BABasheer Al-Anesi

Basheer Al-Anesi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Basheer Al-Anesi has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pyridine-Based Multifunctional Surface Passivators Enable Efficient and Stable Perovskite Indoor Photovoltaics

    by Yi Han, Ceylan Doyranli, Alessia Di Vito, Matthias Auf der Maur, Mokurala Krishnaiah, Paavo Mäkinen, Ramesh Kumar, Basheer Al-Anesi, Debjit Manna, Paola Vivo

    Efficient surface passivation is crucial for mitigating defect-induced recombination losses in perovskite-based indoor photovoltaics (IPVs), where charge carrier dynamics are particularly sensitive to trap states under low-intensity illumination. Here, we introduce two pyridine-based passivators, tris[4-(pyridin-4-yl)phenyl]amine (TPAP) and its ionic counterpart (TPAP1), to achieve high-performance and stable perovskite IPVs. These passivators strongly coordinate with under-coordinated Pb2+ ions, effectively reducing trap densities and improving hydrophobicity. When incorporated into lead-based triple-cation CsFAMA perovskite films, TPAP and TPAP1 significantly suppress nonradiative recombination, leading to notable improvements in device performance. Remarkably, TPAP1 demonstrates a unique ability to simultaneously passivate multiple defect types, further optimizing charge transport and boosting the open-circuit voltage (VOC). As a result, IPV devices incorporating TPAP and TPAP1 achieved remarkable indoor power conversion efficiencies of 30.1% and 31.7%, with VOC values of 0.97 and 1.00 V, respectively, under 1000 lux white LED illumination. This study presents a scalable and effective strategy for defect passivation in perovskite IPVs, highlighting the critical role of multifunctional organic passivators in advancing next-generation energy harvesting technologies.


  • Synergistic Halogen‐Bonding Passivation and Carboxylic Acid Anchoring in Carbazole‐Based Hole‐Transport Materials Enhance Performance and Stability of p–i–n Perovskite Solar Cells

    by Paavo Mäkinen, Yi Han, Giulio Koch, Mingchen Xie, Amit Tewari, Alessia Di Vito, Matthias Auf der Maur, Basheer Al‐Anesi, Akhil Alexander, Noora Lamminen, et al.

    Interfaces pose significant challenges to the performance and stability of perovskite solar cells (PSCs), as defects and weak interactions at these boundaries can lead to energy losses and degradation. To address these issues, it is crucial to functionalize hole transport materials (HTMs) to effectively manage interfacial defects and enhance charge transfer. This study introduces a carbazole‐based hole transport layer (TC‐ICA) that leverages halogen bonding (XB) for enhanced interface passivation with the perovskite layer and carboxylic group anchoring to the indium‐doped tin oxide (ITO). By combining these functionalities, the TC‐ICA material leads to exceptional device stability (99% shelf stability over 320 days of air storage and a T80‐lifetime exceeding 1000 h under light soaking) and enhanced efficiency (15.4%), outperforming single‐function materials like TC‐CA (14.7%) and TC‐I (10.7%). This dual‐function strategy marks a significant advancement in the quest for high‐performance and long‐term stable PSCs.


  • Open Access

    Solution‐Processed Tin‐Antimony Quaternary Chalcohalides for Self‐Powered Broadband Photodetectors

    by Debjit Manna, Krishnaiah Mokurala, G. Krishnamurthy Grandhi, Basheer Al‐Anesi, Noolu Srinivasa Manikanta Viswanath, Vipinraj Sugathan, Amit Tewari, Ceylan Doyranli, Paola Vivo

    The mixed‐metal quaternary chalcohalides of group IV and V elements are a promising class of low‐toxicity perovskite‐inspired materials with tunable bandgaps and desirable defect tolerance. Sn2SbS2I3 is known for its broadband absorption, low exciton binding energy, ambient stability, and solution processability in thin films. However, its use in optoelectronic devices has so far been only limited to solar cells. In this work, the first self‐powered photodetectors based on Sn2SbS2I3 thin films, sandwiched in an n–i–p device configuration are reported. The insertion of an interlayer at the hole‐transport layer/gold top‐electrode interface reduces the dark current and improves the device performance. The high external quantum efficiency of the devices in the range of 350−900 nm hints to a broadband spectral photoresponsivity. The devices indeed exhibit promising photodetection properties, namely a photoresponsivity of 0.33 A W−1, a specific detectivity of 1.55 × 1012 Jones, and photoresponse/decay times of 0.52 and 0.45 s at zero bias voltage. These results, combined with the excellent operational stability of the photodetectors, encourage the exploration of a wide range of practical light‐sensing applications for quaternary chalcohalides and stimulate device and material engineering to further enhance photodetection across the UV‐Visible‐NIR spectrum.


  • Open Access

    Enhancing Charge Transfer in Perovskite‐Inspired Silver Iodobismuthate‐Based Solar Cells via Cesium Iodide Interlayer

    by Basheer Al‐Anesi, Vipinraj Sugathan, Joshua K. G. Karlsson, Amit Tewari, Roshan Nasare, Paavo Mäkinen, Debjit Manna, Matti Mäntysalo, Paola Vivo

    Ag3BiI6 (ABI) is one of the most widely explored lead‐free perovskite‐inspired materials for eco‐friendly solar cell applications. However, despite the intense research efforts, the photovoltaic performance of ABI‐based devices remains very modest, primarily due to poor film morphology and ineffective charge extraction. This work aims at investigating the potential benefits of a thermally evaporated cesium iodide (CsI) interlayer on the performance of ABI‐based solar cells. Upon the addition of CsI atop the ABI layer in the device stack, the solar cells deliver a power conversion efficiency (PCE) of 2.27%. This is the highest efficiency reported for ABI solar cells employing a similar device architecture. It is found that the enhancement in PCE is largely due to improvement in the ABI|hole transport layer interface upon the introduction of CsI interlayer. The improvement is largely ascribed to enhanced surface coverage upon introduction of CsI interlayer, as evidenced by our comprehensive microscopy studies. Furthermore, impedance spectroscopy analysis is employed to provide further insights into the changes in charge transfer dynamics interlayer that dictate the enhancement of fill factor and short‐circuit current density in the devices. The findings indicate that the addition of CsI promotes charge transfer and minimizes recombination losses.


  • Open Access

    Dissecting the Role of the Hole-Transport Layer in Cu2 AgBiI6 Solar Cells: An Integrated Experimental and Theoretical Study

    by Basheer Al-Anesi, G. Krishnamurthy Grandhi, Adriana Pecoraro, Vipinraj Sugathan, Ana Belén Muñoz-García, Michele Pavone, Paola Vivo


  • Open Access

    Improving the Efficiency and Stability of Perovskite Solar Cells by Refining the Perovskite-Electron Transport Layer Interface and Shielding the Absorber from UV Effects

    by Salah Al-Shujaa, Peng Zhao, Dingqian He, Basheer Al-Anesi, Yaqing Feng, Jianxing Xia, Bao Zhang, Yi Zhang

    This study aims to enhance the performance of perovskite solar cells (PSCs) by optimizing the interface between the perovskite and electron transport layers (ETLs). Additionally, we plan to protect the absorber layer from ultraviolet (UV) degradation using a ternary oxide system comprising SnO2, strontium stannate (SrSnO3), and strontium oxide (SrO). In this structure, the SnO2 layer functions as an electron transport layer, SrSnO3 acts as a layer for UV filtration, and SrO is employed to passivate the interface. SrSnO3 is characterized by its chemical stability, electrical conductivity, extensive wide band gap energy, and efficient absorption of UV radiation, all of which significantly enhance the photostability of PSCs against UV radiation. Furthermore, incorporating SrSnO3 into the ETL improves its electronic properties, potentially raising the energy level and improving alignment, thereby enhancing the electron transfer from the perovskite layer to the external circuit. Integrating SrO at the interface between the ETL and perovskite layer reduces interface defects, thereby reducing charge recombination and improving electron transfer. This improvement results in higher solar cell efficiency, reduced hysteresis, and extended device longevity. The benefits of this method are evident in the observed improvements: a noticeable increase in open-circuit voltage (Voc) from 1.12 to 1.16 V, an enhancement in the fill factor from 79.4 to 82.66%, a rise in the short-circuit current density (Jsc) from 24.5 to 24.9 mA/cm2 and notably, a marked improvement in the power conversion efficiency (PCE) of PSCs, from 21.79 to 24.06%. Notably, the treated PSCs showed only a slight decline in PCE, reducing from 24.15 to 22.50% over nearly 2000 h. In contrast, untreated SnO2 perovskite devices experienced a greater decline, with efficiency decreasing from 21.79 to 17.83% in just 580 h.


  • Open Access

    Halide Perovskites for Photoelectrochemical Water Splitting and CO2 Reduction: Challenges and Opportunities

    by Krzysztof Bienkowski, Renata Solarska, Linh Trinh, Justyna Widera-Kalinowska, Basheer Al-Anesi, Maning Liu, G. Krishnamurthy Grandhi, Paola Vivo, Burcu Oral, Beyza Yılmaz, et al.

    Photoelectrochemical water splitting and CO2 reduction provide an attractive route to produce solar fuels while reducing the level of CO2 emissions. Metal halide perovskites (MHPs) have been extensively studied for this purpose in recent years due to their suitable optoelectronic properties. In this review, we survey the recent achievements in the field. After a brief introduction to photoelectrochemical (PEC) processes, we discussed the properties, synthesis, and application of MHPs in this context. We also survey the state-of-the-art findings regarding significant achievements in performance, and developments in addressing the major challenges of toxicity and instability toward water. Efforts have been made to replace the toxic Pb with less toxic materials like Sn, Ge, Sb, and Bi. The stability toward water has been also improved by using various methods such as compositional engineering, 2D/3D perovskite structures, surface passivation, the use of protective layers, and encapsulation. In the last part, considering the experience gained in photovoltaic applications, we provided our perspective for the future challenges and opportunities. We place special emphasis on the improvement of stability as the major challenge and the potential contribution of machine learning to identify the most suitable formulation for halide perovskites with desired properties.


  • Open Access

    Lead-free perovskite-inspired semiconductors for indoor light-harvesting – the present and the future

    by G. Krishnamurthy Grandhi, Lethy Krishnan Jagadamma, Vipinraj Sugathan, Basheer Al-Anesi, Debjit Manna, Paola Vivo

    Perovskite-inspired absorbers are promising for sustainable indoor light-harvesting. Defect mitigation and device operational stability need attention to accelerate the development of air-stable and low-toxicity photovoltaics.


  • Open Access

    Role of Self-Trapped Excitons in the Broadband Emission of Lead-Free Perovskite-Inspired Cu2AgBiI6

    by G. Krishnamurthy Grandhi, Rakesh Dhama, Noolu Srinivasa Manikanta Viswanath, Ekaterina S. Lisitsyna, Basheer Al-Anesi, Jayanta Dana, Vipinraj Sugathan, Humeyra Caglayan, Paola Vivo

    The perovskite-inspired Cu2AgBiI6 (CABI) absorber shows promise for low-toxicity indoor photovoltaics. However, the carrier self-trapping in this material limits its photovoltaic performance. Herein, we examine the self-trapping mechanism in CABI by analyzing the excited-state dynamics of its absorption band at 425 nm, which is responsible for the self-trapped exciton emission, using a combination of photoluminescence and ultrafast transient absorption spectroscopies. Photoexcitation in CABI rapidly generates charge carriers in the silver iodide lattice sites, which localize into the self-trapped states and luminesce. Furthermore, a Cu-Ag-I-rich phase that exhibits similar spectral responses as CABI is synthesized, and a comprehensive structural and photophysical study of this phase provides insights into the nature of the excited states of CABI. Overall, this work explains the origin of self-trapping in CABI. This understanding will play a crucial role in optimizing its optoelectronic properties. It also encourages compositional engineering as the key to suppressing self-trapping in CABI.


  • Open Access

    Less Is More: Simplified Fluorene-Based Dopant-Free Hole Transport Materials Promote the Long-Term Ambient Stability of Perovskite Solar Cells

    by Paavo Mäkinen, Francesca Fasulo, Maning Liu, G. Krishnamurthy Grandhi, Daniele Conelli, Basheer Al-Anesi, Harri Ali-Löytty, Kimmo Lahtonen, Sami Toikkonen, Gian Paolo Suranna, et al.