NKNamgyu Kim

Namgyu Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Namgyu Kim has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Insights into the Adsorption Performance of Emerging Contaminants on Granular Activated Carbon

    by Sang-Hoon Lee, Namgyu Kim, Donghee Park

    Emerging contaminants are being detected at a high frequency, posing significant environmental and human health challenges. This study aimed to investigate the potential of using commercial granular activated carbon for adsorbing nine aqueous emerging contaminants (carbamazepine, phenacetin, pentoxifylline, norfloxacin, iprobenfos, isoprothiolane, metolachlor, tebuconazole, and hexaconazole). The adsorption study involved employing kinetic and isotherm models, using various concentrations of emerging contaminants and sorbents in a batch system. Additionally, the study explored the correlation between the characteristics of emerging contaminants and their adsorption values, which displayed a relatively linear relationship. While some previous papers have evaluated the performance of one or two substances, there is a lack of research on the adsorption mechanisms of all nine aqueous emerging contaminants. Therefore, the findings from this study on the adsorption potential of granular activated carbon can serve as a valuable foundation for further investigations into its effectiveness in adsorbing emerging contaminants.


  • Open Access

    Superior Removal of Toxic Cr(VI) from Wastewaters by Natural Pine Bark

    by Hanui Yang, Namgyu Kim, Donghee Park

    Hexavalent chromium (Cr(VI)) is one of the most toxic heavy metals found in industrial wastewater, so many researchers are working to develop efficient and environmentally friendly removal methods. It has been reported that natural biomass and its derivatives can be used to treat wastewaters containing Cr(VI). However, biomass with sufficient Cr(VI) removal performance to replace the existing chemical method, which is cheap and simple, has not been reported yet. This study reports that inexpensive, abundant, and commercially available pine bark has the highest Cr(VI) removal capacity (i.e., 376.3 mg/g) compared to biomass reported elsewhere. This value is six times higher than the theoretical value of an inorganic reducing agent (iron(II) sulfate heptahydrate). The main mechanism of Cr(VI) removal by pine bark was clearly identified through kinetic experiments, Fourier-transform infrared spectrometer, and X-ray photoelectron spectroscopy analyses, which were used to study the compositions, functional groups, and bonding states of pine bark. It was found that pine bark consists of various acidic functional groups that can act as electron donors to promote the removal of Cr(VI) through redox reactions. In conclusion, pine bark may be a promising candidate for the removal of Cr(VI) from wastewater, owing to its excellent removal capacity.


  • Open Access

    Potentiality of Rod-Type Chitosan Adsorbent Derived from Sewage Sludge

    by Ji Hae Seo, Namgyu Kim, Munsik Park, Donghee Park

    The potential use of wastewater sludge as a biosorbent for the removal of various metals and metalloids from aqueous solutions was investigated. The sludge was immobilized in a rod shape with chitosan to improve sorption capacity and solid–liquid separation ability. An optimal condition for the production of rod-shaped chitosan-immobilized sludge (RCS) was determined by considering the biosorbent production potential and As(V) removal efficiency. The optimal sludge and chitosan contents and RCS thickness were 6.0%, 4.0%, and 0.2–0.3 mm, respectively. The anion removal performance of RCS was investigated for As(V), Cr(VI), and Mn(VII), and the cation removal performance was investigated for Cd(II). Pseudo-first-order and pseudo-second-order models adequately explained the kinetic data for the RCS, while the Langmuir and Freundlich models explained the equilibrium data for the RCS. These results showed that RCS has a higher adsorption capacity for anions than for cations. The results also indicated that electrostatic attraction or ion exchange is the main mechanism for metal/metalloid removal by RCS, except for the case of Mn(VII) where an adsorption-coupled reduction mechanism may be suggested.


  • Open Access

    Mechanism of Permanganate Biosorption by Fermentation Biowaste

    by Namgyu Kim, Sang-Hoon Lee, Hanui Yang, Donghee Park

    Biosorptive treatment of industrial wastewater contaminated with heavy metals has been recognized as one of the most effective green tools, competing with traditional physical/chemical treatment processes. This study delves into the detailed investigation of the biosorbent prepared from fermentation biowaste, particularly focusing on the mechanism behind permanganate (Mn(VII)) removal. Various parameters including pH, biosorbent dosage, initial concentration, and temperature were examined. Among these factors, solution pH emerged as the most crucial in removing Mn(VII) using the biosorbent. The significant removal of Mn(VII) was attributed to both reduction and adsorption, as confirmed by X-ray photoelectron spectroscopy. Depending on the experimental conditions, the removal of Mn(VII) was influenced not only by simple adsorption but also by oxidation-reduction and precipitation processes. This study not only advances our understanding of biosorptive treatment but also highlights the promising potential of fermentation biowaste-based biosorbents for effective Mn(VII) removal.


  • Open Access

    Potential of Adsorption of Diverse Environmental Contaminants onto Microplastics

    by Chaehwi Lim, Namgyu Kim, Junho Lee, Yeojoon Yoon

    Microplastics are regarded as vectors of hazardous contaminants due to their ability to adsorb xenobiotic chemicals. This has led to increased interest in the risk of previously neglected microplastic contaminants in the aquatic environment. Here, we assessed the possibility of transferring chemical contaminants to microplastics by evaluating the adsorption performance of (in)organic pollutants on various types of microplastics (polystyrene, PS; polyethylene terephthalate, PET; high-density polyethylene, HDPE; and low-density polyethylene, LDPE;). Considering the toxicity and polarity of each pollutant, dyes (BB9 and RR120) and heavy metals (Cd(II), Pb(II), As(III), and As(V)) were selected for the adsorption experiments. Dye was found to be adsorbed through physical adsorption. The adsorption capacity of microplastics for RR120 and BB9 was the highest for HDPE-1 and LDPE-1, respectively. Additionally, the smaller the size of the microplastics, the higher the adsorbed amounts. The main adsorption mechanism of heavy metals was found to be through physical and chemical adsorption. And adsorption mechanism of dye depends on physical adsorption. Thus, the adsorption of microplastic contaminants was affected more by the condition than by the type of microplastics.