Feiyan Gong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Feiyan Gong has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Jiankun Liang
College of Civil Engineering, Kaili University, Kaili 556011, China
6 shared publications - Zhigang Wu
College of Forestry, Guizhou University, Guiyang 550025, China
6 shared publications - De Li
College of Forestry, Guizhou University, Guiyang 550025, China
5 shared publications - Xiao Zhong
College of Forestry, Guizhou University, Guiyang 550025, China
4 shared publications - Guifen Yang
College of Forestry, Guizhou University, Guiyang 550025, China
3 shared publications - Shuang Yin
College of Forestry, Guizhou University, Guiyang 550025, China
3 shared publications
Latest Publications
- Open Access
Improving the Strength of Eucalyptus Wood Joints Through Optimized Rotary Welding Conditions
Conventional wood connections rely on adhesives and metal fasteners, causing environmental concerns. Wood rotary welding offers an adhesive-free alternative. This study systematically investigated rotary welding of eucalyptus wood, evaluating process parameters’ effects on joint performance. Chemical and microstructural transformations at the welding interface were characterized using FT-IR, XPS, XRD, SEM, and TGA. Optimal parameters significantly enhanced connection strength compared to unwelded specimens. The welding process induced partial degradation of hemicellulose and cellulose, forming new chemical bonds and increasing carbonyl compounds. XRD revealed increased wood crystallinity, while SEM showed tighter interfaces with enhanced mechanical interlocking. TGA confirmed improved thermal stability at the welded interface. The findings demonstrate that rotary welding improves eucalyptus wood joint strength through combined chemical, thermal, and structural modifications, providing guidance for optimizing welding protocols in sustainable wood manufacturing.
Open AccessImproving the Strength of Eucalyptus Wood Joints Through Optimized Rotary Welding Conditions
Conventional wood connections rely on adhesives and metal fasteners, causing environmental concerns. Wood rotary welding offers an adhesive-free alternative. This study systematically investigated rotary welding of eucalyptus wood, evaluating process parameters’ effects on joint performance. Chemical and microstructural transformations at the welding interface were characterized using FT-IR, XPS, XRD, SEM, and TGA. Optimal parameters significantly enhanced connection strength compared to unwelded specimens. The welding process induced partial degradation of hemicellulose and cellulose, forming new chemical bonds and increasing carbonyl compounds. XRD revealed increased wood crystallinity, while SEM showed tighter interfaces with enhanced mechanical interlocking. TGA confirmed improved thermal stability at the welded interface. The findings demonstrate that rotary welding improves eucalyptus wood joint strength through combined chemical, thermal, and structural modifications, providing guidance for optimizing welding protocols in sustainable wood manufacturing.
- Open Access
Effects of Dowel Rotation Welding Conditions on Connection Performance for Chinese Fir Dimension Lumbers
In this study, the rotating welding process of Chinese fir (Keteleeriafortunei) in Guizhou, China, was systematically analyzed. The effects of rotating welding conditions, including the dowel-to-guide hole diameter ratio, welding time, depth, base surface, angle, and dowel type, on the performance of welded Chinese fir were explored. Moreover, the physical and chemical changes oftheChinese fir interface during welding were revealed by Fourier-Transform Infrared Spectroscopy (FT-IR), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). The results indicated the following: (1) The rotating welding technology can quickly achieve a strong connection between wood through friction heat without chemical adhesives and compared with traditional wood connection technology such as gluing or mechanical fixing;it has the advantages of simple operation, high production efficiency; and environmental friendliness. (2) Aftertherotating welding, the wood underwent significant pyrolysis, especially the degradation of hemicellulose. The heat generated in the welding process caused good melting and mechanical interlocking between the dowel and the wall of the guide hole, but it was also accompanied by afriction loss of the dowel and the substrate. (3) The welding parameters affected the wood’s connection strength and stability by altering heat production, distribution, transfer, and frictional losses. The impact of the dowel-to-guide hole diameter ratio had a great influence on the connection strength. When the diameter ratio was 1:0.7, the tensile strength was the highest, reaching 2.27 MPa. (4) The analyses of XPS, FTIR, XRD, and SEM proved thatthechemical composition changes at the interface, leading to a more structured crystalline bond and enhanced connection strength due to fiber entanglement and interlocking. This research providesatheoretical and experimental basis forthefurther innovation and development of wood processing technology and provides a new technical path forthegreen manufacturing of wood structure buildings.
Open AccessEffects of Dowel Rotation Welding Conditions on Connection Performance for Chinese Fir Dimension Lumbers
In this study, the rotating welding process of Chinese fir (Keteleeriafortunei) in Guizhou, China, was systematically analyzed. The effects of rotating welding conditions, including the dowel-to-guide hole diameter ratio, welding time, depth, base surface, angle, and dowel type, on the performance of welded Chinese fir were explored. Moreover, the physical and chemical changes oftheChinese fir interface during welding were revealed by Fourier-Transform Infrared Spectroscopy (FT-IR), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). The results indicated the following: (1) The rotating welding technology can quickly achieve a strong connection between wood through friction heat without chemical adhesives and compared with traditional wood connection technology such as gluing or mechanical fixing;it has the advantages of simple operation, high production efficiency; and environmental friendliness. (2) Aftertherotating welding, the wood underwent significant pyrolysis, especially the degradation of hemicellulose. The heat generated in the welding process caused good melting and mechanical interlocking between the dowel and the wall of the guide hole, but it was also accompanied by afriction loss of the dowel and the substrate. (3) The welding parameters affected the wood’s connection strength and stability by altering heat production, distribution, transfer, and frictional losses. The impact of the dowel-to-guide hole diameter ratio had a great influence on the connection strength. When the diameter ratio was 1:0.7, the tensile strength was the highest, reaching 2.27 MPa. (4) The analyses of XPS, FTIR, XRD, and SEM proved thatthechemical composition changes at the interface, leading to a more structured crystalline bond and enhanced connection strength due to fiber entanglement and interlocking. This research providesatheoretical and experimental basis forthefurther innovation and development of wood processing technology and provides a new technical path forthegreen manufacturing of wood structure buildings.
- Open Access
Crosslinking Mechanism of Tannin-Based Adhesives Based on Model Compounds: Copolycondensation of Resorcinol with Dimethylol Urea
This study focuses on the competition reaction rules of a system containing resorcinol (as a tannin model compound) and dimethylol urea (as a urea–formaldehyde resin model compound) under various alkaline and acidic environments. The aim is to investigate the crosslinked modification mechanism of urea–formaldehyde resin with tannin adhesive. The study delves into the competitive relationship between self-condensation polymerization reactions and co-condensation polymerization reactions. It specifically highlights the conditions for the copolycondensation reaction of dimethylolurea and resorcinol and validates its rationality through an examination of the resorcinol–urea–formaldehyde system’s reaction rules. The results show that (1) under strongly acidic conditions, the activity of carbocation intermediates produced by hydroxymethyl resorcinol for the resorcinol phenol ring is higher than the electrophilic reactivity of nitrogen atoms on hydroxymethyl urea, which is more beneficial for the resorcinol–formaldehyde self-polycondensation reaction, and the co-polycondensation structures do not play a dominant role. (2) Under weakly acidic conditions, the co-polycondensation structures are evidently advantageous over self-polycondensation structures, and the degree of the co-polycondensation reaction is positively correlated with pH below the neutral point of resorcinol. (3) Under alkaline conditions, the self-polycondensation between resorcinol and formaldehyde is dominant in the system. (4) The concentration of hydroxymethyl urea carbocation is the key factor to determine the degree of the co-polycondensation reaction.
Open AccessCrosslinking Mechanism of Tannin-Based Adhesives Based on Model Compounds: Copolycondensation of Resorcinol with Dimethylol Urea
This study focuses on the competition reaction rules of a system containing resorcinol (as a tannin model compound) and dimethylol urea (as a urea–formaldehyde resin model compound) under various alkaline and acidic environments. The aim is to investigate the crosslinked modification mechanism of urea–formaldehyde resin with tannin adhesive. The study delves into the competitive relationship between self-condensation polymerization reactions and co-condensation polymerization reactions. It specifically highlights the conditions for the copolycondensation reaction of dimethylolurea and resorcinol and validates its rationality through an examination of the resorcinol–urea–formaldehyde system’s reaction rules. The results show that (1) under strongly acidic conditions, the activity of carbocation intermediates produced by hydroxymethyl resorcinol for the resorcinol phenol ring is higher than the electrophilic reactivity of nitrogen atoms on hydroxymethyl urea, which is more beneficial for the resorcinol–formaldehyde self-polycondensation reaction, and the co-polycondensation structures do not play a dominant role. (2) Under weakly acidic conditions, the co-polycondensation structures are evidently advantageous over self-polycondensation structures, and the degree of the co-polycondensation reaction is positively correlated with pH below the neutral point of resorcinol. (3) Under alkaline conditions, the self-polycondensation between resorcinol and formaldehyde is dominant in the system. (4) The concentration of hydroxymethyl urea carbocation is the key factor to determine the degree of the co-polycondensation reaction.
- Open Access
Melamine–Urea–Formaldehyde Resin Adhesive Modified with Recycling Lignin: Preparation, Structures and Properties
The wettability, bonding strength and flexibility of modified melamine–urea–formaldehyde resin adhesive with hydroxymethyl lignin (LMUF) were investigated. Moreover, the curing performance, thermal properties and chemical structure of LMUF were analyzed by differential scanning calorimetry (DSC), thermogravimetry (TG), scanning electronmicroscopy (SEM), X–ray diffraction (XRD), Fourier–transform infrared spectroscopy (FTIR) and 13C nuclear magnetic resonance (13C–NMR). The synthesis mechanism of LMUF was also discussed. The results demonstrated that: (1) LMUF resin is characterized by low free formaldehyde and a short pot life. (2) With the increase in hydroxymethyl lignin, the bonding strength and flexibility of the LMUF increased first and then decreased. They reached their maximum when the hydroxymethyl lignin content was 6%–8%, which represented increases of 36% and 102%, respectively. (3) The DSC and TG analyses showed that the LMUF resin had a high hot-pressing temperature, but its thermostability was increased. (4) The XRD and SEM analyses proved that the LMUF resin was characterized by flexibility failure, especially at 6% of hydroxymethyl lignin. (5) Hydroxymethyl lignin is a type of flexible long-chain molecule, which was introduced into spaces between the rigid triazine rings through adhesion and penetration, thus improving the regular single structural form of MUF resin and increasing the compactness of the system. As a result, the resin had stronger deformability and cohesion in the molecules. The bonding strength and flexibility were improved to different degrees.
Open AccessMelamine–Urea–Formaldehyde Resin Adhesive Modified with Recycling Lignin: Preparation, Structures and Properties
The wettability, bonding strength and flexibility of modified melamine–urea–formaldehyde resin adhesive with hydroxymethyl lignin (LMUF) were investigated. Moreover, the curing performance, thermal properties and chemical structure of LMUF were analyzed by differential scanning calorimetry (DSC), thermogravimetry (TG), scanning electronmicroscopy (SEM), X–ray diffraction (XRD), Fourier–transform infrared spectroscopy (FTIR) and 13C nuclear magnetic resonance (13C–NMR). The synthesis mechanism of LMUF was also discussed. The results demonstrated that: (1) LMUF resin is characterized by low free formaldehyde and a short pot life. (2) With the increase in hydroxymethyl lignin, the bonding strength and flexibility of the LMUF increased first and then decreased. They reached their maximum when the hydroxymethyl lignin content was 6%–8%, which represented increases of 36% and 102%, respectively. (3) The DSC and TG analyses showed that the LMUF resin had a high hot-pressing temperature, but its thermostability was increased. (4) The XRD and SEM analyses proved that the LMUF resin was characterized by flexibility failure, especially at 6% of hydroxymethyl lignin. (5) Hydroxymethyl lignin is a type of flexible long-chain molecule, which was introduced into spaces between the rigid triazine rings through adhesion and penetration, thus improving the regular single structural form of MUF resin and increasing the compactness of the system. As a result, the resin had stronger deformability and cohesion in the molecules. The bonding strength and flexibility were improved to different degrees.
- Open Access
A Composite Whole-Biomass Tannin–Sucrose–Soy Protein Wood Adhesive with High Performance
Whole-biomass adhesives are the research hotspot of wood adhesives andcan improve the competitiveness of adhesives. The tannin–sucrose adhesive studied by our research group shows good bonding performance, but poor bonding stability induced by low viscosity. In this study, the tannin–sucrose adhesive was modified by isolated soybean protein (SPI), the effect of the SPI substitution ratio for tannin on the properties of the tannin–sucrose–SPI composite adhesive was investigated, and the bonding mechanism was explored using Fourier-transform infrared spectroscopy (FT-IR), thermogravimetry (TG), X-ray diffraction (XRD), and gas chromatography–mass spectroscopy (GC–MS). The results showed that: (1) when the SPI substitution ratio was above 40%, the viscosity of the composite adhesive increased significantly, which effectively avoided adhesive leakage. (2) The tannin–sucrose–SPI composite adhesive displayed high bonding performance and water resistance. (3) The FTIR and GC–MS results revealed that the curing mechanism of the tannin–sucrose–SPI adhesive was very complicated, but it was certain that the conversion of sucrose into furan compounds, especially 5-hydroxymethylfurfural (5-HMF), was the core of the cross-linking reaction of the adhesive when elevating temperature. (4) The macromolecules and high reactivity of SPI compensated for the shortage of high temperature required for the conversion of sucrose into furanic cross-linkers so that the tannin–sucrose–SPI adhesive experienced an efficient curing reaction at a low temperature, and the reaction degree and thermal stability of the curing product increased.
Open AccessA Composite Whole-Biomass Tannin–Sucrose–Soy Protein Wood Adhesive with High Performance
Whole-biomass adhesives are the research hotspot of wood adhesives andcan improve the competitiveness of adhesives. The tannin–sucrose adhesive studied by our research group shows good bonding performance, but poor bonding stability induced by low viscosity. In this study, the tannin–sucrose adhesive was modified by isolated soybean protein (SPI), the effect of the SPI substitution ratio for tannin on the properties of the tannin–sucrose–SPI composite adhesive was investigated, and the bonding mechanism was explored using Fourier-transform infrared spectroscopy (FT-IR), thermogravimetry (TG), X-ray diffraction (XRD), and gas chromatography–mass spectroscopy (GC–MS). The results showed that: (1) when the SPI substitution ratio was above 40%, the viscosity of the composite adhesive increased significantly, which effectively avoided adhesive leakage. (2) The tannin–sucrose–SPI composite adhesive displayed high bonding performance and water resistance. (3) The FTIR and GC–MS results revealed that the curing mechanism of the tannin–sucrose–SPI adhesive was very complicated, but it was certain that the conversion of sucrose into furan compounds, especially 5-hydroxymethylfurfural (5-HMF), was the core of the cross-linking reaction of the adhesive when elevating temperature. (4) The macromolecules and high reactivity of SPI compensated for the shortage of high temperature required for the conversion of sucrose into furanic cross-linkers so that the tannin–sucrose–SPI adhesive experienced an efficient curing reaction at a low temperature, and the reaction degree and thermal stability of the curing product increased.
- Open Access
- 1 January 2023
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 11 (8) , 3245-3259
Study on the Preparation Process Optimization of Plywood Based on a Full Biomass Tannin-Sucrose Wood Adhesive
Biomass adhesive is conducive to decreasing the dependence of the wood adhesive industry on synthetic resin based on fossil resources and improving the market competitiveness of adhesives. It is also a critical breakthrough to realize the goal of carbon peaking and carbon neutrality in the wood industry. In this study, a full biomass wood adhesive composed of tannin and sucrose was developed and applied successfully to the preparation of plywood. The preparation technique of plywood was optimized, and the chemical structure, curing performance, crystallization property and thermal performance of the adhesive were investigated. Results showed that: (1) hot-pressing temperature played a decisive role in the performances of tannin-sucrose composite adhesives and it also had a very significant influence on the water resistance of plywood. (2) The preparation of tannin-sucrose composite adhesive was a process in which sucrose was transformed into furan aldehydes and then made cross-linking reaction with tannin. These composite adhesives could only get good bonding performances when the curing temperature was above 210°C. (3) The optimal plywood preparation technique was: hot-pressing temperature of 220°C, hot-pressing time of 1.2 min/mm, m(tannin):m(sucrose) of 60:40, and adhesive loading of 160 g/m2. The wet bonding strength in boiling water of the prepared plywood was 0.83 MPa, meeting the strength requirements of Type-I plywood in the standard of GB/T 17657-2013. (4) The curing temperature of tannin-sucrose composite adhesive was further decreased by lowering the temperature during the transformation of sucrose into 5-HMF, which was a key in subsequent research.
- 1 January 2023
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 11 (8) , 3245-3259
Open AccessStudy on the Preparation Process Optimization of Plywood Based on a Full Biomass Tannin-Sucrose Wood Adhesive
Biomass adhesive is conducive to decreasing the dependence of the wood adhesive industry on synthetic resin based on fossil resources and improving the market competitiveness of adhesives. It is also a critical breakthrough to realize the goal of carbon peaking and carbon neutrality in the wood industry. In this study, a full biomass wood adhesive composed of tannin and sucrose was developed and applied successfully to the preparation of plywood. The preparation technique of plywood was optimized, and the chemical structure, curing performance, crystallization property and thermal performance of the adhesive were investigated. Results showed that: (1) hot-pressing temperature played a decisive role in the performances of tannin-sucrose composite adhesives and it also had a very significant influence on the water resistance of plywood. (2) The preparation of tannin-sucrose composite adhesive was a process in which sucrose was transformed into furan aldehydes and then made cross-linking reaction with tannin. These composite adhesives could only get good bonding performances when the curing temperature was above 210°C. (3) The optimal plywood preparation technique was: hot-pressing temperature of 220°C, hot-pressing time of 1.2 min/mm, m(tannin):m(sucrose) of 60:40, and adhesive loading of 160 g/m2. The wet bonding strength in boiling water of the prepared plywood was 0.83 MPa, meeting the strength requirements of Type-I plywood in the standard of GB/T 17657-2013. (4) The curing temperature of tannin-sucrose composite adhesive was further decreased by lowering the temperature during the transformation of sucrose into 5-HMF, which was a key in subsequent research.
- Open Access
Fully Bio-Based Adhesive from Tannin and Sucrose for Plywood Manufacturing with High Performances
Fully bio-based adhesives are beneficial to reduce the dependence of the wood adhesive industry on synthetic resins based on petrochemical resources and enhance the market competitiveness of adhesives. A fully bio-based wood adhesive composed of tannin and sucrose was developed and successfully used in the preparation of plywood. Effects of the preparation technology on the bonding strength and water resistance of plywood were investigated, and the properties of the adhesive were analyzed by Fourier transform infrared spectroscopy (FT-IR), thermogravimetry (TG) and X-ray diffraction (XRD) in this study. The results showed that: (1) Compared with other biomass adhesives, tannin–sucrose adhesive had the characteristics of high-solid content and low viscosity, which had the potential to prepare particleboard and fiberboard. (2) A proper mass ratio of tannin to sucrose was key to obtaining a tannin–sucrose adhesive with better properties. (3) The optimum preparation process of tannin–sucrose adhesive for plywood was as follows: hot-pressing temperature of 210 °C, hot-pressing time of 1.2 min/mm, m(tannin):m(sucrose) of 60:40 and adhesive loading of 160 g/m2. Under these conditions, the water-resistant bonding strength of the plywood was 0.89 MPa, which met the strength requirements of the Type II standard of plywood in GB/T 17657-2013. (4) The hot-pressing temperature played a decisive role in the tannin–sucrose adhesive, and the good performance of the plywood was maintained when the temperature was 210 °C or above. Thus, the prepared tannin–sucrose adhesive had high-bonding strength, good water resistance and thermal stability.
Open AccessFully Bio-Based Adhesive from Tannin and Sucrose for Plywood Manufacturing with High Performances
Fully bio-based adhesives are beneficial to reduce the dependence of the wood adhesive industry on synthetic resins based on petrochemical resources and enhance the market competitiveness of adhesives. A fully bio-based wood adhesive composed of tannin and sucrose was developed and successfully used in the preparation of plywood. Effects of the preparation technology on the bonding strength and water resistance of plywood were investigated, and the properties of the adhesive were analyzed by Fourier transform infrared spectroscopy (FT-IR), thermogravimetry (TG) and X-ray diffraction (XRD) in this study. The results showed that: (1) Compared with other biomass adhesives, tannin–sucrose adhesive had the characteristics of high-solid content and low viscosity, which had the potential to prepare particleboard and fiberboard. (2) A proper mass ratio of tannin to sucrose was key to obtaining a tannin–sucrose adhesive with better properties. (3) The optimum preparation process of tannin–sucrose adhesive for plywood was as follows: hot-pressing temperature of 210 °C, hot-pressing time of 1.2 min/mm, m(tannin):m(sucrose) of 60:40 and adhesive loading of 160 g/m2. Under these conditions, the water-resistant bonding strength of the plywood was 0.89 MPa, which met the strength requirements of the Type II standard of plywood in GB/T 17657-2013. (4) The hot-pressing temperature played a decisive role in the tannin–sucrose adhesive, and the good performance of the plywood was maintained when the temperature was 210 °C or above. Thus, the prepared tannin–sucrose adhesive had high-bonding strength, good water resistance and thermal stability.