Can Gong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Can Gong has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Minhan Mi
School of Microelectronics, Xidian University, Xi’an, China
12 shared publications - Xiaohua Ma
Xidian University
11 shared publications - Yue Hao
Guangzhou Wide Bandgap Semiconductor Innovation Center, Guangzhou Institute of Technology, Xidian University 1 , Guangzhou 510555
11 shared publications - Yuwei Zhou
State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, Xidian University, Xian, China
11 shared publications - Pengfei Wang
State Key Discipline Laboratory of Wide Band-gap Semiconductor Technology, School of Microelectronics, Xidian University, Xian, China
8 shared publications - Meng Zhang
Xidian University
5 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (9) , 1748-1751
Enhanced Linearity of Double-Channel Fin-HEMTs With OIP3/ P DC > 10 dB at 28 GHz
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (9) , 1748-1751
Enhanced Linearity of Double-Channel Fin-HEMTs With OIP3/ P DC > 10 dB at 28 GHz
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 458-461
High Performance Millimeter-Wave AlGaN/GaN Fin-HEMT on Si Substrate
In this work, high performance Si-based AlGaN/GaN Fin-HEMT is fabricated for high power millimeter-wave applications. Superlattice-like dislocation annihilation layers with total thickness as thin as 286 nm are utilized to improve material crystalline quality and enhance heat dissipation. The optimized Si-based GaN heterojunction shows decreased dislocation density of 1.57×109 cm-2 and improved crystalline quality with (002) FWHM of 491 arcsec and (102) FWHM of 601 arcsec. The fabricated Fin-HEMT exhibits Ids.max of 1323 mA/mm and Vknee of 2.5 V. The current collapse is decreased to 9% owing to the suppressed peak electric field at the drain side of the gate foot by Fin structure. By measuring output characteristics degradation under high temperatures, Fin-HEMT shows less saturation current reduction, attributed to additional heat dissipation path provided by Fin structure. Further, fT/fmax of 54/91 GHz are obtained for Fin-HEMT. Eventually, the millimeter-wave load-pull measurement shows that the fabricated Fin-HEMT delivers a record high output power density of 8.2 W/mm and decent power added efficiency of 45.2% together with improved linearity at 30 GHz and Vds of 20 V, which demonstrates significant potential of Si-based GaN Fin-HEMT for high-power millimeter-wave applications.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 458-461
High Performance Millimeter-Wave AlGaN/GaN Fin-HEMT on Si Substrate
In this work, high performance Si-based AlGaN/GaN Fin-HEMT is fabricated for high power millimeter-wave applications. Superlattice-like dislocation annihilation layers with total thickness as thin as 286 nm are utilized to improve material crystalline quality and enhance heat dissipation. The optimized Si-based GaN heterojunction shows decreased dislocation density of 1.57×109 cm-2 and improved crystalline quality with (002) FWHM of 491 arcsec and (102) FWHM of 601 arcsec. The fabricated Fin-HEMT exhibits Ids.max of 1323 mA/mm and Vknee of 2.5 V. The current collapse is decreased to 9% owing to the suppressed peak electric field at the drain side of the gate foot by Fin structure. By measuring output characteristics degradation under high temperatures, Fin-HEMT shows less saturation current reduction, attributed to additional heat dissipation path provided by Fin structure. Further, fT/fmax of 54/91 GHz are obtained for Fin-HEMT. Eventually, the millimeter-wave load-pull measurement shows that the fabricated Fin-HEMT delivers a record high output power density of 8.2 W/mm and decent power added efficiency of 45.2% together with improved linearity at 30 GHz and Vds of 20 V, which demonstrates significant potential of Si-based GaN Fin-HEMT for high-power millimeter-wave applications.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 450-453
AlGaN/GaN/AlGaN/GaN Double Channel Fin-HEMTs With P SAT of 14.6 W/mm and Peak PAE of 45.5% for Ka-Band Applications
In this work, high-performance double channel AlGaN/GaN/AlGaN/GaN Fin-HEMTs (DC Fin-HEMTs) for Ka-band applications are proposed. Through the introduction of a three-dimensional Fin structure, the short-channel effects of DC Fin-HEMTs are significantly suppressed compared to conventional planar-HEMTs (DC Planar-HEMTs) with the same gate length (LG) of 150 nm. And premature breakdown due to source-drain punch-through in the lower channel is prevented by the double channel Fin-structure, thus achieving an enhanced breakdown voltage (BV) of 96 V. Furthermore, the DC Fin-HEMTs exhibit a low current collapse of 7.2% under a quiescent bias of (VGSQ, VDSQ) = (-8 V, 40 V). At 28 GHz and 35 V, the DC Fin-HEMTs achieve a peak power-added-efficiency (PAE) of 45.5%, a power density (POUT) associated with the peak PAE of 9.8 W/mm, and a saturated output power density (PSAT) of 14.6 W/mm. These results indicate the significant potential of DC Fin-HEMTs for high-power radio-frequency (RF) applications in Ka-band.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 450-453
AlGaN/GaN/AlGaN/GaN Double Channel Fin-HEMTs With P SAT of 14.6 W/mm and Peak PAE of 45.5% for Ka-Band Applications
In this work, high-performance double channel AlGaN/GaN/AlGaN/GaN Fin-HEMTs (DC Fin-HEMTs) for Ka-band applications are proposed. Through the introduction of a three-dimensional Fin structure, the short-channel effects of DC Fin-HEMTs are significantly suppressed compared to conventional planar-HEMTs (DC Planar-HEMTs) with the same gate length (LG) of 150 nm. And premature breakdown due to source-drain punch-through in the lower channel is prevented by the double channel Fin-structure, thus achieving an enhanced breakdown voltage (BV) of 96 V. Furthermore, the DC Fin-HEMTs exhibit a low current collapse of 7.2% under a quiescent bias of (VGSQ, VDSQ) = (-8 V, 40 V). At 28 GHz and 35 V, the DC Fin-HEMTs achieve a peak power-added-efficiency (PAE) of 45.5%, a power density (POUT) associated with the peak PAE of 9.8 W/mm, and a saturated output power density (PSAT) of 14.6 W/mm. These results indicate the significant potential of DC Fin-HEMTs for high-power radio-frequency (RF) applications in Ka-band.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 6605-6609
Threshold Coupling AlGaN/GaN HEMT Incorporating a Composition-Modulated Barrier for High-Voltage and High-Linearity Application
In this work, a threshold coupling (TC) AlGaN/GaN high-electron-mobility transistor (HEMT) incorporating a composition-modulated Al x Ga ${}_{\text {1-}{x}}$ N barrier (CM.TC HEMT) distinguished by 100 V high-linearity operation has been proposed. Al composition (Al%) was pertinently designed in the barrier to accomplish charge redistribution, thus mitigating electric field (E-field) crowding in the recessed part of a conventional TC structure (Con.TC HEMT) and addressing its diminished linearity effectiveness under high operating voltages. As a result of the epitaxial optimization, transconductance ( ${G}_{\text {m}}$ ) roll-off with increased drain biases was suppressed, and the breakdown voltage ( ${V}_{\text {BK}}$ ) was improved from 152 to 298 V. In 3.6 GHz large signal measurement with a drain voltage ( ${V}_{\text {DS}}$ ) of 48 V, the CM.TC HEMT demonstrated comparable saturated output power density ( ${P}_{\text {sat}}$ ) to the Con.TC HEMT, while achieving a 6% higher peak power-added efficiency (PAE) and a 3 dB improvement in output third-order intercept point (OIP3). 100 V single and two-tone evaluation further revealed a ${P}_{\text {sat}}$ of 14.7 W/mm and an OIP3 of ~42.7 dBm for the CM.TC HEMT. The reported device extends the linearity benefits originally enjoyed by moderate voltages to an elevated scenario, which is promising for serving power amplifiers (PAs) that require both high-linearity and high-voltage operation.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 6605-6609
Threshold Coupling AlGaN/GaN HEMT Incorporating a Composition-Modulated Barrier for High-Voltage and High-Linearity Application
In this work, a threshold coupling (TC) AlGaN/GaN high-electron-mobility transistor (HEMT) incorporating a composition-modulated Al x Ga ${}_{\text {1-}{x}}$ N barrier (CM.TC HEMT) distinguished by 100 V high-linearity operation has been proposed. Al composition (Al%) was pertinently designed in the barrier to accomplish charge redistribution, thus mitigating electric field (E-field) crowding in the recessed part of a conventional TC structure (Con.TC HEMT) and addressing its diminished linearity effectiveness under high operating voltages. As a result of the epitaxial optimization, transconductance ( ${G}_{\text {m}}$ ) roll-off with increased drain biases was suppressed, and the breakdown voltage ( ${V}_{\text {BK}}$ ) was improved from 152 to 298 V. In 3.6 GHz large signal measurement with a drain voltage ( ${V}_{\text {DS}}$ ) of 48 V, the CM.TC HEMT demonstrated comparable saturated output power density ( ${P}_{\text {sat}}$ ) to the Con.TC HEMT, while achieving a 6% higher peak power-added efficiency (PAE) and a 3 dB improvement in output third-order intercept point (OIP3). 100 V single and two-tone evaluation further revealed a ${P}_{\text {sat}}$ of 14.7 W/mm and an OIP3 of ~42.7 dBm for the CM.TC HEMT. The reported device extends the linearity benefits originally enjoyed by moderate voltages to an elevated scenario, which is promising for serving power amplifiers (PAs) that require both high-linearity and high-voltage operation.
- 2 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (11) , 1950-1953
High Performance AlN/GaN/AlN/GaN Double Channel Fin-HEMT for Ka-band Low Voltage Wireless Communication Applications
In this letter, a high performance AlN/GaN/AlN/GaN double channel Fin-HEMT (DCF-HEMT) is proposed for Ka-band low voltage mobile communica-tion applications. Attributed to Fin-structure, the fabricated DCF-HEMT demonstrated improved off-state gate control characteristics. With a low sheet resistance (RSH) of 174 Ω/□ and the short source-drain spacing of 1.5 μm, the AlN/GaN/AlN/GaN DCF-HEMT delivered a high maximum current density of 2613 mA/mm. The off-state electric field was dispersed by double-channel structure, resulting in a low current collapse of about 7.5%. The load-pull meas-urements were carried out at 28 GHz and low operating voltages. The proposed DCF-HEMT delivered a peak pow-er-added efficiency (PAE) of 56.83% at 6 V and 61.55% at 10 V, when matched for maximum PAE. It also achieved a saturated power density (PSAT) of 3.13 W/mm at 6 V and 5.31 W/mm at 10 V, when matched for maximum POUT. Moreover, an OIP3 of 34.07 dBm highlights the excellent linearity performance of the AlN/GaN/AlN/GaN DCF-HEMT. The ex-cellent results reveal the great potential of AlN/GaN/AlN/GaN DCF-HEMT in low voltage wireless communication applications at Ka-band.
- 2 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (11) , 1950-1953
High Performance AlN/GaN/AlN/GaN Double Channel Fin-HEMT for Ka-band Low Voltage Wireless Communication Applications
In this letter, a high performance AlN/GaN/AlN/GaN double channel Fin-HEMT (DCF-HEMT) is proposed for Ka-band low voltage mobile communica-tion applications. Attributed to Fin-structure, the fabricated DCF-HEMT demonstrated improved off-state gate control characteristics. With a low sheet resistance (RSH) of 174 Ω/□ and the short source-drain spacing of 1.5 μm, the AlN/GaN/AlN/GaN DCF-HEMT delivered a high maximum current density of 2613 mA/mm. The off-state electric field was dispersed by double-channel structure, resulting in a low current collapse of about 7.5%. The load-pull meas-urements were carried out at 28 GHz and low operating voltages. The proposed DCF-HEMT delivered a peak pow-er-added efficiency (PAE) of 56.83% at 6 V and 61.55% at 10 V, when matched for maximum PAE. It also achieved a saturated power density (PSAT) of 3.13 W/mm at 6 V and 5.31 W/mm at 10 V, when matched for maximum POUT. Moreover, an OIP3 of 34.07 dBm highlights the excellent linearity performance of the AlN/GaN/AlN/GaN DCF-HEMT. The ex-cellent results reveal the great potential of AlN/GaN/AlN/GaN DCF-HEMT in low voltage wireless communication applications at Ka-band.
- 17 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (7)
An AlN/AlxGa1-xN/GaN graded channel HEMT with enhanced power and linearity performance
In this work, an AlN/AlxGa1-xN/GaN graded channel HEMT (AlN. GC HEMT) with enhanced power and linearity performance has been proposed. With the adoption of a strong-polarized AlN barrier and a graded AlxGa1-xN channel, a current density of 1806 mA/mm and a transconductance (Gm) gate voltage swing (GVS-Gm) of 7 V were gained. At 3.6 GHz load pull measurements with a drain voltage (VDS) of 8 V, the AlN. GC HEMT exhibited a maximum output power density (Pout) of 2.2 W/mm. Two-tone intermodulation distortion measurement further revealed an output third-order intercept point (OIP3) of 35.5 dBm and a corresponding linearity figure of merit (OIP3/PDC) of 11.2 dB. The improved performance can be attributed to the hybrid 2DEG and 3DEG distribution in the channel, where the high density 2DEG contributes to a large output capacity, and the smooth 3DEG facilitates a sustained and stable charge accumulation with bias variation. These results indicate the potential of AlN. GC HEMT in 5G applications that target high power density and high linearity.
- 17 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (7)
An AlN/AlxGa1-xN/GaN graded channel HEMT with enhanced power and linearity performance
In this work, an AlN/AlxGa1-xN/GaN graded channel HEMT (AlN. GC HEMT) with enhanced power and linearity performance has been proposed. With the adoption of a strong-polarized AlN barrier and a graded AlxGa1-xN channel, a current density of 1806 mA/mm and a transconductance (Gm) gate voltage swing (GVS-Gm) of 7 V were gained. At 3.6 GHz load pull measurements with a drain voltage (VDS) of 8 V, the AlN. GC HEMT exhibited a maximum output power density (Pout) of 2.2 W/mm. Two-tone intermodulation distortion measurement further revealed an output third-order intercept point (OIP3) of 35.5 dBm and a corresponding linearity figure of merit (OIP3/PDC) of 11.2 dB. The improved performance can be attributed to the hybrid 2DEG and 3DEG distribution in the channel, where the high density 2DEG contributes to a large output capacity, and the smooth 3DEG facilitates a sustained and stable charge accumulation with bias variation. These results indicate the potential of AlN. GC HEMT in 5G applications that target high power density and high linearity.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2327-2330
High Performance AlN/GaN HEMT for Millimeter-Wave Low-Voltage Applications Fabricated Using Low-Damage Etching
In this paper, an AlN/GaN high electron mobility transistor (HEMT), demonstrating high performance at 30 GHz and low operating voltages is proposed. Benefitting from the novel fluorine-based low-damage etching process introduced in this work, the morphological degradation of the AlN barrier surface has been significantly suppressed after SiN passivation is partially removed in the gate foot region, and oxidation in the gate foot region has been effectively prevented. The fabricated device achieves a maximum drain current density ( I DS.max ) of 1502 mA/mm and a peak transconductance ( g m.max ) of 600 mS/mm. At 30 GHz and V DS of 8 V, a power-added-efficiency (PAE) of 55.63% and an output power density ( P out ) of 2.64 W/mm are achieved. Therefore, low-damage etching can further enhance the performance of AlN/GaN HEMT, which is crucial for millimeter-wave low-voltage applications.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2327-2330
High Performance AlN/GaN HEMT for Millimeter-Wave Low-Voltage Applications Fabricated Using Low-Damage Etching
In this paper, an AlN/GaN high electron mobility transistor (HEMT), demonstrating high performance at 30 GHz and low operating voltages is proposed. Benefitting from the novel fluorine-based low-damage etching process introduced in this work, the morphological degradation of the AlN barrier surface has been significantly suppressed after SiN passivation is partially removed in the gate foot region, and oxidation in the gate foot region has been effectively prevented. The fabricated device achieves a maximum drain current density ( I DS.max ) of 1502 mA/mm and a peak transconductance ( g m.max ) of 600 mS/mm. At 30 GHz and V DS of 8 V, a power-added-efficiency (PAE) of 55.63% and an output power density ( P out ) of 2.64 W/mm are achieved. Therefore, low-damage etching can further enhance the performance of AlN/GaN HEMT, which is crucial for millimeter-wave low-voltage applications.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1421-1427
Evaluation of Power and Linearity at 30 GHz in AlGaN/GaN HEMT Fabricated by Integrating Transistors With Multiple Threshold Voltages
In this work, using the multiple threshold voltages (multi- $\textit{V}_{\text{Ths}}\text{)}$ coupling technology introduces an innovative approach to leverage AlGaN/GaN-based high-electron-mobility transistor (AlGaN/GaN HEMT) for high linearity millimeter-wave (mm-W) applications. As a result of optimizing the etching depth of the recessed trench ( $\textit{H}_\textit{R}$ ), the fabricated composite HEMT demonstrated a remarkably flat transconductance ( $\textit{G}_\textit{m}$ ) plateau, and well-maintained profile of small-signal characteristics as a function of gate voltage. As a consequence, at a biased drain voltage of 10 V and a frequency of 30 GHz, the composite HEMT achieved the highest ratio of output third-order intercept point (OIP3) to DC power consumption ( $\textit{P}_{\text{DC}}\text{)}$ , denoted as (OIP3/ $\textit{P}_{\text{DC}}\text{)}$ , measuring $\sim$ 9.3 dB. Simultaneously optimizing the bias conditions, the devices showcased a remarkable combination of high one-tone saturated output power density reaching 6.5 W/mm and two-tone OIP3/ $\textit{P}_{\text{DC}}$ of $\sim$ 6.1 dB, achieved at a biased drain voltage of 25 V. The experimental results provide compelling evidence of the attractiveness of the multi- $\textit{V}_{\text{Ths}}$ coupling technique for millimeter wave RF transmitters.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1421-1427
Evaluation of Power and Linearity at 30 GHz in AlGaN/GaN HEMT Fabricated by Integrating Transistors With Multiple Threshold Voltages
In this work, using the multiple threshold voltages (multi- $\textit{V}_{\text{Ths}}\text{)}$ coupling technology introduces an innovative approach to leverage AlGaN/GaN-based high-electron-mobility transistor (AlGaN/GaN HEMT) for high linearity millimeter-wave (mm-W) applications. As a result of optimizing the etching depth of the recessed trench ( $\textit{H}_\textit{R}$ ), the fabricated composite HEMT demonstrated a remarkably flat transconductance ( $\textit{G}_\textit{m}$ ) plateau, and well-maintained profile of small-signal characteristics as a function of gate voltage. As a consequence, at a biased drain voltage of 10 V and a frequency of 30 GHz, the composite HEMT achieved the highest ratio of output third-order intercept point (OIP3) to DC power consumption ( $\textit{P}_{\text{DC}}\text{)}$ , denoted as (OIP3/ $\textit{P}_{\text{DC}}\text{)}$ , measuring $\sim$ 9.3 dB. Simultaneously optimizing the bias conditions, the devices showcased a remarkable combination of high one-tone saturated output power density reaching 6.5 W/mm and two-tone OIP3/ $\textit{P}_{\text{DC}}$ of $\sim$ 6.1 dB, achieved at a biased drain voltage of 25 V. The experimental results provide compelling evidence of the attractiveness of the multi- $\textit{V}_{\text{Ths}}$ coupling technique for millimeter wave RF transmitters.
- 9 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1448-1454
Influence of Transverse Geometry of Sidewall Gates on Characteristics of AlGaN/GaN Fin-HEMTs
This article investigates the influence of transverse geometry of sidewall gates on characteristics of AlGaN/GaN Fin-high-electron-mobility transistors (HEMTs) with rectangular HEMTs (RG-HEMTs), divergent HEMTs (DG-HEMTs), and convergent HEMTs (CG-HEMTs) sidewall gate structure. The subthreshold characteristics of the three types of devices have been compared. The pinch-off voltage of the DG-HEMTs and CG-HEMTs exhibits a slightly positive shift compared to RG-HEMTs, indicating that the pinch-off voltage depended on the smallest nanochannel width in Fin-HEMTs. What’s more, the DG-HEMT exhibits a pronounced depletion effect on channel electrons, and an enhanced gate control capability, improving the threshold voltage stability and suppressing the short-channel effects. At the source side in the channel under the gate, a high electron barrier was been observed in the DG-HEMTs, effectively blocking the injection of carriers from the source into the channel as the drain voltage increased. Additionally, at the corner from the assess region to the channel, the DG-HEMTs displayed the fastest potential rise. The effective electron transport has been enhanced in the channel, making it possible to reach an enhanced electron velocity along most of the channel length, leading to a reduced knee voltage. This conclusion has been validated through simulations of Fin-HEMTs with different channel widths. Furthermore, the DG-HEMT delivers improved DE and PAE at V $_{\text{DC}}$ $=$ 9 V.
- 9 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1448-1454
Influence of Transverse Geometry of Sidewall Gates on Characteristics of AlGaN/GaN Fin-HEMTs
This article investigates the influence of transverse geometry of sidewall gates on characteristics of AlGaN/GaN Fin-high-electron-mobility transistors (HEMTs) with rectangular HEMTs (RG-HEMTs), divergent HEMTs (DG-HEMTs), and convergent HEMTs (CG-HEMTs) sidewall gate structure. The subthreshold characteristics of the three types of devices have been compared. The pinch-off voltage of the DG-HEMTs and CG-HEMTs exhibits a slightly positive shift compared to RG-HEMTs, indicating that the pinch-off voltage depended on the smallest nanochannel width in Fin-HEMTs. What’s more, the DG-HEMT exhibits a pronounced depletion effect on channel electrons, and an enhanced gate control capability, improving the threshold voltage stability and suppressing the short-channel effects. At the source side in the channel under the gate, a high electron barrier was been observed in the DG-HEMTs, effectively blocking the injection of carriers from the source into the channel as the drain voltage increased. Additionally, at the corner from the assess region to the channel, the DG-HEMTs displayed the fastest potential rise. The effective electron transport has been enhanced in the channel, making it possible to reach an enhanced electron velocity along most of the channel length, leading to a reduced knee voltage. This conclusion has been validated through simulations of Fin-HEMTs with different channel widths. Furthermore, the DG-HEMT delivers improved DE and PAE at V $_{\text{DC}}$ $=$ 9 V.
- 23 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1383-1386
High-Efficiency Millimeter-Wave Enhancement-Mode Ultrathin-Barrier AlGaN/GaN Fin-HEMT for Low-Voltage Terminal Applications
In this work, high-efficiency millimeter-wave enhancement-mode (E-mode) Fin-high electron mobility transistor (HEMT) is fabricated to satisfy low-voltage terminal applications, whose fabrication process is performed on the in situ SiN passivated ultrathin-barrier AlGaN/GaN heterojunction and features N $_{\text{2}}$ O plasma oxidation treatment on the fins. Specifically, the fabricated E-mode Fin-HEMT exhibits a positive threshold voltage of 0.3 V, at the cost of decreased maximum output current density of 483 mA/mm and lowered peak extrinsic transconductance of 277 mS/mm. Comfortingly, a reduced knee voltage of 1.5 V together with suppressed OFF-state leakage current of 6 $\times$ 10 $^{-\text{6}}$ mA/mm is also obtained for Fin-HEMT. Besides, an OFF-state breakdown voltage of 38 V is achieved, which is sufficiently high to meet the low-voltage RF device’s need for breakdown voltage. Pulsed $\textit{I}$ – $\textit{V}$ measurement shows that a negligible current collapse (CC) is achieved for Fin-HEMT. Additionally, Fin-HEMT demonstrates a good stability by stress reliability test. Subsequently, the $\textit{f}_{\textit{T}}$ / $\textit{f}_{\text{MAX}}$ value of 40/86 GHz is obtained for Fin-HEMT at $\textit{V}_{\text{DS}}$ of 6 V by small signal measurement. Eventually, the millimeter-wave low-voltage load pull measurement shows that the fabricated E-mode Fin-HEMT is able to deliver a decent power added efficiency (PAE) of 55% at 30 GHz and $\textit{V}_{\text{DS}}$ of 6 V, revealing the great potential of the fin configuration combined with ultrathin-barrier AlGaN/GaN heterojunction passivated by in situ SiN and N $_{\text{2}}$ O plasma oxidation treatment in high-efficiency millimeter-wave low-voltage terminal applications.
- 23 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1383-1386
High-Efficiency Millimeter-Wave Enhancement-Mode Ultrathin-Barrier AlGaN/GaN Fin-HEMT for Low-Voltage Terminal Applications
In this work, high-efficiency millimeter-wave enhancement-mode (E-mode) Fin-high electron mobility transistor (HEMT) is fabricated to satisfy low-voltage terminal applications, whose fabrication process is performed on the in situ SiN passivated ultrathin-barrier AlGaN/GaN heterojunction and features N $_{\text{2}}$ O plasma oxidation treatment on the fins. Specifically, the fabricated E-mode Fin-HEMT exhibits a positive threshold voltage of 0.3 V, at the cost of decreased maximum output current density of 483 mA/mm and lowered peak extrinsic transconductance of 277 mS/mm. Comfortingly, a reduced knee voltage of 1.5 V together with suppressed OFF-state leakage current of 6 $\times$ 10 $^{-\text{6}}$ mA/mm is also obtained for Fin-HEMT. Besides, an OFF-state breakdown voltage of 38 V is achieved, which is sufficiently high to meet the low-voltage RF device’s need for breakdown voltage. Pulsed $\textit{I}$ – $\textit{V}$ measurement shows that a negligible current collapse (CC) is achieved for Fin-HEMT. Additionally, Fin-HEMT demonstrates a good stability by stress reliability test. Subsequently, the $\textit{f}_{\textit{T}}$ / $\textit{f}_{\text{MAX}}$ value of 40/86 GHz is obtained for Fin-HEMT at $\textit{V}_{\text{DS}}$ of 6 V by small signal measurement. Eventually, the millimeter-wave low-voltage load pull measurement shows that the fabricated E-mode Fin-HEMT is able to deliver a decent power added efficiency (PAE) of 55% at 30 GHz and $\textit{V}_{\text{DS}}$ of 6 V, revealing the great potential of the fin configuration combined with ultrathin-barrier AlGaN/GaN heterojunction passivated by in situ SiN and N $_{\text{2}}$ O plasma oxidation treatment in high-efficiency millimeter-wave low-voltage terminal applications.