Jan-Christopher Cohrs
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jan-Christopher Cohrs has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Diana Rechid
4 shared publications- Eric Samakinwa
Institute of Geography, University of Bern, Bern, Switzerland
4 shared publications - Leon Scheiber
Helmholtz-Zentrum Hereon
3 shared publications - Tim Tewes
Department of Urban Planning and Environment, City of Constance, 78462 Konstanz, Germany
3 shared publications Susanne Pfeifer
2 shared publicationsBenjamin Berkels
Aachen Institute for Advanced Study in Computational Engineering Science (AICES), RWTH Aachen University, Aachen, Germany
1 shared publication
Latest Publications
- Open Access
- 17 September 2026
- Published by IOP Publishing in Environmental Research Letters
- Vol. 21 (18) , 184012
Mean-state warming loads Germany’s extreme summer heat burden
European summers are warming rapidly, increasing the frequency and intensity of hazardous heat. Here, we quantify how mean-state warming has increased Germany’s extreme summer heat burden and how that risk scales with global-warming level (GWL). We develop OMS (observation-based mean-shift), an observation-based counterfactual framework that preserves observed day-to-day weather variability while shifting only the seasonal mean state. Using OMS, we estimate Germany’s JJA mean-temperature sensitivity to global mean surface temperature (GMST) and translate observed summers to pre-industrial (PI), + 1.5 ∘ C , and + 2.0 ∘ C climates by shifting the observed daily JJA series by β times the change in GMST. Because only the seasonal mean is adjusted, OMS isolates the weather-preserving mean-state contribution to heat burden while leaving circulation statistics unchanged. Germany exhibits strong regional amplification, with an estimated sensitivity of 2.63 ∘ C of local summer warming per 1 ∘ C of global warming (95% confidence interval: 1.62–3.62). To connect warming to exposure-relevant outcomes, we define the extreme-heat burden (EHD), measured in ∘ C d, as the cumulative degrees above a fixed national summer 95th-percentile threshold for 1991–2020. We apply OMS to the selected extreme summers of 2018, 2019, and 2022 within the 2004–2024 study period to construct GWL-consistent counterfactual realizations for each case while retaining intra-seasonal variability. Across all three summers, anthropogenic warming yields a substantial increase in EHD from PI to present-day conditions, with further marked increases toward + 1.5 ∘ C and + 2.0 ∘ C . Subnational analyses show coherent increases across all federal states, but substantial heterogeneity in magnitude, highlighting where risk intensifies most strongly as warming progresses. We additionally quantify per-capita EHD using population data and assess distributional equity across states. These observation-based estimates provide a transparent basis for heat-risk planning and adaptation by separating the realized anthropogenic contribution from the additional mean-state burden associated with higher GWLs.
- 17 September 2026
- Published by IOP Publishing in Environmental Research Letters
- Vol. 21 (18) , 184012
Open AccessMean-state warming loads Germany’s extreme summer heat burden
European summers are warming rapidly, increasing the frequency and intensity of hazardous heat. Here, we quantify how mean-state warming has increased Germany’s extreme summer heat burden and how that risk scales with global-warming level (GWL). We develop OMS (observation-based mean-shift), an observation-based counterfactual framework that preserves observed day-to-day weather variability while shifting only the seasonal mean state. Using OMS, we estimate Germany’s JJA mean-temperature sensitivity to global mean surface temperature (GMST) and translate observed summers to pre-industrial (PI), + 1.5 ∘ C , and + 2.0 ∘ C climates by shifting the observed daily JJA series by β times the change in GMST. Because only the seasonal mean is adjusted, OMS isolates the weather-preserving mean-state contribution to heat burden while leaving circulation statistics unchanged. Germany exhibits strong regional amplification, with an estimated sensitivity of 2.63 ∘ C of local summer warming per 1 ∘ C of global warming (95% confidence interval: 1.62–3.62). To connect warming to exposure-relevant outcomes, we define the extreme-heat burden (EHD), measured in ∘ C d, as the cumulative degrees above a fixed national summer 95th-percentile threshold for 1991–2020. We apply OMS to the selected extreme summers of 2018, 2019, and 2022 within the 2004–2024 study period to construct GWL-consistent counterfactual realizations for each case while retaining intra-seasonal variability. Across all three summers, anthropogenic warming yields a substantial increase in EHD from PI to present-day conditions, with further marked increases toward + 1.5 ∘ C and + 2.0 ∘ C . Subnational analyses show coherent increases across all federal states, but substantial heterogeneity in magnitude, highlighting where risk intensifies most strongly as warming progresses. We additionally quantify per-capita EHD using population data and assess distributional equity across states. These observation-based estimates provide a transparent basis for heat-risk planning and adaptation by separating the realized anthropogenic contribution from the additional mean-state burden associated with higher GWLs.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Mean-state warming loads Germany’s extreme-summer heat burden
European summers are warming rapidly, increasing the frequency and intensity of hazardous heat. Here we quantify how mean-state warming has increased Germany's summer extreme-heat burden and how that risk scales with global warming level (GWL). We introduce OMS (Observation-based Mean-Shift), an observation-based counterfactual framework that preserves observed day-to-day weather variability while shifting only the seasonal mean state. Using OMS, we quantify Germany's sensitivity of June--August mean temperature to global mean surface temperature and translate observed summers to pre-industrial, +1.5 °C, and +2.0 °C climates by shifting the observed daily JJA series. Because only the seasonal mean is adjusted, OMS isolates the thermodynamic signal while leaving circulation statistics unchanged, providing a conservative baseline.Germany exhibits strong regional amplification, with an estimated sensitivity of +2.63 °C of local summer warming per +1 °C of global warming and a 95% confidence interval of 1.62–3.62. To connect warming to exposure-relevant outcomes, we define the extreme-heat burden, EHD, in °C·days as cumulative degrees above a fixed national summer 95th-percentile threshold for 1991–2020. We evaluate the high-impact summers of 2018, 2019, and 2022, producing warming-level-consistent counterfactual realizations for each event while retaining intra-seasonal variability. Across these events, anthropogenic warming yields a substantial increase in EHD from pre-industrial to present-day conditions, with sharp further escalation toward +1.5 °C and +2.0 °C. Subnational analyses show coherent increases across all federal states but with substantial heterogeneity in magnitude, highlighting where risk intensifies most strongly as warming progresses. We additionally quantify per-capita burden using population data and assess distributional equity using Lorenz curves and Gini coefficients. Gini coefficients show that total extreme-heat burden is distributed fairly evenly across years, whereas per-capita extreme-heat burden is notably more concentrated. This implies that while the overall hazard is broadly spread across federal states, population-normalized exposure is substantially more unequal, with a disproportionate share of per-capita heat burden concentrated in a subset of states.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessMean-state warming loads Germany’s extreme-summer heat burden
European summers are warming rapidly, increasing the frequency and intensity of hazardous heat. Here we quantify how mean-state warming has increased Germany's summer extreme-heat burden and how that risk scales with global warming level (GWL). We introduce OMS (Observation-based Mean-Shift), an observation-based counterfactual framework that preserves observed day-to-day weather variability while shifting only the seasonal mean state. Using OMS, we quantify Germany's sensitivity of June--August mean temperature to global mean surface temperature and translate observed summers to pre-industrial, +1.5 °C, and +2.0 °C climates by shifting the observed daily JJA series. Because only the seasonal mean is adjusted, OMS isolates the thermodynamic signal while leaving circulation statistics unchanged, providing a conservative baseline.Germany exhibits strong regional amplification, with an estimated sensitivity of +2.63 °C of local summer warming per +1 °C of global warming and a 95% confidence interval of 1.62–3.62. To connect warming to exposure-relevant outcomes, we define the extreme-heat burden, EHD, in °C·days as cumulative degrees above a fixed national summer 95th-percentile threshold for 1991–2020. We evaluate the high-impact summers of 2018, 2019, and 2022, producing warming-level-consistent counterfactual realizations for each event while retaining intra-seasonal variability. Across these events, anthropogenic warming yields a substantial increase in EHD from pre-industrial to present-day conditions, with sharp further escalation toward +1.5 °C and +2.0 °C. Subnational analyses show coherent increases across all federal states but with substantial heterogeneity in magnitude, highlighting where risk intensifies most strongly as warming progresses. We additionally quantify per-capita burden using population data and assess distributional equity using Lorenz curves and Gini coefficients. Gini coefficients show that total extreme-heat burden is distributed fairly evenly across years, whereas per-capita extreme-heat burden is notably more concentrated. This implies that while the overall hazard is broadly spread across federal states, population-normalized exposure is substantially more unequal, with a disproportionate share of per-capita heat burden concentrated in a subset of states.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
FOCAL Urban Pilot: Efficient exploration of climate data locally for data-driven decision-support in urban climate adaptation planning
Climate change impacts are increasingly manifested at local scales, where mitigation and adaptation strategies are implemented. Despite the growing wealth of available climate data and services, their effective usage in local climate impact assessment and decision-making processes for mitigation and adaptation planning remains limited due to scale mismatches, computational constraints, complexity, and usability barriers for non-domain experts. Addressing these challenges requires both advanced computational methods and improved access to climate data and analysis tools. The EU Horizon project, FOCAL, bridges the gap between data, services, and their users by implementing an open compute platform that combines intelligent workflow management with high-performance computing (HPC) resources to allow for an efficient exploration of climate data on a local scale. In addition, innovative artificial intelligence (AI) tools are developed and made available to enhance climate data analysis in terms of speed, robustness, pattern detection, and localization; thereby expanding the toolkit of climate data analysis and impact assessment methods. A main objective of FOCAL is to support science-based, actionable decision-making processes in forestry and urban planning through its provided tools. In a co-design process involving developers and potential platform users from two forest pilot regions with contrasting ecological and management contexts (Forest Pilots) as well as a pilot city (Urban Pilot), web applications for intuitive user-platform-interaction and workflows, grounded in state-of-the-art climate science, to address concrete user questions in forestry and urban planning have been specified. As a result, decision makers can efficiently use climate data for the development of climate adaptation strategies.This contribution focuses on the Urban Pilot, implemented for the pilot city Constance (Baden-Württemberg, southern Germany), located at the western end of Lake Constance. Three core workflows have been developed:1) Regional climate change workflow: provision of robust regional climate change information for the past and the future under different global warming levels for urban areas, based on regional climate model and localized climate data, serving multi-sectoral local climate impact assessments;2) Urban hot and cool spot workflow: detection and high-spatial-resolution visual exploration of hot and cool spots in urban environments, supporting exposure assessment by integrating additional data (e.g., population or infrastructure data), risk assessment, and the planning of urban heat resilience measures and cooling spaces;3) Urban blue spot workflow: identification of blue spots (rainfall accumulation hazards) and provision of blue spot data in urban landscapes using processed precipitation data and extreme precipitation scenarios, supporting applications in hydrological modeling, flood risk management, and climate adaptation.By leveraging HPC-based data processing and AI-assisted analysis, these workflows translate complex climate data into actionable, locally relevant information. While demonstrated for the pilot city Constance, the methods and workflows are transferable to other urban areas, contributing to scalable and reproducible climate services.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessFOCAL Urban Pilot: Efficient exploration of climate data locally for data-driven decision-support in urban climate adaptation planning
Climate change impacts are increasingly manifested at local scales, where mitigation and adaptation strategies are implemented. Despite the growing wealth of available climate data and services, their effective usage in local climate impact assessment and decision-making processes for mitigation and adaptation planning remains limited due to scale mismatches, computational constraints, complexity, and usability barriers for non-domain experts. Addressing these challenges requires both advanced computational methods and improved access to climate data and analysis tools. The EU Horizon project, FOCAL, bridges the gap between data, services, and their users by implementing an open compute platform that combines intelligent workflow management with high-performance computing (HPC) resources to allow for an efficient exploration of climate data on a local scale. In addition, innovative artificial intelligence (AI) tools are developed and made available to enhance climate data analysis in terms of speed, robustness, pattern detection, and localization; thereby expanding the toolkit of climate data analysis and impact assessment methods. A main objective of FOCAL is to support science-based, actionable decision-making processes in forestry and urban planning through its provided tools. In a co-design process involving developers and potential platform users from two forest pilot regions with contrasting ecological and management contexts (Forest Pilots) as well as a pilot city (Urban Pilot), web applications for intuitive user-platform-interaction and workflows, grounded in state-of-the-art climate science, to address concrete user questions in forestry and urban planning have been specified. As a result, decision makers can efficiently use climate data for the development of climate adaptation strategies.This contribution focuses on the Urban Pilot, implemented for the pilot city Constance (Baden-Württemberg, southern Germany), located at the western end of Lake Constance. Three core workflows have been developed:1) Regional climate change workflow: provision of robust regional climate change information for the past and the future under different global warming levels for urban areas, based on regional climate model and localized climate data, serving multi-sectoral local climate impact assessments;2) Urban hot and cool spot workflow: detection and high-spatial-resolution visual exploration of hot and cool spots in urban environments, supporting exposure assessment by integrating additional data (e.g., population or infrastructure data), risk assessment, and the planning of urban heat resilience measures and cooling spaces;3) Urban blue spot workflow: identification of blue spots (rainfall accumulation hazards) and provision of blue spot data in urban landscapes using processed precipitation data and extreme precipitation scenarios, supporting applications in hydrological modeling, flood risk management, and climate adaptation.By leveraging HPC-based data processing and AI-assisted analysis, these workflows translate complex climate data into actionable, locally relevant information. While demonstrated for the pilot city Constance, the methods and workflows are transferable to other urban areas, contributing to scalable and reproducible climate services.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Changing humid heat exposure in Germany – where senior citizens will be most affected and why
Europe is currently the fastest warming continent and even in temperate countries such as Germany the number of extreme temperature days has been rising. These pose increasing risks to human health and wellbeing. Yet, while dry heat and urban heat islands have received substantial scientific attention, humid heat episodes have historically been rare in Central Europe. Recent observations, however, indicate that their frequency and intensity are growing, and projections suggest that regions once considered climatically temperate may increasingly encounter conditions previously confined to the tropics. In this study, we examine humid heat stress in terms of days with exceptionally high vapor pressure exceeding a critical threshold of 18.8 hPa. With a particular focus on elderly populations (65+), we quantify humid heat stress in Germany for a historical reference period (1961-1990) calculated from ERA5 re-analysis, and for the future under a global warming level of +2 °C using an ensemble of convection permitting RCM simulations at 3 km resolution. An integration with official population counts and projections yields humid heat exposure estimates. Beyond spatio-temporal trends, the analysis decomposes the drivers of change into three components: (i) climate change, (ii) population growth or decline, and (iii) demographic ageing.Data analysis for the reference period revealed pronounced spatial disparities: average annual humid heat days peak in Berlin and Brandenburg, whereas humid heat is most seldom in Thuringia and Schleswig-Holstein. While population densities are the highest in the three German city states and lowest in the eastern part of Germany, this pattern is also reflected in the proportion of senior citizens. By combining humid heat frequency, population, and elderly share, we derive the number of “senior citizen humid heat events.” In the reference period, this indicator is dominated by population distribution resulting in maximum exposure in Berlin, Hamburg and Bremen. Preliminary results for +2 °C global warming suggest significant changes in climatic hotspots. Ongoing work will assess how these and other spatial patterns are expected to propagate in detail, before quantifying the relative contributions of climate, population, and demographic change to future humid heat exposure in Germany.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessChanging humid heat exposure in Germany – where senior citizens will be most affected and why
Europe is currently the fastest warming continent and even in temperate countries such as Germany the number of extreme temperature days has been rising. These pose increasing risks to human health and wellbeing. Yet, while dry heat and urban heat islands have received substantial scientific attention, humid heat episodes have historically been rare in Central Europe. Recent observations, however, indicate that their frequency and intensity are growing, and projections suggest that regions once considered climatically temperate may increasingly encounter conditions previously confined to the tropics. In this study, we examine humid heat stress in terms of days with exceptionally high vapor pressure exceeding a critical threshold of 18.8 hPa. With a particular focus on elderly populations (65+), we quantify humid heat stress in Germany for a historical reference period (1961-1990) calculated from ERA5 re-analysis, and for the future under a global warming level of +2 °C using an ensemble of convection permitting RCM simulations at 3 km resolution. An integration with official population counts and projections yields humid heat exposure estimates. Beyond spatio-temporal trends, the analysis decomposes the drivers of change into three components: (i) climate change, (ii) population growth or decline, and (iii) demographic ageing.Data analysis for the reference period revealed pronounced spatial disparities: average annual humid heat days peak in Berlin and Brandenburg, whereas humid heat is most seldom in Thuringia and Schleswig-Holstein. While population densities are the highest in the three German city states and lowest in the eastern part of Germany, this pattern is also reflected in the proportion of senior citizens. By combining humid heat frequency, population, and elderly share, we derive the number of “senior citizen humid heat events.” In the reference period, this indicator is dominated by population distribution resulting in maximum exposure in Berlin, Hamburg and Bremen. Preliminary results for +2 °C global warming suggest significant changes in climatic hotspots. Ongoing work will assess how these and other spatial patterns are expected to propagate in detail, before quantifying the relative contributions of climate, population, and demographic change to future humid heat exposure in Germany.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Assessing High-Resolution Interactive Lake Modeling via Lake Constance’s Influence on Local Climate
Large water bodies significantly influence local and regional climates, especially in urban settings. However, capturing the complex interplay between mesoscale atmospheric processes, lake-atmosphere feedbacks, and Urban Heat Island (UHI) dynamics remains challenging, particularly under changing climatic conditions. This study uses REgional MOdel (REMO) coupled with the interactive 1-D Freshwater Lake model (FLake) to assess the added value of high-resolution dynamical downscaling and interactive lake modeling.Simulations are performed at spatial resolutions of 12.5 km and 3 km, enabling a systematic evaluation of the impact of high-resolution dynamical downscaling on the accurate representation of lake-atmosphere interactions and associated mesoscale processes. These 3 km simulations were conducted within the framework of the BMBF-funded project NUKLEUS. Furthermore, this study is part of the EU-funded project FOCAL, which includes an urban pilot in Constance, Germany, aimed at efficiently exploring climate data locally. Key metrics, including mean and extreme temperatures, precipitation, and relevant indices, are analyzed against high-resolution observational datasets provided by the German Weather Service (DWD). Our study investigates the influence of Lake Constance on UHI dynamics within the city of Constance and its surrounding areas, with a focus on how interactive lake modeling affects urban-rural climate gradients. By analyzing both spatial and temporal climate patterns, along with key physical processes such as energy fluxes, wind patterns, and heat exchanges, we assess whether higher spatial resolution leads to a more accurate representation of lake-atmosphere interactions.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessAssessing High-Resolution Interactive Lake Modeling via Lake Constance’s Influence on Local Climate
Large water bodies significantly influence local and regional climates, especially in urban settings. However, capturing the complex interplay between mesoscale atmospheric processes, lake-atmosphere feedbacks, and Urban Heat Island (UHI) dynamics remains challenging, particularly under changing climatic conditions. This study uses REgional MOdel (REMO) coupled with the interactive 1-D Freshwater Lake model (FLake) to assess the added value of high-resolution dynamical downscaling and interactive lake modeling.Simulations are performed at spatial resolutions of 12.5 km and 3 km, enabling a systematic evaluation of the impact of high-resolution dynamical downscaling on the accurate representation of lake-atmosphere interactions and associated mesoscale processes. These 3 km simulations were conducted within the framework of the BMBF-funded project NUKLEUS. Furthermore, this study is part of the EU-funded project FOCAL, which includes an urban pilot in Constance, Germany, aimed at efficiently exploring climate data locally. Key metrics, including mean and extreme temperatures, precipitation, and relevant indices, are analyzed against high-resolution observational datasets provided by the German Weather Service (DWD). Our study investigates the influence of Lake Constance on UHI dynamics within the city of Constance and its surrounding areas, with a focus on how interactive lake modeling affects urban-rural climate gradients. By analyzing both spatial and temporal climate patterns, along with key physical processes such as energy fluxes, wind patterns, and heat exchanges, we assess whether higher spatial resolution leads to a more accurate representation of lake-atmosphere interactions.
- 6 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-21
A Distribution-Dependent Mumford–Shah Model for Unsupervised Hyperspectral Image Segmentation
Hyperspectral images provide a rich representation of the underlying spectrum for each pixel, allowing for a pixel-wise classification/segmentation into different classes. As the acquisition of labeled training data is very time-consuming, unsupervised methods become crucial in hyperspectral image analysis. The spectral variability and noise in hyperspectral data make this task very challenging and define special requirements for such methods. Here, we present a novel unsupervised hyperspectral segmentation framework. It starts with a denoising and dimensionality reduction step by the well-established Minimum Noise Fraction (MNF) transform. Then, the Mumford-Shah (MS) segmentation functional is applied to segment the data. We equipped the MS functional with a novel robust distribution-dependent indicator function designed to handle the characteristic challenges of hyperspectral data. To optimize our objective function with respect to the parameters for which no closed form solution is available, we propose an efficient fixed point iteration scheme. Numerical experiments on four public benchmark datasets show that our method produces competitive results, which outperform three state-of-the-art methods substantially on three of these datasets.
- 6 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-21
A Distribution-Dependent Mumford–Shah Model for Unsupervised Hyperspectral Image Segmentation
Hyperspectral images provide a rich representation of the underlying spectrum for each pixel, allowing for a pixel-wise classification/segmentation into different classes. As the acquisition of labeled training data is very time-consuming, unsupervised methods become crucial in hyperspectral image analysis. The spectral variability and noise in hyperspectral data make this task very challenging and define special requirements for such methods. Here, we present a novel unsupervised hyperspectral segmentation framework. It starts with a denoising and dimensionality reduction step by the well-established Minimum Noise Fraction (MNF) transform. Then, the Mumford-Shah (MS) segmentation functional is applied to segment the data. We equipped the MS functional with a novel robust distribution-dependent indicator function designed to handle the characteristic challenges of hyperspectral data. To optimize our objective function with respect to the parameters for which no closed form solution is available, we propose an efficient fixed point iteration scheme. Numerical experiments on four public benchmark datasets show that our method produces competitive results, which outperform three state-of-the-art methods substantially on three of these datasets.