ZWZhixiang Wang

Zhixiang Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhixiang Wang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Vanadium–Titanium Magnetite Concentrate, Calcium–Magnesium Composite Roasting and Sulfuric Acid Leaching for Vanadium Extraction from Pellets

    by Zhonghui Peng, Zhixiang Wang, Zhongchen Han, Yongze Zhu, Yang Li, Keqiang Xie

    This paper investigated a pellet ore production process in which vanadium was extracted from vanadium and titanium magnetite concentrates using sulfuric acid leaching. Calcium and magnesium were added to the iron ore concentrate during pellet production to produce calcium vanadate and magnesium vanadate after roasting. The pellets were leached with sulfuric acid solution to extract V5+. The resulting pellets had a compressive strength of 3375 N after primary roasting, a good pellet morphology after acid leaching, and simple liquid–solid separation. Under the optimal experimental conditions, the vanadium leaching rate in the pellets reached 77.86%, while the iron leaching rate was only 1.17%. The pellets did not fragment, which was an improvement upon existing vanadium extraction methods. The strength of the pellets after vanadium extraction decreased to 563 N, but after secondary roasting, the compressive strength of the pellets reached 2578 N, which was suitable for blast furnace ironmaking. The roasting and acid leaching experiments showed that the vanadium extraction process resulted in suitable pellet properties. The use of low compound additives can effectively improve the leaching effect, while avoiding the previous problems of too many additives, pellet iron grade reduction, or the pursuit of high vanadium extraction rate pellet breakage and serious high secondary use process costs.


  • Open Access

    Study on the Properties of Vanadium Pellets Extracted from Vanadium Titanium Magnetite Concentrate by Calcium Roasting and Acid Leaching

    by Yang Li, Zhonghui Peng, Zhixiang Wang, Yongze Zhu, Keqiang Xie

    In this study, a clean pellet production method of calcium roasting and sulfuric acid leaching of vanadium from vanadium and titanium magnetite concentrates is proposed, which can effectively separate vanadium and iron, and the pellets after acid leaching and vanadium extraction can be used as raw material for iron making after secondary roasting. During the experiment, only 2% Ca(OH)2 was added as the calcifier to make pellets, and vanadium was extracted by acid leaching after calcination. Under the optimum conditions, the vanadium leaching rate was 74.51%, and the iron leaching rate was only 1.05%. After secondary roasting, the compressive strength of the pellets was 2358 N, and the qualification rate was 97%. Additionally, after acid leaching and vanadium extraction, the impurities in the pellet were partially removed, and the iron content of the pellet increased by 6.6%, which is more conducive to subsequent ironmaking. The roasting and acid leaching experiments show that based on the production of iron smelting pellets, the use of pellets can better extract vanadium from the titanium magnetite concentrate, while avoiding the problems of excessive additives to reduce the iron grade of pellets. Or the pursuit of high vanadium extraction rate pellets, which can be seriously damaged and difficult to use later. This process can perform a comprehensive utilization of vanadium titanium magnetite, and has certain guiding significance for industrial production.


  • Open Access

    Selective Leaching of Vanadium from Calcification-Roasted Pellets of Vanadium–Titanium–Iron Concentrate by a Cyclic Two-Stage Sulfuric Acid Process

    by Zhonghui Peng, Zhixiang Wang, Yang Li, Yongze Zhu, Keqiang Xie

    Here, a process for leaching vanadium from calcified roasting pellets (CPVC) of vanadium–titanium-iron concentrate by a two-stage sulfuric acid cycle was proposed. The first stage of leaching was mainly for the removal of silicon from the pellet and leaching solution. After the second stage, the total leaching rates of vanadium and iron were 75.52% and 0.71%, respectively. The concentration of vanadium in the leaching solution reached 6.80 g/L, which can subsequently direct a vanadium precipitation process without extraction and enrichment. After the second roasting, the crushing strength of the pellets reached 2250 N, which met the requirement for blast furnace iron making. The Eh-pH diagrams of the V-Fe-H2O system at different temperatures were plotted. Thermodynamically, it was difficult to selectively leach vanadium and iron by changing the conventional acid leaching conditions. In addition, the pellets before and after leaching were analyzed. The grade of iron in the pellets increased slightly after leaching, and the main phases in the pellets remained as Fe2O3 and Fe9TiO15. The S in the sulfuric acid solution entered the leached pellets during the acid leaching reaction and was removed by the second roasting of the leached pellets.