SYShuang Yin

Shuang Yin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shuang Yin has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improving the Strength of Eucalyptus Wood Joints Through Optimized Rotary Welding Conditions

    by Jiankun Liang, Xiao Zhong, Yuqi Yang, Guifen Yang, Shuang Yin, Feiyan Gong, Chuchu Chen, Huali Li, Tong Meng, Yulan Jian, et al.

    Conventional wood connections rely on adhesives and metal fasteners, causing environmental concerns. Wood rotary welding offers an adhesive-free alternative. This study systematically investigated rotary welding of eucalyptus wood, evaluating process parameters’ effects on joint performance. Chemical and microstructural transformations at the welding interface were characterized using FT-IR, XPS, XRD, SEM, and TGA. Optimal parameters significantly enhanced connection strength compared to unwelded specimens. The welding process induced partial degradation of hemicellulose and cellulose, forming new chemical bonds and increasing carbonyl compounds. XRD revealed increased wood crystallinity, while SEM showed tighter interfaces with enhanced mechanical interlocking. TGA confirmed improved thermal stability at the welded interface. The findings demonstrate that rotary welding improves eucalyptus wood joint strength through combined chemical, thermal, and structural modifications, providing guidance for optimizing welding protocols in sustainable wood manufacturing.

  • Open Access

    Effects of Dowel Rotation Welding Conditions on Connection Performance for Chinese Fir Dimension Lumbers

    by Xiao Zhong, De Li, Xiaoxue Xu, Quan Li, Danyun Yu, Zhigang Wu, Jiankun Liang, Jun Peng, Wen Gu, Xin Zhao, et al.

    In this study, the rotating welding process of Chinese fir (Keteleeriafortunei) in Guizhou, China, was systematically analyzed. The effects of rotating welding conditions, including the dowel-to-guide hole diameter ratio, welding time, depth, base surface, angle, and dowel type, on the performance of welded Chinese fir were explored. Moreover, the physical and chemical changes oftheChinese fir interface during welding were revealed by Fourier-Transform Infrared Spectroscopy (FT-IR), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). The results indicated the following: (1) The rotating welding technology can quickly achieve a strong connection between wood through friction heat without chemical adhesives and compared with traditional wood connection technology such as gluing or mechanical fixing;it has the advantages of simple operation, high production efficiency; and environmental friendliness. (2) Aftertherotating welding, the wood underwent significant pyrolysis, especially the degradation of hemicellulose. The heat generated in the welding process caused good melting and mechanical interlocking between the dowel and the wall of the guide hole, but it was also accompanied by afriction loss of the dowel and the substrate. (3) The welding parameters affected the wood’s connection strength and stability by altering heat production, distribution, transfer, and frictional losses. The impact of the dowel-to-guide hole diameter ratio had a great influence on the connection strength. When the diameter ratio was 1:0.7, the tensile strength was the highest, reaching 2.27 MPa. (4) The analyses of XPS, FTIR, XRD, and SEM proved thatthechemical composition changes at the interface, leading to a more structured crystalline bond and enhanced connection strength due to fiber entanglement and interlocking. This research providesatheoretical and experimental basis forthefurther innovation and development of wood processing technology and provides a new technical path forthegreen manufacturing of wood structure buildings.


  • Open Access

    Crosslinking Mechanism of Tannin-Based Adhesives Based on Model Compounds: Copolycondensation of Resorcinol with Dimethylol Urea

    by Jiankun Liang, De Li, Xiao Zhong, Zhigang Wu, Ming Cao, Guifen Yang, Shuang Yin, Feiyan Gong

    This study focuses on the competition reaction rules of a system containing resorcinol (as a tannin model compound) and dimethylol urea (as a urea–formaldehyde resin model compound) under various alkaline and acidic environments. The aim is to investigate the crosslinked modification mechanism of urea–formaldehyde resin with tannin adhesive. The study delves into the competitive relationship between self-condensation polymerization reactions and co-condensation polymerization reactions. It specifically highlights the conditions for the copolycondensation reaction of dimethylolurea and resorcinol and validates its rationality through an examination of the resorcinol–urea–formaldehyde system’s reaction rules. The results show that (1) under strongly acidic conditions, the activity of carbocation intermediates produced by hydroxymethyl resorcinol for the resorcinol phenol ring is higher than the electrophilic reactivity of nitrogen atoms on hydroxymethyl urea, which is more beneficial for the resorcinol–formaldehyde self-polycondensation reaction, and the co-polycondensation structures do not play a dominant role. (2) Under weakly acidic conditions, the co-polycondensation structures are evidently advantageous over self-polycondensation structures, and the degree of the co-polycondensation reaction is positively correlated with pH below the neutral point of resorcinol. (3) Under alkaline conditions, the self-polycondensation between resorcinol and formaldehyde is dominant in the system. (4) The concentration of hydroxymethyl urea carbocation is the key factor to determine the degree of the co-polycondensation reaction.