispersion compensation using a photonic integrated circuit finite impulse response filter
Optical equalization can be used for chromatic dispersion compensation in optical communication systems to improve the system performance; however, optical signal processing (OSP) is generally specifically designed for transmission channels, that is non-adaptive to dynamic transmission distortions compared with digital signal processing (DSP). In this contribution, we demonstrate optical equalization using a photonic integrated circuit (PIC) filter for chromatic dispersion compensation, with static and adaptive techniques: (a) the static optical equalizer is calibrated based on the known fiber dispersion and length, by using the fractional delay reference method; (b) the adaptive optical equalizer is updated iteratively to compensate transmission impairments based on a least-mean squares (LMS) algorithm. Experimental results show that both the static optical equalizer and the adaptive optical LMS equalizer can give an 18-dB Q-factor for a 14-Gbd QPSK signal transmitting over 30 km. To highlight the capability of the optical equalizers, we use simulations to show the improvement in dispersion compensating characteristics by implementing additional taps.
- 12 October 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (22) , 35971-35981
Adaptive dispersion compensation using a photonic integrated circuit finite impulse response filter
Optical equalization can be used for chromatic dispersion compensation in optical communication systems to improve the system performance; however, optical signal processing (OSP) is generally specifically designed for transmission channels, that is non-adaptive to dynamic transmission distortions compared with digital signal processing (DSP). In this contribution, we demonstrate optical equalization using a photonic integrated circuit (PIC) filter for chromatic dispersion compensation, with static and adaptive techniques: (a) the static optical equalizer is calibrated based on the known fiber dispersion and length, by using the fractional delay reference method; (b) the adaptive optical equalizer is updated iteratively to compensate transmission impairments based on a least-mean squares (LMS) algorithm. Experimental results show that both the static optical equalizer and the adaptive optical LMS equalizer can give an 18-dB Q-factor for a 14-Gbd QPSK signal transmitting over 30 km. To highlight the capability of the optical equalizers, we use simulations to show the improvement in dispersion compensating characteristics by implementing additional taps.
- Open Access
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (6) , 1775-1783
‘Dial up’ Photonic Integrated Circuit Filter
Photonic integrated circuits (PICs) are capable of providing advanced signal processing functions in small footprints; however, their operation is affected by fabrication tolerances in addition to dynamically changing thermal and acoustic effects. Thus, it can be difficult to tune PICs to accurately implement desired functionality, even those with a relatively small number of photonic components (e.g. 10). In this contribution, we demonstrate a ‘dial-up’ PIC filter that can accurately and reliably implement a wide range of filter functions. It uses an on-chip optical reference path, which allows the phase and amplitude of each tap in a finite impulse response (FIR) filter to be individually determined. The fractional delay of the reference path is chosen to be half the delay between the FIR filter's taps, which upon Fourier transformation enables us to uniquely identify the phase and amplitude of each tap in the FIR filter. This information is used in an independent feedback algorithm to control each tap to ensure that a desired (‘dialed-up’) response is accurately implemented. To demonstrate the flexibility of the method, we experimentally demonstrate functions of a sinc-shaped filter with a phase step, a Hilbert transform and low- and high-pass filters.
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (6) , 1775-1783
Open Access‘Dial up’ Photonic Integrated Circuit Filter
Photonic integrated circuits (PICs) are capable of providing advanced signal processing functions in small footprints; however, their operation is affected by fabrication tolerances in addition to dynamically changing thermal and acoustic effects. Thus, it can be difficult to tune PICs to accurately implement desired functionality, even those with a relatively small number of photonic components (e.g. 10). In this contribution, we demonstrate a ‘dial-up’ PIC filter that can accurately and reliably implement a wide range of filter functions. It uses an on-chip optical reference path, which allows the phase and amplitude of each tap in a finite impulse response (FIR) filter to be individually determined. The fractional delay of the reference path is chosen to be half the delay between the FIR filter's taps, which upon Fourier transformation enables us to uniquely identify the phase and amplitude of each tap in the FIR filter. This information is used in an independent feedback algorithm to control each tap to ensure that a desired (‘dialed-up’) response is accurately implemented. To demonstrate the flexibility of the method, we experimentally demonstrate functions of a sinc-shaped filter with a phase step, a Hilbert transform and low- and high-pass filters.