Muharrem Kilinc
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Muharrem Kilinc has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Franz Kärtner
University of Hamburg
10 shared publications - Umit Demirbas
Paul Scherrer Institut
9 shared publications Franz Kaertner
7 shared publicationsJelto Thesinga
7 shared publicationsMartin Kellert
7 shared publications- Mikhail Pergament
Department of Physics, Universitat Hamburg, Jungiusstr. 9, 20355 Hamburg, Germany
7 shared publications
Latest Publications
- Open Access
- 30 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Zero-PDG silicon photonic amplifier with high saturation power and low noise figure
High-power amplifiers are of great importance in many optical systems deployed in optical sensing, ranging, medical surgery and more. Likewise, high-gain, low-noise amplifiers with low polarization dependence are critical components of long-range optical communication systems. Integrated photonic solutions show great potential in challenging application fields thanks to their drastic reduction in size, weight and cost, but coming at the expense of low optical power due to reduced energy storage capacity in small devices. Recently, the large mode area (LMA) technology, which is known for dramatically increasing the energy storage capacity and saturation power of fiber amplifiers, has been brought to the chip-level, allowing for watt-level amplification directly from the chip. Here we demonstrate a silicon photonic LMA amplifier capable of both high-power amplification with output saturation powers > 115 mW and high small-signal gain up to 30 dB with a 3.6 dB noise figure on-chip, which we achieved by suppressing parasitic lasing with index-matching glue on the chip facets. Furthermore, we present a method to tune and completely nullify the polarization dependent gain (PDG). We believe that the PDG-tunability combined with the low-noise, high-gain and high-power amplification positions it as a potentially disruptive technology for next-generation integrated amplifiers across a range of applications.
- 30 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessZero-PDG silicon photonic amplifier with high saturation power and low noise figure
High-power amplifiers are of great importance in many optical systems deployed in optical sensing, ranging, medical surgery and more. Likewise, high-gain, low-noise amplifiers with low polarization dependence are critical components of long-range optical communication systems. Integrated photonic solutions show great potential in challenging application fields thanks to their drastic reduction in size, weight and cost, but coming at the expense of low optical power due to reduced energy storage capacity in small devices. Recently, the large mode area (LMA) technology, which is known for dramatically increasing the energy storage capacity and saturation power of fiber amplifiers, has been brought to the chip-level, allowing for watt-level amplification directly from the chip. Here we demonstrate a silicon photonic LMA amplifier capable of both high-power amplification with output saturation powers > 115 mW and high small-signal gain up to 30 dB with a 3.6 dB noise figure on-chip, which we achieved by suppressing parasitic lasing with index-matching glue on the chip facets. Furthermore, we present a method to tune and completely nullify the polarization dependent gain (PDG). We believe that the PDG-tunability combined with the low-noise, high-gain and high-power amplification positions it as a potentially disruptive technology for next-generation integrated amplifiers across a range of applications.
- Open Access
- 28 May 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (11) , 20724-20741
Numerical modeling and optimization of gain dynamics in Yb 3+ doped YLF and YAG cryogenically cooled amplifiers
A chromatic numerical model is presented for simulating gain dynamics in solid-state laser amplifiers. The model is based on a system of rate equations and incorporates key physical effects, including pump saturation, focused beam propagation inside the gain element, and the temperature and wavelength-dependent properties of the gain medium. By accounting for the wavelength-dependent gain, the model enables a detailed analysis of the seed pulse spectral evolution during amplification, which directly influences the duration of the Fourier-transform-limited pulse after compression. The model performance is demonstrated through simulations of cryogenically cooled amplifiers based on Yb:YLF and Yb:YAG gain materials.
- 28 May 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (11) , 20724-20741
Open AccessNumerical modeling and optimization of gain dynamics in Yb 3+ doped YLF and YAG cryogenically cooled amplifiers
A chromatic numerical model is presented for simulating gain dynamics in solid-state laser amplifiers. The model is based on a system of rate equations and incorporates key physical effects, including pump saturation, focused beam propagation inside the gain element, and the temperature and wavelength-dependent properties of the gain medium. By accounting for the wavelength-dependent gain, the model enables a detailed analysis of the seed pulse spectral evolution during amplification, which directly influences the duration of the Fourier-transform-limited pulse after compression. The model performance is demonstrated through simulations of cryogenically cooled amplifiers based on Yb:YLF and Yb:YAG gain materials.
- Open Access
- 1 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 51782-51798
Diode-pumped continuous-wave Yb:YVO 4 laser with a broad tuning range of 986 to 1119 nm
We present a diode-pumped continuous-wave (CW) Yb:YVO 4 laser exhibiting wavelength tunability from 986 nm to 1119 nm, corresponding to a broad tuning range of 133 nm, one of the widest reported for any Yb-doped laser host. This performance was achieved by employing a low-loss, off-surface optic-axis birefringent filter, high-quality laser crystals, and optimized low-loss cavity optics, enabling smooth and stable wavelength tuning along both principal polarization axes (E//a: 986-1084 nm and E//c: 995-1119 nm). The system delivers CW output powers up to 3.75 W, with slope and optical-to-optical efficiencies reaching 70% and 48%, respectively. These results highlight Yb:YVO 4 as an attractive gain medium for applications requiring broad tunability, compactness, and efficiency, such as ultrafast pulse generation, broadband spectroscopy, and high-energy amplifier seeding.
- 1 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 51782-51798
Open AccessDiode-pumped continuous-wave Yb:YVO 4 laser with a broad tuning range of 986 to 1119 nm
We present a diode-pumped continuous-wave (CW) Yb:YVO 4 laser exhibiting wavelength tunability from 986 nm to 1119 nm, corresponding to a broad tuning range of 133 nm, one of the widest reported for any Yb-doped laser host. This performance was achieved by employing a low-loss, off-surface optic-axis birefringent filter, high-quality laser crystals, and optimized low-loss cavity optics, enabling smooth and stable wavelength tuning along both principal polarization axes (E//a: 986-1084 nm and E//c: 995-1119 nm). The system delivers CW output powers up to 3.75 W, with slope and optical-to-optical efficiencies reaching 70% and 48%, respectively. These results highlight Yb:YVO 4 as an attractive gain medium for applications requiring broad tunability, compactness, and efficiency, such as ultrafast pulse generation, broadband spectroscopy, and high-energy amplifier seeding.
- Open Access
- 2 January 2025
- Published by Springer Nature in Light: Science & Applications
- Vol. 14 (1) , 1-9
Sub-2W tunable laser based on silicon photonics power amplifier
High-power tunable lasers are intensely pursued due to their vast application potential such as in telecom, ranging, and molecular sensing. Integrated photonics, however, is usually considered not suitable for high-power applications mainly due to its small size which limits the energy storage capacity and, therefore, the output power. In the late 90s, to improve the beam quality and increase the stored energy, large-mode-area (LMA) fibers were introduced in which the optical mode area is substantially large. Such LMA fibers have transformed the high-power capability of fiber systems ever since. Introducing such an LMA technology at the chip-scale can play an equally disruptive role with high power signal generation from an integrated photonics system. To this end, in this work we demonstrate such a technology, and show a very high-power tunable laser with the help of a silicon photonics based LMA power amplifier. We show output power reaching 1.8 W over a tunability range of 60 nm, spanning from 1.83 µm to 1.89 µm, limited only by the seed laser. Such an integrated LMA device can be used to substantially increase the power of the existing integrated tunable lasers currently limited to a few tens of milliwatts. The power levels demonstrated here reach and surpass that of many benchtop systems which truly makes the silicon photonics based integrated LMA device poised towards mass deployment for high power applications without relying on benchtop systems.
- 2 January 2025
- Published by Springer Nature in Light: Science & Applications
- Vol. 14 (1) , 1-9
Open AccessSub-2W tunable laser based on silicon photonics power amplifier
High-power tunable lasers are intensely pursued due to their vast application potential such as in telecom, ranging, and molecular sensing. Integrated photonics, however, is usually considered not suitable for high-power applications mainly due to its small size which limits the energy storage capacity and, therefore, the output power. In the late 90s, to improve the beam quality and increase the stored energy, large-mode-area (LMA) fibers were introduced in which the optical mode area is substantially large. Such LMA fibers have transformed the high-power capability of fiber systems ever since. Introducing such an LMA technology at the chip-scale can play an equally disruptive role with high power signal generation from an integrated photonics system. To this end, in this work we demonstrate such a technology, and show a very high-power tunable laser with the help of a silicon photonics based LMA power amplifier. We show output power reaching 1.8 W over a tunability range of 60 nm, spanning from 1.83 µm to 1.89 µm, limited only by the seed laser. Such an integrated LMA device can be used to substantially increase the power of the existing integrated tunable lasers currently limited to a few tens of milliwatts. The power levels demonstrated here reach and surpass that of many benchtop systems which truly makes the silicon photonics based integrated LMA device poised towards mass deployment for high power applications without relying on benchtop systems.
- Open Access
- 11 September 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (18) , 5236-5239
Pushing the tuning limits of femtosecond Yb-based solid-state lasers to 1 µm: a Yb:YVO4 laser tunable down to 1004 nm
We have obtained what we believe to be the shortest fs tuning wavelength (1004 nm) from a Yb-based solid-state laser system. As the working horse, we have chosen Yb:YVO4 due to its blueshifted gain spectrum. While using a single 10 W 952 nm diode for pumping and a semiconductor saturable absorber mirror (SESAM) for mode-locking, we have achieved 266 fs long pulses with up to 1.24 W of output power around 1021 nm. Using an intracavity birefringent filter, the central wavelength of the fs pulses could be tuned smoothly between 1004–1038 nm and 1009–1061 nm while employing the E//a and E//c axis of the material, respectively. By using an additional hard aperture to increase the modulation depth, we have also attained 100 fs level pulses in the 1012.5–1019 nm range, which shows the suitability of the system in seeding cryogenic Yb:YLF-based amplifiers.
- 11 September 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (18) , 5236-5239
Open AccessPushing the tuning limits of femtosecond Yb-based solid-state lasers to 1 µm: a Yb:YVO4 laser tunable down to 1004 nm
We have obtained what we believe to be the shortest fs tuning wavelength (1004 nm) from a Yb-based solid-state laser system. As the working horse, we have chosen Yb:YVO4 due to its blueshifted gain spectrum. While using a single 10 W 952 nm diode for pumping and a semiconductor saturable absorber mirror (SESAM) for mode-locking, we have achieved 266 fs long pulses with up to 1.24 W of output power around 1021 nm. Using an intracavity birefringent filter, the central wavelength of the fs pulses could be tuned smoothly between 1004–1038 nm and 1009–1061 nm while employing the E//a and E//c axis of the material, respectively. By using an additional hard aperture to increase the modulation depth, we have also attained 100 fs level pulses in the 1012.5–1019 nm range, which shows the suitability of the system in seeding cryogenic Yb:YLF-based amplifiers.
- 23 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 2986-2989
Dual-wavelength synchronously mode-locked Cr:LiSAF laser with a tunable beating frequency and a central wavelength
We demonstrate a versatile dual-wavelength synchronous mode-locking of a diode-pumped Cr:LiSAF laser for the first time, to our knowledge. A two-color mode-locked operation is achieved by using intracavity birefringent filters (BRFs) or etalons as frequency-selective elements. Using filters with different thicknesses and hence different free spectral ranges (FSRs), wavelength separation in two-color mode-locking could be selected between 1 and 9 nm, with corresponding beating frequencies in the 0.4–3.5 THz range. Moreover, the central wavelength of the two-color output could be tuned smoothly between 840 and 875 nm, only limited by the bandwidth of the semiconductor saturable absorber mirror (SESAM) used for mode-locking. The method, which enables easy adjustment of the central wavelength and beating frequency of a dual-wavelength operation, is suitable for use in other laser gain media as well.
- 23 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 2986-2989
Dual-wavelength synchronously mode-locked Cr:LiSAF laser with a tunable beating frequency and a central wavelength
We demonstrate a versatile dual-wavelength synchronous mode-locking of a diode-pumped Cr:LiSAF laser for the first time, to our knowledge. A two-color mode-locked operation is achieved by using intracavity birefringent filters (BRFs) or etalons as frequency-selective elements. Using filters with different thicknesses and hence different free spectral ranges (FSRs), wavelength separation in two-color mode-locking could be selected between 1 and 9 nm, with corresponding beating frequencies in the 0.4–3.5 THz range. Moreover, the central wavelength of the two-color output could be tuned smoothly between 840 and 875 nm, only limited by the bandwidth of the semiconductor saturable absorber mirror (SESAM) used for mode-locking. The method, which enables easy adjustment of the central wavelength and beating frequency of a dual-wavelength operation, is suitable for use in other laser gain media as well.
- Open Access
- 10 May 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (6) , 1499-1508
Fractional thermal load in cryogenically cooled Yb:YLF and Yb:YAG lasers
We present a method for the direct measurement of the fractional thermal load (FTL) in cryogenically cooled laser crystals. The experimental methodology involves characterizing the liquid nitrogen evaporation rate in a dewar containing the laser crystals, allowing for the accurate determination of FTL. The FTL is measured to be 1.7 × quantum defect (QD) for Yb:YLF and 1.5 × QD for Yb:YAG under continuous wave lasing conditions. The measured FTL values are then used to calculate the temperature distribution inside the crystals as a function of pump power, and the simulation results are found to be in very good agreement with the in-situ temperature measurements using contactless optical luminescence thermometry. The method and findings presented in this work hold great potential to benefit laser engineers and scientists working with cryogenic lasers to address and overcome temperature-dependent handicaps.
- 10 May 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (6) , 1499-1508
Open AccessFractional thermal load in cryogenically cooled Yb:YLF and Yb:YAG lasers
We present a method for the direct measurement of the fractional thermal load (FTL) in cryogenically cooled laser crystals. The experimental methodology involves characterizing the liquid nitrogen evaporation rate in a dewar containing the laser crystals, allowing for the accurate determination of FTL. The FTL is measured to be 1.7 × quantum defect (QD) for Yb:YLF and 1.5 × QD for Yb:YAG under continuous wave lasing conditions. The measured FTL values are then used to calculate the temperature distribution inside the crystals as a function of pump power, and the simulation results are found to be in very good agreement with the in-situ temperature measurements using contactless optical luminescence thermometry. The method and findings presented in this work hold great potential to benefit laser engineers and scientists working with cryogenic lasers to address and overcome temperature-dependent handicaps.
- 29 January 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (4) , 1144-1152
Challenges in power scaling of Cr:LiCAF lasers: effect of passive losses
In this work, we have investigated the continuous-wave (cw) lasing potential of thin slab-shaped Cr:LiCAF crystals with a low chromium doping level of around 1% and various lengths of 1 to 2 cm. These relatively long crystals with low Cr-doping facilitate the distribution of heat load in a larger volume and could enable power scaling of Cr:LiCAF lasers. However, long crystals tend to have larger passive losses, and it is also more challenging to achieve efficient mode-matching to the low-brightness pump mode in a longer gain element, which could hinder laser performance. To explore the issue, we have performed detailed cw lasing experiments in single- and multimode diode-pumped Cr:LiCAF laser systems employing crystals with different doping and length. Our results showed that current state-of-the-art crystal growth methods provide Cr:LiCAF crystals with low enough passive losses to enable cw laser efficiencies of up to 50%, even in these long samples. The pump powers available in this study (5.35 W) limited the cw powers we could achieve experimentally to 2.25 W level; however, our simulations indicate that thin slab-type Cr:LiCAF crystals with low Cr-doping have the potential to achieve cw powers above 10 W level.
- 29 January 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (4) , 1144-1152
Challenges in power scaling of Cr:LiCAF lasers: effect of passive losses
In this work, we have investigated the continuous-wave (cw) lasing potential of thin slab-shaped Cr:LiCAF crystals with a low chromium doping level of around 1% and various lengths of 1 to 2 cm. These relatively long crystals with low Cr-doping facilitate the distribution of heat load in a larger volume and could enable power scaling of Cr:LiCAF lasers. However, long crystals tend to have larger passive losses, and it is also more challenging to achieve efficient mode-matching to the low-brightness pump mode in a longer gain element, which could hinder laser performance. To explore the issue, we have performed detailed cw lasing experiments in single- and multimode diode-pumped Cr:LiCAF laser systems employing crystals with different doping and length. Our results showed that current state-of-the-art crystal growth methods provide Cr:LiCAF crystals with low enough passive losses to enable cw laser efficiencies of up to 50%, even in these long samples. The pump powers available in this study (5.35 W) limited the cw powers we could achieve experimentally to 2.25 W level; however, our simulations indicate that thin slab-type Cr:LiCAF crystals with low Cr-doping have the potential to achieve cw powers above 10 W level.
- 1 January 2024
- Published by Optica Publishing Group
- p. SM1H.7
Broadly tunable continuous wave (986-1119 nm) and mode-locked (1009-1061 nm) Yb:YVO4 laser
We present a broadly-tunable diode-pumped Yb:YVO4 laser with up to 4 W output in the 986-1119 nm range in continuous wave (CW) operation and 0.82 W output, with down to 70-fs pulses in mode-locked operation.
- 1 January 2024
- Published by Optica Publishing Group
- p. SM1H.7
Broadly tunable continuous wave (986-1119 nm) and mode-locked (1009-1061 nm) Yb:YVO4 laser
We present a broadly-tunable diode-pumped Yb:YVO4 laser with up to 4 W output in the 986-1119 nm range in continuous wave (CW) operation and 0.82 W output, with down to 70-fs pulses in mode-locked operation.